Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.czhttps://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
This patch provides a new implementation of the logic added by commit
137805f89 and later removed by 77ba61080. It differs from the original
primarily in expending much less effort per joinrel in large queries,
which it accomplishes by doing most of the matching work once per query not
once per joinrel. Hopefully, it's also less buggy and better commented.
The never-documented enable_fkey_estimates GUC remains gone.
There remains work to be done to make the selectivity estimates account
for nulls in FK referencing columns; but that was true of the original
patch as well. We may be able to address this point later in beta.
In the meantime, any error should be in the direction of overestimating
rather than underestimating joinrel sizes, which seems like the direction
we want to err in.
Tomas Vondra and Tom Lane
Discussion: <31041.1465069446@sss.pgh.pa.us>
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
Commit f3b5565dd4 was a couple of bricks shy
of a load; specifically, it missed putting pg_trigger_tgrelid_tgname_index
into the relcache init file, because that index is not used by any
syscache. However, we have historically nailed that index into cache for
performance reasons. The upshot was that load_relcache_init_file always
decided that the init file was busted and silently ignored it, resulting
in a significant hit to backend startup speed.
To fix, reinstantiate RelationIdIsInInitFile() as a wrapper around
RelationSupportsSysCache(), which can know about additional relations
that should be in the init file despite being unknown to syscache.c.
Also install some guards against future mistakes of this type: make
write_relcache_init_file Assert that all nailed relations get written to
the init file, and make load_relcache_init_file emit a WARNING if it takes
the "wrong number of nailed relations" exit path. Now that we remove the
init files during postmaster startup, that case should never occur in the
field, even if we are starting a minor-version update that added or removed
rels from the nailed set. So the warning shouldn't ever be seen by end
users, but it will show up in the regression tests if somebody breaks this
logic.
Back-patch to all supported branches, like the previous commit.
When we invalidate the relcache entry for a system catalog or index, we
must also delete the relcache "init file" if the init file contains a copy
of that rel's entry. The old way of doing this relied on a specially
maintained list of the OIDs of relations present in the init file: we made
the list either when reading the file in, or when writing the file out.
The problem is that when writing the file out, we included only rels
present in our local relcache, which might have already suffered some
deletions due to relcache inval events. In such cases we correctly decided
not to overwrite the real init file with incomplete data --- but we still
used the incomplete initFileRelationIds list for the rest of the current
session. This could result in wrong decisions about whether the session's
own actions require deletion of the init file, potentially allowing an init
file created by some other concurrent session to be left around even though
it's been made stale.
Since we don't support changing the schema of a system catalog at runtime,
the only likely scenario in which this would cause a problem in the field
involves a "vacuum full" on a catalog concurrently with other activity, and
even then it's far from easy to provoke. Remarkably, this has been broken
since 2002 (in commit 7863404417), but we had
never seen a reproducible test case until recently. If it did happen in
the field, the symptoms would probably involve unexpected "cache lookup
failed" errors to begin with, then "could not open file" failures after the
next checkpoint, as all accesses to the affected catalog stopped working.
Recovery would require manually removing the stale "pg_internal.init" file.
To fix, get rid of the initFileRelationIds list, and instead consult
syscache.c's list of relations used in catalog caches to decide whether a
relation is included in the init file. This should be a tad more efficient
anyway, since we're replacing linear search of a list with ~100 entries
with a binary search. It's a bit ugly that the init file contents are now
so directly tied to the catalog caches, but in practice that won't make
much difference.
Back-patch to all supported branches.
Buildfarm members with CLOBBER_CACHE_ALWAYS advised us that commit
85b506bbfc was mistaken in setting the relpersistence value of the
index directly in the relcache entry, within reindex_index. The reason
for the failure is that an invalidation message that comes after mucking
with the relcache entry directly, but before writing it to the catalogs,
would cause the entry to become rebuilt in place from catalogs with the
old contents, losing the update.
Fix by passing the correct persistence value to
RelationSetNewRelfilenode instead; this routine also writes the updated
tuple to pg_class, avoiding the problem. Suggested by Tom Lane.
rd_replidindex should be managed the same as rd_oidindex, and rd_keyattr
and rd_idattr should be managed like rd_indexattr. Omissions in this area
meant that the bitmapsets computed for rd_keyattr and rd_idattr would be
leaked during any relcache flush, resulting in a slow but permanent leak in
CacheMemoryContext. There was also a tiny probability of relcache entry
corruption if we ran out of memory at just the wrong point in
RelationGetIndexAttrBitmap. Otherwise, the fields were not zeroed where
expected, which would not bother the code any AFAICS but could greatly
confuse anyone examining the relcache entry while debugging.
Also, create an API function RelationGetReplicaIndex rather than letting
non-relcache code be intimate with the mechanisms underlying caching of
that value (we won't even mention the memory leak there).
Also, fix a relcache flush hazard identified by Andres Freund:
RelationGetIndexAttrBitmap must not assume that rd_replidindex stays valid
across index_open.
The aspects of this involving rd_keyattr date back to 9.3, so back-patch
those changes.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
This patch addresses the problem that applications currently have to
extract object names from possibly-localized textual error messages,
if they want to know for example which index caused a UNIQUE_VIOLATION
failure. It adds new error message fields to the wire protocol, which
can carry the name of a table, table column, data type, or constraint
associated with the error. (Since the protocol spec has always instructed
clients to ignore unrecognized field types, this should not create any
compatibility problem.)
Support for providing these new fields has been added to just a limited set
of error reports (mainly, those in the "integrity constraint violation"
SQLSTATE class), but we will doubtless add them to more calls in future.
Pavel Stehule, reviewed and extensively revised by Peter Geoghegan, with
additional hacking by Tom Lane.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
The previous code tried to synchronize by unlinking the init file twice,
but that doesn't actually work: it leaves a window wherein a third process
could read the already-stale init file but miss the SI messages that would
tell it the data is stale. The result would be bizarre failures in catalog
accesses, typically "could not read block 0 in file ..." later during
startup.
Instead, hold RelCacheInitLock across both the unlink and the sending of
the SI messages. This is more straightforward, and might even be a bit
faster since only one unlink call is needed.
This has been wrong since it was put in (in 2002!), so back-patch to all
supported releases.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
the relfilenode of currently-not-relocatable system catalogs.
1. Get rid of inval.c's dependency on relfilenode, by not having it emit
smgr invalidations as a result of relcache flushes. Instead, smgr sinval
messages are sent directly from smgr.c when an actual relation delete or
truncate is done. This makes considerably more structural sense and allows
elimination of a large number of useless smgr inval messages that were
formerly sent even in cases where nothing was changing at the
physical-relation level. Note that this reintroduces the concept of
nontransactional inval messages, but that's okay --- because the messages
are sent by smgr.c, they will be sent in Hot Standby slaves, just from a
lower logical level than before.
2. Move setNewRelfilenode out of catalog/index.c, where it never logically
belonged, into relcache.c; which is a somewhat debatable choice as well but
better than before. (I considered catalog/storage.c, but that seemed too
low level.) Rename to RelationSetNewRelfilenode.
3. Cosmetic cleanups of some other relfilenode manipulations.
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
To make this work in the base case, pg_database now has a nailed-in-cache
relation descriptor that is initialized using hardwired knowledge in
relcache.c. This means pg_database is added to the set of relations that
need to have a Schema_pg_xxx macro maintained in pg_attribute.h. When this
path is taken, we'll have to do a seqscan of pg_database to find the row
we need.
In the normal case, we are able to do an indexscan to find the database's row
by name. This is made possible by storing a global relcache init file that
describes only the shared catalogs and their indexes (and therefore is usable
by all backends in any database). A new backend loads this cache file,
finds its database OID after an indexscan on pg_database, and then loads
the local relcache init file for that database.
This change should effectively eliminate number of databases as a factor
in backend startup time, even with large numbers of databases. However,
the real reason for doing it is as a first step towards getting rid of
the flat files altogether. There are still several other sub-projects
to be tackled before that can happen.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
stale relcache init files (pg_internal.init), and there is no mechanism for
updating them during WAL replay. Easiest solution is just to delete the init
files at conclusion of startup, and let the first backend started in each
database take care of rebuilding the init file. Simon Riggs and Tom Lane.
Back-patched to 8.1. Arguably this should be fixed in 8.0 too, but it would
require significantly more code since 8.0 has no handy startup-time scan of
pg_database to piggyback on. Manual solution of the problem is possible
in 8.0 (just delete the pg_internal.init files before starting WAL replay),
so that may be a sufficient answer.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
it's not necessary to have three separate calls anymore. This patch also
fixes things so we don't try to read pg_internal.init until after we've
obtained lock on the target database; which was fairly harmless, but it's
certainly cleaner this way.
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
indexes. Extend the macros in include/catalog/*.h to carry the info
about hand-assigned OIDs, and adjust the genbki script and bootstrap
code to make the relations actually get those OIDs. Remove the small
number of RelOid_pg_foo macros that we had in favor of a complete
set named like the catname.h and indexing.h macros. Next phase will
get rid of internal use of names for looking up catalogs and indexes;
but this completes the changes forcing an initdb, so it looks like a
good place to commit.
Along the way, I made the shared relations (pg_database etc) not be
'bootstrap' relations any more, so as to reduce the number of hardwired
entries and simplify changing those relations in future. I'm not
sure whether they ever really needed to be handled as bootstrap
relations, but it seems to work fine to not do so now.
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
