This adds support for load balancing connections with libpq using a
connection parameter: load_balance_hosts=<string>. When setting the
param to random, hosts and addresses will be connected to in random
order. This then results in load balancing across these addresses and
hosts when multiple clients or frequent connection setups are used.
The randomization employed performs two levels of shuffling:
1. The given hosts are randomly shuffled, before resolving them
one-by-one.
2. Once a host its addresses get resolved, the returned addresses
are shuffled, before trying to connect to them one-by-one.
Author: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Andrey Borodin <amborodin86@gmail.com>
Discussion: https://postgr.es/m/PR3PR83MB04768E2FF04818EEB2179949F7A69@PR3PR83MB0476.EURPRD83.prod.outlook.
When there are multiple publications for a subscription and one of those
publishes via the parent table by using publish_via_partition_root and the
other one directly publishes the child table, we end up copying the same
data twice during initial synchronization. The reason for this was that we
get both the parent and child tables from the publisher and try to copy
the data for both of them.
This patch extends the function pg_get_publication_tables() to take a
publication list as its input parameter. This allows us to exclude a
partition table whose ancestor is published by the same publication list.
This problem does exist in back-branches but we decide to fix it there in
a separate commit if required. The fix for back-branches requires quite
complicated changes to fetch the required table information from the
publisher as we can't update the function pg_get_publication_tables() in
back-branches. We are not sure whether we want to deviate and complicate
the code in back-branches for this problem as there are no field reports
yet.
Author: Wang wei
Reviewed-by: Peter Smith, Jacob Champion, Kuroda Hayato, Vignesh C, Osumi Takamichi, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
The sslcertmode option controls whether the server is allowed and/or
required to request a certificate from the client. There are three
modes:
- "allow" is the default and follows the current behavior, where a
configured client certificate is sent if the server requests one
(via one of its default locations or sslcert). With the current
implementation, will happen whenever TLS is negotiated.
- "disable" causes the client to refuse to send a client certificate
even if sslcert is configured or if a client certificate is available in
one of its default locations.
- "require" causes the client to fail if a client certificate is never
sent and the server opens a connection anyway. This doesn't add any
additional security, since there is no guarantee that the server is
validating the certificate correctly, but it may helpful to troubleshoot
more complicated TLS setups.
sslcertmode=require requires SSL_CTX_set_cert_cb(), available since
OpenSSL 1.0.2. Note that LibreSSL does not include it.
Using a connection parameter different than require_auth has come up as
the simplest design because certificate authentication does not rely
directly on any of the AUTH_REQ_* codes, and one may want to require a
certificate to be sent in combination of a given authentication method,
like SCRAM-SHA-256.
TAP tests are added in src/test/ssl/, some of them relying on sslinfo to
check if a certificate has been set. These are compatible across all
the versions of OpenSSL supported on HEAD (currently down to 1.0.1).
Author: Jacob Champion
Reviewed-by: Aleksander Alekseev, Peter Eisentraut, David G. Johnston,
Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
This is evidently not required by most compilers, but buildfarm
member fairywren is unhappy without it. It looks like the meson
infrastructure has this right already.
Currently, in read committed transaction isolation mode (default), we have the
following sequence of actions when tuple_update()/tuple_delete() finds
the tuple updated by concurrent transaction.
1. Attempt to update/delete tuple with tuple_update()/tuple_delete(), which
returns TM_Updated.
2. Lock tuple with tuple_lock().
3. Re-evaluate plan qual (recheck if we still need to update/delete and
calculate the new tuple for update).
4. Second attempt to update/delete tuple with tuple_update()/tuple_delete().
This attempt should be successful, since the tuple was previously locked.
This patch eliminates step 2 by taking the lock during first
tuple_update()/tuple_delete() call. Heap table access method saves some
efforts by checking the updated tuple once instead of twice. Future
undo-based table access methods, which will start from the latest row version,
can immediately place a lock there.
The code in nodeModifyTable.c is simplified by removing the nested switch/case.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
Support for SCM credential authentication has been removed in the
backend in 9.1, and libpq has kept some code to handle it for
compatibility.
Commit be4585b, that did the cleanup of the backend code, has done
so because the code was not really portable originally. And, as there
are likely little chances that this is used these days, this removes the
remaining code from libpq. An error will now be raised by libpq if
attempting to connect to a server that returns AUTH_REQ_SCM_CREDS,
instead.
References to SCM credential authentication are removed from the
protocol documentation. This removes some meson and configure checks.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZBLH8a4otfqgd6Kn@paquier.xyz
This structure included only PgStat_FunctionCounts, and removing it
facilitates some upcoming refactoring for pgstatfuncs.c to use more
macros rather that mostly-duplicated functions.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/11d531fe-52fc-c6ea-7e8e-62f1b6ec626e@gmail.com
The changes in b6a0d469ca prevented installation of the test files during a
normal install. However, the buildfarm intentionally tries to trun the tests
against a "real" installation. The new install-test-files target provides that
ability.
Because we want to install into a normal directory, I removed the necessary
munging of the target paths from meson.build and moved it into
install-test-files. I also added DESTDIR support, so that installing can
redirect the directory if desired. That's used for the tmp_install/
installation now.
I didn't like the number of arguments necessary for install_test_files, so I
changed it to use
--install target list of files
which makes it easier to use for further directories, if/when we need them.
Discussion: https://postgr.es/m/20230308012940.edexipb3vqylcu6r@awork3.anarazel.de
We allow our header files to depend on the appropriate one of
postgres.h, postgres_fe.h, or c.h having already been included.
However, there are a few headers such as libpq-fe.h that are
meant to be used by client applications and therefore must
compile without any assumptions about previous inclusions.
These test scripts failed to consider that, which seems quite
hazardous since we might not immediately notice such a problem
otherwise. Hence, adjust these scripts to test relevant libpq
and ecpg headers with no prior inclusion.
While at it, we can also make an effort to actually use the
relevant one of postgres.h, postgres_fe.h, or c.h. I added
some rules that guess which one to use based on the first-level
src subdirectory, e.g. use postgres_fe.h under src/bin/.
These rules are hardly water-tight but they seem to work today,
and we can always refine them in the future.
These changes don't reveal any live problems today, which is good,
but they should make these scripts more able to catch future bugs.
Discussion: https://postgr.es/m/2488193.1677863247@sss.pgh.pa.us
Previously, meson installed modules under src/test/modules/ as part of
a normal installation, even though these files are only meant for use
by tests. This is because there is no way to set up up the build
system to install extra things only when told.
This patch fixes that with a workaround: We don't install these
modules as part of meson install, but we create a new "test" that runs
before the real tests whose action it is to install these files. The
installation is done by manual copies using a small helper script.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/2a039e8e-f31f-31e8-afe7-bab3130ad2de%40enterprisedb.com
It's been this way for a very long time, but it appears to have been
masking an issue that only manifests with different settings. Therefore,
run the tests in the installation's default encoding/locale.
Backpatch to all live branches.
Expand pg_dump's compression streaming and file APIs to support the lz4
algorithm. The newly added compress_lz4.{c,h} files cover all the
functionality of the aforementioned APIs. Minor changes were necessary
in various pg_backup_* files, where code for the 'lz4' file suffix has
been added, as well as pg_dump's compression option parsing.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Rachel Heaton, Justin Pryzby, Shi Yu, Tomas Vondra
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss%3D%40protonmail.com
Switch pg_dump to use the Compression API, implemented by bf9aa490db.
The CompressFileHandle replaces the cfp* family of functions with a
struct of callbacks for accessing (compressed) files. This allows adding
new compression methods simply by introducing a new struct instance with
appropriate implementation of the callbacks.
Archives compressed using custom compression methods store an identifier
of the compression algorithm in their header instead of the compression
level. The header version is bumped.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Rachel Heaton, Justin Pryzby, Tomas Vondra
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss%3D%40protonmail.com
A new callback named startup_cb, called shortly after a module is
loaded, is added. This makes possible the initialization of any
additional state data required by a module. This initial state data can
be saved in a ArchiveModuleState, that is now passed down to all the
callbacks that can be defined in a module. With this design, it is
possible to have a per-module state, aimed at opening the door to the
support of more than one archive module.
The initialization of the callbacks is changed so as
_PG_archive_module_init() does not anymore give in input a
ArchiveModuleCallbacks that a module has to fill in with callback
definitions. Instead, a module now needs to return a const
ArchiveModuleCallbacks.
All the structure and callback definitions of archive modules are moved
into their own header, named archive_module.h, from pgarch.h.
Command-based archiving follows the same line, with a new set of files
named shell_archive.{c,h}.
There are a few more items that are under discussion to improve the
design of archive modules, like the fact that basic_archive calls
sigsetjmp() by itself to define its own error handling flow. These will
be adjusted later, the changes done here cover already a good portion
of what has been discussed.
Any modules created for v15 will need to be adjusted to this new
design.
Author: Nathan Bossart
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20230130194810.6fztfgbn32e7qarj@awork3.anarazel.de
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
Previously make_etags always ran make_ctags -e when make_etags was
executed. However, because non-Exuberant ctags on Mac does not
support -e option (and also on other platforms including old Linux),
ctags failed. To avoid the failure change make_ctags so that if
non-Exuberant ctags is used and ctags -e option is requested, run
etags command instead. If etags command does not exist, make_ctags
will fail.
Also refactor make_ctags and tweak make_etags to emit proper usage
message.
Author: Fujii Masao
Reviewed-by: Tatsuo Ishii
Discussion: https://www.postgresql.org/message-id/369c13b9-8b0f-d6f9-58fc-61258ec8f713%40oss.nttdata.com
Now that we have the sources for pg_bsd_indent in our code base these
are redundant.
It is now required to provide a list of files or directories to pgindent,
either by using --commit or on the command line. The equivalent of
previously running pgindent with no parameters is now `pgindent .`
Some extra checks are also added. duplicate files in the file list are
skipped, and there is a warning if no files are specified.
If the --commit option is used, the script now chdir's to the source
root, as git always reports files relative to that. (Fixes a gripe from
Justin Pryzby)
Reviewed by Tom Lane
Discussion: https://postgr.es/m/842819.1676219054@sss.pgh.pa.us
Update the Makefile and build directions for in-tree build,
and add Meson build infrastructure. Also convert the ad-hoc
test target into a TAP test.
Currently, the Make build system will not build pg_bsd_indent
by default, while the Meson system will. Both will test it
during "make check-world" or "ninja test". Neither will install
it automatically. (We might change some of these decisions later.)
Also fix a few portability nits noted during early testing.
Also, exclude pg_bsd_indent from pgindent's purview; at least for
now, we'll leave it formatted similarly to the FreeBSD original.
Tom Lane and Andres Freund
Discussion: https://postgr.es/m/3935719.1675967430@sss.pgh.pa.us
Discussion: https://postgr.es/m/20200812223409.6di3y2qsnvynao7a@alap3.anarazel.de
Builds on 28e626bde0 and f30d62c2fc. See the former for motivation.
Rows of the view show IO operations for a particular backend type, IO target
object, IO context combination (e.g. a client backend's operations on
permanent relations in shared buffers) and each column in the view is the
total number of IO Operations done (e.g. writes). So a cell in the view would
be, for example, the number of blocks of relation data written from shared
buffers by client backends since the last stats reset.
In anticipation of tracking WAL IO and non-block-oriented IO (such as
temporary file IO), the "op_bytes" column specifies the unit of the "reads",
"writes", and "extends" columns for a given row.
Rows for combinations of IO operation, backend type, target object and context
that never occur, are ommitted entirely. For example, checkpointer will never
operate on temporary relations.
Similarly, if an IO operation never occurs for such a combination, the IO
operation's cell will be null, to distinguish from 0 observed IO
operations. For example, bgwriter should not perform reads.
Note that some of the cells in the view are redundant with fields in
pg_stat_bgwriter (e.g. buffers_backend). For now, these have been kept for
backwards compatibility.
Bumps catversion.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Samay Sharma <smilingsamay@gmail.com>
Reviewed-by: Maciek Sakrejda <m.sakrejda@gmail.com>
Reviewed-by: Lukas Fittl <lukas@fittl.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200124195226.lth52iydq2n2uilq@alap3.anarazel.de
This commit adds the infrastructure for more detailed IO statistics. The calls
to actually count IOs, a system view to access the new statistics,
documentation and tests will be added in subsequent commits, to make review
easier.
While we already had some IO statistics, e.g. in pg_stat_bgwriter and
pg_stat_database, they did not provide sufficient detail to understand what
the main sources of IO are, or whether configuration changes could avoid
IO. E.g., pg_stat_bgwriter.buffers_backend does contain the number of buffers
written out by a backend, but as that includes extending relations (always
done by backends) and writes triggered by the use of buffer access strategies,
it cannot easily be used to tune background writer or checkpointer. Similarly,
pg_stat_database.blks_read cannot easily be used to tune shared_buffers /
compute a cache hit ratio, as the use of buffer access strategies will often
prevent a large fraction of the read blocks to end up in shared_buffers.
The new IO statistics count IO operations (evict, extend, fsync, read, reuse,
and write), and are aggregated for each combination of backend type (backend,
autovacuum worker, bgwriter, etc), target object of the IO (relations, temp
relations) and context of the IO (normal, vacuum, bulkread, bulkwrite).
What is tracked in this series of patches, is sufficient to perform the
aforementioned analyses. Further details, e.g. tracking the number of buffer
hits, would make that even easier, but was left out for now, to keep the scope
of the already large patchset manageable.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200124195226.lth52iydq2n2uilq@alap3.anarazel.de
A new --commit option will add all the files in a commit to the file
list. The option can be specified more than once.
Also, if a directory is given on the command line, all the files in that
directory tree will be added to the file list.
Per suggestions from Robert Haas
Reviewed by Jelte Fennema
Discussion: https://postgr.es/m/CA+TgmoY59Ksso81RNLArNxj0a7xaqV_F_u7gSMHbgdc2kG5Vpw@mail.gmail.com
The DDLs like Refresh Materialized views that generate lots of temporary
data due to rewrite rules may not be processed by output plugins (for
example pgoutput). So, we won't send keep-alive messages for a long time
while processing such commands and that can lead the subscriber side to
timeout. We have previously fixed a similar case for large transactions in
commit f95d53eded where the output plugin filters all or most of the
changes but missed to handle the DDLs.
We decided not to backpatch this as this adds a new callback in the
existing exposed structure and moreover, users can increase the
wal_sender_timeout and wal_receiver_timeout to avoid this problem.
Author: Wang wei, Hou Zhijie
Reviewed-by: Peter Smith, Ashutosh Bapat, Shi yu, Amit Kapila
Discussion: https://postgr.es/m/OS3PR01MB6275478E5D29E4A563302D3D9E2B9@OS3PR01MB6275.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/CAA5-nLARN7-3SLU_QUxfy510pmrYK6JJb=bk3hcgemAM_pAv+w@mail.gmail.com
This reverts commits 24c35ec and 57169ad. PreRestoreCommand() and
PostRestoreCommand() need to be put closer to the system() call calling
a restore_command, as they enable in_restore_command for the startup
process which would in turn trigger an immediate proc_exit() in the
SIGTERM handler. Perhaps we could get rid of this behavior entirely,
but 24c35ec has made the window where the flag is enabled much larger
than it was, and any Postgres-like actions (palloc, etc.) taken by code
paths while the flag is enabled could lead to more severe issues in the
shutdown processing.
Note that curculio has showed that there are much more problems in this
area, unrelated to this change, actually, hence the issues related to
that had better be addressed first. Keeping the code of HEAD in line
with the stable branches should make that a bit easier.
Per discussion with Andres Freund and Nathan Bossart.
Discussion: https://postgr.es/m/Y979NR3U5VnWrTwB@paquier.xyz
Installing with plain cpan failed for me recently, as the archive it
searched has been purged of old releases. However, you can give cpanm a
complete URL to the exact version you want to install, so document using
that.
Rename the developer option 'logical_decoding_mode' to the more flexible
name 'logical_replication_mode' because doing so will make it easier to
extend this option in the future to help test other areas of logical
replication.
Currently, it is used on the publisher side to allow streaming or
serializing each change in logical decoding. In the upcoming patch, we are
planning to use it on the subscriber. On the subscriber, it will allow
serializing the changes to file and notifies the parallel apply workers to
read and apply them at the end of the transaction.
We discussed exposing this parameter as a subscription option but
it did not seem advisable since it is primarily used for testing/debugging
and there is no other such parameter. We also discussed having separate
GUCs for publisher and subscriber but for current testing/debugging
requirements, one GUC is sufficient.
Author: Hou Zhijie
Reviewed-by: Peter Smith, Kuroda Hayato, Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoAy2c=Mx=FTCs+EwUsf2kQL5MmU3N18X84k0EmCXntK4g@mail.gmail.com
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
This includes a unification of the logic used to find the excludes file
and the typedefs file.
Also, remove the dangerous and deprecated feature where the first
non-option argument was taken as a typdefs file if it wasn't a .c or .h
file, remove some extraneous blank lines, and improve the documentation
somewhat.
This makes two small changes that will improve pgindent's usefulness in
a git hook. First, it looks for the exclude file relative to the current
directory. And second, it applies the filters to filenames given on the
command line as well as those found in a directory sweep.
It might prove necessary to make further efforts to find the exclude
file, and even to allow multiple exclude files, but for now this should
be enough for most purposes.
Reviewed by Jelte Fennema
At least on my machine, the initial coding of this didn't actually
work, because interpolation of "$post_fh->filename" doesn't act
as intended.
I threw in some double quotes too, just in case anybody tries
to run this in a path containing spaces.
This adds two modes of running pgindent, neither of which results in
any changes being made to the source code. The --show-diff option shows
what changes would have been made, and the --silent-diff option just
exits with a status of 2 if any changes would be made. The second of
these is intended for scripting use in places such as git hooks.
Along the way some code cleanup is done, and a --help option is also
added.
Reviewed by Tom Lane
Discussion: https://postgr.es/m/c9c9fa6d-6de6-48c2-4f8b-0fbeef026439@dunslane.net
An upcoming patch by Melanie Plageman does some refactoring work in this
area. Run pgindent on that file now before making any changes so that
it's easier to maintain/evolve each of the individual patches doing the
refactor work. Additionally, add a few new required typedefs to the list
to make it easier to do future pgindent runs on this file during the
refactor work.
Discussion: https://postgr.es/m/CAAKRu_YSOnhKsDyFcqJsKtBSrd32DP-jjXmv7hL0BPD-z0TGXQ@mail.gmail.com
Presently, restore_command uses a different code path than
archive_cleanup_command and recovery_end_command. These code paths
are similar and can be easily combined, as long as it is possible to
identify if a command should:
- Issue a FATAL on signal.
- Exit immediately on SIGTERM.
While on it, this removes src/common/archive.c and its associated
header. Since the introduction of c96de2c, BuildRestoreCommand() has
become a simple wrapper of replace_percent_placeholders() able to call
make_native_path(). This simplifies shell_restore.c as long as
RestoreArchivedFile() includes a call to make_native_path().
Author: Nathan Bossart
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
Windows can enumerate the locales that are either installed or
supported by calling EnumSystemLocalesEx(), similar to what is already
done in the READ_LOCALE_A_OUTPUT switch. We can refactor some of the
logic already used in that switch into a new function
create_collation_from_locale().
The enumerated locales have BCP 47 shape, that is with a hyphen
between language and territory, instead of POSIX's underscore. The
created collations will retain the BCP 47 shape, but we will also
create a POSIX alias, so xx-YY will have an xx_YY alias.
A new test collate.windows.win1252 is added that is like
collate.linux.utf8.
Author: Juan Jose Santamaria Flecha <juanjo.santamaria@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/0050ec23-34d9-2765-9015-98c04f0e18ac@postgrespro.ru
This enables streaming or serializing changes immediately in logical
decoding. This parameter is intended to be used to test logical decoding
and replication of large transactions for which otherwise we need to
generate the changes till logical_decoding_work_mem is reached.
This helps in reducing the timing of existing tests related to logical
replication of in-progress transactions and will help in writing tests for
for the upcoming feature for parallelly applying large in-progress
transactions.
Author: Shi yu
Reviewed-by: Sawada Masahiko, Shveta Mallik, Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi
Discussion: https://postgr.es/m/OSZPR01MB63104E7449DBE41932DB19F1FD1B9@OSZPR01MB6310.jpnprd01.prod.outlook.com
