There was a pg_isblank() function that claimed to be a replacement for
the standard isblank() function, which was thought to be "not very
portable yet". We can now assume that it's portable (it's in C99).
But pg_isblank() actually diverged from the standard isblank() by also
accepting '\r', while the standard one only accepts space and tab.
This was added to support parsing pg_hba.conf under Windows. But the
hba parsing code now works completely differently and already handles
line endings before we get to pg_isblank(). The other user of
pg_isblank() is for ident protocol message parsing, which also handles
'\r' separately. So this behavior is now obsolete and confusing.
To improve clarity, I separated those concerns. The ident parsing now
gets its own function that hardcodes the whitespace characters
mentioned by the relevant RFC. pg_isblank() is now static in hba.c
and is a wrapper around the standard isblank(), with some extra logic
to ensure robust treatment of non-ASCII characters.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/170308e6-a7a3-4484-87b2-f960bb564afa%40eisentraut.org
Solaris has never bothered to add "const" to the second argument
of PAM conversation procs, as all other Unixen did decades ago.
This resulted in an "incompatible pointer" compiler warning when
building --with-pam, but had no more serious effect than that,
so we never did anything about it. However, as of GCC 14 the
case is an error not warning by default.
To complicate matters, recent OpenIndiana (and maybe illumos
in general?) *does* supply the "const" by default, so we can't
just assume that platforms using our solaris template need help.
What we can do, short of building a configure-time probe,
is to make solaris.h #define _PAM_LEGACY_NONCONST, which
causes OpenIndiana's pam_appl.h to revert to the traditional
definition, and hopefully will have no effect anywhere else.
Then we can use that same symbol to control whether we include
"const" in the declaration of pam_passwd_conv_proc().
Bug: #18995
Reported-by: Andrew Watkins <awatkins1966@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18995-82058da9ab4337a7@postgresql.org
Backpatch-through: 13
A 'void *' argument suggests that the caller might pass an arbitrary
struct, which is appropriate for functions like libc's read/write, or
pq_sendbytes(). 'uint8 *' is more appropriate for byte arrays that
have no structure, like the cancellation keys or SCRAM tokens. Some
places used 'char *', but 'uint8 *' is better because 'char *' is
commonly used for null-terminated strings. Change code around SCRAM,
MD5 authentication, and cancellation key handling to follow these
conventions.
Discussion: https://www.postgresql.org/message-id/61be9e31-7b7d-49d5-bc11-721800d89d64@eisentraut.org
Convert the boolean log_connections GUC into a list GUC comprised of the
connection aspects to log.
This gives users more control over the volume and kind of connection
logging.
The current log_connections options are 'receipt', 'authentication', and
'authorization'. The empty string disables all connection logging. 'all'
enables all available connection logging.
For backwards compatibility, the most common values for the
log_connections boolean are still supported (on, off, 1, 0, true, false,
yes, no). Note that previously supported substrings of on, off, true,
false, yes, and no are no longer supported.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
This commit implements OAUTHBEARER, RFC 7628, and OAuth 2.0 Device
Authorization Grants, RFC 8628. In order to use this there is a
new pg_hba auth method called oauth. When speaking to a OAuth-
enabled server, it looks a bit like this:
$ psql 'host=example.org oauth_issuer=... oauth_client_id=...'
Visit https://oauth.example.org/login and enter the code: FPQ2-M4BG
Device authorization is currently the only supported flow so the
OAuth issuer must support that in order for users to authenticate.
Third-party clients may however extend this and provide their own
flows. The built-in device authorization flow is currently not
supported on Windows.
In order for validation to happen server side a new framework for
plugging in OAuth validation modules is added. As validation is
implementation specific, with no default specified in the standard,
PostgreSQL does not ship with one built-in. Each pg_hba entry can
specify a specific validator or be left blank for the validator
installed as default.
This adds a requirement on libcurl for the client side support,
which is optional to build, but the server side has no additional
build requirements. In order to run the tests, Python is required
as this adds a https server written in Python. Tests are gated
behind PG_TEST_EXTRA as they open ports.
This patch has been a multi-year project with many contributors
involved with reviews and in-depth discussions: Michael Paquier,
Heikki Linnakangas, Zhihong Yu, Mahendrakar Srinivasarao, Andrey
Chudnovsky and Stephen Frost to name a few. While Jacob Champion
is the main author there have been some levels of hacking by others.
Daniel Gustafsson contributed the validation module and various bits
and pieces; Thomas Munro wrote the client side support for kqueue.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Kashif Zeeshan <kashi.zeeshan@gmail.com>
Discussion: https://postgr.es/m/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
Remove src/port/user.c, call getpwuid_r() directly. This reduces some
complexity and allows better control of the error behavior. For
example, the old code would in some circumstances silently truncate
the result string, or produce error message strings that the caller
wouldn't use.
src/port/user.c used to be called src/port/thread.c and contained
various portability complications to support thread-safety. These are
all obsolete, and all but the user-lookup functions have already been
removed. This patch completes this by also removing the user-lookup
functions.
Also convert src/backend/libpq/auth.c to use getpwuid_r() for
thread-safety.
Originally, I tried to be overly correct by using
sysconf(_SC_GETPW_R_SIZE_MAX) to get the buffer size for getpwuid_r(),
but that doesn't work on FreeBSD. All the OS where I could find the
source code internally use 1024 as the suggested buffer size, so I
just ended up hardcoding that. The previous code used BUFSIZ, which
is an unrelated constant from stdio.h, so its use seemed
inappropriate.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/5f293da9-ceb4-4937-8e52-82c25db8e4d3%40eisentraut.org
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
CheckPWChallengeAuth() would return STATUS_ERROR if the user does not
exist or has no password assigned, even if the client disconnected
without responding to the password challenge (as libpq often will,
for example). We should return STATUS_EOF in that case, and the
lower-level functions do, but this code level got it wrong since the
refactoring done in 7ac955b34. This breaks the intent of not logging
anything for EOF cases (cf. comments in auth_failed()) and might
also confuse users of ClientAuthentication_hook.
Per report from Liu Lang. Back-patch to all supported versions.
Discussion: https://postgr.es/m/b725238c-539d-cb09-2bff-b5e6cb2c069c@esgyn.cn
Adding an extra LOG for connections that have not set an authn ID, like
when the "trust" authentication method is used, is useful for audit
purposes.
A couple of TAP tests for SSL and authentication need to be tweaked to
adapt to this new LOG generated, as some scenarios expected no logs but
they now get a hit.
Reported-by: Shaun Thomas
Author: Jacob Champion
Reviewed-by: Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/CAFdbL1N7-GF-ZXKaB3XuGA+CkSmnjFvqb8hgjMnDfd+uhL2u-A@mail.gmail.com
This commit introduces descriptively-named macros for the
identifiers used in wire protocol messages. These new macros are
placed in a new header file so that they can be easily used by
third-party code.
Author: Dave Cramer
Reviewed-by: Alvaro Herrera, Tatsuo Ishii, Peter Smith, Robert Haas, Tom Lane, Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/CADK3HHKbBmK-PKf1bPNFoMC%2BoBt%2BpD9PH8h5nvmBQskEHm-Ehw%40mail.gmail.com
Comments in src/backend/libpq/auth.c say: (after successfully finding
the final DN to check the user-supplied password against)
/* Unbind and disconnect from the LDAP server */
and later
/*
* Need to re-initialize the LDAP connection, so that we can bind to
* it with a different username.
*/
But the protocol actually permits multiple subsequent authentications
("binds") over a single connection.
So, it seems like the whole connection re-initialization thing was
just a confusion and can be safely removed, thus saving quite a few
network round-trips, especially for the case of ldaps/starttls.
Author: Anatoly Zaretsky <anatoly.zaretsky@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALbq6kmJ-1+58df4B51ctPfTOSyPbY8Qi2=ct8oR=i4TamkUoQ@mail.gmail.com
WHen building with GSSAPI support, explicitly require MIT Kerberos and
check for gssapi_ext.h in configure.ac and meson.build. Also add
documentation explicitly stating that we now require MIT Kerberos when
building with GSSAPI support.
Reveiwed by: Johnathan Katz
Discussion: https://postgr.es/m/abcc73d0-acf7-6896-e0dc-f5bc12a61bb1@postgresql.org
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
The hook can be installed by a shared_preload library.
A similar mechanism could be used for radius paswords, for example, and
the type name auth_password_hook_typ has been shosen with that in mind.
John Naylor and Andrew Dunstan
Discussion: https://postgr.es/m/469b06ed-69de-ba59-c13a-91d2372e52a9@dunslane.net
This has the advantage to limit the presence of the GUC values
hba_file and ident_file to the code paths where these files are loaded,
easing the introduction of an upcoming feature aimed at adding inclusion
logic for files and directories in HBA and ident files.
Note that this needs the addition of the source file name to HbaLine, in
addition to the line number, which is something needed by the backend in
two places of auth.c (authentication failure details and auth_id log
when log_connections is enabled).
While on it, adjust a log generated on authentication failure to report
the name of the actual HBA file on which the connection attempt matched,
where the line number and the raw line written in the HBA file were
already included. This was previously hardcoded as pg_hba.conf, which
would be incorrect when a custom value is used at postmaster startup for
the GUC hba_file.
Extracted from a larger patch by the same author.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
This change impacts the backend-side code in charge of starting a LDAP
TLS session. It is a bit sad that it is not possible to unify the WIN32
and non-WIN32 code paths, but the different number of arguments for both
discard this possibility.
This is similar to 47bd0b3, where this replaces the last function
loading that seems worth it, any others being either environment or
version-dependent.
Reported-by: Thomas Munro
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/Yx0rxpNgDh8tN4XA@paquier.xyz
The LDAP wiki states that the search message should be freed regardless
of the return value of ldap_search_s(), but we failed to do so in one
backend code path when searching LDAP with a filter. This is not
critical in an authentication code path failing in the backend as this
causes such the process to exit promptly, but let's be clean and free
the search message appropriately, as documented by upstream.
All the other code paths failing a LDAP operation do that already, and
somebody looking at this code in the future may miss what LDAP expects
with the search message.
Author: Zhihong Yu
Discussion: https://postgr.es/m/CALNJ-vTf5Y+8RtzZ4GjOGE9qWVHZ8awfhnFYc_qGm8fMLUNRAg@mail.gmail.com
This commit changes the following code paths to do direct system calls
to some WIN32 functions rather than loading them from an external
library, shaving some code in the process:
- Creation of restricted tokens in pg_ctl.c, introduced by a25cd81.
- QuerySecurityContextToken() in auth.c for SSPI authentication in the
backend, introduced in d602592.
- CreateRestrictedToken() in src/common/. This change is similar to the
case of pg_ctl.c.
Most of these functions were loaded rather than directly called because,
as mentioned in the code comments, MinGW headers were not declaring
them. I have double-checked the recent MinGW code, and all the
functions changed here are declared in its headers, so this change
should be safe. Note that I do not have a MinGW environment at hand so
I have not tested it directly, but that MSVC was fine with the change.
The buildfarm will tell soon enough if this change is appropriate or not
for a much broader set of environments.
A few code paths still use GetProcAddress() to load some functions:
- LDAP authentication for ldap_start_tls_sA(), where I am not confident
that this change would work.
- win32env.c and win32ntdll.c where we have a per-MSVC version
dependency for the name of the library loaded.
- crashdump.c for MiniDumpWriteDump() and EnumDirTree(), where direct
calls were not able to work after testing.
Reported-by: Thomas Munro
Reviewed-by: Justin Prysby
Discussion: https://postgr.es/m/CA+hUKG+BMdcaCe=P-EjMoLTCr3zrrzqbcVE=8h5LyNsSVHKXZA@mail.gmail.com
SUSv3 <netinet/in.h> defines struct sockaddr_in6, and all targeted Unix
systems have it. Windows has it in <ws2ipdef.h>. Remove the configure
probe, the macro and a small amount of dead code.
Also remove a mention of IPv6-less builds from the documentation, since
there aren't any.
This is similar to commits f5580882 and 077bf2f2 for Unix sockets. Even
though AF_INET6 is an "optional" component of SUSv3, there are no known
modern operating system without it, and it seems even less likely to be
omitted from future systems than AF_UNIX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
In a similar effort to f01592f91, here we're targetting fixing the
warnings where we've deemed the shadowing variable to serve a close enough
purpose to the shadowed variable just to reuse the shadowed version and
not declare the shadowing variable at all.
By my count, this takes the warning count from 106 down to 71.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220825020839.GT2342@telsasoft.com
This commit moves authn_id into a new global structure called
ClientConnectionInfo (mapping to a MyClientConnectionInfo for each
backend) which is intended to hold all the client information that
should be shared between the backend and any of its parallel workers,
access for extensions and triggers being the primary use case. There is
no need to push all the data of Port to the workers, and authn_id is
quite a generic concept so using a separate structure provides the best
balance (the name of the structure has been suggested by Robert Haas).
While on it, and per discussion as this would be useful for a potential
SYSTEM_USER that can be accessed through parallel workers, a second
field is added for the authentication method, copied directly from
Port.
ClientConnectionInfo is serialized and restored using a new parallel
key and a structure tracks the length of the authn_id, making the
addition of more fields straight-forward.
Author: Jacob Champion
Reviewed-by: Bertrand Drouvot, Stephen Frost, Robert Haas, Tom Lane,
Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/793d990837ae5c06a558d58d62de9378ab525d83.camel@vmware.com
The standard way to check for list emptiness is to compare the
List pointer to NIL; our list code goes out of its way to ensure
that that is the only representation of an empty list. (An
acceptable alternative is a plain boolean test for non-null
pointer, but explicit mention of NIL is usually preferable.)
Various places didn't get that memo and expressed the condition
with list_length(), which might not be so bad except that there
were such a variety of ways to check it exactly: equal to zero,
less than or equal to zero, less than one, yadda yadda. In the
name of code readability, let's standardize all those spellings
as "list == NIL" or "list != NIL". (There's probably some
microscopic efficiency gain too, though few of these look to be
at all performance-critical.)
A very small number of cases were left as-is because they seemed
more consistent with other adjacent list_length tests that way.
Peter Smith, with bikeshedding from a number of us
Discussion: https://postgr.es/m/CAHut+PtQYe+ENX5KrONMfugf0q6NHg4hR5dAhqEXEc2eefFeig@mail.gmail.com
The point of this patch is to reduce inclusion spam by not needing
to #include <netdb.h> or <pwd.h> in port.h (which is read by every
compile in our tree). To do that, we must remove port.h's
declarations of pqGetpwuid and pqGethostbyname.
pqGethostbyname is only used, and is only ever likely to be used,
in src/port/getaddrinfo.c --- which isn't even built on most
platforms, making pqGethostbyname dead code for most people.
Hence, deal with that by just moving it into getaddrinfo.c.
To clean up pqGetpwuid, invent a couple of simple wrapper
functions with less-messy APIs. This allows removing some
duplicate error-handling code, too.
In passing, remove thread.c from the MSVC build, since it
contains nothing we use on Windows.
Noted while working on 376ce3e40.
Discussion: https://postgr.es/m/1634252654444.90107@mit.edu
The existing cryptohash facility was causing problems in some code paths
related to MD5 (frontend and backend) that relied on the fact that the
only type of error that could happen would be an OOM, as the MD5
implementation used in PostgreSQL ~13 (the in-core implementation is
used when compiling with or without OpenSSL in those older versions),
could fail only under this circumstance.
The new cryptohash facilities can fail for reasons other than OOMs, like
attempting MD5 when FIPS is enabled (upstream OpenSSL allows that up to
1.0.2, Fedora and Photon patch OpenSSL 1.1.1 to allow that), so this
would cause incorrect reports to show up.
This commit extends the cryptohash APIs so as callers of those routines
can fetch more context when an error happens, by using a new routine
called pg_cryptohash_error(). The error states are stored within each
implementation's internal context data, so as it is possible to extend
the logic depending on what's suited for an implementation. The default
implementation requires few error states, but OpenSSL could report
various issues depending on its internal state so more is needed in
cryptohash_openssl.c, and the code is shaped so as we are always able to
grab the necessary information.
The core code is changed to adapt to the new error routine, painting
more "const" across the call stack where the static errors are stored,
particularly in authentication code paths on variables that provide
log details. This way, any future changes would warn if attempting to
free these strings. The MD5 authentication code was also a bit blurry
about the handling of "logdetail" (LOG sent to the postmaster), so
improve the comments related that, while on it.
The origin of the problem is 87ae969, that introduced the centralized
cryptohash facility. Extra changes are done for pgcrypto in v14 for the
non-OpenSSL code path to cope with the improvements done by this
commit.
Reported-by: Michael Mühlbeyer
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/89B7F072-5BBE-4C92-903E-D83E865D9367@trivadis.com
Backpatch-through: 14
This check was used to accommodate a staggering variety in particular
in the type of the third argument of accept(). This is no longer of
concern on currently supported systems. We can just use socklen_t in
the code and put in a simple check that substitutes int for socklen_t
if it's missing, to cover the few stragglers.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/3538f4c4-1886-64f2-dcff-aaad8267fb82@enterprisedb.com
The code of SCRAM and SASL have been tightly linked together since SCRAM
exists in the core code, making hard to apprehend the addition of new
SASL mechanisms, but these are by design different facilities, with
SCRAM being an option for SASL. This refactors the code related to both
so as the backend and the frontend use a set of callbacks for SASL
mechanisms, documenting while on it what is expected by anybody adding a
new SASL mechanism.
The separation between both layers is neat, using two sets of callbacks
for the frontend and the backend to mark the frontier between both
facilities. The shape of the callbacks is now directly inspired from
the routines used by SCRAM, so the code change is straight-forward, and
the SASL code is moved into its own set of files. These will likely
change depending on how and if new SASL mechanisms get added in the
future.
Author: Jacob Champion
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/3d2a6f5d50e741117d6baf83eb67ebf1a8a35a11.camel@vmware.com
Our uses of gss_display_status() and gss_display_name() assumed
that the gss_buffer_desc strings returned by those functions are
null-terminated. It appears that they generally are, given the
lack of field complaints up to now. However, the available
documentation does not promise this, and some man pages
for gss_display_status() show examples that rely on the
gss_buffer_desc.length field instead of expecting null
termination. Also, we now have a report that on some
implementations, clang's address sanitizer is of the opinion
that the byte after the specified length is undefined.
Hence, change the code to rely on the length field instead.
This might well be cosmetic rather than fixing any real bug, but
it's hard to be sure, so back-patch to all supported branches.
While here, also back-patch the v12 changes that made pg_GSS_error
deal honestly with multiple messages available from
gss_display_status.
Per report from Sudheer H R.
Discussion: https://postgr.es/m/5372B6D4-8276-42C0-B8FB-BD0918826FC3@tekenlight.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
We had a report of confusing server behavior caused by a client bug
that sent junk to the server: the server thought the junk was a
very long message length and waited patiently for data that would
never come. We can reduce the risk of that by being less trusting
about message lengths.
For a long time, libpq has had a heuristic rule that it wouldn't
believe large message size words, except for a small number of
message types that are expected to be (potentially) long. This
provides some defense against loss of message-boundary sync and
other corrupted-data cases. The server does something similar,
except that up to now it only limited the lengths of messages
received during the connection authentication phase. Let's
do the same as in libpq and put restrictions on the allowed
length of all messages, while distinguishing between message
types that are expected to be long and those that aren't.
I used a limit of 10000 bytes for non-long messages. (libpq's
corresponding limit is 30000 bytes, but given the asymmetry of
the FE/BE protocol, there's no good reason why the numbers should
be the same.) Experimentation suggests that this is at least a
factor of 10, maybe a factor of 100, more than we really need;
but plenty of daylight seems desirable to avoid false positives.
In any case we can adjust the limit based on beta-test results.
For long messages, set a limit of MaxAllocSize - 1, which is the
most that we can absorb into the StringInfo buffer that the message
is collected in. This just serves to make sure that a bogus message
size is reported as such, rather than as a confusing gripe about
not being able to enlarge a string buffer.
While at it, make sure that non-mainline code paths (such as
COPY FROM STDIN) are as paranoid as SocketBackend is, and validate
the message type code before believing the message length.
This provides an additional guard against getting stuck on corrupted
input.
Discussion: https://postgr.es/m/2003757.1619373089@sss.pgh.pa.us
The previous implementation (from 9afffcb833) had an unnecessary check
on the boundaries of the enum which trigtered compile warnings. To clean
it up, move the pre-existing static assert to a central location and
call that.
Reported-By: Erik Rijkers
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/1056399262.13159.1617793249020@webmailclassic.xs4all.nl
The "authenticated identity" is the string used by an authentication
method to identify a particular user. In many common cases, this is the
same as the PostgreSQL username, but for some third-party authentication
methods, the identifier in use may be shortened or otherwise translated
(e.g. through pg_ident user mappings) before the server stores it.
To help administrators see who has actually interacted with the system,
this commit adds the capability to store the original identity when
authentication succeeds within the backend's Port, and generates a log
entry when log_connections is enabled. The log entries generated look
something like this (where a local user named "foouser" is connecting to
the database as the database user called "admin"):
LOG: connection received: host=[local]
LOG: connection authenticated: identity="foouser" method=peer (/data/pg_hba.conf:88)
LOG: connection authorized: user=admin database=postgres application_name=psql
Port->authn_id is set according to the authentication method:
bsd: the PostgreSQL username (aka the local username)
cert: the client's Subject DN
gss: the user principal
ident: the remote username
ldap: the final bind DN
pam: the PostgreSQL username (aka PAM username)
password (and all pw-challenge methods): the PostgreSQL username
peer: the peer's pw_name
radius: the PostgreSQL username (aka the RADIUS username)
sspi: either the down-level (SAM-compatible) logon name, if
compat_realm=1, or the User Principal Name if compat_realm=0
The trust auth method does not set an authenticated identity. Neither
does clientcert=verify-full.
Port->authn_id could be used for other purposes, like a superuser-only
extra column in pg_stat_activity, but this is left as future work.
PostgresNode::connect_{ok,fails}() have been modified to let tests check
the backend log files for required or prohibited patterns, using the
new log_like and log_unlike parameters. This uses a method based on a
truncation of the existing server log file, like issues_sql_like().
Tests are added to the ldap, kerberos, authentication and SSL test
suites.
Author: Jacob Champion
Reviewed-by: Stephen Frost, Magnus Hagander, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/c55788dd1773c521c862e8e0dddb367df51222be.camel@vmware.com
Currently we only recognize the Common Name (CN) of a certificate's
subject to be matched against the user name. Thus certificates with
subjects '/OU=eng/CN=fred' and '/OU=sales/CN=fred' will have the same
connection rights. This patch provides an option to match the whole
Distinguished Name (DN) instead of just the CN. On any hba line using
client certificate identity, there is an option 'clientname' which can
have values of 'DN' or 'CN'. The default is 'CN', the current procedure.
The DN is matched against the RFC2253 formatted DN, which looks like
'CN=fred,OU=eng'.
This facility of probably best used in conjunction with an ident map.
Discussion: https://postgr.es/m/92e70110-9273-d93c-5913-0bccb6562740@dunslane.net
Reviewed-By: Michael Paquier, Daniel Gustafsson, Jacob Champion
