Introduced in 585bca39: msgid is not used in the Windows code path.
Also adjust comments a tad (mostly to keep pgindent from messing it up).
David Rowley
Specifically, on-stack memset() might be removed, so:
* Replace memset() with px_memset()
* Add px_memset to copy_crlf()
* Add px_memset to pgp-s2k.c
Patch by Marko Kreen
Report by PVS-Studio
Backpatch through 8.4.
This has probably been broken for quite a long time. Buildfarm member
currawong's current results suggest that it's been broken since 9.1, so
backpatch this to that branch.
This only supports Python 2 - I will handle Python 3 separately, but
this is a fairly simple fix.
According to the Single Unix Spec and assorted man pages, you're supposed
to use the constants named AF_xxx when setting ai_family for a getaddrinfo
call. In a few places we were using PF_xxx instead. Use of PF_xxx
appears to be an ancient BSD convention that was not adopted by later
standardization. On BSD and most later Unixen, it doesn't matter much
because those constants have equivalent values anyway; but nonetheless
this code is not per spec.
In the same vein, replace PF_INET by AF_INET in one socket() call, which
wasn't even consistent with the other socket() call in the same function
let alone the remainder of our code.
Per investigation of a Cygwin trouble report from Marco Atzeri. It's
probably a long shot that this will fix his issue, but it's wrong in
any case.
Bind attempts to an LDAP server should time out after two seconds,
allowing additional lines in the service control file to be parsed
(which provide a fall back to a secondary LDAP server or default options).
The existing code failed to enforce that timeout during TCP connect,
resulting in a hang far longer than two seconds if the LDAP server
does not respond.
Laurenz Albe
Previously, in some places, socket creation errors were checked for
negative values, which is not true for Windows because sockets are
unsigned. This masked socket creation errors on Windows.
Backpatch through 9.0. 8.4 doesn't have the infrastructure to fix this.
I mixed up BLCKSZ and XLOG_BLCKSZ when I changed the way the buffer is
allocated a couple of weeks ago. With the default settings, they are both
8k, but they can be changed at compile-time.
Don't reset the rightlink of a page when replaying a page update record.
This was a leftover from pre-hot standby days, when it was not possible to
have scans concurrent with WAL replay. Resetting the right-link was not
necessary back then either, but it was done for the sake of tidiness. But
with hot standby, it's wrong, because a concurrent scan might still need it.
Backpatch all versions with hot standby, 9.0 and above.
Formerly, we set up the postmaster's signal handling only when we were
about to start launching subprocesses. This is a bad idea though, as
it means that for example a SIGINT arriving before that will kill the
postmaster instantly, perhaps leaving lockfiles, socket files, shared
memory, etc laying about. We'd rather that such a signal caused orderly
postmaster termination including releasing of those resources. A simple
fix is to move the PostmasterMain stanza that initializes signal handling
to an earlier point, before we've created any such resources. Then, an
early-arriving signal will be blocked until we're ready to deal with it
in the usual way. (The only part that really needs to be moved up is
blocking of signals, but it seems best to keep the signal handler
installation calls together with that; for one thing this ensures the
kernel won't drop any signals we wished to get. The handlers won't get
invoked in any case until we unblock signals in ServerLoop.)
Per a report from MauMau. He proposed changing the way "pg_ctl stop"
works to deal with this, but that'd just be masking one symptom not
fixing the core issue.
It's been like this since forever, so back-patch to all supported branches.
EXEC_BACKEND builds (i.e., Windows) failed to absorb values of PGC_BACKEND
parameters if they'd been changed post-startup via the config file. This
for example prevented log_connections from working if it were turned on
post-startup. The mechanism for handling this case has always been a bit
of a kluge, and it wasn't revisited when we implemented EXEC_BACKEND.
While in a normal forking environment new backends will inherit the
postmaster's value of such settings, EXEC_BACKEND backends have to read
the settings from the CONFIG_EXEC_PARAMS file, and they were mistakenly
rejecting them. So this case has always been broken in the Windows port;
so back-patch to all supported branches.
Amit Kapila
The code segment that removes the old symlink (if present) wasn't clued
into the fact that on Windows, symlinks are junction points which have
to be removed with rmdir().
Backpatch to 9.0, where the failing code was introduced.
MauMau, reviewed by Muhammad Asif Naeem and Amit Kapila
The advice to join to pg_prepared_xacts via the transaction column was not
updated when the transaction column was replaced by virtualtransaction.
Since it's not quite obvious how to do that join, give an explicit example.
For consistency also give an example for the adjacent case of joining to
pg_stat_activity. And link-ify the view references too, just because we
can. Per bug #9840 from Alexey Bashtanov.
Michael Paquier and Tom Lane
It's been 16 bytes, not 12, for ages. This was fixed in passing in HEAD
(commit 146604ec), but as a factual error it should have been back-patched.
Per gripe from Tatsuhito Kasahara.
Memory allocation can fail if you run out of memory, and inside a critical
section that will lead to a PANIC. Use conservatively-sized arrays in stack
instead.
There was previously no explicit limit on the number of pages a GiST split
can produce, it was only limited by the number of LWLocks that can be held
simultaneously (100 at the moment). This patch adds an explicit limit of 75
pages. That should be plenty, a typical split shouldn't produce more than
2-3 page halves.
The bug has been there forever, but only backpatch down to 9.1. The code
was changed significantly in 9.1, and it doesn't seem worth the risk or
trouble to adapt this for 9.0 and 8.4.
The code for matching clients to pg_hba.conf lines that specify host names
(instead of IP address ranges) failed to complain if reverse DNS lookup
failed; instead it silently didn't match, so that you might end up getting
a surprising "no pg_hba.conf entry for ..." error, as seen in bug #9518
from Mike Blackwell. Since we don't want to make this a fatal error in
situations where pg_hba.conf contains a mixture of host names and IP
addresses (clients matching one of the numeric entries should not have to
have rDNS data), remember the lookup failure and mention it as DETAIL if
we get to "no pg_hba.conf entry". Apply the same approach to forward-DNS
lookup failures, too, rather than treating them as immediate hard errors.
Along the way, fix a couple of bugs that prevented us from detecting an
rDNS lookup error reliably, and make sure that we make only one rDNS lookup
attempt; formerly, if the lookup attempt failed, the code would try again
for each host name entry in pg_hba.conf. Since more or less the whole
point of this design is to ensure there's only one lookup attempt not one
per entry, the latter point represents a performance bug that seems
sufficient justification for back-patching.
Also, adjust src/port/getaddrinfo.c so that it plays as well as it can
with this code. Which is not all that well, since it does not have actual
support for rDNS lookup, but at least it should return the expected (and
required by spec) error codes so that the main code correctly perceives the
lack of functionality as a lookup failure. It's unlikely that PG is still
being used in production on any machines that require our getaddrinfo.c,
so I'm not excited about working harder than this.
To keep the code in the various branches similar, this includes
back-patching commits c424d0d105 and
1997f34db4 into 9.2 and earlier.
Back-patch to 9.1 where the facility for hostnames in pg_hba.conf was
introduced.
Initialization of this field was not being done according to the
st_changecount protocol (it has to be done within the changecount increment
range, not outside). And the test to see if the value should be reported
as null was wrong. Noted while perusing uses of Port.remote_hostname.
This was wrong from the introduction of this code (commit 4a25bc145),
so back-patch to 9.1.
Any OS user able to access the socket can connect as the bootstrap
superuser and in turn execute arbitrary code as the OS user running the
test. Protect against that by placing the socket in the temporary data
directory, which has mode 0700 thanks to initdb. Back-patch to 8.4 (all
supported versions). The hazard remains wherever the temporary cluster
accepts TCP connections, notably on Windows.
Attempts to run "make check" from a directory with a long name will now
fail. An alternative not sharing that problem was to place the socket
in a subdirectory of /tmp, but that is only secure if /tmp is sticky.
The PG_REGRESS_SOCK_DIR environment variable is available as a
workaround when testing from long directory paths.
As a convenient side effect, this lets testing proceed smoothly in
builds that override DEFAULT_PGSOCKET_DIR. Popular non-default values
like /var/run/postgresql are often unwritable to the build user.
Security: CVE-2014-0067
We must increment the refcount on "plntup" as soon as we have the
reference, not sometime later. Otherwise, if an error is thrown in
between, the Py_XDECREF(plntup) call in the PG_CATCH block removes a
refcount we didn't add, allowing the object to be freed even though
it's still part of the plpython function's parsetree.
This appears to be the cause of crashes seen on buildfarm member
prairiedog. It's a bit surprising that we've not seen it fail repeatably
before, considering that the regression tests have been exercising the
faulty code path since 2009.
The real-world impact is probably minimal, since it's unlikely anyone would
be provoking the "TD["new"] is not a dictionary" error in production, and
that's the only case that is actually wrong. Still, it's a bug affecting
the regression tests, so patch all supported branches.
In passing, remove dead variable "plstr", and demote "platt" to a local
variable inside the PG_TRY block, since we don't need to clean it up
in the PG_CATCH path.
Clear errno before calling readdir() and handle old MinGW errno bug
while adding full test coverage for readdir/closedir failures.
Backpatch through 8.4.
On clean shutdown, walsender waits for all WAL to be replicated to a standby,
and exits. It determined whether that replication had been completed by
checking whether its sent location had been equal to a standby's flush
location. Unfortunately this condition never becomes true when the standby
such as pg_receivexlog which always returns an invalid flush location is
connecting to walsender, and then walsender waits forever.
This commit changes walsender so that it just checks a standby's write
location if a flush location is invalid.
Back-patch to 9.1 where enough infrastructure for this exists.
"8" was correct back when "disable" was the longest allowed value, but
since "verify-full" was added, it should be "12". Given the lack of
complaints, I wouldn't be surprised if nobody is actually using these
values ... but still, if they're in the API, they should be right.
Noticed while pursuing a different problem. It's been wrong for quite
a long time, so back-patch to all supported branches.
This should eliminate the risk of recursive entry to syslog(3), which
appears to be the cause of the hang reported in bug #9551 from James
Morton.
Arguably, the real problem here is auth.c's willingness to turn on
ImmediateInterruptOK while executing fairly wide swaths of backend code.
We may well need to work at narrowing the code ranges in which the
authentication_timeout interrupt is enabled. For the moment, though,
this is a cheap and reasonably noninvasive fix for a field-reported
failure; the other approach would be complex and not necessarily
bug-free itself.
Back-patch to all supported branches.
Use TransactionIdIsInProgress, then TransactionIdDidCommit, to distinguish
whether a NOTIFY message's originating transaction is in progress,
committed, or aborted. The previous coding could accept a message from a
transaction that was still in-progress according to the PGPROC array;
if the client were fast enough at starting a new transaction, it might fail
to see table rows added/updated by the message-sending transaction. Which
of course would usually be the point of receiving the message. We noted
this type of race condition long ago in tqual.c, but async.c overlooked it.
The race condition probably cannot occur unless there are multiple NOTIFY
senders in action, since an individual backend doesn't send NOTIFY signals
until well after it's done committing. But if two senders commit in close
succession, it's certainly possible that we could see the second sender's
message within the race condition window while responding to the signal
from the first one.
Per bug #9557 from Marko Tiikkaja. This patch is slightly more invasive
than what he proposed, since it removes the now-redundant
TransactionIdDidAbort call.
Back-patch to 9.0, where the current NOTIFY implementation was introduced.
We don't take a full-page image of the GIN metapage; instead, the WAL record
contains all the information required to reconstruct it from scratch. But
to avoid torn page hazards, we must re-initialize it from the WAL record
every time, even if it already has a greater LSN, similar to how normal full
page images are restored.
This was highly unlikely to cause any problems in practice, because the GIN
metapage is small. We rely on an update smaller than a 512 byte disk sector
to be atomic elsewhere, at least in pg_control. But better safe than sorry,
and this would be easy to overlook if more fields are added to the metapage
so that it's no longer small.
Reported by Noah Misch. Backpatch to all supported versions.
A fake relcache entry can "own" a SmgrRelation object, like a regular
relcache entry. But when it was free'd, the owner field in SmgrRelation
was not cleared, so it was left pointing to free'd memory.
Amazingly this apparently hasn't caused crashes in practice, or we would've
heard about it earlier. Andres found this with Valgrind.
Report and fix by Andres Freund, with minor modifications by me. Backpatch
to all supported versions.
In make_ruledef and get_query_def, we have long used AcquireRewriteLocks
to ensure that the querytree we are about to deparse is up-to-date and
the schemas of the underlying relations aren't changing. Howwever, that
function thinks the query is about to be executed, so it acquires locks
that are stronger than necessary for the purpose of deparsing. Thus for
example, if pg_dump asks to deparse a rule that includes "INSERT INTO t",
we'd acquire RowExclusiveLock on t. That results in interference with
concurrent transactions that might for example ask for ShareLock on t.
Since pg_dump is documented as being purely read-only, this is unexpected.
(Worse, it used to actually be read-only; this behavior dates back only
to 8.1, cf commit ba4200246.)
Fix this by adding a parameter to AcquireRewriteLocks to tell it whether
we want the "real" execution locks or only AccessShareLock.
Report, diagnosis, and patch by Dean Rasheed. Back-patch to all supported
branches.
When entering crash recovery followed by archive recovery, and the latest
checkpoint is a shutdown checkpoint, and there are no more WAL records to
replay before transitioning from crash to archive recovery, we would not
immediately allow read-only connections in hot standby mode even if we
could. That's because when starting from a shutdown checkpoint, we set
lastReplayedEndRecPtr incorrectly to the record before the checkpoint
record, instead of the checkpoint record itself. We don't run the redo
routine of the shutdown checkpoint record, but starting recovery from it
goes through the same motions, so it should be considered as replayed.
Reported by Kyotaro HORIGUCHI. All versions with hot standby are affected,
so backpatch to 9.0.
The regex code didn't have any provision for query cancel; which is
unsurprising given its non-Postgres origin, but still problematic since
some operations can take a long time. Introduce a callback function to
check for a pending query cancel or session termination request, and
call it in a couple of strategic spots where we can make the regex code
exit with an error indicator.
If we ever actually split out the regex code as a standalone library,
some additional work will be needed to let the cancel callback function
be specified externally to the library. But that's straightforward
(certainly so by comparison to putting the locale-dependent character
classification logic on a similar arms-length basis), and there seems
no need to do it right now.
A bigger issue is that there may be more places than these two where
we need to check for cancels. We can always add more checks later,
now that the infrastructure is in place.
Since there are known examples of not-terribly-long regexes that can
lock up a backend for a long time, back-patch to all supported branches.
I have hopes of fixing the known performance problems later, but adding
query cancel ability seems like a good idea even if they were all fixed.
If there are lots of uncommitted tuples at the end of the index range,
get_actual_variable_range() ends up fetching each one and doing an MVCC
visibility check on it, until it finally hits a visible tuple. This is
bad enough in isolation, considering that we don't need an exact answer
only an approximate one. But because the tuples are not yet committed,
each visibility check does a TransactionIdIsInProgress() test, which
involves scanning the ProcArray. When multiple sessions do this
concurrently, the ensuing contention results in horrid performance loss.
20X overall throughput loss on not-too-complicated queries is easy to
demonstrate in the back branches (though someone's made it noticeably
less bad in HEAD).
We can dodge the problem fairly effectively by using SnapshotDirty rather
than a normal MVCC snapshot. This will cause the index probe to take
uncommitted tuples as good, so that we incur only one tuple fetch and test
even if there are many such tuples. The extent to which this degrades the
estimate is debatable: it's possible the result is actually a more accurate
prediction than before, if the endmost tuple has become committed by the
time we actually execute the query being planned. In any case, it's not
very likely that it makes the estimate a lot worse.
SnapshotDirty will still reject tuples that are known committed dead, so
we won't give bogus answers if an invalid outlier has been deleted but not
yet vacuumed from the index. (Because btrees know how to mark such tuples
dead in the index, we shouldn't have a big performance problem in the case
that there are many of them at the end of the range.) This consideration
motivates not using SnapshotAny, which was also considered as a fix.
Note: the back branches were using SnapshotNow instead of an MVCC snapshot,
but the problem and solution are the same.
Per performance complaints from Bartlomiej Romanski, Josh Berkus, and
others. Back-patch to 9.0, where the issue was introduced (by commit
40608e7f94).
The SQL standard says that OVERLAPS should have a two-element row
constructor on each side. The original coding of OVERLAPS support in
our grammar attempted to extend that by allowing a single-element row
constructor, which it internally duplicated ... or tried to, anyway.
But that code has certainly not worked since our List infrastructure was
rewritten in 2004, and I'm none too sure it worked before that. As it
stands, it ends up building a List that includes itself, leading to
assorted undesirable behaviors later in the parser.
Even if it worked as intended, it'd be a bit evil because of the
possibility of duplicate evaluation of a volatile function that the user
had written only once. Given the lack of documentation, test cases, or
complaints, let's just get rid of the idea and only support the standard
syntax.
While we're at it, improve the error cursor positioning for the
wrong-number-of-arguments errors, and inline the makeOverlaps() function
since it's only called in one place anyway.
Per bug #9227 from Joshua Yanovski. Initial patch by Joshua Yanovski,
extended a bit by me.
Since the temporary server started by "make check" uses "trust"
authentication, another user on the same machine could connect to it
as database superuser, and then potentially exploit the privileges of
the operating-system user who started the tests. We should change
the testing procedures to prevent this risk; but discussion is required
about the best way to do that, as well as more testing than is practical
for an undisclosed security problem. Besides, the same issue probably
affects some user-written test harnesses. So for the moment, we'll just
warn people against using "make check" when there are untrusted users on
the same machine.
In passing, remove some ancient advice that suggested making the
regression testing subtree world-writable if you'd built as root.
That looks dangerously insecure in modern contexts, and anyway we
should not be encouraging people to build Postgres as root.
Security: CVE-2014-0067
