This commit contains the basic, system-wide, infrastructure for
io_method=worker. It does not yet actually execute IO, this commit just
provides the infrastructure for running IO workers, kept separate for easier
review.
The number of IO workers can be adjusted with a PGC_SIGHUP GUC. Eventually
we'd like to make the number of workers dynamically scale up/down based on the
current "IO load".
To allow the number of IO workers to be increased without a restart, we need
to reserve PGPROC entries for the workers unconditionally. This has been
judged to be worth the cost. If it turns out to be problematic, we can
introduce a PGC_POSTMASTER GUC to control the maximum number.
As io workers might be needed during shutdown, e.g. for AIO during the
shutdown checkpoint, a new PMState phase is added. IO workers are shut down
after the shutdown checkpoint has been performed and walsender/archiver have
shut down, but before the checkpointer itself shuts down. See also
87a6690cc6.
Updates PGSTAT_FILE_FORMAT_ID due to the addition of a new BackendType.
Reviewed-by: Noah Misch <noah@leadboat.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Discussion: https://postgr.es/m/20210223100344.llw5an2aklengrmn@alap3.anarazel.de
Discussion: https://postgr.es/m/stj36ea6yyhoxtqkhpieia2z4krnam7qyetc57rfezgk4zgapf@gcnactj4z56m
Specifically, add a per-node hook that is called after the per-node
information has been displayed but before we display children, and a
per-query hook that is called after existing query-level information
is printed. This assumes that extension-added information should
always go at the end rather than the beginning or the middle, but
that seems like an acceptable limitation for simplicity. It also
assumes that extensions will only want to add information, not remove
or reformat existing details; those also seem like acceptable
restrictions, at least for now.
If multiple EXPLAIN extensions are used, the order in which any
additional details are printed is likely to depend on the order in
which the modules are loaded. That seems OK, since the user may
have opinions about the order in which output should appear, and the
extension author can't really know whether their stuff is more or
less important to a particular user than some other extension.
Discussion: http://postgr.es/m/CA+TgmoYSzg58hPuBmei46o8D3SKX+SZoO4K_aGQGwiRzvRApLg@mail.gmail.com
Reviewed-by: Srinath Reddy <srinath2133@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Since its introduction in fc34b0d9de, the default
maintenance_io_concurrency has been larger than the default
effective_io_concurrency. maintenance_io_concurrency primarily
controlled prefetching done on behalf of the whole system, for
operations like recovery. Therefore it makes sense for it to have a
value equal to or greater than effective_io_concurrency, which controls
I/O concurrency for reading a relation in a bitmap heap scan.
ff79b5b2ab increased effective_io_concurrency to 16, so we'll increase
maintenance_io_concurrency as well. For now, though, we'll keep the
defaults of effective_io_concurrency and maintenance_io_concurrency
equal to one another (16).
On fast, high IOPs systems, significantly higher values of
maintenance_io_concurrency are observably beneficial [1]. However, such
values would flood low IOPs systems and increase overall system I/O
latency.
It is worth mentioning that since 9256822608 and c3e775e608,
maintenance_io_concurrency also controls the I/O concurrency of each
vacuum worker. Since many autovacuum workers may be simultaneously
issuing I/Os, we want to keep maintenance_io_concurrency appropriately
conservative.
[1] https://postgr.es/m/c5d52837-6256-0556-ac8c-d6d3d558820a%40enterprisedb.com
Suggested-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/CAKZiRmxdHQaU%2B2Zpe6d%3Dx%3D0vigJ1sfWwwVYLJAf%3Dud_wQ_VcUw%40mail.gmail.com
Modules can use RegisterExtensionExplainOption to register new
EXPLAIN options, and GetExplainExtensionId, GetExplainExtensionState,
and SetExplainExtensionState to store related state inside the
ExplainState object.
Since this substantially increases the amount of code that needs
to handle ExplainState-related tasks, move a few bits of existing
code to a new file explain_state.c and add the rest of this
infrastructure there.
See the comments at the top of explain_state.c for further
explanation of how this mechanism works.
This does not yet provide a way for such such options to do anything
useful. The intention is that we'll add hooks for that purpose in a
separate commit.
Discussion: http://postgr.es/m/CA+TgmoYSzg58hPuBmei46o8D3SKX+SZoO4K_aGQGwiRzvRApLg@mail.gmail.com
Reviewed-by: Srinath Reddy <srinath2133@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
The main motivations to use AIO in PostgreSQL are:
a) Reduce the time spent waiting for IO by issuing IO sufficiently early.
In a few places we have approximated this using posix_fadvise() based
prefetching, but that is fairly limited (no completion feedback, double the
syscalls, only works with buffered IO, only works on some OSs).
b) Allow to use Direct-I/O (DIO).
DIO can offload most of the work for IO to hardware and thus increase
throughput / decrease CPU utilization, as well as reduce latency. While we
have gained the ability to configure DIO in d4e71df6, it is not yet usable
for real world workloads, as every IO is executed synchronously.
For portability, the new AIO infrastructure allows to implement AIO using
different methods. The choice of the AIO method is controlled by the new
io_method GUC. As of this commit, the only implemented method is "sync",
i.e. AIO is not actually executed asynchronously. The "sync" method exists to
allow to bypass most of the new code initially.
Subsequent commits will introduce additional IO methods, including a
cross-platform method implemented using worker processes and a linux specific
method using io_uring.
To allow different parts of postgres to use AIO, the core AIO infrastructure
does not need to know what kind of files it is operating on. The necessary
behavioral differences for different files are abstracted as "AIO
Targets". One example target would be smgr. For boring portability reasons,
all targets currently need to be added to an array in aio_target.c. This
commit does not implement any AIO targets, just the infrastructure for
them. The smgr target will be added in a later commit.
Completion (and other events) of IOs for one type of file (i.e. one AIO
target) need to be reacted to differently, based on the IO operation and the
callsite. This is made possible by callbacks that can be registered on
IOs. E.g. an smgr read into a local buffer does not need to update the
corresponding BufferDesc (as there is none), but a read into shared buffers
does. This commit does not contain any callbacks, they will be added in
subsequent commits.
For now the AIO infrastructure only understands READV and WRITEV operations,
but it is expected that more operations will be added. E.g. fsync/fdatasync,
flush_range and network operations like send/recv.
As of this commit, nothing uses the AIO infrastructure. Later commits will add
an smgr target, md.c and bufmgr.c callbacks and then finally use AIO for
read_stream.c IO, which, in one fell swoop, will convert all read stream users
to AIO.
The goal is to use AIO in many more places. There are patches to use AIO for
checkpointer and bgwriter that are reasonably close to being ready. There also
are prototypes to use it for WAL, relation extension, backend writes and many
more. Those prototypes were important to ensure the design of the AIO
subsystem is not too limiting (e.g. WAL writes need to happen in critical
sections, which influenced a lot of the design).
A future commit will add an AIO README explaining the AIO architecture and how
to use the AIO subsystem. The README is added later, as it references details
only added in later commits.
Many many more people than the folks named below have contributed with
feedback, work on semi-independent patches etc. E.g. various folks have
contributed patches to use the read stream infrastructure (added by Thomas in
b5a9b18cd0) in more places. Similarly, a *lot* of folks have contributed to
the CI infrastructure, which I had started to work on to make adding AIO
feasible.
Some of the work by contributors has gone into the "v1" prototype of AIO,
which heavily influenced the current design of the AIO subsystem. None of the
code from that directly survives, but without the prototype, the current
version of the AIO infrastructure would not exist.
Similarly, the reviewers below have not necessarily looked at the current
design or the whole infrastructure, but have provided very valuable input. I
am to blame for problems, not they.
Author: Andres Freund <andres@anarazel.de>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Co-authored-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Discussion: https://postgr.es/m/20210223100344.llw5an2aklengrmn@alap3.anarazel.de
Discussion: https://postgr.es/m/stj36ea6yyhoxtqkhpieia2z4krnam7qyetc57rfezgk4zgapf@gcnactj4z56m
This commit just does the minimal wiring up of the AIO subsystem, added in the
next commit, to the rest of the system. The next commit contains more details
about motivation and architecture.
This commit is kept separate to make it easier to review, separating the
changes across the tree, from the implementation of the new subsystem.
We discussed squashing this commit with the main commit before merging AIO,
but there has been a mild preference for keeping it separate.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
This reverts commit b860848232, that was added as a prerequisite for
the support of pgstats data flush across checkpoints, linking a pgstats
file to a specific checkpoint redo LSN.
As reported, this is proving to be currently problematic when going
through a pg_upgrade, that does direct manipulations of the control file
in the new cluster. The LSN stored in the pgstats file is not able to
cope with any changes done in the control file by pg_upgrade yet,
causing the pgstats file to be discarded when starting the new cluster
after overriding its redo LSN (one is a `pg_resetwal -l` where the new
cluster's start LSN is bumped by a hardcoded value of 8 segments, see
copy_xact_xlog_xid).
The least painful path going forward is likely going to be a refactor of
the pgstats code so as it is possible to read and write some of its data
with some routines in src/common/, so as pg_upgrade or pg_resetwal are
able to update its data. The main point is that we are going to need a
LSN in the stats file should we make it written at checkpoint time and
not only as part of a shutdown sequence. It is too late to dive into
these details for v18, so let's revert the change, and let's try to
figure out all the details in the next release cycle. The pgstats file
is currently only written as part of a shutdown sequence, and its
contents are still lost on crash, same as older releases.
Bump PGSTAT_FILE_FORMAT_ID.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2563883.1741826489@sss.pgh.pa.us
To initiate IO on a shared buffer we have StartBufferIO(). For temporary table
buffers no similar function exists - likely because the code for that
currently is very simple due to the lack of concurrency.
However, the upcoming AIO support will make it possible to re-encounter a
local buffer, while the buffer already is the target of IO. In that case we
need to wait for already in-progress IO to complete. This commit makes it
easier to add the necessary code, by introducing StartLocalBufferIO().
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_b9anbWzEs5AAF9WCvcEVmgz-1AkHSQ-CLLy-p7WHzvFw@mail.gmail.com
Previously we had two paths implementing writing out temporary table
buffers. For shared buffers, the logic for that is centralized in
FlushBuffer(). Introduce FlushLocalBuffer() to do the same for local buffers.
Besides being a nice cleanup on its own, it also makes an upcoming change
slightly easier.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_b9anbWzEs5AAF9WCvcEVmgz-1AkHSQ-CLLy-p7WHzvFw@mail.gmail.com
Previously TerminateLocalBufferIO() was open-coded in multiple places, which
doesn't seem like a great idea. While TerminateLocalBufferIO() currently is
rather simple, an upcoming patch requires additional code to be added to
TerminateLocalBufferIO(), making this modification particularly worthwhile.
For some reason FlushRelationBuffers() previously cleared BM_JUST_DIRTIED,
even though that's never set for temporary buffers. This is not carried over
as part of this change.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_b9anbWzEs5AAF9WCvcEVmgz-1AkHSQ-CLLy-p7WHzvFw@mail.gmail.com
Improve performance and reduce table sizes for case mapping.
The main case mapping table stores only 16-bit offsets, which can be
used to look up the mapped code point in any of the case tables (fold,
lower, upper, or title case). Simple case pairs point to the same
offsets.
Generate a function in generate-unicode_case_table.pl that consists of
a nested branches to test for specific codepoint ranges that determine
the offset in the main table.
Other approaches were considered, such as representing these ranges as
another structure (rather than branches in a generated function), or a
different approach such as a radix tree, or perfect hashing. The
author implemented and tested these alternatives and settled on the
generated branches.
Author: Alexander Borisov <lex.borisov@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/7cac7e66-9a3b-4e3f-a997-42aa0c401f80%40gmail.com
After pushing the bitmap iterator into table-AM specific code (as part
of making bitmap heap scan use the read stream API in 2b73a8cd33),
scan_bitmap_next_block() no longer returns the current block number.
Since scan_bitmap_next_block() isn't returning any relevant information
to bitmap table scan code, it makes more sense to get rid of it.
Now, bitmap table scan code only calls table_scan_bitmap_next_tuple(),
and the heap AM implementation of scan_bitmap_next_block() is a local
helper in heapam_handler.c.
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/flat/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
Make Bitmap Heap Scan use the read stream API instead of invoking
ReadBuffer() for each block indicated by the bitmap.
The read stream API handles prefetching, so remove all of the explicit
prefetching from bitmap heap scan code.
Now, heap table AM implements a read stream callback which uses the
bitmap iterator to return the next required block to the read stream
code.
Tomas Vondra conducted extensive regression testing of this feature.
Andres Freund, Thomas Munro, and I analyzed regressions and Thomas Munro
patched the read stream API.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Tested-by: Tomas Vondra <tomas@vondra.me>
Tested-by: Andres Freund <andres@anarazel.de>
Tested-by: Thomas Munro <thomas.munro@gmail.com>
Tested-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
Remove the TBMIterateResult member from the TBMPrivateIterator and
TBMSharedIterator and make tbm_[shared|private_]iterate() take a
TBMIterateResult as a parameter.
This allows tidbitmap API users to manage multiple TBMIterateResults per
scan. This is required for bitmap heap scan to use the read stream API,
with which there may be multiple I/Os in flight at once, each one with a
TBMIterateResult.
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/d4bb26c9-fe07-439e-ac53-c0e244387e01%40vondra.me
This commit introduces a new GUC, log_lock_failure, which controls whether
a detailed log message is produced when a lock acquisition fails. Currently,
it only supports logging lock failures caused by SELECT ... NOWAIT.
The log message includes information about all processes holding or
waiting for the lock that couldn't be acquired, helping users analyze and
diagnose the causes of lock failures.
Currently, this option does not log failures from SELECT ... SKIP LOCKED,
as that could generate excessive log messages if many locks are skipped,
causing unnecessary noise.
This mechanism can be extended in the future to support for logging
lock failures from other commands, such as LOCK TABLE ... NOWAIT.
Author: Yuki Seino <seinoyu@oss.nttdata.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/411280a186cc26ef7034e0f2dfe54131@oss.nttdata.com
PrepareSortSupportFromIndexRel() was accepting btree strategy numbers
purely for the purpose of comparing it later against btree strategies
to determine if the sort direction was forward or reverse. Change
that. Instead, pass a bool directly, to indicate the same without an
unfortunate assumption that a strategy number refers specifically to a
btree strategy. (This is similar in spirit to commits 0d2aa4d493 and
c594f1ad2ba.)
(This could arguably be simplfied further by having the callers fill
in ssup_reverse directly. But this way, it preserves consistency by
having all PrepareSortSupport*() variants be responsible for filling
in ssup_reverse.)
Moreover, remove the hardcoded check against BTREE_AM_OID, and check
against amcanorder instead, which is the actual requirement.
Co-authored-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
When pg_nodiscard was first added, the C standard draft had it as a
function specifier, and so the code comment about placement was
written with that in mind. The final C23 standard has it as an
attribute and the placement rules are a bit different for that.
Specifically, it needs to be before extern or static. (Or at least
both current clang and gcc require that.) So just swap these. (To be
clear: The current implementation with gcc attributes doesn't care.
This change is just for maximum forward compatibility for non-gcc
compilers.) This also keeps the order consistent with the previously
introduced pg_noreturn. Also update the code comment to reflect the
mentioned developments since its introduction.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
Previously the support functions assumed that the caller needed one pin
to make progress, and could optionally use some more, allowing enough
for every connection to do the same. Add a couple more functions for
callers that want to know:
* what the maximum possible number could be, irrespective of currently
held pins, for space planning purposes
* how many additional pins they could acquire right now, without the
special case allowing one pin, for callers that already hold pins and
could already make progress even if no extra pins are available
The pin limit logic began in commit 31966b15. This refactoring is
better suited to read_stream.c, which will be adjusted to respect the
remaining limit as it changes over time in a follow-up commit. It also
computes MaxProportionalPins up front, to avoid performing divisions
whenever a caller needs to check the balance.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA%2BhUKGK_%3D4CVmMHvsHjOVrK6t4F%3DLBpFzsrr3R%2BaJYN8kcTfWg%40mail.gmail.com
We want to support a "noreturn" decoration on more compilers besides
just GCC-compatible ones, but for that we need to move the decoration
in front of the function declaration instead of either behind it or
wherever, which is the current style afforded by GCC-style attributes.
Also rename the macro to "pg_noreturn" to be similar to the C11
standard "noreturn".
pg_noreturn is now supported on all compilers that support C11 (using
_Noreturn), as well as GCC-compatible ones (using __attribute__, as
before), as well as MSVC (using __declspec). (When PostgreSQL
requires C11, the latter two variants can be dropped.)
Now, all supported compilers effectively support pg_noreturn, so the
extra code for !HAVE_PG_ATTRIBUTE_NORETURN can be dropped.
This also fixes a possible problem if third-party code includes
stdnoreturn.h, because then the current definition of
#define pg_attribute_noreturn() __attribute__((noreturn))
would cause an error.
Note that the C standard does not support a noreturn attribute on
function pointer types. So we have to drop these here. There are
only two instances at this time, so it's not a big loss. In one case,
we can make up for it by adding the pg_noreturn to a wrapper function
and adding a pg_unreachable(), in the other case, the latter was
already done before.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
On Publication rename, we need to only invalidate the RelationSyncCache
entries corresponding to relations that are part of the publication being
renamed.
As part of this patch, we introduce a new invalidation message to
invalidate the cache maintained by the logical decoding output plugin. We
can't use existing relcache invalidation for this purpose, as that would
unnecessarily cause relcache invalidations in other backends.
This will improve performance by building fewer relation cache entries
during logical replication.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966C09AA201EFFA706576A7F5C92@OSCPR01MB14966.jpnprd01.prod.outlook.com
This commit enhances pg_rewind's --write-recovery-conf option to
include the dbname in the generated primary_conninfo value when
specified in the --source-server option. With this modification, the
rewound server can connect to the primary server without manual
configuration file modifications when sync_replication_slots is
enabled.
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAkW=Ht0k9dVoBTCcqLiiZ2MXhVr+d=j2T_EZMerGrLWQ@mail.gmail.com
There used to be bespoken pools for these structs to reduce the
palloc/pfree overhead, but that was ripped out a long time ago and
replaced with the generic, cheaper generational memory allocator
(commit a4ccc1cef5). The Get/Return terminology made sense with the
pools, as you "got" an object from the pool and "returned" it later,
but now it just looks weird. Rename to Alloc/Free.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/c9e43d2d-8e83-444f-b111-430377368989@iki.fi
Add log_connections option 'setup_durations' which logs durations of
several key parts of connection establishment and backend setup.
For an incoming connection, starting from when the postmaster gets a
socket from accept() and ending when the forked child backend is first
ready for query, there are multiple steps that could each take longer
than expected due to external factors. This logging provides visibility
into authentication and fork duration as well as the end-to-end
connection establishment and backend initialization time.
To make this portable, the timings captured in the postmaster (socket
creation time, fork initiation time) are passed through the
BackendStartupData.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Guillaume Lelarge <guillaume.lelarge@dalibo.com>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
Convert the boolean log_connections GUC into a list GUC comprised of the
connection aspects to log.
This gives users more control over the volume and kind of connection
logging.
The current log_connections options are 'receipt', 'authentication', and
'authorization'. The empty string disables all connection logging. 'all'
enables all available connection logging.
For backwards compatibility, the most common values for the
log_connections boolean are still supported (on, off, 1, 0, true, false,
yes, no). Note that previously supported substrings of on, off, true,
false, yes, and no are no longer supported.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
Previously, pg_logicalinspect functions were too trusting of their
input and blindly passed it to SnapBuildRestoreSnapshot(). If the
input pointed to a directory, the server could a PANIC error while
attempting to fsync_fname() with isdir=false on a directory.
This commit adds validation checks for input filenames and passes the
LSN extracted from the filename to SnapBuildRestoreSnapshot() instead
of the filename itself. It also adds regression tests for various
input patterns and permission checks.
Bug: #18828
Reported-by: Robins Tharakan <tharakan@gmail.com>
Co-authored-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/18828-0f4701c635064211@postgresql.org
Up to now we just punted on showing the window definitions used
in a plan, with window function calls represented as "OVER (?)".
To improve that, show the window definition implemented by each
WindowAgg plan node, and reference their window names in OVER.
For nameless window clauses generated by "OVER (...)", assign
unique names w1, w2, etc.
In passing, re-order the properties shown for a WindowAgg node
so that the Run Condition (if any) appears after the Window
property and before the Filter (if any). This seems more
sensible since the Run Condition is associated with the Window
and acts before the Filter.
Thanks to David G. Johnston and Álvaro Herrera for design
suggestions.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/144530.1741469955@sss.pgh.pa.us
Make nbtree's "1/3 of a page limit" BTMaxItemSize function-like macro
(which accepts a "page" argument) into an object-like macro that can be
used from code that doesn't have convenient access to an nbtree page.
Preparation for an upcoming patch that adds skip scan to nbtree.
Parallel index scans that use skip scan will serialize datums (not just
SAOP array subscripts) when scheduling primitive scans. BTMaxItemSize
will be used by btestimateparallelscan to determine how much DSM to
request.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=H_RG5weNGeUG_TkK87tRBnH9mGCQj6WpM4V4FNWKv2g@mail.gmail.com
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan/index-only scan/bitmap index scan nodes. This
information is particularly useful with scans that use ScalarArrayOp
quals, where the number of index searches can be unpredictable due to
implementation details that interact with physical index characteristics
(at least with nbtree SAOP scans, since Postgres 17 commit 5bf748b8).
The information shown also provides useful context when EXPLAIN ANALYZE
runs a plan with an index scan node that successfully applied the skip
scan optimization (set to be added to nbtree by an upcoming patch).
The instrumentation works by teaching all index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs already increment
the pg_stat_*_indexes.idx_scan counter (we're counting the same event,
but at the scan level rather than the relation level). Parallel queries
have workers copy their local counter struct into shared memory when an
index scan node ends -- even when it isn't a parallel aware scan node.
An earlier version of this patch that only worked with parallel aware
scans became commit 5ead85fb (though that was quickly reverted by commit
d00107cd following "debug_parallel_query=regress" buildfarm failures).
Our approach doesn't match the approach used when tracking other index
scan related costs (e.g., "Rows Removed by Filter:"). It is comparable
to the approach used in similar cases involving costs that are only
readily accessible inside an access method, not from the executor proper
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan, which was recently
enhanced to show per-worker costs by commit 5a1e6df3, using essentially
the same scheme as the one used here). It is necessary for index AMs to
have direct responsibility for maintaining the new counter, since the
counter might need to be incremented multiple times per amgettuple call
(or per amgetbitmap call). But it is also necessary for the executor
proper to manage the shared memory now used to transfer each worker's
counter struct to the leader.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
This commit adds per-backend WAL statistics, providing the same
information as pg_stat_wal, except that it is now possible to know how
much WAL activity is happening in each backend rather than an overall
aggregate of all the activity. Like pg_stat_wal, the implementation
relies on pgWalUsage, tracking the difference of activity between two
reports to pgstats.
This data can be retrieved with a new system function called
pg_stat_get_backend_wal(), that returns one tuple based on the PID
provided in input. Like pg_stat_get_backend_io(), this is useful when
joined with pg_stat_activity to get a live picture of the WAL generated
for each running backend, showing how the activity is [un]balanced.
pgstat_flush_backend() gains a new flag value, able to control the flush
of the WAL stats.
This commit relies mostly on the infrastructure provided by
9aea73fc61, that has introduced backend statistics.
Bump catalog version. A bump of PGSTAT_FILE_FORMAT_ID is not required,
as backend stats do not persist on disk.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/Z3zqc4o09dM/Ezyz@ip-10-97-1-34.eu-west-3.compute.internal
Recognizing the real-life complexity where columns in the table often have
functional dependencies, PostgreSQL's estimation of the number of distinct
values over a set of columns can be underestimated (or much rarely,
overestimated) when dealing with multi-clause JOIN. In the case of hash
join, it can end up with a small number of predicted hash buckets and, as
a result, picking non-optimal merge join.
To improve the situation, we introduce one additional stage of bucket size
estimation - having two or more join clauses estimator lookup for extended
statistics and use it for multicolumn estimation. Clauses are grouped into
lists, each containing expressions referencing the same relation. The result
of the multicolumn estimation made over such a list is combined with others
according to the caller's logic. Clauses that are not estimated are returned
to the caller for further estimation.
Discussion: https://postgr.es/m/52257607-57f6-850d-399a-ec33a654457b%40postgrespro.ru
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Andy Fan <zhihui.fan1213@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Teach parallel nbtree index scans to use an LWLock (not a spinlock) to
protect the scan's shared descriptor state.
Preparation for an upcoming patch that will add skip scan optimizations
to nbtree. That patch will create the need to occasionally allocate
memory while the scan descriptor is locked, while copying datums that
were serialized by another backend.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
Clang with -Wtypedef-redefinition produced warnings:
src/include/storage/latch.h:122:3: error: redefinition of typedef 'Latch' is a C11 feature [-Werror,-Wtypedef-redefinition]
Per buildfarm
This reverts commit 5ead85fbc8.
This commit shows test failures with debug_parallel_query=regress. The
underlying issue needs to be debugged, so revert for now.
An additional paramater ("strip_in_arrays") is added to these functions.
It defaults to false. If true, then null array elements are removed as
well as null valued object fields. JSON that just consists of a single
null is not affected.
Author: Florents Tselai <florents.tselai@gmail.com>
Discussion: https://postgr.es/m/4BCECCD5-4F40-4313-9E98-9E16BEB0B01D@gmail.com
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan nodes. This information is particularly useful
with scans that use ScalarArrayOp quals, where the number of index scans
isn't predictable in advance (at least not with optimizations like the
one added to nbtree by Postgres 17 commit 5bf748b8). It will also be
useful when EXPLAIN ANALYZE shows details of an nbtree index scan that
uses skip scan optimizations set to be introduced by an upcoming patch.
The instrumentation works by teaching index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs must already
increment the index's pg_stat_*_indexes.idx_scan counter (we're counting
the same event, but at the scan level rather than the relation level).
The new counter is stored in the scan descriptor (IndexScanDescData),
which explain.c reaches by going through the scan node's PlanState.
This approach doesn't match the approach used when tracking other index
scan specific costs (e.g., "Rows Removed by Filter:"). It is similar to
the approach used in other cases where we must track costs that are only
readily accessible inside an access method, and not from the executor
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan). It is inherently
necessary to maintain a counter that can be incremented multiple times
during a single amgettuple call (or amgetbitmap call), and directly
exposing PlanState.instrument to index access methods seems unappealing.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
