Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
With the old logic, when the reciever had not yet attached, we would
never call shm_mq_inc_bytes_written(), even if force_flush = true
was specified. That could result in a situation where data that the
sender believes it has sent is never received.
Along the way, remove a useless function prototype for a nonexistent
function from shm_mq.h.
Commit 46846433a0 introduced these
problems.
Pavan Deolasee, with a few changes by me.
Discussion: https://postgr.es/m/CABOikdPkwtLLCTnzzmpSMXo3QZa2yXq0J7Q61ssdLFAJYrOVvQ@mail.gmail.com
Do not update shm_mq's mq_bytes_written until we have written
an amount of data greater than 1/4th of the ring size, unless
the caller of shm_mq_send(v) requests a flush at the end of
the message. This reduces the number of calls to SetLatch(),
and also the number of CPU cache misses, considerably, and thus
makes shm_mq significantly faster.
Dilip Kumar, reviewed by Zhihong Yu and Tomas Vondra. Some
minor cosmetic changes by me.
Discussion: http://postgr.es/m/CAFiTN-tVXqn_OG7tHNeSkBbN+iiCZTiQ83uakax43y1sQb2OBA@mail.gmail.com
The logic around shm_mq_detach was a few bricks shy of a load, because
(contrary to the comments for shm_mq_attach) all it did was update the
shared shm_mq state. That left us leaking a bit of process-local
memory, but much worse, the on_dsm_detach callback for shm_mq_detach
was still armed. That means that whenever we ultimately detach from
the DSM segment, we'd run shm_mq_detach again for already-detached,
possibly long-dead queues. This accidentally fails to fail today,
because we only ever re-use a shm_mq's memory for another shm_mq, and
multiple detach attempts on the last such shm_mq are fairly harmless.
But it's gonna bite us someday, so let's clean it up.
To do that, change shm_mq_detach's API so it takes a shm_mq_handle
not the underlying shm_mq. This makes the callers simpler in most
cases anyway. Also fix a few places in parallel.c that were just
pfree'ing the handle structs rather than doing proper cleanup.
Back-patch to v10 because of the risk that the revenant shm_mq_detach
callbacks would cause a live bug sometime. Since this is an API
change, it's too late to do it in 9.6. (We could make a variant
patch that preserves API, but I'm not excited enough to do that.)
Discussion: https://postgr.es/m/8670.1504192177@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The shm_mq mechanism was built to send error (and notice) messages and
tuples between backends. However, shm_mq itself only deals in raw
bytes. Since commit 2bd9e412f9, we have
had infrastructure for one message to redirect protocol messages to a
queue and for another backend to parse them and do useful things with
them. This commit introduces a somewhat analogous facility for tuples
by adding a new type of DestReceiver, DestTupleQueue, which writes
each tuple generated by a query into a shm_mq, and a new
TupleQueueFunnel facility which reads raw tuples out of the queue and
reconstructs the HeapTuple format expected by the executor.
The TupleQueueFunnel abstraction supports reading from multiple tuple
streams at the same time, but only in round-robin fashion. Someone
could imaginably want other policies, but this should be good enough
to meet our short-term needs related to parallel query, and we can
always extend it later.
This also makes one minor addition to the shm_mq API that didn'
seem worth breaking out as a separate patch.
Extracted from Amit Kapila's parallel sequential scan patch. This
code was originally written by me, and then it was revised by Amit,
and then it was revised some more by me.
shm_mq_sendv sends a message to the queue assembled from multiple
locations. This is expected to be used by forthcoming patches to
allow frontend/backend protocol messages to be sent via shm_mq, but
might be useful for other purposes as well.
shm_mq_set_handle associates a BackgroundWorkerHandle with an
already-existing shm_mq_handle. This solves a timing problem when
creating a shm_mq to communicate with a newly-launched background
worker: if you attach to the queue first, and the background worker
fails to start, you might block forever trying to do I/O on the queue;
but if you start the background worker first, but then die before
attaching to the queue, the background worrker might block forever
trying to do I/O on the queue. This lets you attach before starting
the worker (so that the worker is protected) and then associate the
BackgroundWorkerHandle later (so that you are also protected).
Patch by me, reviewed by Stephen Frost.
Revise the original decision to expose a uint64-based interface and
use Size everywhere possible. Avoid assuming that MAXIMUM_ALIGNOF is
8, or making any assumption about the relationship between that value
and sizeof(Size). If MAXIMUM_ALIGNOF is bigger, we'll now insert
padding after the length word; if it's smaller, we are now prepared
to read and write the length word in chunks.
Per discussion with Tom Lane.
This code provides infrastructure for user backends to communicate
relatively easily with background workers. The message queue is
structured as a ring buffer and allows messages of arbitary length
to be sent and received.
Patch by me. Review by KaiGai Kohei and Andres Freund.
