Infrequently, the mismatch caused log_checkpoints messages and
TRACE_POSTGRESQL_CHECKPOINT_DONE() to witness an "added" count too high
by one. Since that consequence is so minor, no back-patch.
This commit has been applied as of 85656bc305 in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
Cold paths, initdb and end-of-recovery, used it. Don't optimize them.
This commit has been applied as of c53c6b98d3 in v15 and newer
versions. This is required on stable branches of v13 and v14 to fix a
regression reported by Noah Misch, introduced by 1f95181b44, causing
spurious failures in archive recovery (neither streaming nor archive
recovery) with concurrent restartpoints. The backpatched versions of
the patches have been aligned on these branches by me, Noah Misch is the
author. Tests have been conducted by the both of us.
Reported-by: Arun Thirupathi
Author: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
makeDependencyGraphWalker thought that only SelectStmt nodes could
contain a WithClause. Which was true in our original implementation
of WITH, but astonishingly we missed updating this code when we added
the ability to attach WITH to INSERT/UPDATE/DELETE (and later MERGE).
Moreover, since it was coded to deliberately block recursion to a
WithClause, even updating raw_expression_tree_walker didn't save it.
The upshot of this was that we didn't see references to outer CTE
names appearing within an inner WITH, and would neither complain about
disallowed recursion nor account for such references when sorting CTEs
into a usable order. The lack of complaints about this is perhaps not
so surprising, because typical usage of WITH wouldn't hit either case.
Still, it's pretty broken; failing to detect recursion here leads to
assert failures or worse later on.
Fix by factoring out the processing of sub-WITHs into a new function
WalkInnerWith, and invoking that for all the statement types that
can have WITH.
Bug: #18878
Reported-by: Yu Liang <luy70@psu.edu>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18878-a26fa5ab6be2f2cf@postgresql.org
Backpatch-through: 13
Commit 28d3c2ddcf introduced an assertion that if the memorized
downlink location in the insertion stack isn't valid, the parent's
LSN should've changed too. Turns out that was too strict. In
gistFindCorrectParent(), if we walk right, we update the parent's
block number and clear its memorized 'downlinkoffnum'. That triggered
the assertion on next call to gistFindCorrectParent(), if the parent
needed to be split too. Relax the assertion, so that it's OK if
downlinkOffnum is InvalidOffsetNumber.
Backpatch to v13-, all supported versions. The assertion was added in
commit 28d3c2ddcf in v12.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://www.postgresql.org/message-id/18396-03cac9beb2f7aac3@postgresql.org
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these.
The original commit d3c5f37dd5 did not
back-patch. Back-patch now to v16-v13, bringing coverage to all supported
versions. This back-patch omits the orignal's refactoring in postgres_fdw.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
compareentry() is declared to work on WordEntryIN structs, but
tsvectorrecv() is using it in two places to work on WordEntry
structs. This is almost okay, since WordEntry is the first
field of WordEntryIN. But on machines with 8-byte pointers,
WordEntryIN will have a larger alignment spec than WordEntry,
and it's at least theoretically possible that the compiler
could generate code that depends on the larger alignment.
Given the lack of field reports, this may be just a hypothetical bug
that upsets nothing except sanitizer tools. Or it may be real on
certain hardware but nobody's tried to use tsvectorrecv() on such
hardware. In any case we should fix it, and the fix is trivial:
just change compareentry() so that it works on WordEntry without any
mention of WordEntryIN. We can also get rid of the quite-useless
intermediate function WordEntryCMP.
Bug: #18875
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18875-07a29c49c825a608@postgresql.org
Backpatch-through: 13
The optimization does not take the removal of TIDs by a concurrent vacuum into
account. The concurrent vacuum can remove dead TIDs and make pages ALL_VISIBLE
while those dead TIDs are referenced in the bitmap. This can lead to a
skip_fetch scan returning too many tuples.
It likely would be possible to implement this optimization safely, but we
don't have the necessary infrastructure in place. Nor is it clear that it's
worth building that infrastructure, given how limited the skip_fetch
optimization is.
In the backbranches we just disable the optimization by always passing
need_tuples=true to table_beginscan_bm(). We can't perform API/ABI changes in
the backbranches and we want to make the change as minimal as possible.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reported-By: Konstantin Knizhnik <knizhnik@garret.ru>
Discussion: https://postgr.es/m/CAEze2Wg3gXXZTr6_rwC+s4-o2ZVFB5F985uUSgJTsECx6AmGcQ@mail.gmail.com
Backpatch-through: 13
Without this, an additional change to the same pg_attribute row
within the same command will fail. This is possible at least with
ALTER TABLE ADD COLUMN on a multiple-inheritance-pathway structure.
(Another potential hazard is that immediately-following operations
might not see the missingval.)
Introduced by 95f650674, which split the former coding that
used a single pg_attribute update to change both atthasdef and
atthasmissing/attmissingval into two updates, but missed that
this should entail two CommandCounterIncrements as well. Like
that fix, back-patch through v13.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/025a3ffa-5eff-4a88-97fb-8f583b015965@gmail.com
Backpatch-through: 13
The implementation of FSM for indexes is simpler than heap, where 0 is
used to track if a page is in-use and (BLCKSZ - 1) if a page is free.
One comment in indexfsm.c and one description in the documentation of
pg_freespacemap were incorrect about that.
Author: Alex Friedman <alexf01@gmail.com>
Discussion: https://postgr.es/m/71eef655-c192-453f-ac45-2772fec2cb04@gmail.com
Backpatch-through: 13
If the given input_type yields valid results from both
get_element_type and get_array_type, initArrayResultAny believed the
former and treated the input as an array type. However this is
inconsistent with what get_promoted_array_type does, leading to
situations where the output of an ARRAY() subquery is labeled with
the wrong type: it's labeled as oidvector[] but is really a 2-D
array of OID. That at least results in strange output, and can
result in crashes if further processing such as unnest() is applied.
AFAIK this is only possible with the int2vector and oidvector
types, which are special-cased to be treated mostly as true arrays
even though they aren't quite.
Fix by switching the logic to match get_promoted_array_type by
testing get_array_type not get_element_type, and remove an Assert
thereby made pointless. (We need not introduce a symmetrical
check for get_element_type in the other if-branch, because
initArrayResultArr will check it.) This restores the behavior
that existed before bac27394a introduced initArrayResultAny:
the output really is int2vector[] or oidvector[].
Comparable confusion exists when an input of an ARRAY[] construct
is int2vector or oidvector: transformArrayExpr decides it's dealing
with a multidimensional array constructor, and we end up with
something that's a multidimensional OID array but is alleged to be
of type oidvector. I have not found a crashing case here, but it's
easy to demonstrate totally-wrong results. Adjust that code so
that what you get is an oidvector[] instead, for consistency with
ARRAY() subqueries. (This change also makes these types work like
domains-over-arrays in this context, which seems correct.)
Bug: #18840
Reported-by: yang lei <ylshiyu@126.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18840-fbc9505f066e50d6@postgresql.org
Backpatch-through: 13
Letting the rewriter keep RangeTblEntry.relid when expanding a view
RTE, without making the outfuncs/readfuncs changes that went along
with that originally, is more problematic than I realized. It causes
WRITE_READ_PARSE_PLAN_TREES testing to fail because outfuncs/readfuncs
don't think relid need be saved in an RTE_SUBQUERY RTE.
There doesn't seem to be any other good route to fixing the whole-row
Var problem solved at f4e7756ef, so we just have to deal with the
consequences. We can make the eventually-produced plan tree safe
for WRITE_READ_PARSE_PLAN_TREES by clearing the relid field at the
end of planning, as was already being done for the functions field.
(The functions field is not problematic here because our abuse of it
is strictly local to the planner.) However, there is no nice fix for
the post-rewrite WRITE_READ_PARSE_PLAN_TREES test.
The solution adopted here is to remove the post-rewrite test in the
affected branches. That's surely less than ideal, but a couple of
arguments can be made why it's not unacceptable. First, the behavior
of outfuncs/readfuncs for parsetrees in these branches is frozen no
matter what, because of catalog stability requirements. So we're not
testing anything that is going to change. Second, testing
WRITE_READ_PARSE_PLAN_TREES at this particular time doesn't correspond
to any direct system functionality requirement, neither rule storage
nor plan transmission.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13-15
makeWholeRowVar() has different rules for constructing a
whole-row Var depending on the kind of RTE it's representing.
This turns out to be problematic because the rewriter and planner
can convert view RTEs and set-returning-function RTEs into
subquery RTEs; so a whole-row Var made during planning might
look different from one made by the parser. In isolation this
doesn't cause any problem, but if a query contains Vars made
both ways for the same varno, there are cross-checks in the
executor that will complain. This manifests for UPDATE, DELETE,
and MERGE queries that use whole-row table references.
To fix, we need makeWholeRowVar() to produce the same result
from an inlined RTE as it would have for the original. For
an inlined view, we can use RangeTblEntry.relid to detect
that this had been a view RTE. For inlined SRFs, make a
data structure definition change akin to commit 47bb9db75,
and say that we won't clear RangeTblEntry.functions until
the end of planning. That allows makeWholeRowVar() to
repeat what it would have done with the unmodified RTE.
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Reported-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Diagnosed-by: Tender Wang <tndrwang@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13
When the rewriter converts an RTE_RELATION RTE for a view into
an RTE_SUBQUERY RTE containing the view's defining query, leave
the relid field alone instead of zeroing it. This allows the
planner to tell that the subquery came from a view rather than
having been written in-line, which is needed to support an
upcoming planner bug fix. We cannot change the behavior of the
outfuncs/readfuncs code in released branches, so the relid field
will not survive in plans passed to parallel workers; therefore
this info should not be relied on in the executor.
This back-patches a portion of the data structure definitional
changes made in v16 and up by commit 47bb9db75. It's being
committed separately for visibility in the commit log, but
with luck it will not actually matter to anyone. While it's
not inconceivable that this change will break code expecting
relid to be zero in a subquery RTE, we can hope that such code
has already been adjusted to cope with v16 and up.
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Diagnosed-by: Tender Wang <tndrwang@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13-15
With improperly defined operator classes, it's possible to get a
Postgres crash because we'd try to invoke a procedure that doesn't
exist. This is because the code is being a bit too trusting that the
opclass is correctly defined. Add some ereport(ERROR)s for cases where
mandatory support procedures are not defined, transforming the crashes
into errors.
The particular case that was reported is an incomplete opclass in
PostGIS.
Backpatch all the way down to 13.
Reported-by: Tobias Wendorff <tobias.wendorff@tu-dortmund.de>
Diagnosed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/fb6d9a35-6c8e-4869-af80-0a4944a793a4@tu-dortmund.de
The function calls GetLatestSnapshot() to acquire a fresh snapshot,
makes it active, and was meant to pass it to table_tuple_lock(), but
instead called GetLatestSnapshot() again to acquire yet another
snapshot. It was harmless because the heap AM and all other known
table AMs ignore the 'snapshot' argument anyway, but let's be tidy.
In the long run, this perhaps should be redesigned so that snapshot
was not needed in the first place. The table AM API uses TID +
snapshot as the unique identifier for the row version, which is
questionable when the row came from an index scan with a Dirty
snapshot. You might lock a different row version when you use a
different snapshot in the table_tuple_lock() call (a fresh MVCC
snapshot) than in the index scan (DirtySnapshot). However, in the heap
AM and other AMs where the TID alone identifies the row version, it
doesn't matter. So for now, just fix the obvious albeit harmless bug.
This has been wrong ever since the table AM API was introduced in
commit 5db6df0c01, so backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/83d243d6-ad8d-4307-8b51-2ee5844f6230@iki.fi
Backpatch-through: 13
Per POSIX, a caller of strtol() that wishes to check for errors must
set errno to 0 beforehand. Several places in spell.c neglected that,
so that they risked delivering a false overflow error in case errno
had been ERANGE already. Given the lack of field reports, this case
may be unreachable at present --- but it's surely trouble waiting to
happen, so fix it.
Author: Jacob Brazeal <jacob.brazeal@gmail.com>
Discussion: https://postgr.es/m/CA+COZaBhsq6EromFm+knMJfzK6nTpG23zJ+K2=nfUQQXcj_xcQ@mail.gmail.com
Backpatch-through: 13
If a GIN index search had a lot of search keys (for example,
"jsonbcol ?| array[]" with tens of thousands of array elements),
both ginFillScanKey() and startScanKey() took O(N^2) time.
Worse, those loops were uncancelable for lack of CHECK_FOR_INTERRUPTS.
The problem in ginFillScanKey() is the brute-force search key
de-duplication done in ginFillScanEntry(). The most expedient
solution seems to be to just stop trying to de-duplicate once
there are "too many" search keys. We could imagine working harder,
say by using a sort-and-unique algorithm instead of brute force
compare-all-the-keys. But it seems unlikely to be worth the trouble.
There is no correctness issue here, since the code already allowed
duplicate keys if any extra_data is present.
The problem in startScanKey() is the loop that attempts to identify
the first non-required search key. In the submitted test case, that
vainly tests all the key positions, and each iteration takes O(N)
time. One part of that is that it's reinitializing the entryRes[]
array from scratch each time, which is entirely unnecessary given
that the triConsistentFn isn't supposed to scribble on its input.
We can easily adjust the array contents incrementally instead.
The other part of it is that the triConsistentFn may itself take
O(N) time (and does in this test case). This is all extremely
brute force: in simple cases with AND or OR semantics, we could
know without any looping whatever that all or none of the keys
are required. But GIN opclasses don't have any API for exposing
that knowledge, so at least in the short run there is little to
be done about that. Put in a CHECK_FOR_INTERRUPTS so that at
least the loop is cancelable.
These two changes together resolve the primary complaint that
the test query doesn't respond promptly to cancel interrupts.
Also, while they don't completely eliminate the O(N^2) behavior,
they do provide quite a nice speedup for mid-sized examples.
Bug: #18831
Reported-by: Niek <niek.brasa@hitachienergy.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18831-e845ac44ebc5dd36@postgresql.org
Backpatch-through: 13
This bogus error message was introduced in 2013 by commit f177cbfe67,
because of misunderstanding the processCASbits() API; at the time, no
test cases were added that would be affected by this change. Only in
ca87c415e2 was one added (along with a couple of typos), with an XXX
note that the error message was bogus. Fix the whole, add some test
cases.
Backpatch all the way back.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/202503041822.aobpqke3igvb@alvherre.pgsql
If a domain type has a default, adding a column of that type (without
any explicit DEFAULT clause) failed to install the domain's default
value in existing rows, instead leaving the new column null. This
is unexpected, and it used to work correctly before v11. The cause
is confusion in the atthasmissing mechanism about which default value
to install: we'd only consider installing an explicitly-specified
default, and then we'd decide that no table rewrite is needed.
To fix, take the responsibility for filling attmissingval out of
StoreAttrDefault, and instead put it into ATExecAddColumn's existing
logic that derives the correct value to fill the new column with.
Also, centralize the logic that determines the need for
default-related table rewriting there, instead of spreading it over
four or five places.
In the back branches, we'll leave the attmissingval-filling code
in StoreAttrDefault even though it's now dead, for fear that some
extension may be depending on that functionality to exist there.
A separate HEAD-only patch will clean up the now-useless code.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
Backpatch-through: 13
Absorb upstream bug fix (their commit
e322673a841d9abd69994ae8cd20e191090b6ef4), which prevents a null
pointer dereference crash if SN_create_env() gets a malloc failure
at just the wrong point.
Thanks to Maksim Korotkov for discovering the null-pointer
bug and submitting the fix to upstream snowball.
Reported-by: Maksim Korotkov <m.korotkov@postgrespro.ru>
Author: Maksim Korotkov <m.korotkov@postgrespro.ru>
Discussion: https://postgr.es/m/1d1a46-67ab1000-21-80c451@83151435
Backpatch-through: 13
When considering a local buffer, the GetBufferDescriptor() call in
BufferGetLSNAtomic() would be retrieving a shared buffer with a bad
buffer ID. Since the code checks whether the buffer is shared before
using the retrieved BufferDesc, this issue did not lead to any
malfunction. Nonetheless this seems like trouble waiting to happen,
so fix it by ensuring that GetBufferDescriptor() is only called when
we know the buffer is shared.
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAHewXNku-o46-9cmUgyv6LkSZ25doDrWq32p=oz9kfD8ovVJMg@mail.gmail.com
Backpatch-through: 13
When an UPDATE trigger referencing a new table and a DELETE trigger
referencing an old table are both present, MakeTransitionCaptureState()
returns an inconsistent result for UPDATE commands in its set of flags
and tuplestores holding the TransitionCaptureState for transition
tables.
As proved by the test added here, this issue causes a crash in v14 and
earlier versions (down to 11, actually, older versions do not support
triggers on partitioned tables) during cross-partition updates on a
partitioned table. v15 and newer versions are safe thanks to
7103ebb7aa.
This commit fixes the function so that it returns a consistent state
by using portions of the changes made in commit 7103ebb7aa for v13 and
v14. v15 and newer versions are slightly tweaked to match with the
older versions, mainly for consistency across branches.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20250207.150238.968446820828052276.horikyota.ntt@gmail.com
Backpatch-through: 13
logging_collector was only mentioning stderr and csvlog, and forgot
about jsonlog. Oversight in dc686681e0, that has added support for
jsonlog in log_destination.
While on it, the description in the GUC table is tweaked to be more
consistent with the documentation and postgresql.conf.sample.
Author: Umar Hayat
Reviewed-by: Ashutosh Bapat, Tom Lane
Discussion: https://postgr.es/m/CAD68Dp1K_vBYqBEukHw=1jF7e76t8aszGZTFL2ugi=H7r=a7MA@mail.gmail.com
Backpatch-through: 13
smgrDoPendingSyncs had two distinct risks of integer overflow while
deciding which way to ensure durability of a newly-created relation.
First, it accumulated the total size of all forks in a variable of
type BlockNumber (uint32). While we restrict an individual fork's
size to fit in that, I don't believe there's such a restriction on
all of them added together. Second, it proceeded to multiply the
sum by BLCKSZ, which most certainly could overflow a uint32.
(The exact expression is total_blocks * BLCKSZ / 1024. The
compiler might choose to optimize that to total_blocks * 8,
which is not at quite as much risk of overflow as a literal
reading would be, but it's still wrong.)
If an overflow did occur it could lead to a poor choice to
shove a very large relation into WAL instead of fsync'ing it.
This wouldn't be fatal, but it could be inefficient.
Change total_blocks to uint64 which should be plenty, and
rearrange the comparison calculation to be overflow-safe.
I noticed this while looking for ramifications of the proposed
change in MAX_KILOBYTES. It's not entirely clear to me why
wal_skip_threshold is limited to MAX_KILOBYTES in the
first place, but in any case this code is unsafe regardless
of the range of wal_skip_threshold.
Oversight in c6b92041d which introduced wal_skip_threshold,
so back-patch to v13.
Discussion: https://postgr.es/m/1a01f0-66ec2d80-3b-68487680@27595217
Backpatch-through: 13
The right mix of DDL and VACUUM could corrupt a catalog page header such
that PageIsVerified() durably fails, requiring a restore from backup.
This affects only catalogs that both have a syscache and have DDL code
that uses syscache tuples to construct updates. One of the test
permutations shows a variant not yet fixed.
This makes !TransactionIdIsValid(TM_FailureData.xmax) possible with
TM_Deleted. I think core and PGXN are indifferent to that.
Per bug #17821 from Alexander Lakhin. Back-patch to v13 (all supported
versions). The test case is v17+, since it uses INJECTION_POINT.
Discussion: https://postgr.es/m/17821-dd8c334263399284@postgresql.org
The sizeof() call should reference buffer.data, because that's the
buffer we're reading data into, not the whole PGAlignedBuffer union.
This was introduced by 44cac93464, which replaced the simple buffer
with a PGAlignedBuffer field.
It's benign, because the buffer is the largest field of the union, so
the sizes are the same. But it's easy to trip over this in a patch, so
fix and backpatch. Commit 44cac93464 went into 12, but that's EOL.
Backpatch-through: 13
Discussion: https://postgr.es/m/928bdab1-6567-449f-98c4-339cd2203b87@vondra.me
This patch fixes two distinct errors that both ultimately trace
to commit 71d60e2aa, which added the ats_modifiedcols field.
The more severe error is that ats_modifiedcols wasn't accounted for
in afterTriggerAddEvent's scanning loop that looks for a pre-existing
duplicate AfterTriggerSharedData. Thus, a new event could be
incorrectly matched to an AfterTriggerSharedData that has a different
value of ats_modifiedcols, resulting in the wrong tg_updatedcols
bitmap getting passed to the trigger whenever it finally gets fired.
We'd not noticed because (a) few triggers consult tg_updatedcols,
and (b) we had no tests exercising a case where such a trigger was
called as an AFTER trigger. In the test case added by this commit,
contrib/lo's trigger fails to remove a large object when expected
because (without this fix) it thinks the LO OID column hasn't changed.
The other problem was introduced by commit ce5aaea8c, which copied the
modified-columns bitmap into trigger-related storage. It made a copy
for every trigger event, whereas what we really want is to make a new
copy only when we make a new AfterTriggerSharedData entry. (We could
imagine adding extra logic to reduce the number of bitmap copies still
more, but it doesn't look worthwhile at the moment.) In a simple test
of an UPDATE of 10000000 rows with a single AFTER trigger, this thinko
roughly tripled the amount of memory consumed by the pending-triggers
data structures, from 160446744 to 480443440 bytes.
Fixing the first problem requires introducing a bms_equal() call into
afterTriggerAddEvent's scanning loop, which is slightly annoying from
a speed perspective. However, getting rid of the excessive bms_copy()
calls from the second problem balances that out; overall speed of
trigger operations is the same or slightly better, in my tests.
Discussion: https://postgr.es/m/3496294.1737501591@sss.pgh.pa.us
Backpatch-through: 13
XLogPageRead() checks immediately for an invalid WAL record header on a
standby, to be able to handle the case of continuation records that need
to be read across two different sources. As written, the check was too
generic, applying to any target LSN. Based on an analysis by Kyotaro
Horiguchi, what really matters is to make sure that the page header is
checked when attempting to read a LSN at the boundary of a segment, to
handle the case of a continuation record that spawns across multiple
pages when dealing with multiple segments, as WAL receivers are spawned
they request WAL from the beginning of a segment. This fix has been
proposed by Kyotaro Horiguchi.
This could cause standbys to loop infinitely when dealing with a
continuation record during a timeline jump, in the case where the
contents of the record in the follow-up page are invalid.
Some regression tests are added to check such scenarios, able to
reproduce the original problem. In the test, the contents of a
continuation record are overwritten with junk zeros on its follow-up
page, and replayed on standbys. This is inspired by 039_end_of_wal.pl,
and is enough to show how standbys should react on promotion by not
being stuck. Without the fix, the test would fail with a timeout. The
test to reproduce the problem has been written by Alexander Kukushkin.
The original check has been introduced in 0668719801, for a similar
problem.
Author: Kyotaro Horiguchi, Alexander Kukushkin
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFh8B=mozC+e1wGJq0H=0O65goZju+6ab5AU7DEWCSUA2OtwDg@mail.gmail.com
Backpatch-through: 13
This commit reverts 8f67f994e8 (down to v13) and c3de0f9eed (down to
v17), as these are proving to not be completely correct regarding two
aspects:
- In v17 and newer branches, c3de0f9eed38's check for epoch handling is
incorrect, and does not correctly handle frozen epochs. A logic closer
to widen_snapshot_xid() should be used. The 2PC code should try to
integrate deeper with FullTransactionIds, 5a1dfde833 being not enough.
- In v13 and newer branches, 8f67f994e8 is a workaround for the real
issue, which is that we should not attempt CLOG lookups without reaching
consistency. This exists since 728bd991c3, and this is reachable with
ProcessTwoPhaseBuffer() called by restoreTwoPhaseData() at the beginning
of recovery.
Per discussion with Noah Misch.
Discussion: https://postgr.es/m/20250116010051.f3.nmisch@google.com
Backpatch-through: 13
We should run the expression subtrees of PartitionedRelPruneInfo
structs through fix_scan_expr. Failure to do so means that
AlternativeSubPlans within those expressions won't be cleaned up
properly, resulting in "unrecognized node type" errors since v14.
It seems fairly likely that at least some of the other steps done
by fix_scan_expr are important here as well, resulting in as-yet-
undetected bugs. Therefore, I've chosen to back-patch this to
all supported branches including v13, even though the known
symptom doesn't manifest in v13.
Per bug #18778 from Alexander Lakhin.
Discussion: https://postgr.es/m/18778-24cd399df6c806af@postgresql.org
If a new catalog tuple is inserted that belongs to a catcache list
entry, and cache invalidation happens while the list entry is being
built, the list entry might miss the newly inserted tuple.
To fix, change the way we detect concurrent invalidations while a
catcache entry is being built. Keep a stack of entries that are being
built, and apply cache invalidation to those entries in addition to
the real catcache entries. This is similar to the in-progress list in
relcache.c.
Back-patch to all supported versions. (This commit to v13 a few hours
later than other branches, because I somehow missed v13 in the first
batch.)
Reviewed-by: Noah Misch
Discussion: https://www.postgresql.org/message-id/2234dc98-06fe-42ed-b5db-ac17384dc880@iki.fi
This function expects an "int64" as result and stores the number of
pages to add to the index scan bitmap as an "int", multiplying its final
result by 10. For a relation large enough, this can theoretically
overflow if counting more than (INT32_MAX / 10) pages, knowing that the
number of pages is upper-bounded by MaxBlockNumber.
To avoid the overflow, this commit redefines "totalpages", used to
calculate the result, to be an "int64" rather than an "int".
Reported-by: Evgeniy Gorbanyov
Author: James Hunter
Discussion: https://www.postgresql.org/message-id/07704817-6fa0-460c-b1cf-cd18f7647041@basealt.ru
Backpatch-through: 13
Commit 27a1f8d108 missed updating the max HBA option count to
account for the new option added. Fix by bumping the counter
and adjust the relevant comment to match. Backpatch down to
all supported branches like the erroneous commit.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/286764.1736697356@sss.pgh.pa.us
Backpatch-through: v13
When deparsing an XMLTABLE() expression, XML namespace names were not
quoted. However, since they are parsed as ColLabel tokens, some names
require double quotes to ensure that they are properly interpreted.
Fix by using quote_identifier() in the deparsing code.
Back-patch to all supported versions.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCXTpAS%3DncfLNTZ7YS6O5puHeLg_SUYAit%2Bcs7wsrd9Msg%40mail.gmail.com
This is a cherry pick of 4c8e00ae from the 14 branch into the 13 branch.
It avoids an assertion failure when ForwardSyncRequest() tries to
allocate memory while trying to compact the queue, if run in a critical
section. RelationTruncate() gained a critical section in 38c579b0, and
could fail in that way in the 13 branch.
b1ffe3ff originally fixed the same problem with TruncateMultiXact(), but
for that case it only needed to go back as far as 14, where SLRUs
started using the sync request queue. It also fixed a related deadlock
risk that doesn't apply in this case (this case doesn't wait), but it
might exist in theory and it doesn't hurt to keep the code the same as
later branches.
Author: Heikki Linnakangas <heikki.linnakangas@iki.fi> (original commit)
Reviewed-by: Michael Paquier <michael@paquier.xyz> (in this new context)
Reported-by: Yura Sokolov <y.sokolov@postgrespro.ru>
Discussion: https://postgr.es/m/f98aaa79-80b5-47c9-832a-31416a3a528b%40postgrespro.ru
Commit 66aaabe7 (branches 13 - 17 only) was not acceptable to the Oracle
Developer Studio compiler on build farm animal wrasse. It accidentally
used a C++ style return statement to wrap a void function. None of the
usual compilers complained, but it is right, that is not allowed in C.
Fix.
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Z33vgfVgvOnbFLN9%40paquier.xyz
pgoutput caches the attribute map of a relation, that is free()'d only
when validating a RelationSyncEntry. However, this code path is not
taken when calling any of the SQL functions able to do some logical
decoding, like pg_logical_slot_{get,peek}_changes(), leaking some memory
into CacheMemoryContext on repeated calls.
This is a follow-up of c9b3d4909b, this time for v13 and v14. The
relation attribute map is stored in a dedicated memory context, tracked
with a static variable whose state is reset with a MemoryContext reset
callback attached to PGOutputData->context. This implementation is
similar to the approach taken by cfd6cbcf9b.
Reported-by: Masahiko Sawada
Author: Vignesh C
Reviewed-by: Hou Zhijie
Discussion: https://postgr.es/m/CAD21AoDkAhQVSukOfH3_reuF-j4EU0-HxMqU3dU+bSTxsqT14Q@mail.gmail.com
Discussion: https://postgr.es/m/CALDaNm1hewNAsZ_e6FF52a=9drmkRJxtEPrzCB6-9mkJyeBBqA@mail.gmail.com
Backpatch-through: 13
It's possible that external code is calling smgrtruncate(). Any
external callers might like to consider the recent changes to
RelationTruncate(), but commit 38c579b0 should not have changed the
function prototype in the back-branches, per ABI stability policy.
Restore smgrtruncate()'s traditional argument list in the back-branches,
but make it a wrapper for a new function smgrtruncate2(). The three
callers in core can use smgrtruncate2() directly. In master (18-to-be),
smgrtruncate2() is effectively renamed to smgrtruncate(), so this wart
is cleaned up.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKG%2BThae6x6%2BjmQiuALQBT2Ae1ChjMh1%3DkMvJ8y_SBJZrvA%40mail.gmail.com
Before 728bd991c3, that has improved the support for 2PC files during
recovery, the initial logic scanning files in pg_twophase was done so as
files in the future of the transaction ID horizon were checked first,
followed by a check if a transaction ID is aborted or committed which
could involve a pg_xact lookup. After this commit, these checks have
been done in reverse order.
Files detected as in the future do not have a state that can be checked
in pg_xact, hence this caused recovery to fail abruptly should an
orphaned 2PC file in the future of the transaction ID horizon exist in
pg_twophase at the beginning of recovery.
A test is added to check for this scenario, using an empty 2PC with a
transaction ID large enough to be in the future when running the test.
This test is added in 16 and older versions for now. 17 and newer
versions are impacted by a second bug caused by the addition of the
epoch in the 2PC file names. An equivalent test will be added in these
branches in a follow-up commit, once the second set of issues reported
are fixed.
Author: Vitaly Davydov, Michael Paquier
Discussion: https://postgr.es/m/11e597-676ab680-8d-374f23c0@145466129
Backpatch-through: 13
Cause parallel workers to not check datallowconn, rolcanlogin, and
ACL_CONNECT privileges. The leader already checked these things
(except for rolcanlogin which might have been checked for a different
role). Re-checking can accomplish little except to induce unexpected
failures in applications that might not even be aware that their query
has been parallelized. We already had the principle that parallel
workers rely on their leader to pass a valid set of authorization
information, so this change just extends that a bit further.
Also, modify the ReservedConnections, datconnlimit and rolconnlimit
logic so that these limits are only enforced against regular backends,
and only regular backends are counted while checking if the limits
were already reached. Previously, background processes that had an
assigned database or role were subject to these limits (with rather
random exclusions for autovac workers and walsenders), and the set of
existing processes that counted against each limit was quite haphazard
as well. The point of these limits, AFAICS, is to ensure the
availability of PGPROC slots for regular backends. Since all other
types of processes have their own separate pools of PGPROC slots, it
makes no sense either to enforce these limits against them or to count
them while enforcing the limit.
While edge-case failures of these sorts have been possible for a
long time, the problem got a good deal worse with commit 5a2fed911
(CVE-2024-10978), which caused parallel workers to make some of these
checks using the leader's current role where before we had used its
AuthenticatedUserId, thus allowing parallel queries to fail after
SET ROLE. The previous behavior was fairly accidental and I have
no desire to return to it.
This patch includes reverting 73c9f91a1, which was an emergency hack
to suppress these same checks in some cases. It wasn't complete,
as shown by a recent bug report from Laurenz Albe. We can also revert
fd4d93d26 and 492217301, which hacked around the same problems in one
regression test.
In passing, remove the special case for autovac workers in
CheckMyDatabase; it seems cleaner to have AutoVacWorkerMain pass
the INIT_PG_OVERRIDE_ALLOW_CONNS flag, now that that does what's
needed.
Like 5a2fed911, back-patch to supported branches (which sadly no
longer includes v12).
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
Commit aac2c9b4fd mandated such locking
and attempted to fulfill that mandate, but it missed REASSIGN OWNED.
Hence, it remained possible to lose VACUUM's inplace update of
datfrozenxid if a REASSIGN OWNED processed that database at the same
time. This didn't affect the other inplace-updated catalog, pg_class.
For pg_class, REASSIGN OWNED calls ATExecChangeOwner() instead of the
generic AlterObjectOwner_internal(), and ATExecChangeOwner() fulfills
the locking mandate.
Like in GRANT, implement this by following the locking protocol for any
catalog subject to the generic AlterObjectOwner_internal(). It would
suffice to do this for IsInplaceUpdateOid() catalogs only. Back-patch
to v13 (all supported versions).
Kirill Reshke. Reported by Alexander Kukushkin.
Discussion: https://postgr.es/m/CAFh8B=mpKjAy4Cuun-HP-f_vRzh2HSvYFG3rhVfYbfEBUhBAGg@mail.gmail.com
The pgoutput module caches publication names in a list and frees it upon
invalidation. However, the code forgot to free the actual publication
names within the list elements, as publication names are pstrdup()'d in
GetPublication(). This would cause memory to leak in
CacheMemoryContext, bloating it over time as this context is not
cleaned.
This is a problem for WAL senders running for a long time, as an
accumulation of invalidation requests would bloat its cache memory
usage. A second case, where this leak is easier to see, involves a
backend calling SQL functions like pg_logical_slot_{get,peek}_changes()
which create a new decoding context with each execution. More
publications create more bloat.
To address this, this commit adds a new memory context within the
logical decoding context and resets it each time the publication names
cache is invalidated, based on a suggestion from Amit Kapila. This
ensures that the lifespan of the publication names aligns with that of
the logical decoding context.
Contrary to the HEAD-only commit f0c569d715 that has changed
PGOutputData to track this new child memory context, the context is
tracked with a static variable whose state is reset with a MemoryContext
reset callback attached to PGOutputData->context, so as ABI
compatibility is preserved in stable branches. This approach is based
on an suggestion from Amit Kapila.
Analyzed-by: Michael Paquier, Jeff Davis
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Michael Paquier, Euler Taveira, Hou Zhijie
Discussion: https://postgr.es/m/Z0khf9EVMVLOc_YY@paquier.xyz
Backpatch-through: 13
GetSnapshotData() set TransactionXmin = MyProc->xmin, but when
SnapshotResetXmin() advanced MyProc->xmin, it did not advance
TransactionXmin correspondingly. That meant that TransactionXmin could
be older than MyProc->xmin, and XIDs between than TransactionXmin and
the real MyProc->xmin could be vacuumed away. One known consequence is
in pg_subtrans lookups: we might try to look up the status of an XID
that was already truncated away.
Back-patch to all supported versions.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/d27a046d-a1e4-47d1-a95c-fbabe41debb4@iki.fi
