Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
CreateRole() was passing a Value node, not a RoleSpec node, for the
newly-created role name when adding the role as a member of existing
roles for the IN ROLE syntax.
This mistake went unnoticed because the node in question is used only
for error messages and is not accessed on non-error paths.
In older pg versions (such as 9.5 where this was found), this results
in an "unexpected node type" error in place of the real error. That
node type check was removed at some point, after which the code would
accidentally fail to fail on 64-bit platforms (on which accessing the
Value node as if it were a RoleSpec would be mostly harmless) or give
an "unexpected role type" error on 32-bit platforms.
Fix the code to pass the correct node type, and add an lfirst_node
assertion just in case.
Per report on irc from user m1chelangelo.
Backpatch all the way, because this error has been around for a long
time.
Sticking this comment at the end of the last line was a bad idea: it's
not particularly readable, and it tempts pgindent to mess with line
breaks within the comment, which in turn reveals that win32tzlist.pl's
clean_displayname() does the wrong thing to clean up such line breaks.
While that's not hard to fix, there's basically no excuse for this
arrangement to begin with, especially since it makes the table layout
needlessly vary across back branches with different pgindent rules.
Let's just put the comment inside the braces, instead.
This commit just moves and reformats the comments, and updates
win32tzlist.pl to match; there's no actual data change.
Per odd-looking results from Juan José Santamaría Flecha.
Back-patch, since the point is to make win32_tzmap[] look the
same in all supported branches again.
Discussion: https://postgr.es/m/5752.1587740484@sss.pgh.pa.us
DST law changes in Morocco and the Canadian Yukon.
Historical corrections for Shanghai.
The America/Godthab zone is renamed to America/Nuuk to reflect
current English usage; however, the old name remains available as a
compatibility link.
The test is proving to have timing issues when looking at archive status
files on standbys after crash recovery, while other parts of the test
rely on pg_stat_archiver as a wait point to make sure that a given state
of the archiving is reached. The coverage is not heavily impacted by
the removal those extra tests.
Per reports from several buildfarm animals, like crake, piculet,
culicidae and francolin.
Discussion: https://postgr.es/m/20200424005929.GK33034@paquier.xyz
Backpatch-through: 9.5
78ea8b5 has fixed an issue related to the recycling of WAL segments on
standbys depending on archive_mode. However, it has introduced a
regression with the handling of WAL segments ready to be archived during
crash recovery, causing those files to be recycled without getting
archived.
This commit fixes the regression by tracking in shared memory if a live
cluster is either in crash recovery or archive recovery as the handling
of WAL segments ready to be archived is different in both cases (those
WAL segments should not be removed during crash recovery), and by using
this new shared memory state to decide if a segment can be recycled or
not. Previously, it was not possible to know if a cluster was in crash
recovery or archive recovery as the shared state was able to track only
if recovery was happening or not, leading to the problem.
A set of TAP tests is added to close the gap here, making sure that WAL
segments ready to be archived are correctly handled when a cluster is in
archive or crash recovery with archive_mode set to "on" or "always", for
both standby and primary.
Reported-by: Benoît Lobréau
Author: Jehan-Guillaume de Rorthais
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200331172229.40ee00dc@firost
Backpatch-through: 9.5
Checking if Subject Alternative Names (SANs) from a certificate match
with the hostname connected to leaked memory after each lookup done.
This is broken since acd08d7 that added support for SANs in SSL
certificates, so backpatch down to 9.5.
Author: Roman Peshkurov
Reviewed-by: Hamid Akhtar, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CALLDf-pZ-E3mjxd5=bnHsDu9zHEOnpgPgdnO84E2RuwMCjjyPw@mail.gmail.com
Backpatch-through: 9.5
index.c supposed that it could just use a PG_TRY block to clean up the
state associated with an active REINDEX operation. However, that code
doesn't run if we do a FATAL exit --- for example, due to a SIGTERM
shutdown signal --- while the REINDEX is happening. And that state does
get consulted during catalog accesses, which makes it problematic if we
do any catalog accesses during shutdown --- for example, to clean up any
temp tables created in the session.
If this combination of circumstances occurred, we could find ourselves
trying to access already-freed memory. In debug builds that'd fairly
reliably cause an assertion failure. In production we might often
get away with it, but with some bad luck it could cause a core dump.
Another possible bad outcome is an erroneous conclusion that an
index-to-be-accessed is being reindexed; but it looks like that would
be unlikely to have any consequences worse than failing to drop temp
tables right away. (They'd still get dropped by the next session that
uses that temp schema.)
To fix, get rid of the use of PG_TRY here, and instead hook into
the transaction abort mechanisms to clean up reindex state.
Per bug #16378 from Alexander Lakhin. This has been wrong for a
very long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/16378-7a70ca41b3ec2009@postgresql.org
Apparently in some language versions of Visual Studio nmake outputs some
material after the version number and before the end of the line. This
has been seen in Chinese versions. Therefore, we no longer demand that
the version string comes at the end of a line.
Per complaint from Cuiping Lin.
Backpatch to all live branches.
fixup_whole_row_references() did the wrong thing with a dropped column,
resulting in a commit-time warning about a cache reference leak.
I (tgl) added a test case exercising this, but back-patched the test
only as far as v10; the patch didn't apply cleanly to 9.6 and it
didn't seem worth the trouble to adapt it. The bug is pretty old
though, so apply the code change all the way back.
Michael Luo, with cosmetic improvements by me
Discussion: https://postgr.es/m/BYAPR08MB5606D1453D7F50E2AF4D2FD29AD80@BYAPR08MB5606.namprd08.prod.outlook.com
ExecReScanHashJoin will destroy the join's hash table if it expects
that the inner relation will produce different rows on rescan.
Up to now it's not bothered to clear the additional pointer to that
hash table that exists in the child HashState node. However, it's
possible for the query to terminate without building a fresh hash
table (this happens if the outer relation is found to be empty
during the final rescan). So we can end with a dangling pointer
to a deleted hash table. That was harmless originally, but since
9.0 EXPLAIN ANALYZE has used that pointer to print hash table
statistics. In debug builds this reproducibly results in garbage
statistics. In non-debug builds there's frequently no ill effects,
but in principle one could get wrong EXPLAIN ANALYZE output, or
perhaps even a crash if free() has released the hashtable memory
back to the OS.
To fix, just make sure we clear the additional pointer when destroying
the hash table. In problematic cases, EXPLAIN ANALYZE will then print
no hashtable statistics (reverting to its pre-9.0 behavior). This isn't
ideal, but since the problem manifests only in unusual corner cases,
it's hard to justify taking any risks to do better in the back
branches. A follow-on patch will improve matters in HEAD.
Konstantin Knizhnik and Tom Lane, per diagnosis by Thomas Munro
of a trouble report from Alvaro Herrera.
Discussion: https://postgr.es/m/20200323165059.GA24950@alvherre.pgsql
The docs explained that a SHARE ROW EXCLUSIVE lock is needed on the
referenced table, but failed to say the same about the table being
altered. Since the page says that ACCESS EXCLUSIVE lock is taken
unless otherwise stated, this left readers with the wrong conclusion.
Discussion: https://postgr.es/m/834603375.3470346.1586482852542@mail.yahoo.com
CREATE GROUP is an exact alias for CREATE ROLE, and CREATE USER is
almost an exact alias, as can easily be confirmed by checking the
code. So the man page syntax descriptions ought to match up. The
last few additions of role options seem to have forgotten to update
create_group.sgml, though. Fix that, and add a naggy reminder to
create_role.sgml in hopes of not forgetting again.
Discussion: https://postgr.es/m/158647836143.655.9853963229391401576@wrigleys.postgresql.org
Repair an oversight in commit 8728b2c70: if we're postponing restore
of event triggers to the end, we must also postpone restoring any
comments on them, since of course we cannot create the comments first.
(This opens yet another opportunity for an event trigger to bollix
the restore, but there's no help for that.)
Per bug #16346 from Alexander Lakhin.
Like the previous commit, back-patch to all supported branches.
Hamid Akhtar and Tom Lane
Discussion: https://postgr.es/m/16346-6210ad7a0ea81be1@postgresql.org
Our documentation describes four allowed input syntaxes for circles,
but the regression tests tried only three ... with predictable
consequences. Remarkably, this has been wrong since the circle
datatype was added in 1997, but nobody noticed till now.
David Zhang, with some help from me
Discussion: https://postgr.es/m/332c47fa-d951-7574-b5cc-a8f7f7201202@highgo.ca
Since the existing bit number argument can't exceed INT32_MAX, it's
not possible for these functions to manipulate bits beyond the first
256MB of a bytea value. However, it'd be good if they could do at
least that much, and not fall over entirely for longer bytea values.
Adjust the comparisons to be done in int64 arithmetic so that works.
Also tweak the error reports to show sane values in case of overflow.
Also add some test cases to improve the miserable code coverage
of these functions.
Apply patch to back branches only; HEAD has a better solution
as of commit 26a944cf2.
Extracted from a much larger patch by Movead Li
Discussion: https://postgr.es/m/20200312115135445367128@highgo.ca
In 9.6 and up, gin_test_tbl has autovacuum_enabled = off thanks to
commit f8a1c1d5a. 9.5 lacked that, which allowed autovacuum to
bollix the results of the test case added by commit 8150f7813.
We could fool with disabling seqscan around that test, but making
this branch look more like the later ones seems a better answer.
Per buildfarm member protosciurus. (I'm not very sure why
protosciurus is the only animal to report this so far; but it'd
clearly be a timing-related failure, so it's not astonishing that
only some machines would show it.)
A table rewritten by ALTER TABLE would lose tracking of an index usable
for CLUSTER. This setting is tracked by pg_index.indisclustered and is
controlled by ALTER TABLE, so some extra work was needed to restore it
properly. Note that ALTER TABLE only marks the index that can be used
for clustering, and does not do the actual operation.
Author: Amit Langote, Justin Pryzby
Reviewed-by: Ibrar Ahmed, Michael Paquier
Discussion: https://postgr.es/m/20200202161718.GI13621@telsasoft.com
Backpatch-through: 9.5
There's a very low risk that RecentGlobalXmin could be far enough in
the past to be older than relfrozenxid, or even wrapped
around. Luckily the consequences of that having happened wouldn't be
too bad - the page wouldn't be pruned for a while.
Avoid that risk by using TransactionXmin instead. As that's announced
via MyPgXact->xmin, it is protected against wrapping around (see code
comments for details around relfrozenxid).
Author: Andres Freund
Discussion: https://postgr.es/m/20200328213023.s4eyijhdosuc4vcj@alap3.anarazel.de
Backpatch: 9.5-
entryGetItem()'s three code paths each contained bugs associated
with filtering the entries for gin_fuzzy_search_limit.
The posting-tree path failed to advance "advancePast" after having
decided to filter an item. If we ran out of items on the current
page and needed to advance to the next, what would actually happen
is that entryLoadMoreItems() would re-load the same page. Eventually,
the random dropItem() test would accept one of the same items it'd
previously rejected, and we'd move on --- but it could take awhile
with small gin_fuzzy_search_limit. To add insult to injury, this
case would inevitably cause entryLoadMoreItems() to decide it needed
to re-descend from the root, making things even slower.
The posting-list path failed to implement gin_fuzzy_search_limit
filtering at all, so that all entries in the posting list would
be returned.
The bitmap-result path used a "gotitem" variable that it failed to
update in the one place where it'd actually make a difference, ie
at the one "continue" statement. I think this was unreachable in
practice, because if we'd looped around then it shouldn't be the
case that the entries on the new page are before advancePast.
Still, the "gotitem" variable was contributing nothing to either
clarity or correctness, so get rid of it.
Refactor all three loops so that the termination conditions are
more alike and less unreadable.
The code coverage report showed that we had no coverage at all for
the re-descend-from-root code path in entryLoadMoreItems(), which
seems like a very bad thing, so add a test case that exercises it.
We also had exactly no coverage for gin_fuzzy_search_limit, so add a
simplistic test case that at least hits those code paths a little bit.
Back-patch to all supported branches.
Adé Heyward and Tom Lane
Discussion: https://postgr.es/m/CAEknJCdS-dE1Heddptm7ay2xTbSeADbkaQ8bU2AXRCVC2LdtKQ@mail.gmail.com
contrib/lo's lo_manage() thought it could use
trigdata->tg_trigger->tgname in its error message about
not being called as a trigger. That naturally led to a core dump.
unique_key_recheck() figured it could Assert that fcinfo->context
is a TriggerData node in advance of having checked that it's
being called as a trigger. That's harmless in production builds,
and perhaps not that easy to reach in any case, but it's logically
wrong.
The first of these per bug #16340 from William Crowell;
the second from manual inspection of other CALLED_AS_TRIGGER
call sites.
Back-patch the lo.c change to all supported branches, the
other to v10 where the thinko crept in.
Discussion: https://postgr.es/m/16340-591c7449dc7c8c47@postgresql.org
Experimentation shows that it's not hard at all to drive the
old implementation of "ltree ~ lquery" match to stack overflow,
so throw in a check_stack_depth() call, as I just did in HEAD.
I wasn't able to make it take a long time, because all the
pathological cases I tried hit stack overflow first; but
I bet there are some others that do take a long time, so add
CHECK_FOR_INTERRUPTS() too.
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
GetLocaleInfoEx() can fail on strings that setlocale() was perfectly
happy with. A common way for that to happen is if the locale string
is actually a Unix-style string, say "et_EE.UTF-8". In that case,
what's after the dot is an encoding name, not a Windows codepage number;
blindly treating it as a codepage number led to failure, with a fairly
silly error message. Hence, check to see if what's after the dot is
all digits, and if not, treat it as a literal encoding name rather than
a codepage number. This will do the right thing with many Unix-style
locale strings, and produce a more sensible error message otherwise.
Somewhat independently of that, treat a zero (CP_ACP) result from
GetLocaleInfoEx() as meaning that we must use UTF-8 encoding.
Back-patch to all supported branches.
Juan José Santamaría Flecha
Discussion: https://postgr.es/m/24905.1585445371@sss.pgh.pa.us
The documentation says that the max length is 255 bytes, but
code inspection says it's actually 255 characters; and relevant
lengths are stored as uint16 so that that works.
These uint16 fields could be overflowed by excessively long input,
producing strange results. Complain for invalid input.
Likewise check for out-of-range values of the repeat counts in lquery.
(We don't try too hard on that one, notably not bothering to detect
if atoi's result has overflowed.)
Also detect length overflow in ltree_concat.
In passing, be more consistent about whether "syntax error" messages
include the type name. Also, clarify the documentation about what
the size limit is.
This has been broken for a long time, so back-patch to all supported
branches.
Nikita Glukhov, reviewed by Benjie Gillam and Tomas Vondra
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
In 9.4 I added support to use a historical snapshot in
ScanPgRelation(), while adding logical decoding. Unfortunately a
conflict with the concurrent removal of SnapshotNow was incorrectly
resolved, leading to an unregistered snapshot being used.
It is not correct to use an unregistered (or non-active) snapshot for
anything non-trivial, because catalog invalidations can cause the
snapshot to be invalidated.
Luckily it seems unlikely to actively cause problems in practice, as
ScanPgRelation() requires that we already have a lock on the relation,
we only look for a single row, and we don't appear to rely on the
result's tid to be correct. It however is clearly wrong and potential
negative consequences would likely be hard to find. So it seems worth
backpatching the fix, even without a concrete hazard.
Discussion: https://postgr.es/m/20200229052459.wzhqnbhrriezg4v2@alap3.anarazel.de
Backpatch: 9.5-
plpgsql_xact_cb ought to treat events XACT_EVENT_PARALLEL_COMMIT and
XACT_EVENT_PARALLEL_ABORT like XACT_EVENT_COMMIT and XACT_EVENT_ABORT
respectively, since its goal is to do process-local cleanup. This
oversight caused plpgsql's end-of-transaction cleanup to not get done
in parallel workers. Since a parallel worker will exit just after the
transaction cleanup, the effects of this are limited. I couldn't find
any case in the core code with user-visible effects, but perhaps there
are some in extensions. In any case it's wrong, so let's fix it before
it bites us not after.
In passing, add some comments around the handling of expression
evaluation resources in DO blocks. There's no live bug there, but it's
quite unobvious what's happening; at least I thought so. This isn't
related to the other issue, except that I found both things while poking
at expression-evaluation performance.
Back-patch the plpgsql_xact_cb fix to 9.5 where those event types
were introduced, and the DO-block commentary to v11 where DO blocks
gained the ability to issue COMMIT/ROLLBACK.
Discussion: https://postgr.es/m/10353.1585247879@sss.pgh.pa.us
src/port/getopt_long.c failed on such an argument, always seeing it
as an unrecognized switch. This is unhelpful; better is to treat such
an item as a non-switch argument. That behavior is what we find in
GNU's getopt_long(); it's what src/port/getopt.c does; and it is
required by POSIX for getopt(), which getopt_long() ought to be
generally a superset of. Moreover, it's expected by ecpg, which
intends an argument of "-" to mean "read from stdin". So fix it.
Also add some documentation about ecpg's behavior in this area, since
that was miserably underdocumented. I had to reverse-engineer it
from the code.
Per bug #16304 from James Gray. Back-patch to all supported branches,
since this has been broken forever.
Discussion: https://postgr.es/m/16304-c662b00a1322db7f@postgresql.org
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Back-patch a subset of commit 9155580fd5
to v11, v10, 9.6, and 9.5. Include the latest repairs to this function.
Use a new XLOG_FPI_MULTI value instead of reusing XLOG_FPI. That way,
if an older server reads WAL from this function, that server will PANIC
instead of applying just one page of the record. The next commit adds a
call to this function.
Discussion: https://postgr.es/m/20200304.162919.898938381201316571.horikyota.ntt@gmail.com
swap_relation_files() calls toast_get_valid_index() to find and lock
this index, just before swapping with the rebuilt TOAST index. The
latter function releases the lock before returning. Potential for
mischief is low; a concurrent session can issue ALTER INDEX ... SET
(fillfactor = ...), which is not alarming. Nonetheless, changing
pg_class.relfilenode without a lock is unconventional. Back-patch to
9.5 (all supported versions), because another fix needs this.
Discussion: https://postgr.es/m/20191226001521.GA1772687@rfd.leadboat.com
Remove an obsolete comment from AtEOXact_cleanup(). Restore formatting
of a comment in struct RelationData, mangled by the pgindent run in
commit 9af4159fce. Back-patch to 9.5 (all
supported versions), because another fix stacks on this.
