The test would fail in an environment including a certificate file in
~/.postgresql/. bdd6e9b fixed a similar failure, and d6e612f introduced
the same problem again with a new test.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200804.120033.31225582282178001.horikyota.ntt@gmail.com
Backpatch-through: 13
001_ssltests.pl and 002_scram.pl both generated an extra file for a
client key used in the tests that were not removed. In Debian, this
causes repeated builds to fail.
The code refactoring done in 4dc6355 broke the cleanup done in
001_ssltests.pl, and the new tests added in 002_scram.pl via d6e612f
forgot the removal of one file. While on it, fix a second issue
introduced in 002_scram.pl where we use the same file name in 001 and
002 for the temporary client key whose permissions are changed in the
test, as using the same file name in both tests could cause failures
with parallel jobs of src/test/ssl/ if one test removes a file still
needed by the second test.
Reported-by: Felix Lechner
Author: Daniel Gustafsson, Felix Lechner
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAFHYt543sjX=Cm_aEeoejStyP47C+Y3+Wh6WbirLXsgUMaw7iw@mail.gmail.com
Backpatch-through: 13
Instead of hard-wiring the netmask as /32, allow it to be specified
where we specify the server address. This will ease changing the
test to use IPv6, when/if somebody wants to do that.
Also remove the hard-wired pg_hba.conf entries for IPv6 (::1/128).
These have never had any usefulness, because the client side
of the tests has always explicitly connected to $SERVERHOSTADDR
which has always been set to IPv4 (127.0.0.1). All they accomplish
is to break the test on non-IPv6-supporting hosts, and besides
that they violate the express intent of the code to minimize the
server's range of allowed connections.
This could be back-patched, perhaps, but for now I don't see
a need to.
Discussion: https://postgr.es/m/1899.1578356089@sss.pgh.pa.us
When compiling Postgres with OpenSSL 1.0.1 or older versions, SCRAM's
channel binding cannot be supported as X509_get_signature_nid() is
needed, which causes a regression test with channel_binding='require' to
fail as the server cannot publish SCRAM-SHA-256-PLUS as SASL mechanism
over an SSL connection.
Fix the issue by using a method similar to c3d41cc, making the test
result conditional. The test passes if X509_get_signature_nid() is
present, and when missing we test for a connection failure. Testing a
connection failure is more useful than skipping the test as we should
fail the connection if channel binding is required by the client but the
server does not support it.
Reported-by: Tom Lane, Michael Paquier
Author: Michael Paquier
Discussion: https://postgr.es/m/20190927024457.GA8485@paquier.xyz
Discussion: https://postgr.es/m/24857.1569775891@sss.pgh.pa.us
The modules RewindTest.pm and ServerSetup.pm are really only useful for
TAP tests, so they really belong in the TAP test directories. In
addition, ServerSetup.pm is renamed to SSLServer.pm.
The test scripts have their own directories added to the search path so
that the relocated modules will be found, regardless of where the tests
are run from, even on modern perl where "." is no longer in the
searchpath.
Discussion: https://postgr.es/m/e4b0f366-269c-73c3-9c90-d9cb0f4db1f9@2ndQuadrant.com
Backpatch as appropriate to 9.5
Someone running these test could have key or certificate files in
their ~/.postgresql/, which would interfere with the tests. The way
to override that is to specify sslcert=invalid and/or
sslrootcert=invalid if no actual certificate is used for a particular
test. Document that and fix up one test that had a risk of failing in
these circumstances.
Discussion: https://www.postgresql.org/message-id/flat/398754d8-6bb5-c5cf-e7b8-22e5f0983caf@2ndquadrant.com/
There are some problems with the tls-unique channel binding type. It's not
supported by all SSL libraries, and strictly speaking it's not defined for
TLS 1.3 at all, even though at least in OpenSSL, the functions used for it
still seem to work with TLS 1.3 connections. And since we had no
mechanism to negotiate what channel binding type to use, there would be
awkward interoperability issues if a server only supported some channel
binding types. tls-server-end-point seems feasible to support with any SSL
library, so let's just stick to that.
This removes the scram_channel_binding libpq option altogether, since there
is now only one supported channel binding type.
This also removes all the channel binding tests from the SSL test suite.
They were really just testing the scram_channel_binding option, which
is now gone. Channel binding is used if both client and server support it,
so it is used in the existing tests. It would be good to have some tests
specifically for channel binding, to make sure it really is used, and the
different combinations of a client and a server that support or doesn't
support it. The current set of settings we have make it hard to write such
tests, but I did test those things manually, by disabling
HAVE_BE_TLS_GET_CERTIFICATE_HASH and/or
HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH.
I also removed the SCRAM_CHANNEL_BINDING_TLS_END_POINT constant. This is a
matter of taste, but IMO it's more readable to just use the
"tls-server-end-point" string.
Refactor the checks on whether the SSL library supports the functions
needed for tls-server-end-point channel binding. Now the server won't
advertise, and the client won't choose, the SCRAM-SHA-256-PLUS variant, if
compiled with an OpenSSL version too old to support it.
In the passing, add some sanity checks to check that the chosen SASL
mechanism, SCRAM-SHA-256 or SCRAM-SHA-256-PLUS, matches whether the SCRAM
exchange used channel binding or not. For example, if the client selects
the non-channel-binding variant SCRAM-SHA-256, but in the SCRAM message
uses channel binding anyway. It's harmless from a security point of view,
I believe, and I'm not sure if there are some other conditions that would
cause the connection to fail, but it seems better to be strict about these
things and check explicitly.
Discussion: https://www.postgresql.org/message-id/ec787074-2305-c6f4-86aa-6902f98485a4%40iki.fi
The branch that does not support tls-server-end-point runs more tests,
so we need to structure the test counting dynamically.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Add checks in each test file that the build supports the feature,
otherwise skip all the tests. Before, if someone were to (accidentally)
invoke these tests without build support, they would fail in confusing
ways.
based on patch from Michael Paquier <michael@paquier.xyz>
In tests that check whether a connection fails, also check the error
message. That makes sure that the connection was rejected for the right
reason.
This discovered that two tests had their connection failing for the
wrong reason. One test failed because pg_hba.conf was not set up to
allow that user, one test failed because the client key file did not
have the right permissions. Fix those tests and add a new one that is
really supposed to check the file permission issue.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Add a function to TestLib that allows us to check pg_config.h and then
decide the expected test outcome based on that.
Author: Michael Paquier <michael.paquier@gmail.com>
This adds a second standard channel binding type for SCRAM. It is
mainly intended for third-party clients that cannot implement
tls-unique, for example JDBC.
Author: Michael Paquier <michael.paquier@gmail.com>
This parameter can be used to enforce the channel binding type used
during a SCRAM authentication. This can be useful to check code paths
where an invalid channel binding type is used by a client and will be
even more useful to allow testing other channel binding types when they
are added.
The default value is tls-unique, which is what RFC 5802 specifies.
Clients can optionally specify an empty value, which has as effect to
not use channel binding and use SCRAM-SHA-256 as chosen SASL mechanism.
More tests for SCRAM and channel binding are added to the SSL test
suite.
Author: Author: Michael Paquier <michael.paquier@gmail.com>
This is the basic feature set using OpenSSL to support the feature. In
order to allow the frontend and the backend to fetch the sent and
expected TLS Finished messages, a PG-like API is added to be able to
make the interface pluggable for other SSL implementations.
This commit also adds a infrastructure to facilitate the addition of
future channel binding types as well as libpq parameters to control the
SASL mechanism names and channel binding names. Those will be added by
upcoming commits.
Some tests are added to the SSL test suite to test SCRAM authentication
with channel binding.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
