This patch merges the responsibility for NOT-flattening into
eval_const_expressions' processing. It wasn't done that way originally
because prepqual.c is far older than eval_const_expressions. But putting
this work into eval_const_expressions saves one pass over the qual trees,
and in fact saves even more than that because we can exploit the knowledge
that the subexpressions have already been recursively simplified. Doing it
this way also lets us do it uniformly over all expressions, whereas
prepqual.c formerly just did it at top level to save cycles. That should
improve the planner's ability to recognize logically-equivalent constructs.
While at it, also add the ability to fold a NOT into BooleanTest and
NullTest constructs (the latter only for the scalar-datatype case).
Per discussion of bug #5702.
The point of a PlaceHolderVar is to allow a non-strict expression to be
evaluated below an outer join, after which its value bubbles up like a Var
and can be forced to NULL when the outer join's semantics require that.
However, there was a serious design oversight in that, namely that we
didn't ensure that there was actually a correct place in the plan tree
to evaluate the placeholder :-(. It may be necessary to delay evaluation
of an outer join to ensure that a placeholder that should be evaluated
below the join can be evaluated there. Per recent bug report from Kirill
Simonov.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
In these cases a qual can get marked with the removable rel in its
required_relids, but this is just to schedule its evaluation correctly, not
because it really depends on the rel. We were assuming that, in effect,
we could throw away *all* quals so marked, which is nonsense. Tighten up
the logic to be a little more paranoid about which quals belong to the
outer join being considered for removal, and arrange for all quals that
don't belong to be updated so they will still get evaluated correctly.
Also fix another problem that happened to be exposed by this test case,
which was that make_join_rel() was failing to notice some cases where
a constant-false qual could be used to prove a join relation empty. If it's
a pushed-down constant false, then the relation is empty even if it's an
outer join, because the qual applies after the outer join expansion.
Per report from Nathan Grange. Back-patch into 9.0.
relation using the general PARAM_EXEC executor parameter mechanism, rather
than the ad-hoc kluge of passing the outer tuple down through ExecReScan.
The previous method was hard to understand and could never be extended to
handle parameters coming from multiple join levels. This patch doesn't
change the set of possible plans nor have any significant performance effect,
but it's necessary infrastructure for future generalization of the concept
of an inner indexscan plan.
ExecReScan's second parameter is now unused, so it's removed.
The logic for determining whether to materialize has been significantly
overhauled for 9.0. In case there should be any doubt about whether
materialization is a win in any particular case, this should provide a
convenient way of seeing what happens without it; but even with enable_material
turned off, we still materialize in cases where it is required for
correctness.
Thanks to Tom Lane for the review.
This patch allows the frame to start from CURRENT ROW (in either RANGE or
ROWS mode), and it also adds support for ROWS n PRECEDING and ROWS n FOLLOWING
start and end points. (RANGE value PRECEDING/FOLLOWING isn't there yet ---
the grammar works, but that's all.)
Hitoshi Harada, reviewed by Pavel Stehule
parse analysis phase, rather than at execution time. This makes parameter
handling work the same as it does in ordinary plannable queries, and in
particular fixes the incompatibility that Pavel pointed out with plpgsql's
new handling of variable references. plancache.c gets a little bit
grottier, but the alternatives seem worse.
to be just a minor extension of the previous patch that made "x IS NULL"
indexable, because we can treat the IS NOT NULL condition as if it were
"x < NULL" or "x > NULL" (depending on the index's NULLS FIRST/LAST option),
just like IS NULL is treated like "x = NULL". Aside from any possible
usefulness in its own right, this is an important improvement for
index-optimized MAX/MIN aggregates: it is now reliably possible to get
a column's min or max value cheaply, even when there are a lot of nulls
cluttering the interesting end of the index.
non-kluge method for controlling the order in which values are fed to an
aggregate function. At the same time eliminate the old implementation
restriction that DISTINCT was only supported for single-argument aggregates.
Possibly release-notable behavioral change: formerly, agg(DISTINCT x)
dropped null values of x unconditionally. Now, it does so only if the
agg transition function is strict; otherwise nulls are treated as DISTINCT
normally would, ie, you get one copy.
Andrew Gierth, reviewed by Hitoshi Harada
by adding a requirement that build_join_rel add new join RelOptInfos to the
appropriate list immediately at creation. Per report from Robert Haas,
the list_concat_unique_ptr() calls that this change eliminates were taking
the lion's share of the runtime in larger join problems. This doesn't do
anything to fix the fundamental combinatorial explosion in large join
problems, but it should push out the threshold of pain a bit further.
Note: because this changes the order in which joinrel lists are built,
it might result in changes in selected plans in cases where different
alternatives have exactly the same costs. There is one example in the
regression tests.
mergejoin to shield it from doing mark/restore and refetches. Put an explicit
flag in MergePath so we can centralize the logic that knows about this,
and add costing logic that considers using Materialize even when it's not
forced by the previously-existing considerations. This is in response to
a discussion back in August that suggested that materializing an inner
indexscan can be helpful when the refetch percentage is high enough.
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
is unique and is not referenced above the join. In this case the inner
side doesn't affect the query result and can be thrown away entirely.
Although perhaps nobody would ever write such a thing by hand, it's
a reasonably common case in machine-generated SQL.
The current implementation only recognizes the case where the inner side
is a simple relation with a unique index matching the query conditions.
This is enough for the use-cases that have been shown so far, but we
might want to try to handle other cases later.
Robert Haas, somewhat rewritten by Tom
an explicit model of rescan costs being different from first-time costs.
The costing of Material nodes in particular now has some visible relationship
to the actual runtime behavior, where before it was essentially fantasy.
This also fixes up a couple of places where different materialized plan types
were treated differently for no very good reason (probably just oversights).
A couple of the regression tests are affected, because the planner now chooses
to put the other relation on the inside of a nestloop-with-materialize.
So far as I can see both changes are sane, and the planner is now more
consistently following the expectation that it should prefer to materialize
the smaller of two relations.
Per a recent discussion with Robert Haas.
random number seed each time. This is how it used to work years ago, but
we got rid of the seed reset because it was resetting the main random()
sequence and thus having undesirable effects on the rest of the system.
To fix, establish a private random number state for each execution of
geqo(), and initialize the state using the new GUC variable geqo_seed.
People who want to experiment with different random searches can do so
by changing geqo_seed, but you'll always get the same plan for the same
value of geqo_seed (if holding all other planner inputs constant, of course).
The new state is kept in PlannerInfo by adding a "void *" field reserved
for use by join_search hooks. Most of the rather bulky code changes in
this commit are just arranging to pass PlannerInfo around to all the GEQO
functions (many of which formerly didn't receive it).
Andres Freund, with some editorialization by Tom
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
substituting a child rel's output expressions into the appendrel's restriction
clauses yields a pseudoconstant restriction. We might be able to skip scanning
that child rel entirely (if we get constant FALSE), or generate a one-time
filter. 8.3 more or less accidentally generated plans that weren't completely
stupid in these cases, but that was only because an extra recursive level of
subquery_planner() always occurred and allowed const-simplification to happen.
8.4's ability to pull up appendrel members with non-Var outputs exposes the
fact that we need to work harder here. Per gripe from Sergey Burladyan.
find_inheritance_children() and find_all_inheritors(). I got annoyed that
these are buried inside the planner but mostly used elsewhere. So, create
a new file catalog/pg_inherits.c and put them there, along with a couple
of other functions that search pg_inherits.
The code that modifies pg_inherits is (still) in tablecmds.c --- it's
kind of entangled with unrelated code that modifies pg_depend and other
stuff, so pulling it out seemed like a bigger change than I wanted to make
right now. But this file provides a natural home for it if anyone ever
gets around to that.
This commit just moves code around; it doesn't change anything, except
I succumbed to the temptation to make a couple of trivial optimizations
in typeInheritsFrom().
joins a bit better, ie, understand the differing cost functions for matched
and unmatched outer tuples. There is more that could be done in cost_hashjoin
but this already helps a great deal. Per discussions with Robert Haas.
PlaceHolderVar nodes in join quals appearing in or below the lowest
outer join that could null the subquery being pulled up. This improves
the planner's ability to recognize constant join quals, and probably
helps with detection of common sort keys (equivalence classes) as well.
Stefan Kaltenbrunner. The most reasonable behavior (at least for the near
term) seems to be to ignore the PlaceHolderVar and examine its argument
instead. In support of this, change the API of pull_var_clause() to allow
callers to request recursion into PlaceHolderVars. Currently
estimate_num_groups() is the only customer for that behavior, but where
there's one there may be others.
constants through full joins, as in
select * from tenk1 a full join tenk1 b using (unique1)
where unique1 = 42;
which should generate a fairly cheap plan where we apply the constraint
unique1 = 42 in each relation scan. This had been broken by my patch of
2008-06-27, which is now reverted in favor of a more invasive but hopefully
less incorrect approach. That patch was meant to prevent incorrect extraction
of OR'd indexclauses from OR conditions above an outer join. To do that
correctly we need more information than the outerjoin_delay flag can provide,
so add a nullable_relids field to RestrictInfo that records exactly which
relations are nulled by outer joins that are underneath a particular qual
clause. A side benefit is that we can make the test in create_or_index_quals
more specific: it is now smart enough to extract an OR'd indexclause into the
outer side of an outer join, even though it must not do so in the inner side.
The old coding couldn't distinguish these cases so it could not do either.
making pull_up_sublinks() construct a full-blown JoinExpr tree representation
of IN/EXISTS SubLinks that it is able to convert to semi or anti joins.
This makes pull_up_sublinks() a shade more complex, but the gain in semantic
clarity is worth it. I still have more to do in this area to address the
previously-discussed problems, but this commit in itself fixes at least one
bug in HEAD, as shown by added regression test case.
that are set up for execution with ExecPrepareExpr rather than going through
the full planner process. By introducing an explicit notion of "expression
planning", this patch also lays a bit of groundwork for maybe someday
allowing sub-selects in standalone expressions.
the default. This setting enables constraint exclusion checks only for
appendrel members (ie, inheritance children and UNION ALL arms), which are
the cases in which constraint exclusion is most likely to be useful. Avoiding
the overhead for simple queries that are unlikely to benefit should bring
the cost down to the point where this is a reasonable default setting.
Per today's discussion.
patch. This includes the ability to force the frame to cover the whole
partition, and the ability to make the frame end exactly on the current row
rather than its last ORDER BY peer. Supporting any more of the full SQL
frame-clause syntax will require nontrivial hacking on the window aggregate
code, so it'll have to wait for 8.5 or beyond.
we extended the appendrel mechanism to support UNION ALL optimization. The
reason nobody noticed was that we are not actually using attr_needed data for
appendrel children; hence it seems more reasonable to rip it out than fix it.
Back-patch to 8.2 because an Assert failure is possible in corner cases.
Per examination of an example from Jim Nasby.
In HEAD, also get rid of AppendRelInfo.col_mappings, which is quite inadequate
to represent UNION ALL situations; depend entirely on translated_vars instead.
that represent some expression that we desire to compute below the top level
of the plan, and then let that value "bubble up" as though it were a plain
Var (ie, a column value).
The immediate application is to allow sub-selects to be flattened even when
they are below an outer join and have non-nullable output expressions.
Formerly we couldn't flatten because such an expression wouldn't properly
go to NULL when evaluated above the outer join. Now, we wrap it in a
PlaceHolderVar and arrange for the actual evaluation to occur below the outer
join. When the resulting Var bubbles up through the join, it will be set to
NULL if necessary, yielding the correct results. This fixes a planner
limitation that's existed since 7.1.
In future we might want to use this mechanism to re-introduce some form of
Hellerstein's "expensive functions" optimization, ie place the evaluation of
an expensive function at the most suitable point in the plan tree.
implementation uses an in-memory hash table, so it will poop out for very
large recursive results ... but the performance characteristics of a
sort-based implementation would be pretty unpleasant too.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
when user-defined functions used in a plan are modified. Also invalidate
plans when schemas, operators, or operator classes are modified; but for these
cases we just invalidate everything rather than tracking exact dependencies,
since these types of objects seldom change in a production database.
Tom Lane; loosely based on a patch by Martin Pihlak.
into nodes/nodeFuncs, so as to reduce wanton cross-subsystem #includes inside
the backend. There's probably more that should be done along this line,
but this is a start anyway.
subqueries into the same thing you'd have gotten from IN (except always with
unknownEqFalse = true, so as to get the proper semantics for an EXISTS).
I believe this fixes the last case within CVS HEAD in which an EXISTS could
give worse performance than an equivalent IN subquery.
The tricky part of this is that if the upper query probes the EXISTS for only
a few rows, the hashing implementation can actually be worse than the default,
and therefore we need to make a cost-based decision about which way to use.
But at the time when the planner generates plans for subqueries, it doesn't
really know how many times the subquery will be executed. The least invasive
solution seems to be to generate both plans and postpone the choice until
execution. Therefore, in a query that has been optimized this way, EXPLAIN
will show two subplans for the EXISTS, of which only one will actually get
executed.
There is a lot more that could be done based on this infrastructure: in
particular it's interesting to consider switching to the hash plan if we start
out using the non-hashed plan but find a lot more upper rows going by than we
expected. I have therefore left some minor inefficiencies in place, such as
initializing both subplans even though we will currently only use one.
level of a JOIN/ON clause, not only at top level of WHERE. (However, we
can't do this in an outer join's ON clause, unless the ANY/EXISTS refers
only to the nullable side of the outer join, so that it can effectively
be pushed down into the nullable side.) Per request from Kevin Grittner.
In passing, fix a bug in the initial implementation of EXISTS pullup:
it would Assert if the EXIST's WHERE clause used a join alias variable.
Since we haven't yet flattened join aliases when this transformation
happens, it's necessary to include join relids in the computed set of
RHS relids.
and anti joins. To do this, pass the SpecialJoinInfo struct for the current
join as an additional optional argument to operator join selectivity
estimation functions. This allows the estimator to tell not only what kind
of join is being formed, but which variable is on which side of the join;
a requirement long recognized but not dealt with till now. This also leaves
the door open for future improvements in the estimators, such as accounting
for the null-insertion effects of lower outer joins. I didn't do anything
about that in the current patch but the information is in principle deducible
from what's passed.
The patch also clarifies the definition of join selectivity for semi/anti
joins: it's the fraction of the left input that has (at least one) match
in the right input. This allows getting rid of some very fuzzy thinking
that I had committed in the original 7.4-era IN-optimization patch.
There's probably room to estimate this better than the present patch does,
but at least we know what to estimate.
Since I had to touch CREATE OPERATOR anyway to allow a variant signature
for join estimator functions, I took the opportunity to add a couple of
additional checks that were missing, per my recent message to -hackers:
* Check that estimator functions return float8;
* Require execute permission at the time of CREATE OPERATOR on the
operator's function as well as the estimator functions;
* Require ownership of any pre-existing operator that's modified by
the command.
I also moved the lookup of the functions out of OperatorCreate() and
into operatorcmds.c, since that seemed more consistent with most of
the other catalog object creation processes, eg CREATE TYPE.
the old JOIN_IN code, but antijoins are new functionality.) Teach the planner
to convert appropriate EXISTS and NOT EXISTS subqueries into semi and anti
joins respectively. Also, LEFT JOINs with suitable upper-level IS NULL
filters are recognized as being anti joins. Unify the InClauseInfo and
OuterJoinInfo infrastructure into "SpecialJoinInfo". With that change,
it becomes possible to associate a SpecialJoinInfo with every join attempt,
which permits some cleanup of join selectivity estimation. That needs to be
taken much further than this patch does, but the next step is to change the
API for oprjoin selectivity functions, which seems like material for a
separate patch. So for the moment the output size estimates for semi and
especially anti joins are quite bogus.
hashtable entries for tuples that are found only in the second input: they
can never contribute to the output. Furthermore, this implies that the
planner should endeavor to put first the smaller (in number of groups) input
relation for an INTERSECT. Implement that, and upgrade prepunion's estimation
of the number of rows returned by setops so that there's some amount of sanity
in the estimate of which one is smaller.
This completes my project of improving usage of hashing for duplicate
elimination (aggregate functions with DISTINCT remain undone, but that's
for some other day).
As with the previous patches, this means we can INTERSECT/EXCEPT on datatypes
that can hash but not sort, and it means that INTERSECT/EXCEPT without ORDER
BY are no longer certain to produce sorted output.
