item, if the page containing the current item is split while the indexscan
is stopped and holds no read-lock on the page. The current item might
move right onto a page that the indexscan holds no pin on. In the prior
code this would allow btbulkdelete to reach and possibly delete the item,
causing 'my bits moved right off the end of the world!' when the indexscan
finally resumes. Fix by chaining read-locks to the right during
_bt_restscan and requiring btbulkdelete to LockBufferForCleanup on every
page it scans, not only those with deletable items. Per my pghackers
message of 25-May-02. (Too bad no one could think of a better way.)
offset past the last-used-item-plus-one, since that would result in
leaving uninitialized holes in the item pointer array. AFAICT the only
place that was depending on this was btree index build, which was being
cavalier about when to fill in the P_HIKEY pointer; easily fixed.
Also a small performance improvement: shuffle itemid's by means of
memmove, not a one-at-a-time loop.
The local buffer manager is no longer used for newly-created relations
(unless they are TEMP); a new non-TEMP relation goes through the shared
bufmgr and thus will participate normally in checkpoints. But TEMP relations
use the local buffer manager throughout their lifespan. Also, operations
in TEMP relations are not logged in WAL, thus improving performance.
Since it's no longer necessary to fsync relations as they move out of the
local buffers into shared buffers, quite a lot of smgr.c/md.c/fd.c code
is no longer needed and has been removed: there's no concept of a dirty
relation anymore in md.c/fd.c, and we never fsync anything but WAL.
Still TODO: improve local buffer management algorithms so that it would
be reasonable to increase NLocBuffer.
all places, where pd_linp is accessed. Also introduce new macros
SizeOfPageHeaderData and BTMaxItemSize. This is just source code
cosmetic, no behaviour changed.
Manfred Koizar
transaction, so as to avoid returning them out of the index AM. Saves
repeated heap_fetch operations on frequently-updated rows. Also detect
queries on unique keys (equality to all columns of a unique index), and
don't bother continuing scan once we have found first match.
Killing is implemented in the btree and hash AMs, but not yet in rtree
or gist, because there isn't an equally convenient place to do it in
those AMs (the outer amgetnext routine can't do it without re-pinning
the index page).
Did some small cleanup on APIs of HeapTupleSatisfies, heap_fetch, and
index_insert to make this a little easier.
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
to prevent spreading of corruption when page header pointers are bad.
Merge PageZero into PageInit, since it was never used separately, and
remove separate memset calls used at most other PageInit call points.
Remove IndexPageCleanup, which wasn't used at all.
to insert the same key into a supposedly unique index. The bug is of
low probability, and may not explain any of the recent reports of
duplicated rows; but a bug is a bug.
where rightmost index page splits while we are waiting to obtain exclusive
lock on it. Not clear this would actually hurt (probably the callback
would always fail), but better safe than sorry.
Also, improve comments describing concurrency considerations in this code.
lookup info in the relcache for index access method support functions.
This makes a huge difference for dynamically loaded support functions,
and should save a few cycles even for built-in ones. Also tweak dfmgr.c
so that load_external_function is called only once, not twice, when
doing fmgr_info for a dynamically loaded function. All per performance
gripe from Teodor Sigaev, 5-Oct-01.
rightmost on its tree level, we split 2/3 to the left and 1/3 to the
new right page, rather than the even split we use elsewhere. The idea
is that when faced with a steadily increasing series of inserted keys
(such as sequence or timestamp values), we'll end up with a btree that's
about 2/3ds full not 1/2 full, which is much closer to the desired
steady-state load for a btree. Per suggestion from Ann Harrison of
IBPhoenix.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
give consistent results for all datatypes. Types float4, float8, and
numeric were broken for NaN values; abstime, timestamp, and interval
were broken for INVALID values; timetz was just plain broken (some
possible pairs of values were neither < nor = nor >). Also clean up
text, bpchar, varchar, and bit/varbit to eliminate duplicate code and
thereby reduce the probability of similar inconsistencies arising in
the future.
allocated by plan nodes are not leaked at end of query. This doesn't
really matter for normal queries, but it sure does for queries invoked
repetitively inside SQL functions. Clean up some other grotty code
associated with tupdescs, and fix a few other memory leaks exposed by
tests with simple SQL functions.
and new root page if old root one was splitted but new root page
wasn't created.
New code is protected by FixBTree bool flag setted to FALSE, so
nothing should be affected by this untested approach.
are treated more like 'cancel' interrupts: the signal handler sets a
flag that is examined at well-defined spots, rather than trying to cope
with an interrupt that might happen anywhere. See pghackers discussion
of 1/12/01.
are now critical sections, so as to ensure die() won't interrupt us while
we are munging shared-memory data structures. Avoid insecure intermediate
states in some code that proc_exit will call, like palloc/pfree. Rename
START/END_CRIT_CODE to START/END_CRIT_SECTION, since that seems to be
what people tend to call them anyway, and make them be called with () like
a function call, in hopes of not confusing pg_indent.
I doubt that this is sufficient to make SIGTERM safe anywhere; there's
just too much code that could get invoked during proc_exit().
included by everything that includes bufmgr.h --- it's supposed to be
internals, after all, not part of the API! This fixes the conflict
against FreeBSD headers reported by Rosenman, by making it unnecessary
for s_lock.h to be included by plperl.c.
