This was mostly confusing, especially since some wait events in
this class had the suffix and some did not.
While at it, stop exposing MainLWLockNames[] as a globally visible
name; any code using that directly is almost certainly wrong, as
its name has been misleading for some time.
(GetLWLockIdentifier() is what to use instead.)
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Choose names that fit into the conventions for wait event names
(particularly, that multi-word names are in the style MultiWordName)
and hopefully convey more information to non-hacker users than the
previous names did.
Also rename SerializablePredicateLockListLock to
SerializablePredicateListLock; the old name was long enough to cause
table formatting problems, plus the double occurrence of "Lock" seems
confusing/error-prone.
Also change a couple of particularly opaque LWLock field names.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
There is little point in using the LWLockRegisterTranche mechanism for
built-in tranche names. It wastes cycles, it creates opportunities for
bugs (since failing to register a tranche name is a very hard-to-detect
problem), and the lack of any centralized list of names encourages
sloppy nonconformity in name choices. Moreover, since we have a
centralized list of the tranches anyway in enum BuiltinTrancheIds, we're
certainly not buying any flexibility in return for these disadvantages.
Hence, nuke all the backend-internal LWLockRegisterTranche calls,
and instead provide a const array of the builtin tranche names.
(I have in mind to change a bunch of these names shortly, but this
patch is just about getting them into one place.)
Discussion: https://postgr.es/m/9056.1589419765@sss.pgh.pa.us
Commit 3eb77eba5a moved the loop and refactored it, and inadvertently
changed the effect of fsync=off so that it also skipped removing entries
from the pendingOps table. That was not intentional, and leads to an
assertion failure if you turn fsync on while the server is running and
reload the config.
Backpatch-through: 12-
Reviewed-By: Thomas Munro
Discussion: https://www.postgresql.org/message-id/3cbc7f4b-a5fa-56e9-9591-c886deb07513%40iki.fi
0f5ca02f53 introduces 3 new keywords. It appears to be too much for relatively
small feature. Given now we past feature freeze, it's already late for
discussion of the new syntax. So, revert.
Discussion: https://postgr.es/m/28209.1586294824%40sss.pgh.pa.us
Provide PrefetchSharedBuffer(), a variant that takes SMgrRelation, for
use in recovery. Rename LocalPrefetchBuffer() to PrefetchLocalBuffer()
for consistency.
Add a return value to all of these. In recovery, tolerate and report
missing files, so we can handle relations unlinked before crash recovery
began. Also report cache hits and misses, so that callers can do faster
buffer lookups and better I/O accounting.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
The goal of separating hotly accessed per-backend data from PGPROC
into PGXACT is to make accesses fast (GetSnapshotData() in
particular). But delayChkpt is not actually accessed frequently; only
when starting a checkpoint. As it is frequently modified (multiple
times in the course of a single transaction), storing it in the same
cacheline as hotly accessed data unnecessarily dirties a contended
cacheline.
Therefore move delayChkpt to PGPROC.
This is part of a larger series of patches intending to improve
GetSnapshotData() scalability. It is committed and pushed separately,
as it is independently beneficial (small but measurable win, limited
by the other frequent modifications of PGXACT).
Author: Andres Freund
Reviewed-By: Robert Haas, Thomas Munro, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
This commit adds following optional clause to BEGIN and START TRANSACTION
commands.
WAIT FOR LSN lsn [ TIMEOUT timeout ]
New clause pospones transaction start till given lsn is applied on standby.
This clause allows user be sure, that changes previously made on primary would
be visible on standby.
New shared memory struct is used to track awaited lsn per backend. Recovery
process wakes up backend once required lsn is applied.
Author: Ivan Kartyshov, Anna Akenteva
Reviewed-by: Craig Ringer, Thomas Munro, Robert Haas, Kyotaro Horiguchi
Reviewed-by: Masahiko Sawada, Ants Aasma, Dmitry Ivanov, Simon Riggs
Reviewed-by: Amit Kapila, Alexander Korotkov
Discussion: https://postgr.es/m/0240c26c-9f84-30ea-fca9-93ab2df5f305%40postgrespro.ru
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This commit introduces new wait events RecoveryConflictSnapshot and
RecoveryConflictTablespace. The former is reported while waiting for
recovery conflict resolution on a vacuum cleanup. The latter is reported
while waiting for recovery conflict resolution on dropping tablespace.
Also this commit changes the code so that the wait event Lock is reported
while waiting in ResolveRecoveryConflictWithVirtualXIDs() for recovery
conflict resolution on a lock. Basically the wait event Lock is reported
during that wait, but previously was not reported only when that wait
happened in ResolveRecoveryConflictWithVirtualXIDs().
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
Previously while the startup process was waiting for the recovery conflict
with snapshot, tablespace or lock to be resolved, waiting was reported in
PS display, but not in the case of recovery conflict with buffer pin.
This commit makes the startup process in hot standby report waiting via PS
while waiting for the conflicts with other backends holding buffer pins to
be resolved.
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
The correspondence of settings between primary and standby is required
because those settings influence certain shared memory sizings that
are required for processing WAL records that the primary might send.
For example, if the primary sends a prepared transaction, the standby
must have had max_prepared_transaction set appropriately or it won't
be able to process those WAL records.
However, fatally shutting down the standby immediately upon receipt of
the parameter change record might be a bit of an overreaction. The
resources related to those settings are not required immediately at
that point, and might never be required if the activity on the primary
does not exhaust all those resources. If we just let the standby roll
on with recovery, it will eventually produce an appropriate error when
those resources are used.
So this patch relaxes this a bit. Upon receipt of
XLOG_PARAMETER_CHANGE, we still check the settings but only issue a
warning and set a global flag if there is a problem. Then when we
actually hit the resource issue and the flag was set, we issue another
warning message with relevant information. At that point we pause
recovery, so a hot standby remains usable. We also repeat the last
warning message once a minute so it is harder to miss or ignore.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
This reverts the parts of commit 17a28b03645e27d73bf69a95d7569b61e58f06eb
that changed ereport's auxiliary functions from returning dummy integer
values to returning void. It turns out that a minority of compilers
complain (not entirely unreasonably) about constructs such as
(condition) ? errdetail(...) : 0
if errdetail() returns void rather than int. We could update those
call sites to say "(void) 0" perhaps, but the expectation for this
patch set was that ereport callers would not have to change anything.
And this aspect of the patch set was already the most invasive and
least compelling part of it, so let's just drop it.
Per buildfarm.
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
Change all the auxiliary error-reporting routines to return void,
now that we no longer need to pretend they are passing something
useful to errfinish(). While this probably doesn't save anything
significant at the machine-code level, it allows detection of some
additional types of mistakes.
Pass the error location details (__FILE__, __LINE__, PG_FUNCNAME_MACRO)
to errfinish not errstart. This shaves a few cycles off the case where
errstart decides we're not going to emit anything.
Re-implement elog() as a trivial wrapper around ereport(), removing
the separate support infrastructure it used to have. Aside from
getting rid of some now-surplus code, this means that elog() now
really does have exactly the same semantics as ereport(), in particular
that it can skip evaluation work if the message is not to be emitted.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
This reverts commit cb2fd7eac285b1b0a24eeb2b8ed4456b66c5a09f. Per
numerous buildfarm members, it was incompatible with parallel query, and
a test case assumed LP64. Back-patch to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20200321224920.GB1763544@rfd.leadboat.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This is required as it is no safer for two related processes to perform
clean up in gin indexes at a time than for unrelated processes to do the
same. After acquiring page locks, we can acquire relation extension lock
but reverse never happens which means these will also not participate in
deadlock. So, avoid checking wait edges from this lock.
Currently, the parallel mode is strictly read-only, but after this patch
we have the infrastructure to allow parallel inserts and parallel copy.
Author: Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Sawada Masahiko
Discussion: https://postgr.es/m/CAD21AoCmT3cFQUN4aVvzy5chw7DuzXrJCbrjTU05B+Ss=Gn1LA@mail.gmail.com
This is required as it is no safer for two related processes to extend the
same relation at a time than for unrelated processes to do the same. We
don't acquire a heavyweight lock on any other object after relation
extension lock which means such a lock can never participate in the
deadlock cycle. So, avoid checking wait edges from this lock.
This provides an infrastructure to allow parallel operations like insert,
copy, etc. which were earlier not possible as parallel group members won't
conflict for relation extension lock.
Author: Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Sawada Masahiko
Discussion: https://postgr.es/m/CAD21AoCmT3cFQUN4aVvzy5chw7DuzXrJCbrjTU05B+Ss=Gn1LA@mail.gmail.com
Assert that we don't acquire any other heavyweight lock while holding the
page lock except for relation extension. However, these locks are never
taken in reverse order which implies that page locks will never
participate in the deadlock cycle.
Similar to relation extension, page locks are also held for a short
duration, so imposing such a restriction won't hurt.
Author: Dilip Kumar, with few changes by Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Sawada Masahiko
Discussion: https://postgr.es/m/CAD21AoCmT3cFQUN4aVvzy5chw7DuzXrJCbrjTU05B+Ss=Gn1LA@mail.gmail.com
relation extension lock.
The only exception to the rule is that we can try to acquire the same
relation extension lock more than once. This is allowed as we are not
creating any new lock for this case. This restriction implies that the
relation extension lock won't ever participate in the deadlock cycle
because we can never wait for any other heavyweight lock after acquiring
this lock.
Such a restriction is okay for relation extension locks as unlike other
heavyweight locks these are not held till the transaction end. These are
taken for a short duration to extend a particular relation and then
released.
Author: Dilip Kumar, with few changes by Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Sawada Masahiko
Discussion: https://postgr.es/m/CAD21AoCmT3cFQUN4aVvzy5chw7DuzXrJCbrjTU05B+Ss=Gn1LA@mail.gmail.com
For the semantics to match the epoll implementation, we need a socket to
continue to appear readable/writable if you wait multiple times without
doing I/O in between (in Linux terminology: level-triggered rather than
edge-triggered). This distinction will be important for later commits.
Similar to commit 3b790d256f8 for Windows.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
While running under a debugger, macOS's getppid() can return the
debugger's PID. That could cause a backend to exit because it falsely
believed that the postmaster had died, since commit 815c2f09.
Continue to use getppid() as a fast postmaster check after adding the
postmaster's PID to a kqueue, to close a PID-reuse race, but double
check that it actually exited by trying to read the pipe. The new check
isn't reached in the common case.
Reported-by: Alexander Korotkov <a.korotkov@postgrespro.ru>
Discussion: https://postgr.es/m/CA%2BhUKGKhAxJ8V8RVwCo6zJaeVrdOG1kFBHGZOOjf6DzW_omeMA%40mail.gmail.com
Introduce a GUC and a tablespace option to control I/O prefetching, much
like effective_io_concurrency, but for work that is done on behalf of
many client sessions.
Use the new setting in heapam.c instead of the hard-coded formula
effective_io_concurrency + 10 introduced by commit 558a9165e08. Go with
a default value of 10 for now, because it's a round number pretty close
to the value used for that existing case.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
The effective_io_concurrency GUC and equivalent tablespace option were
previously passed through a formula based on a theory about RAID
spindles and probabilities, to arrive at the number of pages to prefetch
in bitmap heap scans. Tomas Vondra, Andres Freund and others argued
that it was anachronistic and hard to justify, and commit 558a9165e08
already started down the path of bypassing it in new code. We agreed to
drop that logic and use the value directly.
For the default setting of 1, there is no change in effect. Higher
settings can be converted from the old meaning to the new with:
select round(sum(OLD / n::float)) from generate_series(1, OLD) s(n);
We might want to consider renaming the GUC before the next release given
the change in meaning, but it's not clear that many users had set it
very carefully anyway. That decision is deferred for now.
Discussion: https://postgr.es/m/CA%2BhUKGJUw08dPs_3EUcdO6M90GnjofPYrWp4YSLaBkgYwS-AqA%40mail.gmail.com
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
Previously, hard links were not used on Windows and Cygwin, but they
support them just fine in currently supported OS versions, so we can
use them there as well.
Since all supported platforms now support hard links, we can remove
the alternative code paths.
Rename durable_link_or_rename() to durable_rename_excl() to make the
purpose more clear without referencing the implementation details.
Discussion: https://www.postgresql.org/message-id/flat/72fff73f-dc9c-4ef4-83e8-d2e60c98df48%402ndquadrant.com
The need for this was removed by
8b9e9644dc6a9bd4b7a97950e6212f63880cf18b.
A number of files now need to include utils/acl.h or
parser/parse_node.h explicitly where they previously got it indirectly
somehow.
Since parser/parse_node.h already includes nodes/parsenodes.h, the
latter is then removed where the former was added. Also, remove
nodes/pg_list.h from objectaddress.h, since that's included via
nodes/parsenodes.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com
Previously "waiting" could appear twice via PS in case of lock conflict
in hot standby mode. Specifically this issue happend when the delay
in WAL application determined by max_standby_archive_delay and
max_standby_streaming_delay had passed but it took more than 500 msec
to cancel all the conflicting transactions. Especially we can observe this
easily by setting those delay parameters to -1.
The cause of this issue was that WaitOnLock() and
ResolveRecoveryConflictWithVirtualXIDs() added "waiting" to
the process title in that case. This commit prevents
ResolveRecoveryConflictWithVirtualXIDs() from reporting waiting
in case of lock conflict, to fix the bug.
Back-patch to all back branches.
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
Deduplication reduces the storage overhead of duplicates in indexes that
use the standard nbtree index access method. The deduplication process
is applied lazily, after the point where opportunistic deletion of
LP_DEAD-marked index tuples occurs. Deduplication is only applied at
the point where a leaf page split would otherwise be required. New
posting list tuples are formed by merging together existing duplicate
tuples. The physical representation of the items on an nbtree leaf page
is made more space efficient by deduplication, but the logical contents
of the page are not changed. Even unique indexes make use of
deduplication as a way of controlling bloat from duplicates whose TIDs
point to different versions of the same logical table row.
The lazy approach taken by nbtree has significant advantages over a GIN
style eager approach. Most individual inserts of index tuples have
exactly the same overhead as before. The extra overhead of
deduplication is amortized across insertions, just like the overhead of
page splits. The key space of indexes works in the same way as it has
since commit dd299df8 (the commit that made heap TID a tiebreaker
column).
Testing has shown that nbtree deduplication can generally make indexes
with about 10 or 15 tuples for each distinct key value about 2.5X - 4X
smaller, even with single column integer indexes (e.g., an index on a
referencing column that accompanies a foreign key). The final size of
single column nbtree indexes comes close to the final size of a similar
contrib/btree_gin index, at least in cases where GIN's posting list
compression isn't very effective. This can significantly improve
transaction throughput, and significantly reduce the cost of vacuuming
indexes.
A new index storage parameter (deduplicate_items) controls the use of
deduplication. The default setting is 'on', so all new B-Tree indexes
automatically use deduplication where possible. This decision will be
reviewed at the end of the Postgres 13 beta period.
There is a regression of approximately 2% of transaction throughput with
synthetic workloads that consist of append-only inserts into a table
with several non-unique indexes, where all indexes have few or no
repeated values. The underlying issue is that cycles are wasted on
unsuccessful attempts at deduplicating items in non-unique indexes.
There doesn't seem to be a way around it short of disabling
deduplication entirely. Note that deduplication of items in unique
indexes is fairly well targeted in general, which avoids the problem
there (we can use a special heuristic to trigger deduplication passes in
unique indexes, since we're specifically targeting "version bloat").
Bump XLOG_PAGE_MAGIC because xl_btree_vacuum changed.
No bump in BTREE_VERSION, since the representation of posting list
tuples works in a way that's backwards compatible with version 4 indexes
(i.e. indexes built on PostgreSQL 12). However, users must still
REINDEX a pg_upgrade'd index to use deduplication, regardless of the
Postgres version they've upgraded from. This is the only way to set the
new nbtree metapage flag indicating that deduplication is generally
safe.
Author: Anastasia Lubennikova, Peter Geoghegan
Reviewed-By: Peter Geoghegan, Heikki Linnakangas
Discussion:
https://postgr.es/m/55E4051B.7020209@postgrespro.ruhttps://postgr.es/m/4ab6e2db-bcee-f4cf-0916-3a06e6ccbb55@postgrespro.ru
The comments in fd.c have long claimed that all file allocations should
go through that module, but in reality that's not always practical.
fd.c doesn't supply APIs for invoking some FD-producing syscalls like
pipe() or epoll_create(); and the APIs it does supply for non-virtual
FDs are mostly insistent on releasing those FDs at transaction end;
and in some cases the actual open() call is in code that can't be made
to use fd.c, such as libpq.
This has led to a situation where, in a modern server, there are likely
to be seven or so long-lived FDs per backend process that are not known
to fd.c. Since NUM_RESERVED_FDS is only 10, that meant we had *very*
few spare FDs if max_files_per_process is >= the system ulimit and
fd.c had opened all the files it thought it safely could. The
contrib/postgres_fdw regression test, in particular, could easily be
made to fall over by running it under a restrictive ulimit.
To improve matters, invent functions Acquire/Reserve/ReleaseExternalFD
that allow outside callers to tell fd.c that they have or want to allocate
a FD that's not directly managed by fd.c. Add calls to track all the
fixed FDs in a standard backend session, so that we are honestly
guaranteeing that NUM_RESERVED_FDS FDs remain unused below the EMFILE
limit in a backend's idle state. The coding rules for these functions say
that there's no need to call them in code that just allocates one FD over
a fairly short interval; we can dip into NUM_RESERVED_FDS for such cases.
That means that there aren't all that many places where we need to worry.
But postgres_fdw and dblink must use this facility to account for
long-lived FDs consumed by libpq connections. There may be other places
where it's worth doing such accounting, too, but this seems like enough
to solve the immediate problem.
Internally to fd.c, "external" FDs are limited to max_safe_fds/3 FDs.
(Callers can choose to ignore this limit, but of course it's unwise
to do so except for fixed file allocations.) I also reduced the limit
on "allocated" files to max_safe_fds/3 FDs (it had been max_safe_fds/2).
Conceivably a smarter rule could be used here --- but in practice,
on reasonable systems, max_safe_fds should be large enough that this
isn't much of an issue, so KISS for now. To avoid possible regression
in the number of external or allocated files that can be opened,
increase FD_MINFREE and the lower limit on max_files_per_process a
little bit; we now insist that the effective "ulimit -n" be at least 64.
This seems like pretty clearly a bug fix, but in view of the lack of
field complaints, I'll refrain from risking a back-patch.
Discussion: https://postgr.es/m/E1izCmM-0005pV-Co@gemulon.postgresql.org
Previously PostgreSQL built with -DLWLOCK_STATS could report
more than one LWLock statistics entries for the same backend
process and the same LWLock. This is strange and only one
statistics should be output in that case, instead.
The cause of this issue is that the key variable used for
LWLock stats hash table was not fully initialized. The key
consists of two fields and they were initialized. But
the following 4 bytes allocated in the key variable for
the alignment was not initialized. So even if the same key
was specified, hash_search(HASH_ENTER) could not find
the existing entry for that key and created new one.
This commit fixes this issue by initializing the key
variable with zero. As the side effect of this commit,
the volume of LWLock statistics output would be reduced
very much.
Back-patch to v10, where commit 3761fe3c20 introduced the issue.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Kyotaro Horiguchi
Discussion: https://postgr.es/m/26359edb-798a-568f-d93a-6aafac49752d@oss.nttdata.com
Use kevent(2) to wait for events on the BSD family of operating
systems and macOS. This is similar to the epoll(2) support added
for Linux by commit 98a64d0bd.
Author: Thomas Munro
Reviewed-by: Andres Freund, Marko Tiikkaja, Tom Lane
Tested-by: Mateusz Guzik, Matteo Beccati, Keith Fiske, Heikki Linnakangas, Michael Paquier, Peter Eisentraut, Rui DeSousa, Tom Lane, Mark Wong
Discussion: https://postgr.es/m/CAEepm%3D37oF84-iXDTQ9MrGjENwVGds%2B5zTr38ca73kWR7ez_tA%40mail.gmail.com
Those new assertions can be used at file scope, outside of any function
for compilation checks. This commit provides implementations for C and
C++, and fallback implementations.
Author: Peter Smith
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Dagfinn Ilmari Mannsåker,
Michael Paquier
Discussion: https://postgr.es/m/201DD0641B056142AC8C6645EC1B5F62014B8E8030@SYD1217
If we attempt to create a DSM segment when no slots are available,
we should return the memory to the operating system. Previously
we did that if the DSM_CREATE_NULL_IF_MAXSEGMENTS flag was
passed in, but we didn't do it if an error was raised. Repair.
Back-patch to 9.4, where DSM segments arrived.
Author: Thomas Munro
Reviewed-by: Robert Haas
Reported-by: Julian Backes
Discussion: https://postgr.es/m/CA%2BhUKGKAAoEw-R4om0d2YM4eqT1eGEi6%3DQot-3ceDR-SLiWVDw%40mail.gmail.com
When running a lot of large parallel queries concurrently, or a plan with
a lot of separate Gather nodes, it is possible to run out of DSM slots.
There are better solutions to these problems requiring architectural
redesign work, but for now, let's adjust the constants so that it's more
difficult to hit the limit.
1. Previously, a DSA area would create up to four segments at each size
before doubling the size. After this commit, it will create only two at
each size, so it ramps up faster and therefore needs fewer slots.
2. Previously, the total limit on DSM slots allowed for 2 per connection.
Switch to 5 per connection.
Also remove an obsolete nearby comment.
Author: Thomas Munro
Reviewed-by: Robert Haas, Andres Freund
Discussion: https://postre.es/m/CA%2BhUKGL6H2BpGbiF7Lj6QiTjTGyTLW_vLR%3DSn2tEBeTcYXiMKw%40mail.gmail.com
