fefd9a3fed turned tail recursion of CommitTransactionCommand() and
AbortCurrentTransaction() into iteration. However, it splits the handling of
cases between different functions.
This commit puts the handling of all the cases into
AbortCurrentTransactionInternal() and CommitTransactionCommandInternal().
Now CommitTransactionCommand() and AbortCurrentTransaction() are just doing
the repeated calls of internal functions.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20240415224834.w6piwtefskoh32mv%40awork3.anarazel.de
Author: Andres Freund
In one multixact.c edge case, we need a mechanism to wait for one
multixact offset to be written before being allowed to read the next
one. We used to handle this case by sleeping for one millisecond and
retrying, but such sleeps have been reported as problematic in
production cases. We can avoid the problem by using a condition
variable: readers sleep on it and then every creator of multixacts
broadcasts into the CV when creation is sufficiently far along.
Author: Kyotaro Horiguchi <horikyotajntt@gmail.com>
Reviewed-by: Andrey Borodin <amborodin@acm.org>
Discussion: https://postgr.es/m/47A598F4-B4E7-4029-8FEC-A06A6C3CB4B5@yandex-team.ru
Discussion: https://postgr.es/m/20200515.090333.24867479329066911.horikyota.ntt
This tracks the position of WAL that's been fully copied into WAL
buffers by all processes emitting WAL. (For some reason we call that
"WAL insertion"). This is updated using atomic monotonic advance during
WaitXLogInsertionsToFinish, which is not when the insertions actually
occur, but it's the only place where we know where have all the
insertions have completed.
This value is useful in WALReadFromBuffers, which can verify that
callers don't try to read past what has been inserted. (However, more
infrastructure is needed in order to actually use WAL after the flush
point, since it could be lost.)
The value is also useful in WaitXLogInsertionsToFinish() itself, since
we can now exit quickly when all WAL has been already inserted, without
even having to take any locks.
Even though waiting for replay LSN happens without explicit transaction,
AbortTransaction() is responsible for the cleanup of the shared memory if
the error is thrown in a stored procedure. So, we need to do WaitLSNCleanup()
there to clean up after some unexpected error happened while waiting for
replay LSN.
Discussion: https://postgr.es/m/202404051815.eri4u5q6oj26%40alvherre.pgsql
Author: Alvaro Herrera
This removes the need to hold both the info_lck spinlock and
WALWriteLock to update them. We use stock atomic write instead, with
WALWriteLock held. Readers can use atomic read, without any locking.
This allows for some code to be reordered: some places were a bit
contorted to avoid repeated spinlock acquisition, but that's no longer a
concern, so we can turn them to more natural coding. Some further
changes are possible (maybe to performance wins), but in this commit I
did rather minimal ones only, to avoid increasing the blast radius.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/20200831182156.GA3983@alvherre.pgsql
After this change we have XLogCtl->logWriteResult and ->logFlushResult.
There's no functional change, other than the fact that the assignment
from shared memory to local is no longer done via struct assignment, but
instead using a macro that copies each member separately.
The current representation is inconvenient going forward; notably, we
would like to add a new member "Copy" (to keep track of the last
position copied into WAL buffers), so the symmetry between the values in
shared memory vs. those in local would be lost.
This also gives us freedom to later change the concurrency model for the
values in shared memory: we can make them use atomics instead of relying
on the info_lck spinlock.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/202404031119.cd2kugjk2vho@alvherre.pgsql
06c418e163 introduced pg_wal_replay_wait() procedure allowing to wait for
the particular LSN to be replayed on standby. The waiters were stored in
the flat array. Even though scanning small arrays is fast, that might be a
problem at scale (a lot of waiting processes).
This commit replaces the flat shared memory array with the pairing heap,
which holds the waiter with the least LSN at the top. This gives us O(log N)
complexity for both inserting and removing waiters.
Reported-by: Alvaro Herrera
Discussion: https://postgr.es/m/202404030658.hhj3vfxeyhft%40alvherre.pgsql
This adds errcodes to a set of PANIC and FATAL errors in xlog.c
and relcache.c, which previously had no errcode at all set, in
order to make fleetwide analysis of errorlogs easier. There are
many more ereport/elogs left which could benefit from having an
errcode but this at least makes a dent in the issue.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1k8LgLEqncPGmz_fWnrobV6bjABOTH4tOWta6xNcPQig@mail.gmail.com
pg_wal_replay_wait() is to be used on standby and specifies waiting for
the specific WAL location to be replayed before starting the transaction.
This option is useful when the user makes some data changes on primary and
needs a guarantee to see these changes on standby.
The queue of waiters is stored in the shared memory array sorted by LSN.
During replay of WAL waiters whose LSNs are already replayed are deleted from
the shared memory array and woken up by setting of their latches.
pg_wal_replay_wait() needs to wait without any snapshot held. Otherwise,
the snapshot could prevent the replay of WAL records implying a kind of
self-deadlock. This is why it is only possible to implement
pg_wal_replay_wait() as a procedure working in a non-atomic context,
not a function.
Catversion is bumped.
Discussion: https://postgr.es/m/eb12f9b03851bb2583adab5df9579b4b%40postgrespro.ru
Author: Kartyshov Ivan, Alexander Korotkov
Reviewed-by: Michael Paquier, Peter Eisentraut, Dilip Kumar, Amit Kapila
Reviewed-by: Alexander Lakhin, Bharath Rupireddy, Euler Taveira
Allow use of BeginInternalSubTransaction() in parallel mode, so long
as the subtransaction doesn't attempt to acquire an XID or increment
the command counter. Given those restrictions, the other parallel
processes don't need to know about the subtransaction at all, so
this should be safe. The benefit is that it allows subtransactions
intended for error recovery, such as pl/pgsql exception blocks,
to be used in PARALLEL SAFE functions.
Another reason for doing this is that the API of
BeginInternalSubTransaction() doesn't allow reporting failure.
pl/python for one, and perhaps other PLs, copes very poorly with an
error longjmp out of BeginInternalSubTransaction(). The headline
feature of this patch removes the only easily-triggerable failure
case within that function. There remain some resource-exhaustion
and similar cases, which we now deal with by promoting them to FATAL
errors, so that callers need not try to clean up. (It is likely
that such errors would leave us with corrupted transaction state
inside xact.c, making recovery difficult if not impossible anyway.)
Although this work started because of a report of a pl/python crash,
we're not going to do anything about that in the back branches.
Back-patching this particular fix is obviously not very wise.
While we could contemplate some narrower band-aid, pl/python is
already an untrusted language, so it seems okay to classify this
as a "so don't do that" case.
Patch by me, per report from Hao Zhang. Thanks to Robert Haas for
review.
Discussion: https://postgr.es/m/CALY6Dr-2yLVeVPhNMhuBnRgOZo1UjoTETgtKBx1B2gUi8yy+3g@mail.gmail.com
Two FATALs and one PANIC gain details about the LSNs they fail at:
- When restoring from a backup_label, the FATAL log generated when not
finding the checkpoint record now reports its LSN.
- When restoring from a backup_label, the FATAL log generated when not
finding the redo record referenced by a checkpoint record now shows both
the redo and checkpoint record LSNs.
- When not restoring from a backup_label, the PANIC error generated when
not finding the checkpoint record now reports its LSN.
This information is useful when debugging corruption issues, and these
LSNs may not show up in the logs depending on the level of logging
configured in the backend.
Author: David Steele
Discussion: https://postgr.es/m/0e90da89-77ca-4ccf-872c-9626d755e288@pgmasters.net
The function recurses, but didn't perform stack-depth checks. It's
just a debugging aid, so instead of the usual check_stack_depth()
call, stop the printing if we'd risk stack overflow.
Here's an example of how to test this:
(n=1000000; printf "BEGIN;"; for ((i=1;i<=$n;i++)); do printf "SAVEPOINT s$i;"; done; printf "SET log_min_messages = 'DEBUG5'; SAVEPOINT sp;") | psql >/dev/null
In the passing, swap building the list of child XIDs and recursing to
parent. That saves memory while recursing, reducing the risk of out of
memory errors with lots of subtransactions. The saving is not very
significant in practice, but this order seems more logical anyway.
Report by Egor Chindyaskin and Alexander Lakhin.
Discussion: https://www.postgresql.org/message-id/1672760457.940462079%40f306.i.mail.ru
Author: Heikki Linnakangas
Reviewed-by: Robert Haas, Andres Freund, Alexander Korotkov
Usually the compiler will optimize away the tail recursion anyway, but
if it doesn't, you can drive the function into stack overflow. For
example:
(n=1000000; printf "BEGIN;"; for ((i=1;i<=$n;i++)); do printf "SAVEPOINT s$i;"; done; printf "ERROR; COMMIT;") | psql >/dev/null
In order to get better readability and less changes to the existing code the
recursion-replacing loop is implemented as a wrapper function.
Report by Egor Chindyaskin and Alexander Lakhin.
Discussion: https://postgr.es/m/1672760457.940462079%40f306.i.mail.ru
Author: Alexander Korotkov, Heikki Linnakangas
When this code was written the duplicity didn't matter, but with all the
SLRU-bank stuff we just added, it has become excessive. Turn it into a
simpler loop with no code duplication. Also add a test so that this
code becomes covered.
Discussion: https://postgr.es/m/202403041517.3a35jw53os65@alvherre.pgsql
After commit 53c2a97a92, the code flow around the "retry" goto label
in GetMultiXactIdMembers was confused about what was possible: we never
return there with a held lock, so there's no point in testing for one.
This realization lets us simplify the code a bit. While at it, make the
scope of a couple of local variables in the same function a bit tighter.
Per Coverity.
New code in 53c2a97a92 uses direct array access to
shared->bank_locks[bankno].lock which can be made a little bit more
legible by using the SimpleLruGetBankLock helper function.
Nothing terribly serious, but let's add some clarity.
Discussion: https://postgr.es/m/202403041517.3a35jw53os65@alvherre.pgsql
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
The pid was originally used in error context of messages propagated
from parallel workers, but commit 292794f82b removed that. If the need
arises in the future, you can also get the pid with
"shm_mq_get_sender(pcxt->worker[i].error_mqh)->pid".
This test serves as a way to demonstrate how to use the features
introduced in 37b369dc67, while providing coverage for 7863ee4def
that caused the startup process to throw "PANIC: could not locate a
valid checkpoint record" when starting recovery. The test checks that a
node is able to properly restart following a crash when a restart point
was finishing across a promotion, with an injection point added in the
middle of CreateRestartPoint() to stop the restartpoint in flight. Note
that this test fails when 7863ee4def is reverted.
Kyotaro Horiguchi is the original author of this test, that has been
originally posted on the thread where 7863ee4def was discussed. I
have just upgraded and polished it to rely on injection points, making
it much cheaper to reproduce the failure.
This test requires injection points to be enabled in the builds, hence
meson and ./configure need an update to pass this knowledge down to the
test. The name of the new injection point follows the same naming
convention as 6a1ea02c49. The Makefile's EXTRA_INSTALL of recovery
TAP tests is updated to include modules/injection_points.
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Andrey Borodin, Bertrand Drouvot
Discussion: https://postgr.es/m/ZdLuxBk5hGpol91B@paquier.xyz
Now that BackendId was just another index into the proc array, it was
redundant with the 0-based proc numbers used in other places. Replace
all usage of backend IDs with proc numbers.
The only place where the term "backend id" remains is in a few pgstat
functions that expose backend IDs at the SQL level. Those IDs are now
in fact 0-based ProcNumbers too, but the documentation still calls
them "backend ids". That term still seems appropriate to describe what
the numbers are, so I let it be.
One user-visible effect is that pg_temp_0 is now a valid temp schema
name, for backend with ProcNumber 0.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
Previously, backend ID was an index into the ProcState array, in the
shared cache invalidation manager (sinvaladt.c). The entry in the
ProcState array was reserved at backend startup by scanning the array
for a free entry, and that was also when the backend got its backend
ID. Things become slightly simpler if we redefine backend ID to be the
index into the PGPROC array, and directly use it also as an index to
the ProcState array. This uses a little more memory, as we reserve a
few extra slots in the ProcState array for aux processes that don't
need them, but the simplicity is worth it.
Aux processes now also have a backend ID. This simplifies the
reservation of BackendStatusArray and ProcSignal slots.
You can now convert a backend ID into an index into the PGPROC array
simply by subtracting 1. We still use 0-based "pgprocnos" in various
places, for indexes into the PGPROC array, but the only difference now
is that backend IDs start at 1 while pgprocnos start at 0. (The next
commmit will get rid of the term "backend ID" altogether and make
everything 0-based.)
There is still a 'backendId' field in PGPROC, now part of 'vxid' which
encapsulates the backend ID and local transaction ID together. It's
needed for prepared xacts. For regular backends, the backendId is
always equal to pgprocno + 1, but for prepared xact PGPROC entries,
it's the ID of the original backend that processed the transaction.
Reviewed-by: Andres Freund, Reid Thompson
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
The new names are intended to match those in an upcoming patch that adds
a few GUCs to configure the SLRU buffer sizes.
Backwards compatibility concern: this changes the accepted names for
function pg_stat_slru_rest(). Since this function recognizes "any other
string" as a request to reset the entry for "other", this means that
calling it with the old names would silently reset "other" instead of
doing nothing or throwing an error.
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/202402261616.dlriae7b6emv@alvherre.pgsql
By enabling slot synchronization, all the failover logical replication
slots on the primary (assuming configurations are appropriate) are
automatically created on the physical standbys and are synced
periodically. The slot sync worker on the standby server pings the primary
server at regular intervals to get the necessary failover logical slots
information and create/update the slots locally. The slots that no longer
require synchronization are automatically dropped by the worker.
The nap time of the worker is tuned according to the activity on the
primary. The slot sync worker waits for some time before the next
synchronization, with the duration varying based on whether any slots were
updated during the last cycle.
A new parameter sync_replication_slots enables or disables this new
process.
On promotion, the slot sync worker is shut down by the startup process to
drop any temporary slots acquired by the slot sync worker and to prevent
the worker from trying to fetch the failover slots.
A functionality to allow logical walsenders to wait for the physical will
be done in a subsequent commit.
Author: Shveta Malik, Hou Zhijie based on design inputs by Masahiko Sawada and Amit Kapila
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Ajin Cherian, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Previously, some callers requested XLOG_BLCKSZ bytes
unconditionally. While this did not cause a problem, because the extra
bytes are ignored, it's confusing and makes it harder to add safety
checks. Additionally, the comment about zero padding was incorrect.
With this commit, all callers request the number of bytes they
actually need.
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACWBRFac2TingD3PE3w2EBHXUHY3=AEEZPJmqhpEOBGExg@mail.gmail.com
Don't deal with transaction timeout in PostgresMain(). Instead, release
transaction timeout activated by StartTransaction() in
CommitTransaction()/AbortTransaction()/PrepareTransaction(). Deal with both
enabling and disabling transaction timeout in assign_transaction_timeout().
Also, remove potentially flaky timeouts-long isolation test, which has no
guarantees to pass on slow/busy machines.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20240215230856.pc6k57tqxt7fhldm%40awork3.anarazel.de
If available, read directly from WAL buffers, avoiding the need to go
through the filesystem. Only for physical replication for now, but can
be expanded to other callers.
In preparation for replicating unflushed WAL data.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXKKK%3DwbiG5_t6dGao5GoecMwRkhr7GjVBM_jg54%2BNa%3DQ%40mail.gmail.com
Reviewed-by: Andres Freund, Alvaro Herrera, Nathan Bossart, Dilip Kumar, Nitin Jadhav, Melih Mutlu, Kyotaro Horiguchi
After calling smgropen(), it was not clear how long you could continue
to use the result, because various code paths including cache
invalidation could call smgrclose(), which freed the memory.
Guarantee that the object won't be destroyed until the end of the
current transaction, or in recovery, the commit/abort record that
destroys the underlying storage.
smgrclose() is now just an alias for smgrrelease(). It closes files
and forgets all state except the rlocator, but keeps the SMgrRelation
object valid.
A new smgrdestroy() function is used by rare places that know there
should be no other references to the SMgrRelation.
The short version:
* smgrclose() is now just an alias for smgrrelease(). It releases
resources, but doesn't destroy until EOX
* smgrdestroy() now frees memory, and should rarely be used.
Existing code should be unaffected, but it is now possible for code that
has an SMgrRelation object to use it repeatedly during a transaction as
long as the storage hasn't been physically dropped. Such code would
normally hold a lock on the relation.
This also replaces the "ownership" mechanism of SMgrRelations with a
pin counter. An SMgrRelation can now be "pinned", which prevents it
from being destroyed at end of transaction. There can be multiple pins
on the same SMgrRelation. In practice, the pin mechanism is only used
by the relcache, so there cannot be more than one pin on the same
SMgrRelation. Except with swap_relation_files XXX
Author: Thomas Munro, Heikki Linnakangas
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGJ8NTvqLHz6dqbQnt2c8XCki4r2QvXjBQcXpVwxTY_pvA@mail.gmail.com
Three LOG messages are added in the recovery code paths, providing
information that can be useful to track corruption issues depending on
the state of the cluster, telling that:
- Recovery has started from a backup_label.
- Recovery is restarting from a backup start LSN, without a
backup_label.
- Recovery has completed from a backup.
Author: Andres Freund
Reviewed-by: David Steele, Laurenz Albe, Michael Paquier
Discussion: https://postgr.es/m/20231117041811.vz4vgkthwjnwp2pp@awork3.anarazel.de
Recently-introduced code in reconstruct.c was using "unsigned"
to store the result of read(), pg_pread(), or write(). This is
completely bogus: it breaks subsequent tests for the result being
negative, as we're being reminded of by a chorus of buildfarm
warnings. Switch to "int" as was doubtless intended. (There are
several other uses of "unsigned" in this file that also look poorly
chosen to me, but for now I'm just trying to clean up the buildfarm.)
A larger problem is that "int" is not necessarily wide enough to hold
the result: per POSIX, all these functions return ssize_t. In places
where the requested read or write length clearly fits in int, that's
academic. It may be academic anyway as long as we constrain
individual data files to 1GB, since even a readv or writev-like
operation would then not be responsible for transferring more than
1GB. Nonetheless it seems like trouble waiting to happen, so I made
a pass over readv and writev calls and fixed the result variables
where that seemed appropriate. We might want to think about changing
some of the fd.c functions to return ssize_t too, for future-proofing;
but I didn't tackle that here.
Discussion: https://postgr.es/m/1672202.1703441340@sss.pgh.pa.us
To take an incremental backup, you use the new replication command
UPLOAD_MANIFEST to upload the manifest for the prior backup. This
prior backup could either be a full backup or another incremental
backup. You then use BASE_BACKUP with the INCREMENTAL option to take
the backup. pg_basebackup now has an --incremental=PATH_TO_MANIFEST
option to trigger this behavior.
An incremental backup is like a regular full backup except that
some relation files are replaced with files with names like
INCREMENTAL.${ORIGINAL_NAME}, and the backup_label file contains
additional lines identifying it as an incremental backup. The new
pg_combinebackup tool can be used to reconstruct a data directory
from a full backup and a series of incremental backups.
Patch by me. Reviewed by Matthias van de Meent, Dilip Kumar, Jakub
Wartak, Peter Eisentraut, and Álvaro Herrera. Thanks especially to
Jakub for incredibly helpful and extensive testing.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
When active, this process writes WAL summary files to
$PGDATA/pg_wal/summaries. Each summary file contains information for a
certain range of LSNs on a certain TLI. For each relation, it stores a
"limit block" which is 0 if a relation is created or destroyed within
a certain range of WAL records, or otherwise the shortest length to
which the relation was truncated during that range of WAL records, or
otherwise InvalidBlockNumber. In addition, it stores a list of blocks
which have been modified during that range of WAL records, but
excluding blocks which were removed by truncation after they were
modified and never subsequently modified again.
In other words, it tells us which blocks need to copied in case of an
incremental backup covering that range of WAL records. But this
doesn't yet add the capability to actually perform an incremental
backup; the next patch will do that.
A new parameter summarize_wal enables or disables this new background
process. The background process also automatically deletes summary
files that are older than wal_summarize_keep_time, if that parameter
has a non-zero value and the summarizer is configured to run.
Patch by me, with some design help from Dilip Kumar and Andres Freund.
Reviewed by Matthias van de Meent, Dilip Kumar, Jakub Wartak, Peter
Eisentraut, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
First, mark the xlblocks member with InvalidXLogRecPtr, then issue a
write barrier, then initialize it. That ensures that the xlblocks
member doesn't appear valid while the contents are being initialized.
In preparation for reading WAL buffer contents without a lock.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACVfFMfqD5oLzZSQQZWfXiJqd-NdX0_317veP6FuB31QWA@mail.gmail.com
Reviewed-by: Andres Freund
Dead tuples are ignored and are not marked as dead during recovery, as
it can lead to MVCC issues on a standby because its xmin may not match
with the primary. This information is tracked by a field called
"xactStartedInRecovery" in the transaction state data, switched on when
starting a transaction in recovery.
Unfortunately, this information was not correctly tracked when starting
a subtransaction, because the transaction state used for the
subtransaction did not update "xactStartedInRecovery" based on the state
of its parent. This would cause index scans done in subtransactions to
return inconsistent data, depending on how the xmin of the primary
and/or the standby evolved.
This is broken since the introduction of hot standby in efc16ea520, so
backpatch all the way down.
Author: Fei Changhong
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/tencent_C4D907A5093C071A029712E73B43C6512706@qq.com
Backpatch-through: 12
This GUC was intended as a debugging help in the 9.0 area when hot
standby and streaming replication were being developped, able to offer
more information at LOG level rather than DEBUGn. There are more tools
available these days that are able to offer rather equivalent
information, like pg_waldump introduced in 9.3. It is not obvious how
this facility is useful these days, so let's remove it.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/ZXEXEAUVFrvpquSd@paquier.xyz
Allow using multiple worker processes to build BRIN index, which until
now was supported only for BTREE indexes. For large tables this often
results in significant speedup when the build is CPU-bound.
The work is split in a simple way - each worker builds BRIN summaries on
a subset of the table, determined by the regular parallel scan used to
read the data, and feeds them into a shared tuplesort which sorts them
by blkno (start of the range). The leader then reads this sorted stream
of ranges, merges duplicates (which may happen if the parallel scan does
not align with BRIN pages_per_range), and adds the resulting ranges into
the index.
The number of duplicate results produced by workers (requiring merging
in the leader process) should be fairly small, thanks to how parallel
scans assign chunks to workers. The likelihood of duplicate results may
increase for higher pages_per_range values, but then there are fewer
page ranges in total. In any case, we expect the merging to be much
cheaper than summarization, so this should be a win.
Most of the parallelism infrastructure is a simplified copy of the code
used by BTREE indexes, omitting the parts irrelevant for BRIN indexes
(e.g. uniqueness checks).
This also introduces a new index AM flag amcanbuildparallel, determining
whether to attempt to start parallel workers for the index build.
Original patch by me, with reviews and substantial reworks by Matthias
van de Meent, certainly enough to make him a co-author.
Author: Tomas Vondra, Matthias van de Meent
Reviewed-by: Matthias van de Meent
Discussion: https://postgr.es/m/c2ee7d69-ce17-43f2-d1a0-9811edbda6e6%40enterprisedb.com
