Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
Currently there are two ways to trigger log rotation in logging collector
process: call pg_rotate_logfile() SQL-function or send SIGUSR1 signal directly
to logging collector process. However, it's nice to have more suitable way
for external tools to do that, which wouldn't require SQL connection or
knowledge of logging collector pid. This commit implements triggering log
rotation by "pg_ctl logrotate" command.
Discussion: https://postgr.es/m/20180416.115435.28153375.horiguchi.kyotaro%40lab.ntt.co.jp
Author: Kyotaro Horiguchi, Alexander Kuzmenkov, Alexander Korotkov
Since some preparation work had already been done, the only source
changes left were changing empty-element tags like <xref linkend="foo">
to <xref linkend="foo"/>, and changing the DOCTYPE.
The source files are still named *.sgml, but they are actually XML files
now. Renaming could be considered later.
In the build system, the intermediate step to convert from SGML to XML
is removed. Everything is build straight from the source files again.
The OpenSP (or the old SP) package is no longer needed.
The documentation toolchain instructions are updated and are much
simpler now.
Peter Eisentraut, Alexander Lakhin, Jürgen Purtz
IDs in SGML are case insensitive, and we have accumulated a mix of upper
and lower case IDs, including different variants of the same ID. In
XML, these will be case sensitive, so we need to fix up those
differences. Going to all lower case seems most straightforward, and
the current build process already makes all anchors and lower case
anyway during the SGML->XML conversion, so this doesn't create any
difference in the output right now. A future XML-only build process
would, however, maintain any mixed case ID spellings in the output, so
that is another reason to clean this up beforehand.
Author: Alexander Lakhin <exclusion@gmail.com>
For DocBook XML compatibility, don't use SGML empty tags (</>) anymore,
replace by the full tag name. Add a warning option to catch future
occurrences.
Alexander Lakhin, Jürgen Purtz
If an operation being waited for does not complete within the timeout,
then exit with a nonzero exit status. This was previously handled
inconsistently.
Commit 05cd12ed5 ("pg_ctl: Change default to wait for all actions")
was a tad sloppy about updating the documentation to match. The
documentation was also sorely in need of a copy-editing pass, having
been adjusted at different times by different people who took little
care to maintain consistency of style.
The different actions in pg_ctl had different defaults for -w and -W,
mostly for historical reasons. Most users will want the -w behavior, so
make that the default.
Remove the -w option in most example and test code, so avoid confusion
and reduce verbosity. pg_upgrade is not touched, so it can continue to
work with older installations.
Reviewed-by: Beena Emerson <memissemerson@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
Various example and test code used -m fast explicitly, but since it's
the default, this can be omitted now or should be replaced by a better
example.
pg_upgrade is not touched, so it can continue to operate with older
installations.
When waiting is selected for the promote action, look into pg_control
until the state changes, then use the PQping-based waiting until the
server is reachable.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Many automated test suites call pg_ctl. Buildfarm members axolotl,
hornet, mandrill, shearwater, sungazer and tern have failed when server
shutdown took longer than the pg_ctl default 60s timeout. This addition
permits slow hosts to easily raise the timeout without us editing a
--timeout argument into every test suite pg_ctl call. Back-patch to 9.1
(all supported versions) for the sake of automated testing.
Reviewed by Tom Lane.
pg_ctl will log to the Windows event log when it is running as a service,
which is the primary way of running PostgreSQL on Windows. This option
makes it possible to specify which event source to use for this, in order
to separate different instances. The server logging itself is still controlled
by the regular logging parameters, including a separate setting for the event
source. The parameter to pg_ctl only controlls the logging from pg_ctl itself.
MauMau, review in many iterations by Amit Kapila and me.
Return '4' and report a meaningful error message when a non-existent or
invalid data directory is passed. Previously, pg_ctl would just report
the server was not running.
Patch by me and Amit Kapila
Report from Peter Eisentraut
DocBook XML is superficially compatible with DocBook SGML but has a
slightly stricter DTD that we have been violating in a few cases.
Although XSLT doesn't care whether the document is valid, the style
sheets don't necessarily process invalid documents correctly, so we need
to work toward fixing this.
This first commit moves the indexterms in refentry elements to an
allowed position. It has no impact on the output.
This changes the behavior of the start and stop actions to exit
successfully if the server was already started or stopped.
This changes the default behavior of the start action: Before, if the
server was already running, it would print a message and succeed. Now,
that situation will result in an error. When running in idempotent
mode, no message is printed and pg_ctl exits successfully.
It was considered to just make the idempotent behavior the default and
only option, but pg_upgrade needs the old behavior.
Before, some places didn't document the short options (-? and -V),
some documented both, some documented nothing, and they were listed in
various orders. Now this is hopefully more consistent and complete.
The default for the choice attribute of the <arg> element is "opt",
which would normally put the argument inside brackets. But the DSSSL
stylesheets contain a hack that treats <arg> directly inside <group>
specially, so that <group><arg>-x</arg><arg>-y</arg></group> comes out
as [ -x | -y ] rather than [ [-x] | [-y] ], which it would technically
be. But when building man pages, this doesn't work, and so the
command synopses on the man pages contain lots of extra brackets.
By putting choice="opt" or choice="plain" explicitly on every <arg>
and <group> element, we avoid any toolchain dependencies like that,
and it also makes it clearer in the source code what is meant.
In passing, make some small corrections in the documentation about
which arguments are really optional or not.
Add more markup in particular so that the command options appear
consistently in monospace in the HTML output.
On the vacuumdb reference page, remove listing all the possible
options in the synopsis. They have become too many now; we have the
detailed options list for that.
There is what may actually be a mistake in our markup. The problem is
in a situation like
<para>
<command>FOO</command> is ...
there is strictly speaking a line break before "FOO". In the HTML
output, this does not appear to be a problem, but in the man page
output, this shows up, so you get double blank lines at odd places.
So far, we have attempted to work around this with an XSL hack, but
that causes other problems, such as creating run-ins in places like
<acronym>SQL</acronym> <command>COPY</command>
So fix the problem properly by removing the extra whitespace. I only
fixed the problems that affect the man page output, not all the
places.
Since start/stop/restart/reload/status is a kind of standard command
set, it seems odd to insert the special-purpose "promote" in between
the closely related "restart" and "reload". So put it after "status"
in code and documentation.
Put the documentation of the -U option in some sensible place.
Rewrite the synopsis sentence in help and documentation to make it
less of a growing mouthful.
