Checking for DocBook being installed was valuable when we were on the
OpenSP docs toolchain, because that was rather hard to get installed
fully. Nowadays, as long as you have xmllint and xsltproc installed,
you're good, because those programs will fetch the DocBook files off
the net at need. Moreover, testing this at configure time means that
a network access may well occur whether or not you have any interest
in building the docs later. That can be slow (typically 2 or 3
seconds, though much higher delays have been reported), and it seems
not very nice to be doing an off-machine access without warning, too.
Hence, drop the PGAC_CHECK_DOCBOOK probe, and adjust related
documentation. Without that macro, there's not much left of
config/docbook.m4 at all, so I just removed it.
Back-patch to v11, where we started to use xmllint in the
PGAC_CHECK_DOCBOOK probe.
Discussion: https://postgr.es/m/E2EE6B76-2D96-408A-B961-CAE47D1A86F0@yesql.se
Discussion: https://postgr.es/m/A55A7FC9-FA60-47FE-98B5-139CDC57CE6E@gmail.com
The documentation omitted the critical tidbit that a keyword-array entry
is simply ignored if its corresponding value-array entry is NULL or an
empty string; it will *not* override any previously-obtained value for
the parameter. (See conninfo_array_parse().) I'd supposed that would
force the setting back to default, which is what led me into bug #16746;
but it doesn't.
While here, I couldn't resist the temptation to do some copy-editing,
both in the description of PQconnectdbParams() and in the section
about connection URI syntax.
Discussion: https://postgr.es/m/931505.1606618746@sss.pgh.pa.us
If more distinct statements than pg_stat_statements.max are observed,
pg_stat_statements entries about the least-executed statements are
deallocated. This commit enables us to track the total number of times
those entries were deallocated. That number can be viewed in the
pg_stat_statements_info view that this commit adds. It's useful when
tuning pg_stat_statements.max parameter. If it's high, i.e., the entries
are deallocated very frequently, which might cause the performance
regression and we can increase pg_stat_statements.max to avoid those
frequent deallocations.
The pg_stat_statements_info view is intended to display the statistics
of pg_stat_statements module itself. Currently it has only one column
"dealloc" indicating the number of times entries were deallocated.
But an upcoming patch will add other columns (for example, the time
at which pg_stat_statements statistics were last reset) into the view.
Author: Katsuragi Yuta, Yuki Seino
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0d9f1107772cf5c3f954e985464c7298@oss.nttdata.com
A prepared statement is re-analyzed and re-planned whenever database
objects used in the statement have undergone definitional changes or
the planner statistics of them have been updated. The former has been
documented from before, but the latter was not previously. This commit
adds the description about the latter case into the docs.
Author: Atsushi Torikoshi
Reviewed-by: Andy Fan, Fujii Masao
Discussion: https://postgr.es/m/3ac82f4817c9fe274a905c8a38d87bd9@oss.nttdata.com
Break the per-index-type discussions into <sect2>'s so as to make
them more visually separate and easier to find. Improve the markup,
and make a couple of small wording adjustments.
This also fixes one stray reference to the now-deprecated point
operators <^ and >^.
Dagfinn Ilmari Mannsåker, reviewed by David Johnston and Jürgen Purtz
Discussion: https://postgr.es/m/877dukhvzg.fsf@wibble.ilmari.org
This is a variant of the normal Unix-domain sockets that don't use the
file system but a separate "abstract" namespace. At the user
interface, such sockets are represented by names starting with "@".
Supported on Linux and Windows right now.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/6dee8574-b0ad-fc49-9c8c-2edc796f0033@2ndquadrant.com
Previously some index items have " ," (i.e., space + comma) in the docs
as follows. Since the space character before the comma is unnecessary,
this commit gets rid of that for the sake of consistency with other
index items.
parallel_leader_participation configuration parameter , Other Planner Options
Author: Fujii Masao
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/e87b4ddf-1498-2850-bf55-519df3928fd4@oss.nttdata.com
Historically these were called >^ and <^, but that is inconsistent
with the similar box, polygon, and circle operators, which are named
|>> and <<| respectively. Worse, the >^ and <^ names are used for
*not* strict above/below tests for the box type.
Hence, invent new operators following the more common naming. The
old operators remain available for now, and are still accepted by
the relevant index opclasses too. But there's a deprecation notice,
so maybe we can get rid of them someday.
Emre Hasegeli, reviewed by Pavel Borisov
Discussion: https://postgr.es/m/24348.1587444160@sss.pgh.pa.us
As per discussion with Peter Eisentraunt, the SQL standard specifies
that any tuple insertion done as part of CREATE TABLE AS happens without
any extra ACL check, so it makes little sense to keep a check for INSERT
privileges when using WITH DATA. Materialized views are not part of the
standard, but similarly, this check can be confusing as this refers to
an access check on a table created within the same command as the one
that would insert data into this table.
This commit removes the INSERT privilege check for WITH DATA, the
default, that 846005e removed partially, but only for WITH NO DATA.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/d049c272-9a47-d783-46b0-46665b011598@enterprisedb.com
This feature was added a long time ago, in 7c1e67bd5 and eb121ba2c,
but never documented in any user-facing way. (Documentation added
in 6126d3e70 was commented out almost immediately, in 8272fc3f7.)
That's because, while this syntax is defined by SQL:99, our
implementation is only vaguely related to the standard's semantics.
The standard appears to intend a run-time not parse-time test, and
it definitely intends that the test should understand subtype
relationships.
No one has stepped up to fix that in the intervening years, but
people keep coming across the code and asking why it's not documented.
Let's just get rid of it: if anyone ever wants to make it work per
spec, they can easily recover whatever parts of this code are still
of value from our git history.
If there's anyone out there who's actually using this despite its
undocumented status, they can switch to using pg_typeof() instead,
eg. "pg_typeof(something) = 'mytype'::regtype". That gives
essentially the same semantics as what our IS OF code did.
(We didn't have that function last time this was discussed, or
we would have ripped out IS OF then.)
Discussion: https://postgr.es/m/CAKFQuwZ2pTc-DSkOiTfjauqLYkNREeNZvWmeg12Q-_69D+sYZA@mail.gmail.com
Discussion: https://postgr.es/m/BAY20-F23E9F2B4DAB3E4E88D3623F99B0@phx.gbl
Discussion: https://postgr.es/m/3E7CF81D.1000203@joeconway.com
Add hash functions for the record type as well as a hash operator
family and operator class for the record type. This enables all the
hash functionality for the record type such as hash-based plans for
UNION/INTERSECT/EXCEPT DISTINCT, recursive queries using UNION
DISTINCT, hash joins, and hash partitioning.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/38eccd35-4e2d-6767-1b3c-dada1eac3124%402ndquadrant.com
Bug #16652 complains that pg_reload_conf() returned true, even though
the configuration file contained errors. That's the way pg_reload_conf()
works, by design, but the documentation wasn't very clear on it. Clarify
that a 'true' return value only means that the signal was sent
successfully. Also add links to the system views that can be used to
check the configuration files for errors.
David G. Johnston, with some rewording by me.
Discussion: https://www.postgresql.org/message-id/CAKFQuwax6GxhUQEes0D045UtXG-fBraM39_6UMd5JyR5K1HWCQ%40mail.gmail.com
When specified, WITH NO DATA does not insert any data into the relation
created, so skip checking for the insert permissions. With WITH DATA or
WITH NO DATA, it is always required for the user to have CREATE
privileges on the schema targeted for the relation.
Note that plain CREATE TABLE AS or CREATE MATERIALIZED VIEW queries have
begun to work accidentally without INSERT privilege checks as of
874fe3ae, while using EXECUTE or EXPLAIN ANALYZE would fail with the ACL
check, so this makes the behavior for all the command flavors consistent
with each other. This is arguably a bug fix, but there have been no
complaints about the current behavior either so stable branches are not
changed.
While on it, document properly the privileges requirements for each
commands with more tests for all the scenarios possible, and avoid a
useless bulk-insert allocation when using WITH NO DATA.
Author: Bharath Rupireddy
Reviewed-by: Anastasia Lubennikova, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACWc3N8j0_9nMPz9wcAUnVcdKHzFdDZJ3hVFNEbqtcyG9w@mail.gmail.com
These flags should be independent: in particular an index AM should
be able to say that it supports include columns without necessarily
supporting multiple key columns. The included-columns patch got
this wrong, possibly aided by the fact that it didn't bother to
update the documentation.
While here, clarify some text about amcanreturn, which was a little
vague about what should happen when amcanreturn reports that only
some of the index columns are returnable.
Noted while reviewing the SP-GiST included-columns patch, which
quite incorrectly (and unsafely) changed SP-GiST to claim
amcanmulticol = true as a workaround for this bug.
Backpatch to v11 where included columns were introduced.
Obviously, in order to equality operator be satisfiable, target string must
contain all the trigrams of the search string. On this base, we implement
equality operator in GiST/GIN indexes with recheck.
Discussion: https://postgr.es/m/CAOBaU_YWwtT7tdggtROacjdOdeYHCz-tmSwuC-j-TOG-g97J0w%40mail.gmail.com
Author: Julien Rouhaud
Reviewed-by: Tom Lane, Alexander Korotkov, Georgios Kokolatos, Erik Rijkers
This is mostly straightforward. However, we disallow replacing
constraint triggers or changing the is-constraint property; perhaps
that can be added later, but the complexity versus benefit tradeoff
doesn't look very good.
Also, no special thought is taken here for whether replacing an
existing trigger should result in changes to queued-but-not-fired
trigger actions. We just document that if you're surprised by the
results, too bad, don't do that. (Note that any such pending trigger
activity would have to be within the current session.)
Takamichi Osumi, reviewed at various times by Surafel Temesgen,
Peter Smith, and myself
Discussion: https://postgr.es/m/0DDF369B45A1B44B8A687ED43F06557C010BC362@G01JPEXMBYT03
This started with the intent to explain that range upper bounds
are exclusive, which previously you could only find out by reading
the CREATE TABLE man page. But I soon found that section 5.11
really could stand a fair amount of editorial attention. It's
apparently been revised several times without much concern for
overall flow, nor careful copy-editing.
Back-patch to v11, which is as far as the patch goes easily.
Per gripe from Edson Richter. Thanks to David Johnston for review.
Discussion: https://postgr.es/m/DM6PR13MB3988736CF8F5DC5720440231CFE60@DM6PR13MB3988.namprd13.prod.outlook.com
This provides a handy way to get, say, the last field of the string.
Use of a negative index in this way has precedent in the nearby
left() and right() functions.
The implementation scans the string twice when N < -1, but it seems
likely that N = -1 will be the huge majority of actual use cases,
so I'm not really excited about adding complexity to avoid that.
Nikhil Benesch, reviewed by Jacob Champion; cosmetic tweakage by me
Discussion: https://postgr.es/m/cbb7f861-6162-3a51-9823-97bc3aa0b638@gmail.com
This was marked as BYTEA, but is more like TEXT, which is how we already
pass the history timeline file name. Internally, we don't do any
encoding or bytea escape handling, but TEXT seems closest. This should
cause no behavioral change.
Reported-by: Brar Piening
Discussion: https://postgr.es/m/6a1b9cd9-17e3-df67-be55-86102af6bdf5@gmx.de
Backpatch-through: master
Using a hot standby server as the source has not been possible, because
pg_rewind creates a temporary table in the source system, to hold the
list of file ranges that need to be fetched. Refactor it to queue up the
file fetch requests in pg_rewind's memory, so that the temporary table
is no longer needed.
Also update the logic to compute 'minRecoveryPoint' correctly, when the
source is a standby server.
Reviewed-by: Kyotaro Horiguchi, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/0c5b3783-af52-3ee5-f8fa-6e794061f70d%40iki.fi
Move the system catalog index declarations from catalog/indexing.h to
the respective parent tables' catalog/pg_*.h files. The original
reason for having it split was that the old genbki system produced the
output in the order of the catalog files it read, so all the indexing
stuff needed to come separately. But this is no longer the case, and
keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
Move the system catalog toast table declarations from
catalog/toasting.h to the respective parent tables' catalog/pg_*.h
files. The original reason for having it split was that the old
genbki system produced the output in the order of the catalog files it
read, so all the toasting stuff needed to come separately. But this
is no longer the case, and keeping it together makes more sense.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/c7cc82d6-f976-75d6-2e3e-b03d2cab26bb@2ndquadrant.com
Revert 59ab4ac32, as well as the followup fix 33862cb9c, in all
branches. We need to think a bit harder about what the behavior
of LOCK TABLE on views should be, and there's no time for that
before next week's releases. We'll take another crack at this
later.
Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
Convert array_append, array_prepend, array_cat, array_position,
array_positions, array_remove, array_replace, and width_bucket
to use anycompatiblearray. This is a simple extension of commit
5c292e6b9 to hit some other places where there's a pretty obvious
gain in usability from doing so.
Ideally we'd also modify other functions taking multiple old-style
polymorphic arguments. But most of the remainder are tied into one
or more operator classes, making any such change a much larger can of
worms than I desire to open right now.
Discussion: https://postgr.es/m/77675130-89da-dab1-51dd-492c93dcf5d1@postgresfriends.org
This allows use of a "default" expression that doesn't slavishly
match the data column's type. Formerly you got something like
"function lag(numeric, integer, integer) does not exist", which
is not just unhelpful but actively misleading.
The SQL spec suggests that the default should be coerced to the data
column's type, but this implementation instead chooses the common
supertype, which seems at least as reasonable.
(Note: I took the opportunity to run "make reformat-dat-files" on
pg_proc.dat, so this commit includes some cosmetic changes to
recently-added entries that aren't related to lead/lag.)
Vik Fearing
Discussion: https://postgr.es/m/77675130-89da-dab1-51dd-492c93dcf5d1@postgresfriends.org
This reverts the following set of commits, following complaints about
the lack of portability of the central part of the code in bufmgr.c as
well as the use of partition mapping locks during page reads:
c780a7a9
f2b88396
b787d4ce
ce7f772c
60a51c6b
Per discussion with Andres Freund, Robert Haas and myself.
Bump catalog version.
Discussion: https://postgr.es/m/20201029181729.2nrub47u7yqncsv7@alap3.anarazel.de
The intention in commit 491c029db was to require superuserness to
change the BYPASSRLS property, but the actual effect of the coding
in AlterRole() was to require superuserness to change anything at all
about a BYPASSRLS role. Other properties of a BYPASSRLS role should
be changeable under the same rules as for a normal role, though.
Fix that, and also take care of some documentation omissions related
to BYPASSRLS and REPLICATION role properties.
Tom Lane and Stephen Frost, per bug report from Wolfgang Walther.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/a5548a9f-89ee-3167-129d-162b5985fcf8@technowledgy.de
Remove old containment operators @ and ~ for built-in geometry data
types. These have been deprecated; use <@ and @> instead.
(Some contrib modules still contain the same deprecated operators.
That will be dealt with separately.)
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/flat/20201027032511.GF9241@telsasoft.com
sslinfo was passing the Port->ssl member directly to OpenSSL in order
to extract information regarding the connection. This breaks the API
provided by the backend TLS implementation, as well as duplicates code
for no benefit. Rewrite to make use of the backend API as much as
possible.
Author: Daniel Gustafsson <daniel@yesql.se>
Record the current version of dependent collations in pg_depend when
creating or rebuilding an index. When accessing the index later, warn
that the index may be corrupted if the current version doesn't match.
Thanks to Douglas Doole, Peter Eisentraut, Christoph Berg, Laurenz Albe,
Michael Paquier, Robert Haas, Tom Lane and others for very helpful
discussion.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> (earlier versions)
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
Provide a place for the version of referenced database objects to be
recorded. A follow-up commit will use this to record dependencies on
collation versions for indexes, but similar ideas for other kinds of
objects have also been mooted.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
This model couldn't be extended to cover the default collation, and
didn't have any information about the affected database objects when the
version changed. Remove, in preparation for a follow-up commit that
will add a new mechanism.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
