The idea is to encourage more the use of these new routines across the
tree, as these offer stronger type safety guarantees than palloc().
This batch of changes includes most of the trivial changes suggested by
the author for src/backend/.
A total of 334 files are updated here. Among these files, 48 of them
have their build change slightly; these are caused by line number
changes as the new allocation formulas are simpler, shaving around 100
lines of code in total.
Similar work has been done in 0c3c5c3b06 and 31d3847a37.
Author: David Geier <geidav.pg@gmail.com>
Discussion: https://postgr.es/m/ad0748d4-3080-436e-b0bc-ac8f86a3466a@gmail.com
This reverts commit 1fd981f053, based on concerns that the logging
improvements do not justify the protocol breakage of dropping an unnamed
portal once its execution has completed.
It seems unlikely that one would try to send an execute or describe
message after the portal has been used, but if they do such
post-completion messages would not be able to process as the previous
versions. Let's revert this change for now so as we keep compatibility
and consider a different solution.
The tests added by 76bba03312 track the pre-1fd981f05369 behavior, and
are still valid.
Discussion: https://postgr.es/m/CA+TgmoYFJyJNQw3RT7veO3M2BWRE9Aw4hprC5rOcawHZti-f8g@mail.gmail.com
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
Previously, unnamed portals were kept until the next Bind message or the
end of the transaction. This could cause temporary files to persist
longer than expected and make logging not reflect the actual SQL
responsible for the temporary file.
This patch changes exec_execute_message() to drop unnamed portals
immediately after execution to completion at the end of an Execute
message, making their removal more aggressive. This forces temporary
file cleanups to happen at the same time as the completion of the portal
execution, with statement logging correctly reflecting to which
statements these temporary files were attached to (see the diffs in the
TAP test updated by this commit for an idea).
The documentation is updated to describe the lifetime of unnamed
portals, and test cases are updated to verify temporary file removal and
proper statement logging after unnamed portal execution. This changes
how unnamed portals are handled in the protocol, hence no backpatch is
done.
Author: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Co-Authored-by: Sami Imseih <samimseih@gmail.com>
Co-Authored-by: Mircea Cadariu <cadariu.mircea@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tTrTUoEr3kDXCuKsvqYGq8OOHiBwoD-dyJocq95uEOTQ%40mail.gmail.com
The original is pretty baroque for no apparent reason; arguably, commit
2f9661311b should have done this. Noted while reviewing related code
for bug #18984. This is cosmetic (though I'm surprised that my compiler
generates shorter assembly this way), so no backpatch.
Discussion: https://postgr.es/m/18984-0f4778a6599ac3ae@postgresql.org
This allows extensions to have access to any data they've stored
in the ExplainState during planning. Unfortunately, it won't help
with EXPLAIN EXECUTE is used, but since that case is less common,
this still seems like an improvement.
Since planner() has quite a few arguments now, also add some
documentation of those arguments and the return value.
Author: Robert Haas <rhaas@postgresql.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYWKHU2hKr62Toyzh-kTDEnMDeLw7gkOOnjL-TnOUq0kQ@mail.gmail.com
This commit allows to log the raw parse tree in the same way we
currently log the parse tree, rewritten tree, and plan tree.
To avoid unnecessary log noise for users not interested in this
detail, a new GUC option, "debug_print_raw_parse", has been added.
When starting the PostgreSQL process with "-d N", and N is 3 or higher,
debug_print_raw_parse is enabled automatically, alongside
debug_print_parse.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/CAEoWx2mcO0Gpo4vd8kPMAFWeJLSp0MeUUnaLdE1x0tSVd-VzUw%40mail.gmail.com
In the current system architecture, none of these are worth obsessing
over; most are once-per-process leaks. However, Valgrind complains
about all of them, and if we get to using threads rather than
processes for backend sessions, it will become more interesting to
avoid per-session leaks.
* Fix leaks in StartupXLOG() and ShutdownWalRecovery().
* Fix leakage of pq_mq_handle in a parallel worker.
While at it, move mq_putmessage's "Assert(pq_mq_handle != NULL)"
to someplace where it's not trivially useless.
* Fix leak in logicalrep_worker_detach().
* Don't leak the startup-packet buffer in ProcessStartupPacket().
* Fix leak in evtcache.c's DecodeTextArrayToBitmapset().
If the presented array is toasted, this neglected to free the
detoasted copy, which was then leaked into EventTriggerCacheContext.
* I'm distressed by the amount of code that BuildEventTriggerCache
is willing to run while switched into a long-lived cache context.
Although the detoasted array is the only leak that Valgrind reports,
let's tighten things up while we're here. (DecodeTextArrayToBitmapset
is still run in the cache context, so doing this doesn't remove the
need for the detoast fix. But it reduces the surface area for other
leaks.)
* load_domaintype_info() intentionally leaked some intermediate cruft
into the long-lived DomainConstraintCache's memory context, reasoning
that the amount of leakage will typically not be much so it's not
worth doing a copyObject() of the final tree to avoid that. But
Valgrind knows nothing of engineering tradeoffs and complains anyway.
On the whole, the copyObject doesn't cost that much and this is surely
not a performance-critical code path, so let's do it the clean way.
* MarkGUCPrefixReserved didn't bother to clean up removed placeholder
GUCs at all, which shows up as a leak in one regression test.
It seems appropriate for it to do as much cleanup as
define_custom_variable does when replacing placeholders, so factor
that code out into a helper function. define_custom_variable's logic
was one brick shy of a load too: it forgot to free the separate
allocation for the placeholder's name.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/285483.1746756246@sss.pgh.pa.us
Commit 719dcf3c42 introduced a field called CachedPlanType in
PlannedStmt to allow extensions to determine whether a cached plan is
generic or custom.
After discussion, the concepts that we want to track are a bit wider
than initially anticipated, as it is closer to knowing from which
"source" or "origin" a PlannedStmt has been generated or retrieved.
Custom and generic cached plans are a subset of that.
Based on the state of HEAD, we have been able to define two more
origins:
- "standard", for the case where PlannedStmt is generated in
standard_planner(), the most common case.
- "internal", for the fake PlannedStmt generated internally by some
query patterns.
This could be tuned in the future depending on what is needed. This
looks like a good starting point, at least. The default value is called
"UNKNOWN", provided as fallback value. This value is not used in the
core code, the idea is to let extensions building their own PlannedStmts
know about this new field.
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/aILaHupXbIGgF2wJ@paquier.xyz
PlannedStmt gains a new field, called CachedPlanType, able to track if a
given plan tree originates from the cache and if we are dealing with a
generic or custom cached plan.
This field can be used for monitoring or statistical purposes, in the
executor hooks, for example, based on the planned statement attached to
a QueryDesc. A patch is under discussion for pg_stat_statements to
provide an equivalent of the counters in pg_prepared_statements for
custom and generic plans, to provide a more global view of such data, as
this data is now restricted to the current session.
The concept introduced in this commit is useful on its own, and has been
extracted from a larger patch by the same author.
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAA5RZ0uFw8Y9GCFvafhC=OA8NnMqVZyzXPfv_EePOt+iv1T-qQ@mail.gmail.com
We have an assertion to ensure that a command tag has been assigned by
the time we're done executing, but if we happen to execute a command
with no queries, the assertion would fail. Per discussion, rather than
contort things to get a tag assigned, just remove the assertion.
Oversight in 2f9661311b. That commit also retained a comment that
explained logic that had been adjacent to it but diffused into various
places, leaving none apt to keep part of the comment. Remove that part,
and rewrite what remains for extra clarity.
Bug: #18984
Backpatch-through: 13
Reported-by: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/18984-0f4778a6599ac3ae@postgresql.org
This commit adds the boilerplate code for supporting a list of
options in CHECKPOINT commands. No actual options are supported
yet, but follow-up commits will add support for MODE and
FLUSH_UNLOGGED. While at it, this commit refactors the code for
executing CHECKPOINT commands to its own function since it's about
to become significantly larger.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
The new name more accurately reflects the effects of this flag on a
requested checkpoint. Checkpoint-related log messages (i.e., those
controlled by the log_checkpoints configuration parameter) will now
say "fast" instead of "immediate", too. Likewise, references to
"immediate" checkpoints in the documentation have been updated to
say "fast". This is preparatory work for a follow-up commit that
will add a MODE option to the CHECKPOINT command.
Author: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aDnaKTEf-0dLiEfz%40msg.df7cb.de
AlterDomainStmt.subtype used characters for its subtypes of commands,
SET|DROP DEFAULT|NOT NULL and ADD|DROP|VALIDATE CONSTRAINT, which were
hardcoded in a couple of places of the code. The code is improved by
using an enum instead, with the same character values as the original
code.
Note that the field was documented in parsenodes.h and that it forgot to
mention 'V' (VALIDATE CONSTRAINT).
Author: Quan Zongliang <quanzongliang@yeah.net>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: wenhui qiu <qiuwenhuifx@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/41ff310b-16bd-44b9-a3ef-97e20f14b709@yeah.net
uint64 was chosen to be consistent with the type used by the query ID,
but the conclusion of a recent discussion for the query ID is that int64
is a better fit as the signed form is shown to the user, for PGSS or
EXPLAIN outputs.
This commit changes the plan ID to use int64, following c3eda50b06
that has done the same for the query ID.
The plan ID is new to v18, introduced in 2a0cd38da5.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/aCvzJNwetyEI3Sgo@paquier.xyz
uint64 was perhaps chosen in cff440d36 as the type was uint32 prior to
that widening work.
Having this as uint64 doesn't make much sense and just adds the overhead of
having to remember that we always output this in its signed form. Let's
remove that overhead.
The signed form output is seemingly required since we have no way to
represent the full range of uint64 in an SQL type. We use BIGINT in places
like pg_stat_statements, which maps directly to int64.
The release notes "Source Code" section may want to mention this
adjustment as some extensions may wish to adjust their code.
Author: David Rowley <dgrowleyml@gmail.com>
Suggested-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/50cb0c8b-994b-48f9-a1c4-13039eb3536b@eisentraut.org
9219093cab modularized log_connections output to allow more
granular control over which aspects of connection establishment are
logged. It converted the boolean log_connections GUC into a list of strings
and deprecated previously supported boolean-like values on, off, true,
false, 1, 0, yes, and no. Those values still work, but they are
supported mainly for backwards compatability. As such, documented
examples of log_connections should not use these deprecated values.
Update references in the docs to deprecated log_connections values. Many
of the tests use log_connections. This commit also updates the tests to
use the new values of log_connections. In some of the tests, the updated
log_connections value covers a narrower set of aspects (e.g. the
'authentication' aspect in the tests in src/test/authentication and the
'receipt' aspect in src/test/postmaster). In other cases, the new value
for log_connections is a superset of the previous included aspects (e.g.
'all' in src/test/kerberos/t/001_auth.pl).
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/e1586594-3b69-4aea-87ce-73a7488cdc97%40eisentraut.org
As pointed out by Tom Lane, the patch introduced fragile and invasive
design around plan invalidation handling when locking of prunable
partitions was deferred from plancache.c to the executor. In
particular, it violated assumptions about CachedPlan immutability and
altered executor APIs in ways that are difficult to justify given the
added complexity and overhead.
This also removes the firstResultRels field added to PlannedStmt in
commit 28317de72, which was intended to support deferred locking of
certain ModifyTable result relations.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/605328.1747710381@sss.pgh.pa.us
The macros INJECTION_POINT() and INJECTION_POINT_CACHED() are extended
with an optional argument that can be passed down to the callback
attached when an injection point is run, giving to callbacks the
possibility to manipulate a stack state given by the caller. The
existing callbacks in modules injection_points and test_aio have their
declarations adjusted based on that.
da7226993f (core AIO infrastructure) and 93bc3d75d8 (test_aio) and
been relying on a set of workarounds where a static variable called
pgaio_inj_cur_handle is used as runtime argument in the injection point
callbacks used by the AIO tests, in combination with a TRY/CATCH block
to reset the argument value. The infrastructure introduced in this
commit will be reused for the AIO tests, simplifying them.
Reviewed-by: Greg Burd <greg@burd.me>
Discussion: https://postgr.es/m/Z_y9TtnXubvYAApS@paquier.xyz
This adds a function for retrieving memory context statistics
and information from backends as well as auxiliary processes.
The intended usecase is cluster debugging when under memory
pressure or unanticipated memory usage characteristics.
When calling the function it sends a signal to the specified
process to submit statistics regarding its memory contexts
into dynamic shared memory. Each memory context is returned
in detail, followed by a cumulative total in case the number
of contexts exceed the max allocated amount of shared memory.
Each process is limited to use at most 1Mb memory for this.
A summary can also be explicitly requested by the user, this
will return the TopMemoryContext and a cumulative total of
all lower contexts.
In order to not block on busy processes the caller specifies
the number of seconds during which to retry before timing out.
In the case where no statistics are published within the set
timeout, the last known statistics are returned, or NULL if
no previously published statistics exist. This allows dash-
board type queries to continually publish even if the target
process is temporarily congested. Context records contain a
timestamp to indicate when they were submitted.
Author: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Discussion: https://postgr.es/m/CAH2L28v8mc9HDt8QoSJ8TRmKau_8FM_HKS41NeO9-6ZAkuZKXw@mail.gmail.com
This gets rid of the bespoken ProcessWalRcvInterrupts() function,
which lets walreceiver terminate at any CHECK_FOR_INTERRUPTS() call.
And it's less code anyway.
We can now use the standard libpqsrv_connect_params() libpq wrapper
from libpq-be-fe-helpers.h, removing more code. We attempted to do
that earlier already in commit 728f86fec6, but that was reverted
because it didn't call ProcessWalRcvInterrupts() and therefore didn't
react to shutdown requests. Now that ProcessWalRcvInterrupts() is
gone, it works. As stated in that commit, this also leads to
libpqwalreceiver reserving file descriptors for libpq conncetions,
which is nice.
Author: Andres Freund <andres@anarazel.de> (the earlier commit)
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Yura Sokolov <y.sokolov@postgrespro.ru>
Currently, the cancel request key is a 32-bit token, which isn't very
much entropy. If you want to cancel another session's query, you can
brute-force it. In most environments, an unauthorized cancellation of
a query isn't very serious, but it nevertheless would be nice to have
more protection from it. Hence make the key longer, to make it harder
to guess.
The longer cancellation keys are generated when using the new protocol
version 3.2. For connections using version 3.0, short 4-bytes keys are
still used.
The new longer key length is not hardcoded in the protocol anymore,
the client is expected to deal with variable length keys, up to 256
bytes. This flexibility allows e.g. a connection pooler to add more
information to the cancel key, which might be useful for finding the
connection.
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Discussion: https://www.postgresql.org/message-id/508d0505-8b7a-4864-a681-e7e5edfe32aa@iki.fi
Even after reaching the minimum recovery point, if there are long-lived
write transactions with 64 subtransactions on the primary, the recovery
snapshot may not yet be ready for hot standby, delaying read-only
connections on the standby. Previously, when read-only connections were
not accepted due to this condition, the following error message was logged:
FATAL: the database system is not yet accepting connections
DETAIL: Consistent recovery state has not been yet reached.
This DETAIL message was misleading because the following message was
already logged in this case:
LOG: consistent recovery state reached
This contradiction, i.e., indicating that the recovery state was consistent
while also stating it wasn’t, caused confusion.
This commit improves the error message to better reflect the actual state:
FATAL: the database system is not yet accepting connections
DETAIL: Recovery snapshot is not yet ready for hot standby.
HINT: To enable hot standby, close write transactions with more than 64 subtransactions on the primary server.
To implement this, the commit introduces a new postmaster signal,
PMSIGNAL_RECOVERY_CONSISTENT. When the startup process reaches
a consistent recovery state, it sends this signal to the postmaster,
allowing it to correctly recognize that state.
Since this is not a clear bug, the change is applied only to the master
branch and is not back-patched.
Author: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/02db8cd8e1f527a8b999b94a4bee3165@oss.nttdata.com
check_createrole_self_grant and check_synchronized_standby_slots
were allocating memory on a LOG elevel without checking if the
allocation succeeded or not, which would have led to a segfault
on allocation failure.
On top of that, a number of callsites were using the ERROR level,
relying on erroring out rather than returning false to allow the
GUC machinery handle it gracefully. Other callsites used WARNING
instead of LOG. While neither being not wrong, this changes all
check_ functions do it consistently with LOG.
init_custom_variable gets a promoted elevel to FATAL to keep
the guc_malloc error handling in line with the rest of the
error handling in that function which already call FATAL. If
we encounter an OOM in this callsite there is no graceful
handling to be had, better to error out hard.
Backpatch the fix to check_createrole_self_grant down to v16
and the fix to check_synchronized_standby_slots down to v17
where they were introduced.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: Nikita <pm91.arapov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Bug: #18845
Discussion: https://postgr.es/m/18845-582c6e10247377ec@postgresql.org
Backpatch-through: 16
This field can be optionally set in a PlannedStmt through the planner
hook, giving extensions the possibility to assign an identifier related
to a computed plan. The backend is changed to report it in the backend
entry of a process running (including the extended query protocol), with
semantics and APIs to set or get it similar to what is used for the
existing query ID (introduced in the backend via 4f0b0966c8). The plan
ID is reset at the same timing as the query ID. Currently, this
information is not added to the system view pg_stat_activity; extensions
can access it through PgBackendStatus.
Some patches have been proposed to provide some features in the planning
area, where a plan identifier is used as a key to know the plan involved
(for statistics, plan storage and manipulations, etc.), and the point of
this commit is to provide an anchor in the backend that extensions can
rely on for future work. The reset of the plan identifier is
controlled by core and follows the same pattern as the query identifier
added in 4f0b0966c8.
The contents of this commit are extracted from a larger set proposed
originally by Lukas Fittl, that Sami Imseih has proposed as an
independent change, with a few tweaks sprinkled by me.
Author: Lukas Fittl <lukas@fittl.com>
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAP53Pkyow59ajFMHGpmb1BK9WHDypaWtUsS_5DoYUEfsa_Hktg@mail.gmail.com
Discussion: https://postgr.es/m/CAA5RZ0vyWd4r35uUBUmhngv8XqeiJUkJDDKkLf5LCoWxv-t_pw@mail.gmail.com
This commit contains the basic, system-wide, infrastructure for
io_method=worker. It does not yet actually execute IO, this commit just
provides the infrastructure for running IO workers, kept separate for easier
review.
The number of IO workers can be adjusted with a PGC_SIGHUP GUC. Eventually
we'd like to make the number of workers dynamically scale up/down based on the
current "IO load".
To allow the number of IO workers to be increased without a restart, we need
to reserve PGPROC entries for the workers unconditionally. This has been
judged to be worth the cost. If it turns out to be problematic, we can
introduce a PGC_POSTMASTER GUC to control the maximum number.
As io workers might be needed during shutdown, e.g. for AIO during the
shutdown checkpoint, a new PMState phase is added. IO workers are shut down
after the shutdown checkpoint has been performed and walsender/archiver have
shut down, but before the checkpointer itself shuts down. See also
87a6690cc6.
Updates PGSTAT_FILE_FORMAT_ID due to the addition of a new BackendType.
Reviewed-by: Noah Misch <noah@leadboat.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Discussion: https://postgr.es/m/20210223100344.llw5an2aklengrmn@alap3.anarazel.de
Discussion: https://postgr.es/m/stj36ea6yyhoxtqkhpieia2z4krnam7qyetc57rfezgk4zgapf@gcnactj4z56m
Modules can use RegisterExtensionExplainOption to register new
EXPLAIN options, and GetExplainExtensionId, GetExplainExtensionState,
and SetExplainExtensionState to store related state inside the
ExplainState object.
Since this substantially increases the amount of code that needs
to handle ExplainState-related tasks, move a few bits of existing
code to a new file explain_state.c and add the rest of this
infrastructure there.
See the comments at the top of explain_state.c for further
explanation of how this mechanism works.
This does not yet provide a way for such such options to do anything
useful. The intention is that we'll add hooks for that purpose in a
separate commit.
Discussion: http://postgr.es/m/CA+TgmoYSzg58hPuBmei46o8D3SKX+SZoO4K_aGQGwiRzvRApLg@mail.gmail.com
Reviewed-by: Srinath Reddy <srinath2133@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Add log_connections option 'setup_durations' which logs durations of
several key parts of connection establishment and backend setup.
For an incoming connection, starting from when the postmaster gets a
socket from accept() and ending when the forked child backend is first
ready for query, there are multiple steps that could each take longer
than expected due to external factors. This logging provides visibility
into authentication and fork duration as well as the end-to-end
connection establishment and backend initialization time.
To make this portable, the timings captured in the postmaster (socket
creation time, fork initiation time) are passed through the
BackendStartupData.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Guillaume Lelarge <guillaume.lelarge@dalibo.com>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
Convert the boolean log_connections GUC into a list GUC comprised of the
connection aspects to log.
This gives users more control over the volume and kind of connection
logging.
The current log_connections options are 'receipt', 'authentication', and
'authorization'. The empty string disables all connection logging. 'all'
enables all available connection logging.
For backwards compatibility, the most common values for the
log_connections boolean are still supported (on, off, 1, 0, true, false,
yes, no). Note that previously supported substrings of on, off, true,
false, yes, and no are no longer supported.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
The usual pattern for handling a signal is that the signal handler
sets a flag and calls SetLatch(MyLatch), and CHECK_FOR_INTERRUPTS() or
other code that is part of a wait loop calls another function to deal
with it. The naming of the functions involved was a bit inconsistent,
however. CHECK_FOR_INTERRUPTS() calls ProcessInterrupts() to do the
heavy-lifting, but the analogous functions in aux processes were
called HandleMainLoopInterrupts(), HandleStartupProcInterrupts(),
etc. Similarly, most subroutines of ProcessInterrupts() were called
Process*(), but some were called Handle*().
To make things less confusing, rename all the functions that are part
of the overall signal/interrupt handling system but are not executed
in a signal handler to e.g. ProcessSomething(), rather than
HandleSomething(). The "Process" prefix is now consistently used in
the non-signal-handler functions, and the "Handle" prefix in functions
that are part of signal handlers, except for some completely unrelated
functions that clearly have nothing to do with signal or interrupt
handling.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/8a384b26-1499-41f6-be33-64b801fb98b8@iki.fi
Before executing a cached generic plan, AcquireExecutorLocks() in
plancache.c locks all relations in a plan's range table to ensure the
plan is safe for execution. However, this locks runtime-prunable
relations that will later be pruned during "initial" runtime pruning,
introducing unnecessary overhead.
This commit defers locking for such relations to executor startup and
ensures that if the CachedPlan is invalidated due to concurrent DDL
during this window, replanning is triggered. Deferring these locks
avoids unnecessary locking overhead for pruned partitions, resulting
in significant speedup, particularly when many partitions are pruned
during initial runtime pruning.
* Changes to locking when executing generic plans:
AcquireExecutorLocks() now locks only unprunable relations, that is,
those found in PlannedStmt.unprunableRelids (introduced in commit
cbc127917e), to avoid locking runtime-prunable partitions
unnecessarily. The remaining locks are taken by
ExecDoInitialPruning(), which acquires them only for partitions that
survive pruning.
This deferral does not affect the locks required for permission
checking in InitPlan(), which takes place before initial pruning.
ExecCheckPermissions() now includes an Assert to verify that all
relations undergoing permission checks, none of which can be in the
set of runtime-prunable relations, are properly locked.
* Plan invalidation handling:
Deferring locks introduces a window where prunable relations may be
altered by concurrent DDL, invalidating the plan. A new function,
ExecutorStartCachedPlan(), wraps ExecutorStart() to detect and handle
invalidation caused by deferred locking. If invalidation occurs,
ExecutorStartCachedPlan() updates CachedPlan using the new
UpdateCachedPlan() function and retries execution with the updated
plan. To ensure all code paths that may be affected by this handle
invalidation properly, all callers of ExecutorStart that may execute a
PlannedStmt from a CachedPlan have been updated to use
ExecutorStartCachedPlan() instead.
UpdateCachedPlan() replaces stale plans in CachedPlan.stmt_list. A new
CachedPlan.stmt_context, created as a child of CachedPlan.context,
allows freeing old PlannedStmts while preserving the CachedPlan
structure and its statement list. This ensures that loops over
statements in upstream callers of ExecutorStartCachedPlan() remain
intact.
ExecutorStart() and ExecutorStart_hook implementations now return a
boolean value indicating whether plan initialization succeeded with a
valid PlanState tree in QueryDesc.planstate, or false otherwise, in
which case QueryDesc.planstate is NULL. Hook implementations are
required to call standard_ExecutorStart() at the beginning, and if it
returns false, they should do the same without proceeding.
* Testing:
To verify these changes, the delay_execution module tests scenarios
where cached plans become invalid due to changes in prunable relations
after deferred locks.
* Note to extension authors:
ExecutorStart_hook implementations must verify plan validity after
calling standard_ExecutorStart(), as explained earlier. For example:
if (prev_ExecutorStart)
plan_valid = prev_ExecutorStart(queryDesc, eflags);
else
plan_valid = standard_ExecutorStart(queryDesc, eflags);
if (!plan_valid)
return false;
<extension-code>
return true;
Extensions accessing child relations, especially prunable partitions,
via ExecGetRangeTableRelation() must now ensure their RT indexes are
present in es_unpruned_relids (introduced in commit cbc127917e), or
they will encounter an error. This is a strict requirement after this
change, as only relations in that set are locked.
The idea of deferring some locks to executor startup, allowing locks
for prunable partitions to be skipped, was first proposed by Tom Lane.
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: David Rowley <dgrowleyml@gmail.com> (earlier versions)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier versions)
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
Formerly we skipped this in bootstrap/check mode and in single-user
mode. That's bad in check mode because it may allow accepting a
value of max_connections that doesn't actually work: on platforms
where semaphores consume file descriptors, there may not be enough
free FDs left over to satisfy fd.c, causing postmaster start to
fail. It's also not great in single-user mode, because fd.c will
operate with just the minimum allowable value of max_safe_fds,
resulting in excess file open/close overhead if anything moderately
complicated is done in single-user mode. (There may be some penalty
for bootstrap mode too, though probably not much.)
Discussion: https://postgr.es/m/2081982.1734393311@sss.pgh.pa.us
Previously we did this in PostmasterMain() and InitPostmasterChild(),
which meant that stack depth checking was disabled in non-postmaster
server processes, for instance in single-user mode. That seems like
a fairly bad idea, since there's no a-priori restriction on the
complexity of queries we will run in single-user mode. Moreover, this
led to not having quite the same stack depth limit in all processes,
which likely has no real-world effect but it offends my inner neatnik.
Setting the depth in main() guarantees that check_stack_depth() is
armed and has a consistent interpretation of stack depth in all forms
of server processes.
While at it, move the code associated with checking the stack depth
out of tcop/postgres.c (which was never a great home for it) into
a new file src/backend/utils/misc/stack_depth.c.
Discussion: https://postgr.es/m/2081982.1734393311@sss.pgh.pa.us
This is simply done by pushing down the ParseState available in
ProcessUtility() to DefineDomain(), giving more information about the
position of an error when running a CREATE DOMAIN query.
Most of the queries impacted by this change have been added previously
in 0172b4c944.
Author: Kirill Reshke, Jian He
Reviewed-by: Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALdSSPhqfvKbDwqJaY=yEePi_aq61GmMpW88i6ZH7CMG_2Z4Cg@mail.gmail.com
This reverts commit 562bee0fc1.
We received a report from the field about this change in behavior,
so it seems best to revert this commit and to add proper
multibyte-aware truncation as a follow-up exercise.
Fixes bug #18711.
Reported-by: Adam Rauch
Reviewed-by: Tom Lane, Bertrand Drouvot, Bruce Momjian, Thomas Munro
Discussion: https://postgr.es/m/18711-7503ee3e449d2c47%40postgresql.org
Backpatch-through: 17
Our parallel-mode code only works when we are executing a query
in full, so ExecutePlan must disable parallel mode when it is
asked to do partial execution. The previous logic for this
involved passing down a flag (variously named execute_once or
run_once) from callers of ExecutorRun or PortalRun. This is
overcomplicated, and unsurprisingly some of the callers didn't
get it right, since it requires keeping state that not all of
them have handy; not to mention that the requirements for it were
undocumented. That led to assertion failures in some corner
cases. The only state we really need for this is the existing
QueryDesc.already_executed flag, so let's just put all the
responsibility in ExecutePlan. (It could have been done in
ExecutorRun too, leading to a slightly shorter patch -- but if
there's ever more than one caller of ExecutePlan, it seems better
to have this logic in the subroutine than the callers.)
This makes those ExecutorRun/PortalRun parameters unnecessary.
In master it seems okay to just remove them, returning the
API for those functions to what it was before parallelism.
Such an API break is clearly not okay in stable branches,
but for them we can just leave the parameters in place after
documenting that they do nothing.
Per report from Yugo Nagata, who also reviewed and tested
this patch. Back-patch to all supported branches.
Discussion: https://postgr.es/m/20241206062549.710dc01cf91224809dd6c0e1@sraoss.co.jp
Before this patch, misplacing a special must-be-first option for
dispatching to a subprogram (e.g., postgres -D . --single) would
fail with an error like
FATAL: --single requires a value
This patch adjusts this error to more accurately complain that the
special option wasn't listed first. The aforementioned error
message now looks like
FATAL: --single must be first argument
The dispatch option parsing code has been refactored for use
wherever ParseLongOption() is called. Beyond the obvious advantage
of avoiding code duplication, this should prevent similar problems
when new dispatch options are added. Note that we assume that none
of the dispatch option names match another valid command-line
argument, such as the name of a configuration parameter.
Ideally, we'd remove this must-be-first requirement for these
options, but after some investigation, we decided that wasn't worth
the added complexity and behavior changes.
Author: Nathan Bossart, Greg Sabino Mullane
Reviewed-by: Greg Sabino Mullane, Peter Eisentraut, Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/CAKAnmmJkZtZAiSryho%3DgYpbvC7H-HNjEDAh16F3SoC9LPu8rqQ%40mail.gmail.com
