The lexer's handling of operators contained an O(N^3) hazard when
dealing with long strings of + or - characters; it seems hard to
prevent this case from being O(N^2), but the additional N multiplier
was not needed.
Backpatch all the way since this has been there since 7.x, and it
presents at least a mild hazard in that trying to do Bind, PREPARE or
EXPLAIN on a hostile query could take excessive time (without
honouring cancels or timeouts) even if the query was never executed.
Fix a small number of places that were testing the result of snprintf()
but doing so incorrectly. The right test for buffer overrun, per C99,
is "result >= bufsize" not "result > bufsize". Some places were also
checking for failure with "result == -1", but the standard only says
that a negative value is delivered on failure.
(Note that this only makes these places correct if snprintf() delivers
C99-compliant results. But at least now these places are consistent
with all the other places where we assume that.)
Also, make psql_start_test() and isolation_start_test() check for
buffer overrun while constructing their shell commands. There seems
like a higher risk of overrun, with more severe consequences, here
than there is for the individual file paths that are made elsewhere
in the same functions, so this seemed like a worthwhile change.
Also fix guc.c's do_serialize() to initialize errno = 0 before
calling vsnprintf. In principle, this should be unnecessary because
vsnprintf should have set errno if it returns a failure indication ...
but the other two places this coding pattern is cribbed from don't
assume that, so let's be consistent.
These errors are all very old, so back-patch as appropriate. I think
that only the shell command overrun cases are even theoretically
reachable in practice, but there's not much point in erroneous error
checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
The logic in PQconnectPoll() did not take care to ensure that all of
a PGconn's internal state variables were reset before trying a new
connection attempt. If we got far enough in the connection sequence
to have changed any of these variables, and then decided to try a new
server address or server name, the new connection might be completed
with some state that really only applied to the failed connection.
While this has assorted bad consequences, the only one that is clearly
a security issue is that password_needed didn't get reset, so that
if the first server asked for a password and the second didn't,
PQconnectionUsedPassword() would return an incorrect result. This
could be leveraged by unprivileged users of dblink or postgres_fdw
to allow them to use server-side login credentials that they should
not be able to use.
Other notable problems include the possibility of forcing a v2-protocol
connection to a server capable of supporting v3, or overriding
"sslmode=prefer" to cause a non-encrypted connection to a server that
would have accepted an encrypted one. Those are certainly bugs but
it's harder to paint them as security problems in themselves. However,
forcing a v2-protocol connection could result in libpq having a wrong
idea of the server's standard_conforming_strings setting, which opens
the door to SQL-injection attacks. The extent to which that's actually
a problem, given the prerequisite that the attacker needs control of
the client's connection parameters, is unclear.
These problems have existed for a long time, but became more easily
exploitable in v10, both because it introduced easy ways to force libpq
to abandon a connection attempt at a late stage and then try another one
(rather than just giving up), and because it provided an easy way to
specify multiple target hosts.
Fix by rearranging PQconnectPoll's state machine to provide centralized
places to reset state properly when moving to a new target host or when
dropping and retrying a connection to the same host.
Tom Lane, reviewed by Noah Misch. Our thanks to Andrew Krasichkov
for finding and reporting the problem.
Security: CVE-2018-10915
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
Back-patch commit dddfc4cb2, which broke LDFLAGS and related Makefile
variables into two parts, one for within-build-tree library references and
one for external libraries, to ensure that the order of -L flags has all
of the former before all of the latter. This turns out to fix a problem
recently noted on buildfarm member peripatus, that we attempted to
incorporate code from libpgport.a into a shared library. That will fail on
platforms that are sticky about putting non-PIC code into shared libraries.
(It's quite surprising we hadn't seen such failures before, since the code
in question has been like that for a long time.)
I think that peripatus' problem could have been fixed with just a subset
of this patch; but since the previous issue of accidentally linking to the
wrong copy of a Postgres shlib seems likely to bite people in the field,
let's just back-patch the whole change. Now that commit dddfc4cb2 has
survived some beta testing, I'm less afraid to back-patch it than I was
at the time.
This also fixes undesired inclusion of "-DFRONTEND" in pg_config's CPPFLAGS
output (in 9.6 and up) and undesired inclusion of "-L../../src/common" in
its LDFLAGS output (in all supported branches).
Back-patch to v10 and older branches; this is already in v11.
Discussion: https://postgr.es/m/20180704234304.bq2dxispefl65odz@ler-imac.local
On Windows, it is sometimes important for corresponding malloc() and
free() calls to be made from the same DLL, since some build options can
result in multiple allocators being active at the same time. For that
reason we already provided PQfreemem(). This commit adds a similar
function for freeing string results allocated by the pgtypes library.
Author: Takayuki Tsunakawa
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8AD5D6%40G01JPEXMBYT05
Use of strncpy with a length limit based on the source, rather than
the destination, is non-idiomatic and draws warnings from gcc 8.
Replace with memcpy, which does exactly the same thing in these cases,
but with less chance for confusion.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/21789.1529170195@sss.pgh.pa.us
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
This will only actually exercise the "long long" code paths on platforms
where "long" is 32 bits --- otherwise, the SQL bigint type maps to
plain "long", and we will test that code path instead. But that's
probably sufficient coverage, and anyway we weren't testing either
code path before.
Dang Minh Huong, tweaked a bit by me
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
We'd throw away the partial result anyway after parsing the error message.
Throwing it away beforehand costs nothing and reduces the risk of
out-of-memory failure. Also, at least in systems that behave like
glibc/Linux, if the partial result was very large then the error PGresult
would get allocated at high heap addresses, preventing the heap storage
used by the partial result from being released to the OS until the error
PGresult is freed.
In psql >= 9.6, we hold onto the error PGresult until another error is
received (for \errverbose), so that this behavior causes a seeming
memory leak to persist for awhile, as in a recent complaint from
Darafei Praliaskouski. This is a potential performance regression from
older versions, justifying back-patching at least that far. But similar
behavior may occur in other client applications, so it seems worth just
back-patching to all supported branches.
Discussion: https://postgr.es/m/CAC8Q8tJ=7cOkPePyAbJE_Pf691t8nDFhJp0KZxHvnq_uicfyVg@mail.gmail.com
For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.1521668179@sss.pgh.pa.us
This suite had been a proper superset of the regular ecpg test suite,
but the three newest tests didn't reach it. To make this less likely to
recur, delete the extra schedule file and pass the TCP-specific test on
the command line. Back-patch to 9.3 (all supported versions).
Since commit 868898739a, it has assumed
"localhost" resolves to both ::1 and 127.0.0.1. We gain nothing from
that assumption, and it does not hold in a default installation of Red
Hat Enterprise Linux 5. Back-patch to 9.3 (all supported versions).
isdigit(), isspace(), etc are likely to give surprising results if passed a
signed char. We should always cast the argument to unsigned char to avoid
that. Error in commit 63d6b97fd, found by buildfarm member gaur.
Back-patch to 9.3, like that commit.
Some people like to run libpq-using applications in environments where
there's no home directory. We've broken that scenario before (cf commits
5b4067798 and bd58d9d88), and commit ba005f193 broke it again, by making
it a hard error if we fail to get the home directory name while looking
for ~/.pgpass. The previous precedent is that if we can't get the home
directory name, we should just silently act as though the file we hoped
to find there doesn't exist. Rearrange the new code to honor that.
Looking around, the service-file code added by commit 41a4e4595 had the
same disease. Apparently, that escaped notice because it only runs when
a service name has been specified, which I guess the people who use this
scenario don't do. Nonetheless, it's wrong too, so fix that case as well.
Add a comment about this policy to pqGetHomeDirectory, in the probably
vain hope of forestalling the same error in future. And upgrade the
rather miserable commenting in parseServiceInfo, too.
In passing, also back off parseServiceInfo's assumption that only ENOENT
is an ignorable error from stat() when checking a service file. We would
need to ignore at least ENOTDIR as well (cf 5b4067798), and seeing that
the far-better-tested code for ~/.pgpass treats all stat() failures alike,
I think this code ought to as well.
Per bug #14872 from Dan Watson. Back-patch the .pgpass change to v10
where ba005f193 came in. The service-file bugs are far older, so
back-patch the other changes to all supported branches.
Discussion: https://postgr.es/m/20171025200457.1471.34504@wrigleys.postgresql.org
Adding more than 1 billion rows to a PGresult would overflow its ntups and
tupArrSize fields, leading to client crashes. It'd be desirable to use
wider fields on 64-bit machines, but because all of libpq's external APIs
use plain "int" for row counters, that's going to be hard to accomplish
without an ABI break. Given the lack of complaints so far, and the general
pain that would be involved in using such huge PGresults, let's settle for
just preventing the overflow and reporting a useful error message if it
does happen. Also, for a couple more lines of code we can increase the
threshold of trouble from INT_MAX/2 to INT_MAX rows.
To do that, refactor pqAddTuple() to allow returning an error message that
replaces the default assumption that it failed because of out-of-memory.
Along the way, fix PQsetvalue() so that it reports all failures via
pqInternalNotice(). It already did so in the case of bad field number,
but neglected to report anything for other error causes.
Because of the potential for crashes, this seems like a back-patchable
bug fix, despite the lack of field reports.
Michael Paquier, per a complaint from Igor Korot.
Discussion: https://postgr.es/m/CA+FnnTxyLWyjY1goewmJNxC==HQCCF4fKkoCTa9qR36oRAHDPw@mail.gmail.com
Buildfarm evidence shows that TCP_KEEPALIVE_THRESHOLD doesn't exist
after all on Solaris < 11. This means we need to take positive action to
prevent the TCP_KEEPALIVE code path from being taken on that platform.
I've chosen to limit it with "&& defined(__darwin__)", since it's unclear
that anyone else would follow Apple's precedent of spelling the symbol
that way.
Also, follow a suggestion from Michael Paquier of eliminating code
duplication by defining a couple of intermediate symbols for the
socket option.
In passing, make some effort to reduce the number of translatable messages
by replacing "setsockopt(foo) failed" with "setsockopt(%s) failed", etc,
throughout the affected files. And update relevant documentation so
that it doesn't claim to provide an exhaustive list of the possible
socket option names.
Like the previous commit (f0256c774), back-patch to all supported branches.
Discussion: https://postgr.es/m/20170627163757.25161.528@wrigleys.postgresql.org
Turns out that the socket option for this is named TCP_KEEPALIVE_THRESHOLD,
at least according to the tcp(7P) man page for Solaris 11. (But since that
text refers to "SunOS", it's likely pretty ancient.) It appears that the
symbol TCP_KEEPALIVE does get defined on that platform, but it doesn't
seem to represent a valid protocol-level socket option. This leads to
bleats in the postmaster log, and no tcp_keepalives_idle functionality.
Per bug #14720 from Andrey Lizenko, as well as an earlier report from
Dhiraj Chawla that nobody had followed up on. The issue's been there
since we added the TCP_KEEPALIVE code path in commit 5acd417c8, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/20170627163757.25161.528@wrigleys.postgresql.org
If authentication over an SSL connection fails, with sslmode=prefer,
libpq will reconnect without SSL and retry. However, we did not clear
the variables related to GSS, SSPI, and SASL authentication state, when
reconnecting. Because of that, the second authentication attempt would
always fail with a "duplicate GSS/SASL authentication request" error.
pg_SSPI_startup did not check for duplicate authentication requests like
the corresponding GSS and SASL functions, so with SSPI, you would leak
some memory instead.
Another way this could manifest itself, on version 10, is if you list
multiple hostnames in the "host" parameter. If the first server requests
Kerberos or SCRAM authentication, but it fails, the attempts to connect to
the other servers will also fail with "duplicate authentication request"
errors.
To fix, move the clearing of authentication state from closePGconn to
pgDropConnection, so that it is cleared also when re-connecting.
Patch by Michael Paquier, with some kibitzing by me.
Backpatch down to 9.3. 9.2 has the same bug, but the code around closing
the connection is somewhat different, so that this patch doesn't apply.
To fix this in 9.2, I think we would need to back-port commit 210eb9b743
first, and then apply this patch. However, given that we only bumped into
this in our own testing, we haven't heard any reports from users about
this, and that 9.2 will be end-of-lifed in a couple of months anyway, it
doesn't seem worth the risk and trouble.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRuOUm0MyJaUy9L3eXYJU3AKCZ-0-03=-aDTZJGV4GyWw@mail.gmail.com
Commit 65c3bf19fd moved handling of the,
already then, deprecated requiressl parameter into conninfo_storeval().
The default PGREQUIRESSL environment variable was however lost in the
change resulting in a potentially silent accept of a non-SSL connection
even when set. Its documentation remained. Restore its implementation.
Also amend the documentation to mark PGREQUIRESSL as deprecated for
those not following the link to requiressl. Back-patch to 9.3, where
commit 65c3bf1 first appeared.
Behavior has been more complex when the user provides both deprecated
and non-deprecated settings. Before commit 65c3bf1, libpq operated
according to the first of these found:
requiressl=1
PGREQUIRESSL=1
sslmode=*
PGSSLMODE=*
(Note requiressl=0 didn't override sslmode=*; it would only suppress
PGREQUIRESSL=1 or a previous requiressl=1. PGREQUIRESSL=0 had no effect
whatsoever.) Starting with commit 65c3bf1, libpq ignored PGREQUIRESSL,
and order of precedence changed to this:
last of requiressl=* or sslmode=*
PGSSLMODE=*
Starting now, adopt the following order of precedence:
last of requiressl=* or sslmode=*
PGSSLMODE=*
PGREQUIRESSL=1
This retains the 65c3bf1 behavior for connection strings that contain
both requiressl=* and sslmode=*. It retains the 65c3bf1 change that
either connection string option overrides both environment variables.
For the first time, PGSSLMODE has precedence over PGREQUIRESSL; this
avoids reducing security of "PGREQUIRESSL=1 PGSSLMODE=verify-full"
configurations originating under v9.3 and later.
Daniel Gustafsson
Security: CVE-2017-7485
