Parallel SELECT can't be utilized for INSERT in the following cases:
- INSERT statement uses the ON CONFLICT DO UPDATE clause
- Target table has a parallel-unsafe: trigger, index expression or
predicate, column default expression or check constraint
- Target table has a parallel-unsafe domain constraint on any column
- Target table is a partitioned table with a parallel-unsafe partition key
expression or support function
The planner is updated to perform additional parallel-safety checks for
the cases listed above, for determining whether it is safe to run INSERT
in parallel-mode with an underlying parallel SELECT. The planner will
consider using parallel SELECT for "INSERT INTO ... SELECT ...", provided
nothing unsafe is found from the additional parallel-safety checks, or
from the existing parallel-safety checks for SELECT.
While checking parallel-safety, we need to check it for all the partitions
on the table which can be costly especially when we decide not to use a
parallel plan. So, in a separate patch, we will introduce a GUC and or a
reloption to enable/disable parallelism for Insert statements.
Prior to entering parallel-mode for the execution of INSERT with parallel
SELECT, a TransactionId is acquired and assigned to the current
transaction state. This is necessary to prevent the INSERT from attempting
to assign the TransactionId whilst in parallel-mode, which is not allowed.
This approach has a disadvantage in that if the underlying SELECT does not
return any rows, then the TransactionId is not used, however that
shouldn't happen in practice in many cases.
Author: Greg Nancarrow, Amit Langote, Amit Kapila
Reviewed-by: Amit Langote, Hou Zhijie, Takayuki Tsunakawa, Antonin Houska, Bharath Rupireddy, Dilip Kumar, Vignesh C, Zhihong Yu, Amit Kapila
Tested-by: Tang, Haiying
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
If a cross-partition UPDATE violates a constraint on the target partition,
and the columns in the new partition are in different physical order than
in the parent, the error message can reveal columns that the user does not
have SELECT permission on. A similar bug was fixed earlier in commit
804b6b6db4.
The cause of the bug is that the callers of the
ExecBuildSlotValueDescription() function got confused when constructing
the list of modified columns. If the tuple was routed from a parent, we
converted the tuple to the parent's format, but the list of modified
columns was grabbed directly from the child's RTE entry.
ExecUpdateLockMode() had a similar issue. That lead to confusion on which
columns are key columns, leading to wrong tuple lock being taken on tables
referenced by foreign keys, when a row is updated with INSERT ON CONFLICT
UPDATE. A new isolation test is added for that corner case.
With this patch, the ri_RangeTableIndex field is no longer set for
partitions that don't have an entry in the range table. Previously, it was
set to the RTE entry of the parent relation, but that was confusing.
NOTE: This modifies the ResultRelInfo struct, replacing the
ri_PartitionRoot field with ri_RootResultRelInfo. That's a bit risky to
backpatch, because it breaks any extensions accessing the field. The
change that ri_RangeTableIndex is not set for partitions could potentially
break extensions, too. The ResultRelInfos are visible to FDWs at least,
and this patch required small changes to postgres_fdw. Nevertheless, this
seem like the least bad option. I don't think these fields widely used in
extensions; I don't think there are FDWs out there that uses the FDW
"direct update" API, other than postgres_fdw. If there is, you will get a
compilation error, so hopefully it is caught quickly.
Backpatch to 11, where support for both cross-partition UPDATEs, and unique
indexes on partitioned tables, were added.
Reviewed-by: Amit Langote
Security: CVE-2021-3393
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
Thinko in commit 1375422c782. EvalPlanQualStart() was mistakenly
resetting the parent EState's es_result_relations, when it should
initialize the field in the child EPQ EState it just created.
That was clearly wrong, but it didn't cause any ill effects, because
es_result_relations is currently not used after the ExecInit* phase.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqFEuq8AAAmxXsTDVZ1r38cHbfYuiPQx_%3DYyKe2DC-6q4A%40mail.gmail.com
Store the tuple conversion map to convert a tuple from a child table's
format to the root format in a new ri_ChildToRootMap field in
ResultRelInfo. It is initialized if transition tuple capture for FOR
STATEMENT triggers or INSERT tuple routing on a partitioned table is
needed. Previously, ModifyTable kept the maps in the per-subplan
ModifyTableState->mt_per_subplan_tupconv_maps array, or when tuple
routing was used, in
ResultRelInfo->ri_Partitioninfo->pi_PartitionToRootMap. The new field
replaces both of those.
Now that the child-to-root tuple conversion map is always available in
ResultRelInfo (when needed), remove the TransitionCaptureState.tcs_map
field. The callers of Exec*Trigger() functions no longer need to set or
save it, which is much less confusing and bug-prone. Also, as a future
optimization, this will allow us to delay creating the map for a given
result relation until the relation is actually processed during
execution.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqHtCWLdK-LO%3DNEsvOdHx%2B7yv4mE_zYK0i3BH7dXb-wxog%40mail.gmail.com
Maintaining 'es_result_relation_info' correctly at all times has become
cumbersome, especially with partitioning where each partition gets its
own result relation info. Having to set and reset it across arbitrary
operations has caused bugs in the past.
This changes all the places that used 'es_result_relation_info', to
receive the currently active ResultRelInfo via function parameters
instead.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
Instead of allocating all the ResultRelInfos upfront in one big array,
allocate them in ExecInitModifyTable(). es_result_relations is now an
array of ResultRelInfo pointers, rather than an array of structs, and it
is indexed by the RT index.
This simplifies things: we get rid of the separate concept of a "result
rel index", and don't need to set it in setrefs.c anymore. This also
allows follow-up optimizations (not included in this commit yet) to skip
initializing ResultRelInfos for target relations that were not needed at
runtime, and removal of the es_result_relation_info pointer.
The EState arrays of regular result rels and root result rels are merged
into one array. Similarly, the resultRelations and rootResultRelations
lists in PlannedStmt are merged into one. It's not actually clear to me
why they were kept separate in the first place, but now that the
es_result_relations array is indexed by RT index, it certainly seems
pointless.
The PlannedStmt->resultRelations list is now only needed for
ExecRelationIsTargetRelation(). One visible effect of this change is that
ExecRelationIsTargetRelation() will now return 'true' also for the
partition root, if a partitioned table is updated. That seems like a good
thing, although the function isn't used in core code, and I don't see any
reason for an FDW to call it on a partition root.
Author: Amit Langote
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
Since there is only one place that actually needs the partition check
expression, namely ExecPartitionCheck, it's better to fetch it from
the relcache there. In this way we will never fetch it at all if
the query never has use for it, and we still fetch it just once when
we do need it.
The reason for taking an interest in this is that if the relcache
doesn't already have the check expression cached, fetching it
requires obtaining AccessShareLock on the partition root. That
means that operations that look like they should only touch the
partition itself will also take a lock on the root. In particular
we observed that TRUNCATE on a partition may take a lock on the
partition's root, contributing to a deadlock situation in parallel
pg_restore.
As written, this patch does have a small cost, which is that we
are microscopically reducing efficiency for the case where a partition
has an empty check expression. ExecPartitionCheck will be called,
and will go through the motions of setting up and checking an empty
qual, where before it would not have been called at all. We could
avoid that by adding a separate boolean flag to track whether there
is a partition expression to test. However, this case only arises
for a default partition with no siblings, which surely is not an
interesting case in practice. Hence adding complexity for it
does not seem like a good trade-off.
Amit Langote, per a suggestion by me
Discussion: https://postgr.es/m/VI1PR03MB31670CA1BD9625C3A8C5DD05EB230@VI1PR03MB3167.eurprd03.prod.outlook.com
All errors of SQLSTATE class 23 should include the name of an object
associated with the error in separate fields of the error report message.
We do this so that applications need not try to extract them from the
possibly-localized human-readable text of the message.
Reported-by: Chris Bandy
Author: Chris Bandy
Reviewed-by: Amit Kapila and Amit Langote
Discussion: https://postgr.es/m/0aa113a3-3c7f-db48-bcd8-f9290b2269ae@gmail.com
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
EvalPlanQualStart() supposed that it could re-use the relsubs_rowmark
and relsubs_done arrays from a prior instantiation. But since they are
allocated in the es_query_cxt of the recheckestate, that's just wrong;
EvalPlanQualEnd() will blow away that storage. Therefore we were using
storage that could have been reallocated to something else, causing all
sorts of havoc.
I think this was modeled on the old code's handling of es_epqTupleSlot,
but since the code was anyway clearing the arrays at re-use, there's
clearly no expectation of importing any outside state. So it's just
a dubious savings of a couple of pallocs, which is negligible compared
to setting up a new planstate tree. Therefore, just allocate the
arrays always. (I moved the allocations slightly for readability.)
In principle this bug could cause a problem whenever EPQ rechecks are
needed in more than one target table of a ModifyTable plan node.
In practice it seems not quite so easy to trigger as that; I couldn't
readily duplicate a crash with a partitioned target table, for instance.
That's probably down to incidental choices about when to free or
reallocate stuff. The added isolation test case does seem to reliably
show an assertion failure, though.
Per report from Oleksii Kliukin. Back-patch to v12 where the bug was
introduced (evidently by commit 3fb307bc4).
Discussion: https://postgr.es/m/EEF05F66-2871-4786-992B-5F45C92FEE2E@hintbits.com
This gives more information to the user about the error and it makes such
messages consistent with the other similar messages in the code.
Reported-by: Simon Riggs
Author: Mahendra Singh and Simon Riggs
Reviewed-by: Beena Emerson and Amit Kapila
Discussion: https://postgr.es/m/CANP8+j+7YUvQvGxTrCiw77R23enMJ7DFmyA3buR+fa2pKs4XhA@mail.gmail.com
A view with conditional INSTEAD rules and no unconditional INSTEAD
rules or INSTEAD OF triggers is not auto-updatable. Previously we
relied on a check in the executor to catch this, but that's
problematic since the planner may fail to properly handle such a query
and thus return a particularly unhelpful error to the user, before
reaching the executor check.
Instead, trap this in the rewriter and report the correct error there.
Doing so also allows us to include more useful error detail than the
executor check can provide. This doesn't change the existing behaviour
of updatable views; it merely ensures that useful error messages are
reported when a view isn't updatable.
Per report from Pengzhou Tang, though not adopting that suggested fix.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAG4reAQn+4xB6xHJqWdtE0ve_WqJkdyCV4P=trYr4Kn8_3_PEA@mail.gmail.com
Tuple conversion support in tupconvert.c is able to convert rowtypes
between two relations, inner and outer, which are logically equivalent
but have a different ordering or even dropped columns (used mainly for
inheritance tree and partitions). This makes use of attribute mappings,
which are simple arrays made of AttrNumber elements with a length
matching the number of attributes of the outer relation. The length of
the attribute mapping has been treated as completely independent of the
mapping itself until now, making it easy to pass down an incorrect
mapping length.
This commit refactors the code related to attribute mappings and moves
it into an independent facility called attmap.c, extracted from
tupconvert.c. This merges the attribute mapping with its length,
avoiding to try to guess what is the length of a mapping to use as this
is computed once, when the map is built.
This will avoid mistakes like what has been fixed in dc816e58, which has
used an incorrect mapping length by matching it with the number of
attributes of an inner relation (a child partition) instead of an outer
relation (a partitioned table).
Author: Michael Paquier
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/20191121042556.GD153437@paquier.xyz
Call ExecShutdownNode() after ExecutePlan()'s loop, rather than at each
break. We had forgotten to do that in one case. The omission caused
intermittent "temporary file leak" warnings from multi-batch parallel
hash joins with a LIMIT clause.
Back-patch to 11. Though the problem exists in theory in earlier
parallel query releases, nothing really depended on it.
Author: Kyotaro Horiguchi
Reviewed-by: Thomas Munro, Amit Kapila
Discussion: https://postgr.es/m/20191111.212418.2222262873417235945.horikyota.ntt%40gmail.com
In ad0bda5d24ea I changed the EvalPlanQual machinery to store
substitution tuples in slot, instead of using plain HeapTuples. The
main motivation for that was that using HeapTuples will be inefficient
for future tableams. But it turns out that that conversion was buggy
for non-locking rowmarks - the wrong tuple descriptor was used to
create the slot.
As a secondary issue 5db6df0c0 changed ExecLockRows() to begin EPQ
earlier, to allow to fetch the locked rows directly into the EPQ
slots, instead of having to copy tuples around. Unfortunately, as Tom
complained, that forces some expensive initialization to happen
earlier.
As a third issue, the test coverage for EPQ was clearly insufficient.
Fixing the first issue is unfortunately not trivial: Non-locked row
marks were fetched at the start of EPQ, and we don't have the type
information for the rowmarks available at that point. While we could
change that, it's not easy. It might be worthwhile to change that at
some point, but to fix this bug, it seems better to delay fetching
non-locking rowmarks when they're actually needed, rather than
eagerly. They're referenced at most once, and in cases where EPQ
fails, might never be referenced. Fetching them when needed also
increases locality a bit.
To be able to fetch rowmarks during execution, rather than
initialization, we need to be able to access the active EPQState, as
that contains necessary data. To do so move EPQ related data from
EState to EPQState, and, only for EStates creates as part of EPQ,
reference the associated EPQState from EState.
To fix the second issue, change EPQ initialization to allow use of
EvalPlanQualSlot() to be used before EvalPlanQualBegin() (but
obviously still requiring EvalPlanQualInit() to have been done).
As these changes made struct EState harder to understand, e.g. by
adding multiple EStates, significantly reorder the members, and add a
lot more comments.
Also add a few more EPQ tests, including one that fails for the first
issue above. More is needed.
Reported-By: yi huang
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion:
https://postgr.es/m/CAHU7rYZo_C4ULsAx_LAj8az9zqgrD8WDd4hTegDTMM1LMqrBsg@mail.gmail.comhttps://postgr.es/m/24530.1562686693@sss.pgh.pa.us
Backpatch: 12-, where the EPQ changes were introduced
The message was included as a parameter when this function was added in
dcb2bda9b704, but I don't think it has ever served any useful purpose.
Let's stop spreading it pointlessly.
Reviewed by Amit Langote and Peter Eisentraut.
Discussion: https://postgr.es/m/20190806224728.GA17233@alvherre.pgsql
Now that list_nth is O(1), there's no good reason to maintain a
separate array of RTE pointers rather than indexing into
estate->es_range_table. Deleting the array doesn't save all that
much either; but just on cleanliness grounds, it's better not to
have duplicate representations of the identical information.
Discussion: https://postgr.es/m/14960.1565384592@sss.pgh.pa.us
When we already know the length that we're going to append, then it
makes sense to use appendBinaryStringInfo instead of
appendStringInfoString so that the append can be performed with a simple
memcpy() using a known length rather than having to first perform a
strlen() call to obtain the length.
Discussion: https://postgr.es/m/CAKJS1f8+FRAM1s5+mAa3isajeEoAaicJ=4e0WzrH3tAusbbiMQ@mail.gmail.com
Some of the wrapper functions didn't match the callback names. Many of
them due to staying "consistent" with historic naming of the wrapped
functionality. We decided that for most cases it's more important to
be for tableam to be consistent going forward, than with the past.
The one exception is beginscan/endscan/... because it'd have looked
odd to have systable_beginscan/endscan/... with a different naming
scheme, and changing the systable_* APIs would have caused way too
much churn (including breaking a lot of external users).
Author: Ashwin Agrawal, with some small additions by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CALfoeiugyrXZfX7n0ORCa4L-m834dzmaE8eFdbNR6PMpetU4Ww@mail.gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
This adds table_multi_insert(), and converts COPY FROM, the only user
of heap_multi_insert, to it.
A simple conversion of COPY FROM use slots would have yielded a
slowdown when inserting into a partitioned table for some
workloads. Different partitions might need different slots (both slot
types and their descriptors), and dropping / creating slots when
there's constant partition changes is measurable.
Thus instead revamp the COPY FROM buffering for partitioned tables to
allow to buffer inserts into multiple tables, flushing only when
limits are reached across all partition buffers. By only dropping
slots when there've been inserts into too many different partitions,
the aforementioned overhead is gone. By allowing larger batches, even
when there are frequent partition changes, we actuall speed such cases
up significantly.
By using slots COPY of very narrow rows into unlogged / temporary
might slow down very slightly (due to the indirect function calls).
Author: David Rowley, Andres Freund, Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20190327054923.t3epfuewxfqdt22e@alap3.anarazel.de
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
This is essentially the tableam version of heapam_fetch(),
i.e. fetching a tuple identified by a tid, performing visibility
checks.
Note that this different from table_index_fetch_tuple(), which is for
index lookups. It therefore has to handle a tid pointing to an earlier
version of a tuple if the AM uses an optimization like heap's HOT. Add
comments to that end.
This commit removes the stats_relation argument from heap_fetch, as
it's been unused for a long time.
Author: Andres Freund
Reviewed-By: Haribabu Kommi
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This adds new, required, table AM callbacks for insert/delete/update
and lock_tuple. To be able to reasonably use those, the EvalPlanQual
mechanism had to be adapted, moving more logic into the AM.
Previously both delete/update/lock call-sites and the EPQ mechanism had
to have awareness of the specific tuple format to be able to fetch the
latest version of a tuple. Obviously that needs to be abstracted
away. To do so, move the logic that find the latest row version into
the AM. lock_tuple has a new flag argument,
TUPLE_LOCK_FLAG_FIND_LAST_VERSION, that forces it to lock the last
version, rather than the current one. It'd have been possible to do
so via a separate callback as well, but finding the last version
usually also necessitates locking the newest version, making it
sensible to combine the two. This replaces the previous use of
EvalPlanQualFetch(). Additionally HeapTupleUpdated, which previously
signaled either a concurrent update or delete, is now split into two,
to avoid callers needing AM specific knowledge to differentiate.
The move of finding the latest row version into tuple_lock means that
encountering a row concurrently moved into another partition will now
raise an error about "tuple to be locked" rather than "tuple to be
updated/deleted" - which is accurate, as that always happens when
locking rows. While possible slightly less helpful for users, it seems
like an acceptable trade-off.
As part of this commit HTSU_Result has been renamed to TM_Result, and
its members been expanded to differentiated between updating and
deleting. HeapUpdateFailureData has been renamed to TM_FailureData.
The interface to speculative insertion is changed so nodeModifyTable.c
does not have to set the speculative token itself anymore. Instead
there's a version of tuple_insert, tuple_insert_speculative, that
performs the speculative insertion (without requiring a flag to signal
that fact), and the speculative insertion is either made permanent
with table_complete_speculative(succeeded = true) or aborted with
succeeded = false).
Note that multi_insert is not yet routed through tableam, nor is
COPY. Changing multi_insert requires changes to copy.c that are large
enough to better be done separately.
Similarly, although simpler, CREATE TABLE AS and CREATE MATERIALIZED
VIEW are also only going to be adjusted in a later commit.
Author: Andres Freund and Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20190313003903.nwvrxi7rw3ywhdel@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
Too allow table accesses to be not directly dependent on heap, several
new abstractions are needed. Specifically:
1) Heap scans need to be generalized into table scans. Do this by
introducing TableScanDesc, which will be the "base class" for
individual AMs. This contains the AM independent fields from
HeapScanDesc.
The previous heap_{beginscan,rescan,endscan} et al. have been
replaced with a table_ version.
There's no direct replacement for heap_getnext(), as that returned
a HeapTuple, which is undesirable for a other AMs. Instead there's
table_scan_getnextslot(). But note that heap_getnext() lives on,
it's still used widely to access catalog tables.
This is achieved by new scan_begin, scan_end, scan_rescan,
scan_getnextslot callbacks.
2) The portion of parallel scans that's shared between backends need
to be able to do so without the user doing per-AM work. To achieve
that new parallelscan_{estimate, initialize, reinitialize}
callbacks are introduced, which operate on a new
ParallelTableScanDesc, which again can be subclassed by AMs.
As it is likely that several AMs are going to be block oriented,
block oriented callbacks that can be shared between such AMs are
provided and used by heap. table_block_parallelscan_{estimate,
intiialize, reinitialize} as callbacks, and
table_block_parallelscan_{nextpage, init} for use in AMs. These
operate on a ParallelBlockTableScanDesc.
3) Index scans need to be able to access tables to return a tuple, and
there needs to be state across individual accesses to the heap to
store state like buffers. That's now handled by introducing a
sort-of-scan IndexFetchTable, which again is intended to be
subclassed by individual AMs (for heap IndexFetchHeap).
The relevant callbacks for an AM are index_fetch_{end, begin,
reset} to create the necessary state, and index_fetch_tuple to
retrieve an indexed tuple. Note that index_fetch_tuple
implementations need to be smarter than just blindly fetching the
tuples for AMs that have optimizations similar to heap's HOT - the
currently alive tuple in the update chain needs to be fetched if
appropriate.
Similar to table_scan_getnextslot(), it's undesirable to continue
to return HeapTuples. Thus index_fetch_heap (might want to rename
that later) now accepts a slot as an argument. Core code doesn't
have a lot of call sites performing index scans without going
through the systable_* API (in contrast to loads of heap_getnext
calls and working directly with HeapTuples).
Index scans now store the result of a search in
IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the
target is not generally a HeapTuple anymore that seems cleaner.
To be able to sensible adapt code to use the above, two further
callbacks have been introduced:
a) slot_callbacks returns a TupleTableSlotOps* suitable for creating
slots capable of holding a tuple of the AMs
type. table_slot_callbacks() and table_slot_create() are based
upon that, but have additional logic to deal with views, foreign
tables, etc.
While this change could have been done separately, nearly all the
call sites that needed to be adapted for the rest of this commit
also would have been needed to be adapted for
table_slot_callbacks(), making separation not worthwhile.
b) tuple_satisfies_snapshot checks whether the tuple in a slot is
currently visible according to a snapshot. That's required as a few
places now don't have a buffer + HeapTuple around, but a
slot (which in heap's case internally has that information).
Additionally a few infrastructure changes were needed:
I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now
internally uses a slot to keep track of tuples. While
systable_getnext() still returns HeapTuples, and will so for the
foreseeable future, the index API (see 1) above) now only deals with
slots.
The remainder, and largest part, of this commit is then adjusting all
scans in postgres to use the new APIs.
Author: Andres Freund, Haribabu Kommi, Alvaro Herrera
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
For the upcoming pluggable table access methods it's quite
inconvenient to store tuples as HeapTuples, as that'd require
converting tuples from a their native format into HeapTuples. Instead
use slots to manage epq tuples.
To fit into that scheme, change the foreign data wrapper callback
RefetchForeignRow, to store the tuple in a slot. Insist on using the
caller provided slot, so it conveniently can be stored in the
corresponding EPQ slot. As there is no in core user of
RefetchForeignRow, that change was done blindly, but we plan to test
that soon.
To avoid duplicating that work for row locks, move row locks to just
directly use the EPQ slots - it previously temporarily stored tuples
in LockRowsState.lr_curtuples, but that doesn't seem beneficial, given
we'd possibly end up with a significant number of additional slots.
The behaviour of es_epqTupleSet[rti -1] is now checked by
es_epqTupleSlot[rti -1] != NULL, as that is distinguishable from a
slot containing an empty tuple.
Author: Andres Freund, Haribabu Kommi, Ashutosh Bapat
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
In preparation for abstracting table storage, convert trigger.c to
track tuples in slots. Which also happens to make code calling
triggers simpler.
As the calling interface for triggers themselves is not changed in
this patch, HeapTuples still are extracted from the slot at that
time. But that's handled solely inside trigger.c, not visible to
callers. It's quite likely that we'll want to revise the external
trigger interface, but that's a separate large project.
As part of this work the slots used for old/new/return tuples are
moved from EState into ResultRelInfo, as different updated tables
might need different slots. The slots are now also now created
on-demand, which is good both from an efficiency POV, but also makes
the modifying code simpler.
Author: Andres Freund, Amit Khandekar and Ashutosh Bapat
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
Most of these had been obsoleted by 568d4138c / the SnapshotNow
removal.
This is is preparation for moving most of tqual.[ch] into either
snapmgr.h or heapam.h, which in turn is in preparation for pluggable
table AMs.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
heapam.h previously was included in a number of widely used
headers (e.g. execnodes.h, indirectly in executor.h, ...). That's
problematic on its own, as heapam.h contains a lot of low-level
details that don't need to be exposed that widely, but becomes more
problematic with the upcoming introduction of pluggable table storage
- it seems inappropriate for heapam.h to be included that widely
afterwards.
heapam.h was largely only included in other headers to get the
HeapScanDesc typedef (which was defined in heapam.h, even though
HeapScanDescData is defined in relscan.h). The better solution here
seems to be to just use the underlying struct (forward declared where
necessary). Similar for BulkInsertState.
Another problem was that LockTupleMode was used in executor.h - parts
of the file tried to cope without heapam.h, but due to the fact that
it indirectly included it, several subsequent violations of that goal
were not not noticed. We could just reuse the approach of declaring
parameters as int, but it seems nicer to move LockTupleMode to
lockoptions.h - that's not a perfect location, but also doesn't seem
bad.
As a number of files relied on implicitly included heapam.h, a
significant number of files grew an explicit include. It's quite
probably that a few external projects will need to do the same.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
This speeds up write operations (INSERT, UPDATE, DELETE, COPY, as well
as the future MERGE) on partitioned tables.
This changes the setup for tuple routing so that it does far less work
during the initial setup and pushes more work out to when partitions
receive tuples. PartitionDispatchData structs for sub-partitioned
tables are only created when a tuple gets routed through it. The
possibly large arrays in the PartitionTupleRouting struct have largely
been removed. The partitions[] array remains but now never contains any
NULL gaps. Previously the NULLs had to be skipped during
ExecCleanupTupleRouting(), which could add a large overhead to the
cleanup when the number of partitions was large. The partitions[] array
is allocated small to start with and only enlarged when we route tuples
to enough partitions that it runs out of space. This allows us to keep
simple single-row partition INSERTs running quickly. Redesign
The arrays in PartitionTupleRouting which stored the tuple translation maps
have now been removed. These have been moved out into a
PartitionRoutingInfo struct which is an additional field in ResultRelInfo.
The find_all_inheritors() call still remains by far the slowest part of
ExecSetupPartitionTupleRouting(). This commit just removes the other slow
parts.
In passing also rename the tuple translation maps from being ParentToChild
and ChildToParent to being RootToPartition and PartitionToRoot. The old
names mislead you into thinking that a partition of some sub-partitioned
table would translate to the rowtype of the sub-partitioned table rather
than the root partitioned table.
Authors: David Rowley and Amit Langote, heavily revised by Álvaro Herrera
Testing help from Jesper Pedersen and Kato Sho.
Discussion: https://postgr.es/m/CAKJS1f_1RJyFquuCKRFHTdcXqoPX-PYqAd7nz=GVBwvGh4a6xA@mail.gmail.com
Upcoming work intends to allow pluggable ways to introduce new ways of
storing table data. Accessing those table access methods from the
executor requires TupleTableSlots to be carry tuples in the native
format of such storage methods; otherwise there'll be a significant
conversion overhead.
Different access methods will require different data to store tuples
efficiently (just like virtual, minimal, heap already require fields
in TupleTableSlot). To allow that without requiring additional pointer
indirections, we want to have different structs (embedding
TupleTableSlot) for different types of slots. Thus different types of
slots are needed, which requires adapting creators of slots.
The slot that most efficiently can represent a type of tuple in an
executor node will often depend on the type of slot a child node
uses. Therefore we need to track the type of slot is returned by
nodes, so parent slots can create slots based on that.
Relatedly, JIT compilation of tuple deforming needs to know which type
of slot a certain expression refers to, so it can create an
appropriate deforming function for the type of tuple in the slot.
But not all nodes will only return one type of slot, e.g. an append
node will potentially return different types of slots for each of its
subplans.
Therefore add function that allows to query the type of a node's
result slot, and whether it'll always be the same type (whether it's
fixed). This can be queried using ExecGetResultSlotOps().
The scan, result, inner, outer type of slots are automatically
inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(),
left/right subtrees respectively. If that's not correct for a node,
that can be overwritten using new fields in PlanState.
This commit does not introduce the actually abstracted implementation
of different kind of TupleTableSlots, that will be left for a followup
commit. The different types of slots introduced will, for now, still
use the same backing implementation.
While this already partially invalidates the big comment in
tuptable.h, it seems to make more sense to update it later, when the
different TupleTableSlot implementations actually exist.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
Previously materializing a slot always returned a HeapTuple. As
current work aims to reduce the reliance on HeapTuples (so other
storage systems can work efficiently), that needs to change. Thus
split the tasks of materializing a slot (i.e. making it independent
from the underlying storage / other memory contexts) from fetching a
HeapTuple from the slot. For brevity, allow to fetch a HeapTuple from
a slot and materializing the slot at the same time, controlled by a
parameter.
For now some callers of ExecFetchSlotHeapTuple, with materialize =
true, expect that changes to the heap tuple will be reflected in the
underlying slot. Those places will be adapted in due course, so while
not pretty, that's OK for now.
Also rename ExecFetchSlotTuple to ExecFetchSlotHeapTupleDatum and
ExecFetchSlotTupleDatum to ExecFetchSlotHeapTupleDatum, as it's likely
that future storage methods will need similar methods. There already
is ExecFetchSlotMinimalTuple, so the new names make the naming scheme
more coherent.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
es_leaf_result_relations doesn't exist; perhaps this was an old name
for es_tuple_routing_result_relations, or maybe this comment has gone
unmaintained through multiple rounds of whacking the code around.
Related comment in execnodes.h was both obsolete and ungrammatical.
