An ancient logic error in cfindloop() could cause the regex engine to fail
to find matches that begin later than the start of the string. This
function is only used when the regex pattern contains a back reference,
and so far as we can tell the error is only reachable if the pattern is
non-greedy (i.e. its first quantifier uses the ? modifier). Furthermore,
the actual match must begin after some potential match that satisfies the
DFA but then fails the back-reference's match test.
Reported and fixed by Jeevan Chalke, with cosmetic adjustments by me.
The documentation for ALTER VIEW had a minor copy-and-paste error in
defining the parameters. Noticed when reviewing the WITH CHECK OPTION
patch.
Backpatch to 9.2 where this was first introduced.
In pg_basebackup.c:reached_end_position(), we're reading from an
internal pipe with our own background process but we're possibly
reading more bytes than will actually fit into our buffer due to
an off-by-one error. As we're reading from an internal pipe
there's no real risk here, but it's good form to not depend on
such convenient arrangements.
Bug spotted by the Coverity scanner.
Back-patch to 9.2 where this showed up.
In pg_dump.c:getEventTriggers, check what major version we are on
before calling createPQExpBuffer() to avoid leaking that bit of
memory.
Leak discovered by the Coverity scanner.
Back-patch to 9.3 where support for dumping event triggers was
added.
In receivelog.c:writeTimeLineHistoryFile(), we were not properly
closing the open'd file descriptor in error cases. While this
wouldn't matter much if we were about to exit due to such an
error, that's not the case with pg_receivexlog as it can be a
long-running process and these errors are non-fatal.
This resource leak was found by the Coverity scanner.
Back-patch to 9.3 where this issue first appeared.
In tuplesort.c:inittapes(), we calculate tapeSpace by first figuring
out how many 'tapes' we can use (maxTapes) and then multiplying the
result by the tape buffer overhead for each. Unfortunately, when
we are on a system with an 8-byte long, we allow work_mem to be
larger than 2GB and that allows maxTapes to be large enough that the
32bit arithmetic can overflow when multiplied against the buffer
overhead.
When this overflow happens, we end up adding the overflow to the
amount of space available, causing the amount of memory allocated to
be larger than work_mem.
Note that to reach this point, you have to set work mem to at least
24GB and be sorting a set which is at least that size. Given that a
user who can set work_mem to 24GB could also set it even higher, if
they were looking to run the system out of memory, this isn't
considered a security issue.
This overflow risk was found by the Coverity scanner.
Back-patch to all supported branches, as this issue has existed
since before 8.4.
In streamutil.c:GetConnection(), upgrade failure to parse the
connection string to an exit(1) instead of simply returning NULL.
Most callers already immediately exited, but pg_receivexlog would
loop on this case, continually trying to re-parse the connection
string (which can't be changed after pg_receivexlog has started).
GetConnection() was already expected to exit(1) in some cases
(eg: failure to allocate memory or if unable to determine the
integer_datetimes flag), so this change shouldn't surprise anyone.
Began looking at this due to the Coverity scanner complaining that
we were leaking err_msg in this case- no longer an issue since we
just exit(1) immediately.
The command strings read by the child processes during parallel
pg_dump, after being read and handled, were not being free'd.
This patch corrects this relatively minor memory leak.
Leak found by the Coverity scanner.
Back patch to 9.3 where parallel pg_dump was introduced.
This makes superuser-issued REFRESH MATERIALIZED VIEW safe regardless of
the object's provenance. REINDEX is an earlier example of this pattern.
As a downside, functions called from materialized views must tolerate
running in a security-restricted operation. CREATE MATERIALIZED VIEW
need not change user ID. Nonetheless, avoid creation of materialized
views that will invariably fail REFRESH by making it, too, start a
security-restricted operation.
Back-patch to 9.3 so materialized views have this from the beginning.
Reviewed by Kevin Grittner.
Previously, pg_upgrade docs recommended using .pgpass if using MD5
authentication to avoid being prompted for a password. Turns out pg_ctl
never prompts for a password, so MD5 requires .pgpass --- document that.
Also recommend 'peer' for authentication too.
Backpatch back to 9.1.
The code in set_append_rel_pathlist() for building parameterized paths
for append relations (inheritance and UNION ALL combinations) supposed
that the cheapest regular path for a child relation would still be cheapest
when reparameterized. Which might not be the case, particularly if the
added join conditions are expensive to compute, as in a recent example from
Jeff Janes. Fix it to compare child path costs *after* reparameterizing.
We can short-circuit that if the cheapest pre-existing path is already
parameterized correctly, which seems likely to be true often enough to be
worth checking for.
Back-patch to 9.2 where parameterized paths were introduced.
Commit 31a891857a128828d47d93c63e041f3b69cbab70 added some tests in
plpgsql.sql that used a function rather unthinkingly named "foo()".
However, rangefuncs.sql has some much older tests that create a function
of that name, and since these test scripts run in parallel, there is a
chance of failures if the timing is just right. Use another name to
avoid that. Per buildfarm (failure seen today on "hamerkop", but
probably it's happened before and not been noticed).
An INSERT into such a view should work just like an INSERT into its base
table, ie the insertion should go directly into that table ... not be
duplicated into each child table, as was happening before, per bug #8275
from Rushabh Lathia. On the other hand, the current behavior for
UPDATE/DELETE seems reasonable: the update/delete traverses the child
tables, or not, depending on whether the view specifies ONLY or not.
Add some regression tests covering this area.
Dean Rasheed
Specifically, permit attaching them to the error in RAISE and retrieving
them from a caught error in GET STACKED DIAGNOSTICS. RAISE enforces
nothing about the content of the fields; for its purposes, they are just
additional string fields. Consequently, clarify in the protocol and
libpq documentation that the usual relationships between error fields,
like a schema name appearing wherever a table name appears, are not
universal. This freedom has other applications; consider a FDW
propagating an error from an RDBMS having no schema support.
Back-patch to 9.3, where core support for the error fields was
introduced. This prevents the confusion of having a release where libpq
exposes the fields and PL/pgSQL does not.
Pavel Stehule, lexical revisions by Noah Misch.
Make it easier for readers of the FP docs to find out about possibly
truncated values.
Per complaint from Tom Duffey in message
F0E0F874-C86F-48D1-AA2A-0C5365BF5118@trillitech.com
Author: Albe Laurenz
Reviewed by: Abhijit Menon-Sen
With -Wtype-limits, gcc correctly points out that size_t can never be < 0.
Backpatch to 9.3 and 9.2. It's been like this forever, but in <= 9.1 you got
a lot other warnings with -Wtype-limits anyway (at least with my version of
gcc).
Andres Freund
On Unix, you can embed double-quotes in single-quotes, and via versa.
However, on Windows, you can only escape double-quotes in double-quotes,
so use that in the pg_dump -t/table example.
Backpatch to 9.3.
Report from Mike Toews
When there's a comment on an index that was created with UNIQUE or PRIMARY
KEY constraint syntax, we need to label the comment as depending on the
constraint not the index, since only the constraint object actually appears
in the dump. This incorrect dependency can lead to parallel pg_restore
trying to restore the comment before the index has been created, per bug
#8257 from Lloyd Albin.
This patch fixes pg_dump to produce the right dependency in dumps made
in the future. Usually we also try to hack pg_restore to work around
bogus dependencies, so that existing (wrong) dumps can still be restored in
parallel mode; but that doesn't seem practical here since there's no easy
way to relate the constraint dump entry to the comment after the fact.
Andres Freund
On Unix-ish platforms, EWOULDBLOCK may be the same as EAGAIN, which is
*not* a success return, at least not on Linux. We need to treat it as a
failure to avoid giving a misleading error message. Per the Single Unix
Spec, only EINPROGRESS and EINTR returns indicate that the connection
attempt is in progress.
On Windows, on the other hand, EWOULDBLOCK (WSAEWOULDBLOCK) is the expected
case. We must accept EINPROGRESS as well because Cygwin will return that,
and it doesn't seem worth distinguishing Cygwin from native Windows here.
It's not very clear whether EINTR can occur on Windows, but let's leave
that part of the logic alone in the absence of concrete trouble reports.
Also, remove the test for errno == 0, effectively reverting commit
da9501bddb42222dc33c031b1db6ce2133bcee7b, which AFAICS was just a thinko;
or at best it might have been a workaround for a platform-specific bug,
which we can hope is gone now thirteen years later. In any case, since
libpq makes no effort to reset errno to zero before calling connect(),
it seems unlikely that that test has ever reliably done anything useful.
Andres Freund and Tom Lane
Adjust the wording in the first para of "Sequence Manipulation Functions"
so that neither of the link phrases in it break across line boundaries,
in either A4- or US-page-size PDF output. This fixes a reported build
failure for the 9.3beta2 A4 PDF docs, and future-proofs this particular
para against causing similar problems in future. (Perhaps somebody will
fix this issue in the SGML/TeX documentation tool chain someday, but I'm
not holding my breath.)
Back-patch to all supported branches, since the same problem could rise up
to bite us in future updates if anyone changes anything earlier than this
in func.sgml.
