ff9618e82a introduced has_partition_ancestor_privs(), which is used
to check whether a user has MAINTAIN on any partition ancestors.
This involves syscache lookups, and presently this function does
not take any relation locks, so it is likely subject to the same
kind of cache lookup failures that were fixed by 19de0ab23c.
To fix this problem, this commit partially reverts ff9618e82a.
Specifically, it removes the partition-related changes, including
the has_partition_ancestor_privs() function mentioned above. This
means that MAINTAIN on a partitioned table is no longer sufficient
to perform maintenance commands on its partitions. This is more
like how privileges for maintenance commands work on supported
versions. Privileges are checked for each partition, so a command
that flows down to all partitions might refuse to process them
(e.g., if the current user doesn't have MAINTAIN on the partition).
In passing, adjust a few related comments and error messages, and
add a test for the privilege checks for CLUSTER on a partitioned
table.
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/20230613211246.GA219055%40nathanxps13
ff9618e82a introduced the skip_privs parameter, which is used to
skip privilege checks when recursing to a relation's TOAST table.
This parameter should have been added as a flag bit in
VacuumParams->options instead.
Suggested-by: Michael Paquier
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/ZIj4v1CwqlDVJZfB%40paquier.xyz
This reverts commit e056c557ae and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
We now create pg_constaint rows for NOT NULL constraints with
contype='n'.
We propagate these constraints during operations such as adding
inheritance relationships, creating and attaching partitions, creating
tables LIKE other tables. We mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations; for example, as opposed to CHECK constraints, we don't
match NOT NULL ones by name when descending a hierarchy to alter it;
instead we match by column number. This means we don't require the
constraint names to be identical across a hierarchy.
For now, we omit them from system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
This has been very long in the making. The first patch was written by
Bernd Helmle in 2010 to add a new pg_constraint.contype value ('n'),
which I (Álvaro) then hijacked in 2011 and 2012, until that one was
killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring additional pg_attribute columns to
track the OID of the NOT NULL constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CACA0E642A0267EDA387AF2B%40%5B172.26.14.62%5D
Discussion: https://postgr.es/m/AANLkTinLXMOEMz+0J29tf1POokKi4XDkWJ6-DDR9BKgU@mail.gmail.com
Discussion: https://postgr.es/m/20110707213401.GA27098@alvh.no-ip.org
Discussion: https://postgr.es/m/1343682669-sup-2532@alvh.no-ip.org
Discussion: https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Discussion: https://postgr.es/m/20220817181249.q7qvj3okywctra3c@alvherre.pgsql
1cbbee033 added BUFFER_USAGE_LIMIT to the VACUUM and ANALYZE commands, so
here we permit that option to be specified in vacuumdb.
In passing, adjust the documents for vacuum_buffer_usage_limit and the
BUFFER_USAGE_LIMIT VACUUM option to mention "kB" rather than "KB". Do the
same for the ERROR message in ExecVacuum() and
check_vacuum_buffer_usage_limit(). Without that we might tell a user that
the valid minimum value is 128 KB only to reject that because we accept
only "kB" and not "KB".
Also, add a small reminder comment in vacuum.h to try to trigger the
memory of anyone adding new fields to VacuumParams that they might want to
consider if vacuumdb needs to grow a new option too.
Author: Melanie Plageman
Reviewed-by: Justin Pryzby
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/ZAzTg3iEnubscvbf@telsasoft.com
Allow autovacuum to reload the config file more often so that cost-based
delay parameters can take effect while VACUUMing a relation. Previously,
autovacuum workers only reloaded the config file once per relation
vacuumed, so config changes could not take effect until beginning to
vacuum the next table.
Now, check if a reload is pending roughly once per block, when checking
if we need to delay.
In order for autovacuum workers to safely update their own cost delay
and cost limit parameters without impacting performance, we had to
rethink when and how these values were accessed.
Previously, an autovacuum worker's wi_cost_limit was set only at the
beginning of vacuuming a table, after reloading the config file.
Therefore, at the time that autovac_balance_cost() was called, workers
vacuuming tables with no cost-related storage parameters could still
have different values for their wi_cost_limit_base and wi_cost_delay.
Now that the cost parameters can be updated while vacuuming a table,
workers will (within some margin of error) have no reason to have
different values for cost limit and cost delay (in the absence of
cost-related storage parameters). This removes the rationale for keeping
cost limit and cost delay in shared memory. Balancing the cost limit
requires only the number of active autovacuum workers vacuuming a table
with no cost-based storage parameters.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAKRu_ZngzqnEODc7LmS1NH04Kt6Y9huSjz5pp7%2BDXhrjDA0gw%40mail.gmail.com
Vacuum code run both by autovacuum workers and a backend doing
VACUUM/ANALYZE previously inspected VacuumCostLimit and VacuumCostDelay,
which are the global variables backing the GUCs vacuum_cost_limit and
vacuum_cost_delay.
Autovacuum workers needed to override these variables with their
own values, derived from autovacuum_vacuum_cost_limit and
autovacuum_vacuum_cost_delay and worker cost limit balancing logic.
This led to confusing code which, in some cases, both derived and
set a new value of VacuumCostLimit from VacuumCostLimit.
In preparation for refreshing these GUC values more often, introduce
new, independent global variables and add a function to update them
using the GUCs and existing logic.
Per suggestion by Kyotaro Horiguchi
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAKRu_ZngzqnEODc7LmS1NH04Kt6Y9huSjz5pp7%2BDXhrjDA0gw%40mail.gmail.com
While vacuuming a table in failsafe mode, VacuumCostActive should
not be re-enabled. This currently isn't a problem because vacuum
cost parameters are only refreshed in between vacuuming tables and
failsafe status is reset for every table.
In preparation for allowing vacuum cost parameters to be updated
more frequently, elevate LVRelState->failsafe_active to a global,
VacuumFailsafeActive, which will be checked when determining whether
or not to re-enable vacuum cost-related delays.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAKRu_ZngzqnEODc7LmS1NH04Kt6Y9huSjz5pp7%2BDXhrjDA0gw%40mail.gmail.com
vacuum() is used for both the VACUUM command and for autovacuum. There
were many prechecks being done inside vacuum() that were just not relevant
to autovacuum. Let's move the bulk of these into ExecVacuum() so that
they're only executed when running the VACUUM command. This removes a
small amount of overhead when autovacuum vacuums a table.
While we are at it, allocate VACUUM's BufferAccessStrategy in ExecVacuum()
and pass it into vacuum() instead of expecting vacuum() to make it if it's
not already made by the calling function. To make this work, we need to
create the vacuum memory context slightly earlier, so we now need to pass
that down to vacuum() so that it's available for use in other memory
allocations.
Author: Melanie Plageman
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/20230405211534.4skgskbilnxqrmxg@awork3.anarazel.de
Up until now, logical replication actions have been performed as the
subscription owner, who will generally be a superuser. Commit
cec57b1a0f documented hazards
associated with that situation, namely, that any user who owns a
table on the subscriber side could assume the privileges of the
subscription owner by attaching a trigger, expression index, or
some other kind of executable code to it. As a remedy, it suggested
not creating configurations where users who are not fully trusted
own tables on the subscriber.
Although that will work, it basically precludes using logical
replication in the way that people typically want to use it,
namely, to replicate a database from one node to another
without necessarily having any restrictions on which database
users can own tables. So, instead, change logical replication to
execute INSERT, UPDATE, DELETE, and TRUNCATE operations as the
table owner when they are replicated.
Since this involves switching the active user frequently within
a session that is authenticated as the subscription user, also
impose SECURITY_RESTRICTED_OPERATION restrictions on logical
replication code. As an exception, if the table owner can SET
ROLE to the subscription owner, these restrictions have no
security value, so don't impose them in that case.
Subscription owners are now required to have the ability to
SET ROLE to every role that owns a table that the subscription
is replicating. If they don't, replication will fail. Superusers,
who normally own subscriptions, satisfy this property by default.
Non-superusers users who own subscriptions will need to be
granted the roles that own relevant tables.
Patch by me, reviewed (but not necessarily in its entirety) by
Jelte Fennema, Jeff Davis, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoaSCkg9ww9oppPqqs+9RVqCexYCE6Aq=UsYPfnOoDeFkw@mail.gmail.com
The "partitions_total" and "partitions_done" fields were updated
as though the current level of partitioning was the only one.
In multi-level cases, not only could partitions_total change
over the course of the command, but partitions_done could go
backwards or exceed the currently-reported partitions_total.
Fix by setting partitions_total to the total number of direct
and indirect children once at command start, and then just
incrementing partitions_done at appropriate points. Invent
a new progress monitoring function "pgstat_progress_incr_param"
to simplify doing the latter. We can avoid adding cost for the
former when doing CREATE INDEX, because ProcessUtility already
enumerates the children and it's pretty easy to pass the count
down to DefineIndex. In principle the same could be done in
ALTER TABLE, but that's structurally difficult; for now, just
eat the cost of an extra find_all_inheritors scan in that case.
Ilya Gladyshev and Justin Pryzby
Discussion: https://postgr.es/m/a15f904a70924ffa4ca25c3c744cff31e0e6e143.camel@gmail.com
This provides a very simple way to see the generic plan for a
parameterized query. Without this, it's necessary to define
a prepared statement and temporarily change plan_cache_mode,
which is a bit tedious.
One thing that's a bit of a hack perhaps is that we disable
execution-time partition pruning when the GENERIC_PLAN option
is given. That's because the pruning code may attempt to
fetch the value of one of the parameters, which would fail.
Laurenz Albe, reviewed by Julien Rouhaud, Christoph Berg,
Michel Pelletier, Jim Jones, and myself
Discussion: https://postgr.es/m/0a29b954b10b57f0d135fe12aa0909bd41883eb0.camel@cybertec.at
This allows for a string which if an input field matches causes the
column's default value to be inserted. The advantage of this is that
the default can be inserted in some rows and not others, for which
non-default data is available.
The file_fdw extension is also modified to take allow use of this
option.
Israel Barth Rubio
Discussion: https://postgr.es/m/CAO_rXXAcqesk6DsvioOZ5zmeEmpUN5ktZf-9=9yu+DTr0Xr8Uw@mail.gmail.com
If MERGE attempts an UPDATE or DELETE on a table with BEFORE ROW
triggers, or a cross-partition UPDATE (with or without triggers), and
a concurrent UPDATE or DELETE happens, the merge code would fail.
In some cases this would lead to a crash, while in others it would
cause the wrong merge action to be executed, or no action at all. The
immediate cause of the crash was the trigger code calling
ExecGetUpdateNewTuple() as part of the EPQ mechanism, which fails
because during a merge ri_projectNew is NULL, since merge has its own
per-action projection information, which ExecGetUpdateNewTuple() knows
nothing about.
Fix by arranging for the trigger code to exit early, returning the
TM_Result and TM_FailureData information, if a concurrent modification
is detected, allowing the merge code to do the necessary EPQ handling
in its own way. Similarly, prevent the cross-partition update code
from doing any EPQ processing for a merge, allowing the merge code to
work out what it needs to do.
This leads to a number of simplifications in nodeModifyTable.c. Most
notably, the ModifyTableContext->GetUpdateNewTuple() callback is no
longer needed, and mergeGetUpdateNewTuple() can be deleted, since
there is no longer any requirement for get-update-new-tuple during a
merge. Similarly, ModifyTableContext->cpUpdateRetrySlot is no longer
needed. Thus ExecGetUpdateNewTuple() and the retry_slot handling of
ExecCrossPartitionUpdate() can be restored to how they were in v14,
before the merge code was added, and ExecMergeMatched() no longer
needs any special-case handling for cross-partition updates.
While at it, tidy up ExecUpdateEpilogue() a bit, making it handle
recheckIndexes locally, rather than passing it in as a parameter,
ensuring that it is freed properly. This dates back to when it was
split off from ExecUpdate() to support merge.
Per bug #17809 from Alexander Lakhin, and follow-up investigation of
bug #17792, also from Alexander Lakhin.
Back-patch to v15, where MERGE was introduced, taking care to preserve
backwards-compatibility of the trigger API in v15 for any extensions
that might use it.
Discussion:
https://postgr.es/m/17809-9e6650bef133f0fe%40postgresql.orghttps://postgr.es/m/17792-0f89452029662c36%40postgresql.org
This routine is able to retrieve the OID of the schema used with an
extension (pg_extension.extnamespace), or InvalidOid if this information
is not available. plpgsql_check embeds a copy of this code when
performing checks on functions, as one out-of-core example.
Author: Pavel Stehule
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAFj8pRD+9x55hjDoi285jCcjPc8uuY_D+FLn5RpXggdz+4O2sQ@mail.gmail.com
Disabling this option is useful to run VACUUM (with or without FULL) on
only the toast table of a relation, bypassing the main relation. This
option is enabled by default.
Running directly VACUUM on a toast table was already possible without
this feature, by using the non-deterministic name of a toast relation
(as of pg_toast.pg_toast_N, where N would be the OID of the parent
relation) in the VACUUM command, and it required a scan of pg_class to
know the name of the toast table. So this feature is basically a
shortcut to be able to run VACUUM or VACUUM FULL on a toast relation,
using only the name of the parent relation.
A new switch called --no-process-main is added to vacuumdb, to work as
an equivalent of PROCESS_MAIN.
Regression tests are added to cover VACUUM and VACUUM FULL, looking at
pg_stat_all_tables.vacuum_count to see how many vacuums have run on
each table, main or toast.
Author: Nathan Bossart
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/20221230000028.GA435655@nathanxps13
Beginning in v15, if you apply ALTER TABLE ENABLE/DISABLE TRIGGER to
a partitioned table, it also affects the partitions' cloned versions
of the affected trigger(s). The initial implementation of this
located the clones by name, but that fails on foreign-key triggers
which have names incorporating their own OIDs. We can fix that, and
also make the behavior more bulletproof in the face of user-initiated
trigger renames, by identifying the cloned triggers by tgparentid.
Following the lead of earlier commits in this area, I took care not
to break ABI in the v15 branch, even though I rather doubt there
are any external callers of EnableDisableTrigger.
While here, update the documentation, which was not touched when
the semantics were changed.
Per bug #17817 from Alan Hodgson. Back-patch to v15; older versions
do not have this behavior.
Discussion: https://postgr.es/m/17817-31dfb7c2100d9f3d@postgresql.org
Eager freezing strategy avoids large build-ups of all-visible pages. It
makes VACUUM trigger page-level freezing whenever doing so will enable
the page to become all-frozen in the visibility map. This is useful for
tables that experience continual growth, particularly strict append-only
tables such as pgbench's history table. Eager freezing significantly
improves performance stability by spreading out the cost of freezing
over time, rather than doing most freezing during aggressive VACUUMs.
It complements the insert autovacuum mechanism added by commit b07642db.
VACUUM determines its freezing strategy based on the value of the new
vacuum_freeze_strategy_threshold GUC (or reloption) with logged tables.
Tables that exceed the size threshold use the eager freezing strategy.
Unlogged tables and temp tables always use eager freezing strategy,
since the added cost is negligible there. Non-permanent relations won't
incur any extra overhead in WAL written (for the obvious reason), nor in
pages dirtied (since any extra freezing will only take place on pages
whose PD_ALL_VISIBLE bit needed to be set either way).
VACUUM uses lazy freezing strategy for logged tables that fall under the
GUC size threshold. Page-level freezing triggers based on the criteria
established in commit 1de58df4, which added basic page-level freezing.
Eager freezing is strictly more aggressive than lazy freezing. Settings
like vacuum_freeze_min_age still get applied in just the same way in
every VACUUM, independent of the strategy in use. The only mechanical
difference between eager and lazy freezing strategies is that only the
former applies its own additional criteria to trigger freezing pages.
Note that even lazy freezing strategy will trigger freezing whenever a
page happens to have required that an FPI be written during pruning,
provided that the page will thereby become all-frozen in the visibility
map afterwards (due to the FPI optimization from commit 1de58df4).
The vacuum_freeze_strategy_threshold default setting is 4GB. This is a
relatively low setting that prioritizes performance stability. It will
be reviewed at the end of the Postgres 16 beta period.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkFok_6EAHuK39GaW4FjEFQsY=3J0AAd6FXk93u-Xq3Fg@mail.gmail.com
Previously, a CREATEROLE user without SUPERUSER could not alter
REPLICATION users in any way, and could not set the BYPASSRLS
attribute. However, they could manipulate the CREATEDB property
even if they themselves did not possess it.
With this change, a CREATEROLE user without SUPERUSER can set or
clear the REPLICATION, BYPASSRLS, or CREATEDB property on a new
role or a role that they have rights to manage if and only if
that property is set for their own role.
This implements the standard idea that you can't give permissions
you don't have (but you can give the ones you do have). We might
in the future want to provide more powerful ways to constrain
what a CREATEROLE user can do - for example, to limit whether
CONNECTION LIMIT can be set or the values to which it can be set -
but that is left as future work.
Patch by me, reviewed by Nathan Bossart, Tushar Ahuja, and Neha
Sharma.
Discussion: http://postgr.es/m/CA+TgmobX=LHg_J5aT=0pi9gJy=JdtrUVGAu0zhr-i5v5nNbJDg@mail.gmail.com
Commit 60684dd8 left loose ends when it came to maintaining toast
tables or partitions.
For toast tables, simply skip the privilege check if the toast table
is an indirect target of the maintenance command, because the main
table privileges have already been checked.
For partitions, allow the maintenance command if the user has the
MAINTAIN privilege on the partition or any parent.
Also make CLUSTER emit "skipping" messages when the user doesn't have
privileges, similar to VACUUM.
Author: Nathan Bossart
Reported-by: Pavel Luzanov
Reviewed-by: Pavel Luzanov, Ted Yu
Discussion: https://postgr.es/m/20230113231339.GA2422750@nathanxps13
Can be set to the empty string, or to either or both of "set" or
"inherit". If set to a non-empty value, a non-superuser who creates
a role (necessarily by relying up the CREATEROLE privilege) will
grant that role back to themselves with the specified options.
This isn't a security feature, because the grant that this feature
triggers can also be performed explicitly. Instead, it's a user experience
feature. A superuser would necessarily inherit the privileges of any
created role and be able to access all such roles via SET ROLE;
with this patch, you can configure createrole_self_grant = 'set, inherit'
to provide a similar experience for a user who has CREATEROLE but not
SUPERUSER.
Discussion: https://postgr.es/m/CA+TgmobN59ct+Emmz6ig1Nua2Q-_o=r6DSD98KfU53kctq_kQw@mail.gmail.com
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
VACUUM normally ends by running vac_update_datfrozenxid(), which
requires a scan of pg_class. Therefore, if one attempts to vacuum a
database one table at a time --- as vacuumdb has done since v12 ---
we will spend O(N^2) time in vac_update_datfrozenxid(). That causes
serious performance problems in databases with tens of thousands of
tables, and indeed the effect is measurable with only a few hundred.
To add insult to injury, only one process can run
vac_update_datfrozenxid at the same time per DB, so this behavior
largely defeats vacuumdb's -j option.
Hence, invent options SKIP_DATABASE_STATS and ONLY_DATABASE_STATS
to allow applications to postpone vac_update_datfrozenxid() until the
end of a series of VACUUM requests, and teach vacuumdb to use them.
Per bug #17717 from Gunnar L. Sadly, this answer doesn't seem
like something we'd consider back-patching, so the performance
problem will remain in v12-v15.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/17717-6c50eb1c7d23a886@postgresql.org
Use a dedicated struct for the XID/MXID cutoffs used by VACUUM, such as
FreezeLimit and OldestXmin. This state is initialized in vacuum.c, and
then passed around by code from vacuumlazy.c to heapam.c freezing
related routines. The new convention is that everybody works off of the
same cutoff state, which is passed around via pointers to const.
Also simplify some of the logic for dealing with frozen xmin in
heap_prepare_freeze_tuple: add dedicated "xmin_already_frozen" state to
clearly distinguish xmin XIDs that we're going to freeze from those that
were already frozen from before. That way the routine's xmin handling
code is symmetrical with the existing xmax handling code. This is
preparation for an upcoming commit that will add page level freezing.
Also refactor the control flow within FreezeMultiXactId(), while adding
stricter sanity checks. We now test OldestXmin directly, instead of
using FreezeLimit as an inexact proxy for OldestXmin. This is further
preparation for the page level freezing work, which will make the
function's caller cede control of page level freezing to the function
where appropriate (where heap_prepare_freeze_tuple sees a tuple that
happens to contain a MultiXactId in its xmax).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/CAH2-WznS9TxXmz2_=SY+SyJyDFbiOftKofM9=aDo68BbXNBUMA@mail.gmail.com
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
Currently a table can only be vacuumed or analyzed by its owner or
a superuser. This can now be extended to any user by means of an
appropriate GRANT.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
Pass VACUUM parameters (VacuumParams state) to vacuum_set_xid_limits()
directly, rather than passing most individual VacuumParams fields as
separate arguments.
Also make vacuum_set_xid_limits() output parameter symbol names match
those used by its vacuumlazy.c caller.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=TE7gW5DgSahDkf0UEZigFGAoHNNN6EvSrdzC=Kn+hrA@mail.gmail.com
Commit aa0105141 repeated one of the oldest mistakes in our book:
thinking that OID is the same as int32. It isn't of course, and
unsurprisingly the first person who came along with a database
OID above 2 billion broke it. Repair.
Per bug #17677 from Sergey Pankov. Back-patch to v15.
Discussion: https://postgr.es/m/17677-a99fa067d7ed71c9@postgresql.org
Commit 3d956d956 allowed the COPY, but it's done by inserting individual
rows to the foreign table, so it can be inefficient due to the overhead
caused by each round-trip to the foreign server. To improve performance
of the COPY in such a case, this patch allows batch insertion, by
extending the multi-insert machinery in CopyFrom() to the foreign-table
case so that we insert multiple rows to the foreign table at once using
the FDW callback routine added by commit b663a4136. This patch also
allows this for postgres_fdw. It is enabled by the "batch_size" option
added by commit b663a4136, which is disabled by default.
When doing batch insertion, we update progress of the COPY command after
performing the FDW callback routine, to count rows not suppressed by the
FDW as well as a BEFORE ROW INSERT trigger. For consistency, this patch
changes the timing of updating it for plain tables: previously, we
updated it immediately after adding each row to the multi-insert buffer,
but we do so only after writing the rows stored in the buffer out to the
table using table_multi_insert(), which I think would be consistent even
with non-batching mode, because in that mode we update it after writing
each row out to the table using table_tuple_insert().
Andrey Lepikhov, heavily revised by me, with review from Ian Barwick,
Andrey Lepikhov, and Zhihong Yu.
Discussion: https://postgr.es/m/bc489202-9855-7550-d64c-ad2d83c24867%40postgrespro.ru
This is useful as a way for extensions to process COPY TO rows in the
way they see fit (say auditing, analytics, backend, etc.) without the
need to invoke an external process running as the OS user running the
backend through PROGRAM that requires superuser rights. COPY FROM
already provides a similar callback for logical replication. For COPY
TO, the callback is triggered when we are ready to send a row in
CopySendEndOfRow(), which is the same code path as when sending a row
to a frontend or a pipe/file.
A small test module, test_copy_callbacks, is added to provide some
coverage for this facility.
Author: Bilva Sanaba, Nathan Bossart
Discussion: https://postgr.es/m/253C21D1-FCEB-41D9-A2AF-E6517015B7D7@amazon.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions. Having parameter names
that are reliably consistent in this way will make it easier to reason
about groups of related C functions from the same translation unit as a
module. It will also make certain refactoring tasks easier.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
Before now, the cutoffs that VACUUM used to determine which XIDs/MXIDs
to freeze were determined at the start of each VACUUM by taking related
cutoffs that represent which XIDs/MXIDs VACUUM should treat as still
running, and subtracting an XID/MXID age based value controlled by GUCs
like vacuum_freeze_min_age. The FreezeLimit cutoff (XID freeze cutoff)
was derived by subtracting an XID age value from OldestXmin, while the
MultiXactCutoff cutoff (MXID freeze cutoff) was derived by subtracting
an MXID age value from OldestMxact. This approach didn't match the
approach used nearby to determine whether this VACUUM operation should
be an aggressive VACUUM or not.
VACUUM now uses the standard approach instead: it subtracts the same
age-based values from next XID/next MXID (rather than subtracting from
OldestXmin/OldestMxact). This approach is simpler and more uniform.
Most of the time it will have only a negligible impact on how and when
VACUUM freezes. It will occasionally make VACUUM more robust in the
event of problems caused by long running transaction. These are cases
where OldestXmin and OldestMxact are held back by so much that they
attain an age that is a significant fraction of the value of age-based
settings like vacuum_freeze_min_age.
There is no principled reason why freezing should be affected in any way
by the presence of a long-running transaction -- at least not before the
point that the OldestXmin and OldestMxact limits used by each VACUUM
operation attain an age that makes it unsafe to freeze some of the
XIDs/MXIDs whose age exceeds the value of the relevant age-based
settings. The new approach should at least make freezing degrade more
gracefully than before, even in the most extreme cases.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkOv5CEeyOO=c91XnT5WBR_0gii0Wn5UbZhJ=4TTykDYg@mail.gmail.com
The GRANT statement can now specify WITH INHERIT TRUE or WITH
INHERIT FALSE to control whether the member inherits the granted
role's permissions. For symmetry, you can now likewise write
WITH ADMIN TRUE or WITH ADMIN FALSE to turn ADMIN OPTION on or off.
If a GRANT does not specify WITH INHERIT, the behavior based on
whether the member role is marked INHERIT or NOINHERIT. This means
that if all roles are marked INHERIT or NOINHERIT before any role
grants are performed, the behavior is identical to what we had before;
otherwise, it's different, because ALTER ROLE [NO]INHERIT now only
changes the default behavior of future grants, and has no effect on
existing ones.
Patch by me. Reviewed and testing by Nathan Bossart and Tushar Ahuja,
with design-level comments from various others.
Discussion: http://postgr.es/m/CA+Tgmoa5Sf4PiWrfxA=sGzDKg0Ojo3dADw=wAHOhR9dggV=RmQ@mail.gmail.com
Using ATSimpleRecursion() in ATPrepCmd() to do so as bbb927b4db did is
not correct, because ATPrepCmd() can't distinguish between triggers that
may be cloned and those that may not, so would wrongly try to recurse
for the latter category of triggers.
So this commit restores the code in EnableDisableTrigger() that
86f575948c had added to do the recursion, which would do it only for
triggers that may be cloned, that is, row-level triggers. This also
changes tablecmds.c such that ATExecCmd() is able to pass the value of
ONLY flag down to EnableDisableTrigger() using its new 'recurse'
parameter.
This also fixes what seems like an oversight of 86f575948c that the
recursion to partition triggers would only occur if EnableDisableTrigger()
had actually changed the trigger. It is more apt to recurse to inspect
partition triggers even if the parent's trigger didn't need to be
changed: only then can we be certain that all descendants share the same
state afterwards.
Backpatch all the way back to 11, like bbb927b4db. Care is taken not
to break ABI compatibility (and that no catversion bump is needed.)
Co-authored-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Discussion: https://postgr.es/m/CA+HiwqG-cZT3XzGAnEgZQLoQbyfJApVwOTQaCaas1mhpf+4V5A@mail.gmail.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
auto_explain.log_parameter_max_length is a new GUC part of the
extension, similar to the corresponding core setting, that controls the
inclusion of query parameters in the logged explain output.
More tests are added to check the behavior of this new parameter: when
parameters logged in full (the default of -1), when disabled (value of
0) and when partially truncated (value different than the two others).
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87ee09mohb.fsf@wibble.ilmari.org
The last usage of this argument in this routine can be tracked down to
7e2f9062, aka 11 years ago. Getting rid of this argument can also be an
advantage for extensions calling check_index_is_clusterable(), as it
removes any need to worry about the meaning of what a recheck would be
at this level.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411140609.GF26620@telsasoft.com
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
