Relying on pg_memory_is_all_zeros(), which would apply SIMD instructions
when dealing with an aligned page, is proving to be at least three times
faster than the original size_t-based comparisons when checking if a
BLCKSZ page is full of zeros. Note that PageIsVerifiedExtended() is
called each time a page is read from disk, and making it faster is a
good thing.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/CAApHDvq7P-JgFhgtxUPqhavG-qSDVUhyWaEX9M8_MNorFEijZA@mail.gmail.com
After a closer lookup, this makes the all-zero check of the page more
expensive, so let's remove the new function call in bufpage.c. The
maths of the check were also incorrect, checking that the page was full
of zeros only for the first 1kB.
This brings back the code to the state it was at 49d6c7d8da.
Per discussion with David Rowley and Bertrand Drouvot.
Discussion: https://postgr.es/m/CAApHDvrXzPAr3FxoBuB7b3D-okNoNA2jxLun1rW8Yw5wkbqusw@mail.gmail.com
This new function tests if a memory region starting at a given location
for a defined length is made only of zeroes. This unifies in a single
path the all-zero checks that were happening in a couple of places of
the backend code:
- For pgstats entries of relation, checkpointer and bgwriter, where
some "all_zeroes" variables were previously used with memcpy().
- For all-zero buffer pages in PageIsVerifiedExtended().
This new function uses the same forward scan as the check for all-zero
buffer pages, applying it to the three pgstats paths mentioned above.
Author: Bertrand Drouvot
Reviewed-by: Peter Eisentraut, Heikki Linnakangas, Peter Smith
Discussion: https://postgr.es/m/ZupUDDyf1hHI4ibn@ip-10-97-1-34.eu-west-3.compute.internal
In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a
later commit, we need the addresses of user space buffers to be well
aligned. The exact requirements vary by OS and file system (typically
sectors and/or memory pages). The address alignment size is set to
4096, which is enough for currently known systems: it matches modern
sectors and common memory page size. There is no standard governing
O_DIRECT's requirements so we might eventually have to reconsider this
with more information from the field or future systems.
Aligning I/O buffers on memory pages is also known to improve regular
buffered I/O performance.
Three classes of I/O buffers for regular data pages are adjusted:
(1) Heap buffers are now allocated with the new palloc_aligned() or
MemoryContextAllocAligned() functions introduced by commit 439f6175.
(2) Stack buffers now use a new struct PGIOAlignedBlock to respect
PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer
pool is also aligned in shared memory.
WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for
XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus
for O_DIRECT WAL writes to fail to be well aligned, but that's a
pre-existing condition and will be addressed by a later commit.
BufFiles are not yet addressed (there's no current plan to use O_DIRECT
for those, but they could potentially get some incidental speedup even
in plain buffered I/O operations through better alignment).
If we can't align stack objects suitably using the compiler extensions
we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to
0. This avoids the need to consider systems that have O_DIRECT but
can't align stack objects the way we want; such systems could in theory
be supported with more work but we don't currently know of any such
machines, so it's easier to pretend there is no O_DIRECT support
instead. That's an existing and tested class of system.
Add assertions that all buffers passed into smgrread(), smgrwrite() and
smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack
alignment tricks may be unavailable) or the block size has been set too
small to allow arrays of buffers to be all aligned.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com
Because we added StaticAssertStmt() first before StaticAssertDecl(),
some uses as well as the instructions in c.h are now a bit backwards
from the "native" way static assertions are meant to be used in C.
This updates the guidance and moves some static assertions to better
places.
Specifically, since the addition of StaticAssertDecl(), we can put
static assertions at the file level. This moves a number of static
assertions out of function bodies, where they might have been stuck
out of necessity, to perhaps better places at the file level or in
header files.
Also, when the static assertion appears in a position where a
declaration is allowed, then using StaticAssertDecl() is more native
than StaticAssertStmt().
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/941a04e7-dd6f-c0e4-8cdf-a33b3338cbda%40enterprisedb.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Reclaim space from the line pointer array when heap pruning leaves
behind a contiguous group of LP_UNUSED items at the end of the array.
This happens during subsequent page defragmentation. Certain kinds of
heap line pointer bloat are ameliorated by this new optimization.
Follow-up work to commit 3c3b8a4b26, which taught VACUUM to truncate the
line pointer array in about the same way during VACUUM's second pass
over the heap. We now apply line pointer array truncation during both
the first and the second pass over the heap made by VACUUM. We can also
perform line pointer array truncation during opportunistic pruning.
Matthias van de Meent, with small tweaks by me.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAEze2Wg36%2B4at2eWJNcYNiW2FJmht34x3YeX54ctUSs7kKoNcA%40mail.gmail.com
The term "super-exclusive lock" is a synonym for "buffer cleanup lock"
that first appeared in nbtree many years ago. Standardize things by
consistently using the term cleanup lock. This finishes work started by
commit 276db875.
There is no good reason to have two terms. But there is a good reason
to only have one: to avoid confusion around why VACUUM acquires a full
cleanup lock (not just an ordinary exclusive lock) in index AMs, during
ambulkdelete calls. This has nothing to do with protecting the physical
index data structure itself. It is needed to implement a locking
protocol that ensures that TIDs pointing to the heap/table structure
cannot get marked for recycling by VACUUM before it is safe (which is
somewhat similar to how VACUUM uses cleanup locks during its first heap
pass). Note that it isn't strictly necessary for index AMs to implement
this locking protocol -- several index AMs use an MVCC snapshot as their
sole interlock to prevent unsafe TID recycling.
In passing, update the nbtree README. Cleanly separate discussion of
the aforementioned index vacuuming locking protocol from discussion of
the "drop leaf page pin" optimization added by commit 2ed5b87f. We now
structure discussion of the latter by describing how individual index
scans may safely opt out of applying the standard locking protocol (and
so can avoid blocking progress by VACUUM). Also document why the
optimization is not safe to apply during nbtree index-only scans.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzngHgQa92tz6NQihf4nxJwRzCV36yMJO_i8dS+2mgEVKw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkHPgsBBvGWjz=8PjNhDefy7XRkDKiT5NxMs-n5ZCf2dA@mail.gmail.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded. This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.
Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.
Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
This is useful for checks of relation pages without having to load the
pages into the shared buffers, and two cases can make use of that: page
verification in base backups and the online, lock-safe, flavor.
Compatibility is kept with past versions using a macro that calls the
new extended routine with the set of options compatible with the
original version.
Extracted from a larger patch by the same author.
Author: Anastasia Lubennikova
Reviewed-by: Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/608f3476-0598-2514-2c03-e05c7d2b0cbd@postgrespro.ru
This function could often be seen in profiles of vacuum and could often
be a significant bottleneck during recovery. The problem was that a qsort
was performed in order to sort an array of item pointers in reverse offset
order so that we could use that to safely move tuples up to the end of the
page without overwriting the memory of yet-to-be-moved tuples. i.e. we
used to compact the page starting at the back of the page and move towards
the front. The qsort that this required could be expensive for pages with
a large number of tuples.
In this commit, we take another approach to tuple compactification.
Now, instead of sorting the remaining item pointers array we first check
if the array is presorted and only memmove() the tuples that need to be
moved. This presorted check can be done very cheaply in the calling
functions when the array is being populated. This presorted case is very
fast.
When the item pointer array is not presorted we must copy tuples that need
to be moved into a temp buffer before copying them back into the page
again. This differs from what we used to do here as we're now copying the
tuples back into the page in reverse line pointer order. Previously we
left the existing order alone. Reordering the tuples results in an
increased likelihood of hitting the pre-sorted case the next time around.
Any newly added tuple which consumes a new line pointer will also maintain
the correct sort order of tuples in the page which will also result in the
presorted case being hit the next time. Only consuming an unused line
pointer can cause the order of tuples to go out again, but that will be
corrected next time the function is called for the page.
Benchmarks have shown that the non-presorted case is at least equally as
fast as the original qsort method even when the page just has a few
tuples. As the number of tuples becomes larger the new method maintains
its performance whereas the original qsort method became much slower when
the number of tuples on the page became large.
Author: David Rowley
Reviewed-by: Thomas Munro
Tested-by: Jakub Wartak
Discussion: https://postgr.es/m/CA+hUKGKMQFVpjr106gRhwk6R-nXv0qOcTreZuQzxgpHESAL6dw@mail.gmail.com
Replace CFLAGS_VECTOR with CFLAGS_UNROLL_LOOPS and CFLAGS_VECTORIZE,
allowing us to distinguish whether we want to apply -funroll-loops,
-ftree-vectorize, or both to a particular source file. Up to now
the only consumer of the symbol has been checksum.c which wants
both, so that there was no need to distinguish; but that's about
to change.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
Deduplication reduces the storage overhead of duplicates in indexes that
use the standard nbtree index access method. The deduplication process
is applied lazily, after the point where opportunistic deletion of
LP_DEAD-marked index tuples occurs. Deduplication is only applied at
the point where a leaf page split would otherwise be required. New
posting list tuples are formed by merging together existing duplicate
tuples. The physical representation of the items on an nbtree leaf page
is made more space efficient by deduplication, but the logical contents
of the page are not changed. Even unique indexes make use of
deduplication as a way of controlling bloat from duplicates whose TIDs
point to different versions of the same logical table row.
The lazy approach taken by nbtree has significant advantages over a GIN
style eager approach. Most individual inserts of index tuples have
exactly the same overhead as before. The extra overhead of
deduplication is amortized across insertions, just like the overhead of
page splits. The key space of indexes works in the same way as it has
since commit dd299df8 (the commit that made heap TID a tiebreaker
column).
Testing has shown that nbtree deduplication can generally make indexes
with about 10 or 15 tuples for each distinct key value about 2.5X - 4X
smaller, even with single column integer indexes (e.g., an index on a
referencing column that accompanies a foreign key). The final size of
single column nbtree indexes comes close to the final size of a similar
contrib/btree_gin index, at least in cases where GIN's posting list
compression isn't very effective. This can significantly improve
transaction throughput, and significantly reduce the cost of vacuuming
indexes.
A new index storage parameter (deduplicate_items) controls the use of
deduplication. The default setting is 'on', so all new B-Tree indexes
automatically use deduplication where possible. This decision will be
reviewed at the end of the Postgres 13 beta period.
There is a regression of approximately 2% of transaction throughput with
synthetic workloads that consist of append-only inserts into a table
with several non-unique indexes, where all indexes have few or no
repeated values. The underlying issue is that cycles are wasted on
unsuccessful attempts at deduplicating items in non-unique indexes.
There doesn't seem to be a way around it short of disabling
deduplication entirely. Note that deduplication of items in unique
indexes is fairly well targeted in general, which avoids the problem
there (we can use a special heuristic to trigger deduplication passes in
unique indexes, since we're specifically targeting "version bloat").
Bump XLOG_PAGE_MAGIC because xl_btree_vacuum changed.
No bump in BTREE_VERSION, since the representation of posting list
tuples works in a way that's backwards compatible with version 4 indexes
(i.e. indexes built on PostgreSQL 12). However, users must still
REINDEX a pg_upgrade'd index to use deduplication, regardless of the
Postgres version they've upgraded from. This is the only way to set the
new nbtree metapage flag indicating that deduplication is generally
safe.
Author: Anastasia Lubennikova, Peter Geoghegan
Reviewed-By: Peter Geoghegan, Heikki Linnakangas
Discussion:
https://postgr.es/m/55E4051B.7020209@postgrespro.ruhttps://postgr.es/m/4ab6e2db-bcee-f4cf-0916-3a06e6ccbb55@postgrespro.ru
Those new assertions can be used at file scope, outside of any function
for compilation checks. This commit provides implementations for C and
C++, and fallback implementations.
Author: Peter Smith
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Dagfinn Ilmari Mannsåker,
Michael Paquier
Discussion: https://postgr.es/m/201DD0641B056142AC8C6645EC1B5F62014B8E8030@SYD1217
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
The term "item pointer" should not be used to refer to ItemIdData
variables, since that is needlessly ambiguous. Only
ItemPointerData/ItemPointer variables should be called item pointers.
To fix, establish the convention that ItemIdData variables should always
be referred to either as "item identifiers" or "line pointers". The
term "item identifier" already predominates in docs and translatable
messages, and so should be the preferred alternative there.
Discussion: https://postgr.es/m/CAH2-Wz=c=MZQjUzde3o9+2PLAPuHTpVZPPdYxN=E4ndQ2--8ew@mail.gmail.com
This adds a column that counts how many checksum failures have occurred
on files belonging to a specific database. Both checksum failures
during normal backend processing and those created when a base backup
detects a checksum failure are counted.
Author: Magnus Hagander
Reviewed by: Julien Rouhaud
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
There doesn't seem to be any good reason to do the filling of the
itemidbase[] array separately from the first traversal of the pointers.
It's certainly not a win if there are any line pointers with storage,
and even if there aren't, this change doesn't insert code into the part
of the first loop that will be traversed in that case. So let's just
merge the two loops.
Yura Sokolov, reviewed by Claudio Freire
Discussion: https://postgr.es/m/e49befcc6f1d7099834c6fdf5c675a60@postgrespro.ru
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
There are no functional changes here; this simply encapsulates knowledge
of the ItemPointerData struct so that a future patch can change things
without more breakage.
All direct users of ip_blkid and ip_posid are changed to use existing
macros ItemPointerGetBlockNumber and ItemPointerGetOffsetNumber
respectively. For callers where that's inappropriate (because they
Assert that the itempointer is is valid-looking), add
ItemPointerGetBlockNumberNoCheck and ItemPointerGetOffsetNumberNoCheck,
which lack the assertion but are otherwise identical.
Author: Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdNnFon4cJiL=h1mZH3bgUeU+sWHuU4Yr8AB=j3A2p1GiA@mail.gmail.com
In preparation for adding write-ahead logging to hash indexes,
refactor _hash_freeovflpage and _hash_squeezebucket so that all
related page modifications happen in a single section of code. The
previous coding assumed that it would be fine to move tuples one at a
time, and also that the various operations involved in freeing an
overflow page didn't necessarily all need to be done together, all
of which is true if you don't care about write-ahead logging.
Amit Kapila, with slight changes by me.
The full generality of deleting an arbitrary number of tuples is no longer
needed, so let's save some code and cycles by replacing the original coding
with an implementation based on PageIndexTupleDelete.
We can always get back the old code from git if we need it again for new
callers (though I don't care for its willingness to mess with line pointers
it wasn't told to mess with).
Discussion: <552.1473445163@sss.pgh.pa.us>
Nowadays this is just a backwards-compatibility wrapper around
PageAddItemExtended, so let's avoid the extra level of function call.
In addition, because pretty much all callers are passing constants
for the two bool arguments, compilers will be able to constant-fold
the conversion to a flags bitmask.
Discussion: <552.1473445163@sss.pgh.pa.us>
PageIndexTupleOverwrite performs approximately the same function as
PageIndexTupleDelete (or PageIndexDeleteNoCompact) followed by PageAddItem
targeting the same item pointer offset. But in the case where the new
tuple is the same size as the old, it avoids shuffling other data around on
the page, because the new tuple is placed where the old one was rather than
being appended to the end of the page. This has been shown to provide a
substantial speedup for some GiST use-cases.
Also, this change allows some API simplifications: we can get rid of
the rather klugy and error-prone PAI_ALLOW_FAR_OFFSET flag for
PageAddItemExtended, since that was used only to cover a corner case
for BRIN that's better expressed by using PageIndexTupleOverwrite.
Note that this patch causes a rather subtle WAL incompatibility: the
physical page content change represented by certain WAL records is now
different than it was before, because while the tuples have the same
itempointer line numbers, the tuples themselves are in different places.
I have not bumped the WAL version number because I think it doesn't matter
unless you are trying to do bitwise comparisons of original and replayed
pages, and in any case we're early in a devel cycle and there will probably
be more WAL changes before v10 gets out the door.
There is probably room to make use of PageIndexTupleOverwrite in SP-GiST
and GIN too, but that is left for a future patch.
Andrey Borodin, reviewed by Anastasia Lubennikova, whacked around a bit
by me
Discussion: <CAJEAwVGQjGGOj6mMSgMwGvtFd5Kwe6VFAxY=uEPZWMDjzbn4VQ@mail.gmail.com>
