In 9.4 I added support to use a historical snapshot in
ScanPgRelation(), while adding logical decoding. Unfortunately a
conflict with the concurrent removal of SnapshotNow was incorrectly
resolved, leading to an unregistered snapshot being used.
It is not correct to use an unregistered (or non-active) snapshot for
anything non-trivial, because catalog invalidations can cause the
snapshot to be invalidated.
Luckily it seems unlikely to actively cause problems in practice, as
ScanPgRelation() requires that we already have a lock on the relation,
we only look for a single row, and we don't appear to rely on the
result's tid to be correct. It however is clearly wrong and potential
negative consequences would likely be hard to find. So it seems worth
backpatching the fix, even without a concrete hazard.
Discussion: https://postgr.es/m/20200229052459.wzhqnbhrriezg4v2@alap3.anarazel.de
Backpatch: 9.5-
This reverts commit cb2fd7eac285b1b0a24eeb2b8ed4456b66c5a09f. Per
numerous buildfarm members, it was incompatible with parallel query, and
a test case assumed LP64. Back-patch to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20200321224920.GB1763544@rfd.leadboat.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Remove an obsolete comment from AtEOXact_cleanup(). Restore formatting
of a comment in struct RelationData, mangled by the pgindent run in
commit 9af4159fce6654aa0e081b00d02bca40b978745c. Back-patch to 9.5 (all
supported versions), because another fix stacks on this.
We implement ON COMMIT DELETE ROWS by truncating tables marked that
way, which requires also truncating/rebuilding their indexes. But
RelationTruncateIndexes asks the relcache for up-to-date copies of any
index expressions, which may cause execution of eval_const_expressions
on them, which can result in actual execution of subexpressions.
This is a bad thing to have happening during ON COMMIT. Manuel Rigger
reported that use of a SQL function resulted in crashes due to
expectations that ActiveSnapshot would be set, which it isn't.
The most obvious fix perhaps would be to push a snapshot during
PreCommit_on_commit_actions, but I think that would just open the door
to more problems: CommitTransaction explicitly expects that no
user-defined code can be running at this point.
Fortunately, since we know that no tuples exist to be indexed, there
seems no need to use the real index expressions or predicates during
RelationTruncateIndexes. We can set up dummy index expressions
instead (we do need something that will expose the right data type,
as there are places that build index tupdescs based on this), and
just ignore predicates and exclusion constraints.
In a green field it'd likely be better to reimplement ON COMMIT DELETE
ROWS using the same "init fork" infrastructure used for unlogged
relations. That seems impractical without catalog changes though,
and even without that it'd be too big a change to back-patch.
So for now do it like this.
Per private report from Manuel Rigger. This has been broken forever,
so back-patch to all supported branches.
RelationAllowsEarlyPruning() performed a catalog scan, but is used
in two contexts where that was a bad idea:
1. In heap_page_prune_opt(), which runs very frequently in some large
scans. This caused major performance problems in a field report
that was easy to reproduce.
2. In TestForOldSnapshot(), which runs while we hold a buffer content
lock. It's not clear if this was guaranteed to be free of buffer
deadlock risk.
The check was introduced in commit 2cc41acd8 and defended against a
real problem: 9.6's hash indexes have no page LSN and so we can't
allow early pruning (ie the snapshot-too-old feature). We can remove
the check from all later releases though: hash indexes are now logged,
and there is no way to create UNLOGGED indexes on regular logged
tables.
If a future release allows such a combination, it might need to put
a similar check in place, but it'll need some more thought.
Back-patch to 10.
Author: Thomas Munro
Reviewed-by: Tom Lane, who spotted the second problem
Discussion: https://postgr.es/m/CA%2BhUKGKT8oTkp5jw_U4p0S-7UG9zsvtw_M47Y285bER6a2gD%2Bg%40mail.gmail.com
Discussion: https://postgr.es/m/CAA4eK1%2BWy%2BN4eE5zPm765h68LrkWc3Biu_8rzzi%2BOYX4j%2BiHRw%40mail.gmail.com
Commits 3dbb317d3 et al failed under CLOBBER_CACHE_ALWAYS testing.
Investigation showed that to reindex pg_class_oid_index, we must
suppress accesses to the index (via SetReindexProcessing) before we call
RelationSetNewRelfilenode, or at least before we do CommandCounterIncrement
therein; otherwise, relcache reloads happening within the CCI may try to
fetch pg_class rows using the index's new relfilenode value, which is as
yet an empty file.
Of course, the point of 3dbb317d3 was that that ordering didn't work
either, because then RelationSetNewRelfilenode's own update of the index's
pg_class row cannot access the index, should it need to.
There are various ways we might have got around that, but Andres Freund
came up with a brilliant solution: for a mapped index, we can really just
skip the pg_class update altogether. The only fields it was actually
changing were relpages etc, but it was just setting them to zeroes which
is useless make-work. (Correct new values will be installed at the end
of index build.) All pg_class indexes are mapped and probably always will
be, so this eliminates the problem by removing work rather than adding it,
always a pleasant outcome. Having taught RelationSetNewRelfilenode to do
it that way, we can revert the code reordering in reindex_index. (But
I left the moved setup code where it was; there seems no reason why it
has to run without use of the old index. If you're trying to fix a
busted pg_class index, you'll have had to disable system index use
altogether to get this far.)
Moreover, this means we don't need RelationSetIndexList at all, because
reindex_relation's hacking to make "REINDEX TABLE pg_class" work is
likewise now unnecessary. We'll leave that code in place in the back
branches, but a follow-on patch will remove it in HEAD.
In passing, do some minor cleanup for commit 5c1560606 (in HEAD only),
notably removing a duplicate newrnode assignment.
Patch by me, using a core idea due to Andres Freund. Back-patch to all
supported branches, as 3dbb317d3 was.
Discussion: https://postgr.es/m/28926.1556664156@sss.pgh.pa.us
If a FOR ALL TABLES publication exists, temporary and unlogged tables
are ignored for publishing changes. But CheckCmdReplicaIdentity()
would still check in that case that such a table has a replica
identity set before accepting updates. To fix, have
GetRelationPublicationActions() return that such a table publishes no
actions.
Discussion: https://www.postgresql.org/message-id/f3f151f7-c4dd-1646-b998-f60bd6217dd3@2ndquadrant.com
The original coding of generate_partition_qual() just copied the list
of predicate expressions into the global CacheMemoryContext, making it
effectively impossible to clean up when the owning relcache entry is
destroyed --- the relevant code in RelationDestroyRelation() only managed
to free the topmost List header :-(. This resulted in a session-lifespan
memory leak whenever a table partition's relcache entry is rebuilt.
Fortunately, that's not normally a large data structure, and rebuilds
shouldn't occur all that often in production situations; but this is
still a bug worth fixing back to v10 where the code was introduced.
To fix, put the cached expression tree into its own small memory context,
as we do with other complicated substructures of relcache entries.
Also, deal more honestly with the case that a partition has an empty
partcheck list; while that probably isn't a case that's very interesting
for production use, it's legal.
In passing, clarify comments about how partitioning-related relcache
data structures are managed, and add some Asserts that we're not leaking
old copies when we overwrite these data fields.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/7961.1552498252@sss.pgh.pa.us
The bug was that determining which columns are part of the replica
identity index using RelationGetIndexAttrBitmap() would run
eval_const_expressions() on index expressions and predicates across
all indexes of the table, which in turn might require a snapshot, but
there wasn't one set, so it crashes. There were actually two separate
bugs, one on the publisher and one on the subscriber.
To trigger the bug, a table that is part of a publication or
subscription needs to have an index with a predicate or expression
that lends itself to constant expressions simplification.
The fix is to avoid the constant expressions simplification in
RelationGetIndexAttrBitmap(), so that it becomes safe to call in these
contexts. The constant expressions simplification comes from the
calls to RelationGetIndexExpressions()/RelationGetIndexPredicate() via
BuildIndexInfo(). But RelationGetIndexAttrBitmap() calling
BuildIndexInfo() is overkill. The latter just takes pg_index catalog
information, packs it into the IndexInfo structure, which former then
just unpacks again and throws away. We can just do this directly with
less overhead and skip the troublesome calls to
eval_const_expressions(). This also removes the awkward
cross-dependency between relcache.c and index.c.
Bug: #15114
Reported-by: Петър Славов <pet.slavov@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/152110589574.1223.17983600132321618383@wrigleys.postgresql.org/
My commit 3de241dba86f introduced some code (in tablecmds.c) to obtain
data from a pg_constraint row for a foreign key, that already existed in
ri_triggers.c. Split it out into its own routine in pg_constraint.c,
where it naturally belongs.
No functional code changes, only code movement.
Backpatch to pg11, because a future bugfix is simpler after this.
The code added by commit c203d6cf8 causes a crash in at least one case,
where a potentially-optimizable expression index has a storage type
different from the input data type. A cursory code review turned up
numerous other problems that seem impractical to fix on short notice.
Andres argued for revert of that patch some time ago, and if additional
senior committers had been paying attention, that's likely what would
have happened, but we were not :-(
At this point we can't just revert, at least not in v11, because that would
mean an ABI break for code touching relcache entries. And we should not
remove the (also buggy) support for the recheck_on_update index reloption,
since it might already be used in some databases in the field. So this
patch just does the as-little-invasive-as-possible measure of disabling
the feature as though recheck_on_update were forced off for all indexes.
I also removed the related regression tests (which would otherwise fail)
and the user-facing documentation of the reloption.
We should undertake a more thorough code cleanup if the patch can't be
fixed, but not under the extreme time pressure of being already overdue
for 11.1 release.
Per report from Ondřej Bouda and subsequent private discussion among
pgsql-release.
Discussion: https://postgr.es/m/20181106185255.776mstcyehnc63ty@alvherre.pgsql
There was no code to handle foreign key constraints on partitioned
tables in the case of ALTER TABLE DETACH; and if you happened to ATTACH
a partition that already had an equivalent constraint, that one was
ignored and a new constraint was created. Adding this to the fact that
foreign key cloning reuses the constraint name on the partition instead
of generating a new name (as it probably should, to cater to SQL
standard rules about constraint naming within schemas), the result was a
pretty poor user experience -- the most visible failure was that just
detaching a partition and re-attaching it failed with an error such as
ERROR: duplicate key value violates unique constraint "pg_constraint_conrelid_contypid_conname_index"
DETAIL: Key (conrelid, contypid, conname)=(26702, 0, test_result_asset_id_fkey) already exists.
because it would try to create an identically-named constraint in the
partition. To make matters worse, if you tried to drop the constraint
in the now-independent partition, that would fail because the constraint
was still seen as dependent on the constraint in its former parent
partitioned table:
ERROR: cannot drop inherited constraint "test_result_asset_id_fkey" of relation "test_result_cbsystem_0001_0050_monthly_2018_09"
This fix attacks the problem from two angles: first, when the partition
is detached, the constraint is also marked as independent, so the drop
now works. Second, when the partition is re-attached, we scan existing
constraints searching for one matching the FK in the parent, and if one
exists, we link that one to the parent constraint. So we don't end up
with a duplicate -- and better yet, we don't need to scan the referenced
table to verify that the constraint holds.
To implement this I made a small change to previously planner-only
struct ForeignKeyCacheInfo to contain the constraint OID; also relcache
now maintains the list of FKs for partitioned tables too.
Backpatch to 11.
Reported-by: Michael Vitale (bug #15425)
Discussion: https://postgr.es/m/15425-2dbc9d2aa999f816@postgresql.org
It's been true for a long time that we expect names of table and domain
constraints to be unique among the constraints of that table or domain.
However, the enforcement of that has been pretty haphazard, and it missed
some corner cases such as creating a CHECK constraint and then an index
constraint of the same name (as per recent report from André Hänsel).
Also, due to the lack of an actual unique index enforcing this, duplicates
could be created through race conditions.
Moreover, the code that searches pg_constraint has been quite inconsistent
about how to handle duplicate names if one did occur: some places checked
and threw errors if there was more than one match, while others just
processed the first match they came to.
To fix, create a unique index on (conrelid, contypid, conname). Since
either conrelid or contypid is zero, this will separately enforce
uniqueness of constraint names among constraints of any one table and any
one domain. (If we ever implement SQL assertions, and put them into this
catalog, more thought might be needed. But it'd be at least as reasonable
to put them into a new catalog; having overloaded this one catalog with
two kinds of constraints was a mistake already IMO.) This index can replace
the existing non-unique index on conrelid, though we need to keep the one
on contypid for query performance reasons.
Having done that, we can simplify the logic in various places that either
coped with duplicates or neglected to, as well as potentially improve
lookup performance when searching for a constraint by name.
Also, as per our usual practice, install a preliminary check so that you
get something more friendly than a unique-index violation report in the
case complained of by André. And teach ChooseIndexName to avoid choosing
autogenerated names that would draw such a failure.
While it's not possible to make such a change in the back branches,
it doesn't seem quite too late to put this into v11, so do so.
Discussion: https://postgr.es/m/0c1001d4428f$0942b430$1bc81c90$@webkr.de
The previous coding saved pointers into the partitioned table's relcache
entry, but then closed the relcache entry, causing those pointers to
nominally become dangling. Actual trouble would be seen in the field
only if a relcache flush occurred mid-query, but that's hardly out of
the question.
While we could fix this by copying all the data in question at query
start, it seems better to just hold the relcache entry open for the
whole query.
While at it, improve the handling of support-function lookups: do that
once per query not once per pruning test. There's still something to be
desired here, in that we fail to exploit the possibility of caching data
across queries in the fn_extra fields of the relcache's FmgrInfo structs,
which could happen if we just used those structs in-place rather than
copying them. However, combining that with the possibility of per-query
lookups of cross-type comparison functions seems to require changes in the
APIs of a lot of the pruning support functions, so it's too invasive to
consider as part of this patch. A win would ensue only for complex
partition key data types (e.g. arrays), so it may not be worth the
trouble.
David Rowley and Tom Lane
Discussion: https://postgr.es/m/17850.1528755844@sss.pgh.pa.us
When vacuum processes a relation it uses the corresponding relcache
entry's relfrozenxid / relminmxid as a cutoff for when to remove
tuples etc. Unfortunately for nailed relations (i.e. critical system
catalogs) bugs could frequently lead to the corresponding relcache
entry being stale.
This set of bugs could cause actual data corruption as vacuum would
potentially not remove the correct row versions, potentially reviving
them at a later point. After 699bf7d05c some corruptions in this vein
were prevented, but the additional error checks could also trigger
spuriously. Examples of such errors are:
ERROR: found xmin ... from before relfrozenxid ...
and
ERROR: found multixact ... from before relminmxid ...
To be caused by this bug the errors have to occur on system catalog
tables.
The two bugs are:
1) Invalidations for nailed relations were ignored, based on the
theory that the relcache entry for such tables doesn't
change. Which is largely true, except for fields like relfrozenxid
etc. This means that changes to relations vacuumed in other
sessions weren't picked up by already existing sessions. Luckily
autovacuum doesn't have particularly longrunning sessions.
2) For shared *and* nailed relations, the shared relcache init file
was never invalidated while running. That means that for such
tables (e.g. pg_authid, pg_database) it's not just already existing
sessions that are affected, but even new connections are as well.
That explains why the reports usually were about pg_authid et. al.
To fix 1), revalidate the rd_rel portion of a relcache entry when
invalid. This implies a bit of extra complexity to deal with
bootstrapping, but it's not too bad. The fix for 2) is simpler,
simply always remove both the shared and local init files.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion:
https://postgr.es/m/20180525203736.crkbg36muzxrjj5e@alap3.anarazel.dehttps://postgr.es/m/CAMa1XUhKSJd98JW4o9StWPrfS=11bPgG+_GDMxe25TvUY4Sugg@mail.gmail.comhttps://postgr.es/m/CAKMFJucqbuoDRfxPDX39WhA3vJyxweRg_zDVXzncr6+5wOguWA@mail.gmail.comhttps://postgr.es/m/CAGewt-ujGpMLQ09gXcUFMZaZsGJC98VXHEFbF-tpPB0fB13K+A@mail.gmail.com
Backpatch: 9.3-
We were using CurrentMemoryContext to put the partsupfunc fmgr_info
into, which isn't right, because we want the PartitionKey as a whole to
be in the isolated Relation->rd_partkeycxt context. This can cause a
crash with user-defined support functions in the operator classes used
by partitioning keys. (Maybe this can cause problems with core-supplied
opclasses too, not sure.)
This is demonstrably broken in Postgres 10, too, but the initial
proposed fix runs afoul of a problem discussed back when 8a0596cb656e
("Get rid of copy_partition_key") reorganized that code: namely that it
is possible to jump out of RelationBuildPartitionKey because of some
error and leave a dangling memory context child of CacheMemoryContext.
Also, while reviewing this I noticed that the removed-in-pg11
copy_partition_key was doing something wrong, unfixed in pg10, namely
doing memcpy() on the FmgrInfo, which is bogus (should be doing
fmgr_info_copy). Therefore, in branch pg10, the sane fix seems to be to
backpatch both the aforementioned 8a0596cb656e and its followup
be2343221fb7 ("Protect against hypothetical memory leaks in
RelationGetPartitionKey"), so do that, then apply the fmgr_info memcxt
bugfix on top.
Add a test case exercising btree-based custom operator classes, which
causes a crash prior to this fix. This is not a security problem,
because in order to create an operator class you need superuser
privileges anyway.
Authors: Álvaro Herrera and Amit Langote
Reported and diagnosed by: Amit Langote
Discussion: https://postgr.es/m/3041e853-b1dd-a0c6-ff21-7cc5633bffd0@lab.ntt.co.jp
- Explicitly forbids opclass, collation and indoptions (like DESC/ASC etc) for
including columns. Throw an error if user points that.
- Truncated storage arrays for such attributes to store only key atrributes,
added assertion checks.
- Do not check opfamily and collation for including columns in
CompareIndexInfo()
Discussion: https://www.postgresql.org/message-id/5ee72852-3c4e-ee35-e2ed-c1d053d45c08@sigaev.ru
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
Originally, we treated memory context names as potentially variable in
all cases, and therefore always copied them into the context header.
Commit 9fa6f00b1 rethought this a little bit and invented a distinction
between fixed and variable names, skipping the copy step for the former.
But we can make things both simpler and more useful by instead allowing
there to be two parts to a context's identification, a fixed "name" and
an optional, variable "ident". The name supplied in the context create
call is now required to be a compile-time-constant string in all cases,
as it is never copied but just pointed to. The "ident" string, if
wanted, is supplied later. This is needed because typically we want
the ident to be stored inside the context so that it's cleaned up
automatically on context deletion; that means it has to be copied into
the context before we can set the pointer.
The cost of this approach is basically just an additional pointer field
in struct MemoryContextData, which isn't much overhead, and is bought
back entirely in the AllocSet case by not needing a headerSize field
anymore, since we no longer have to cope with variable header length.
In addition, we can simplify the internal interfaces for memory context
creation still further, saving a few cycles there. And it's no longer
true that a custom identifier disqualifies a context from participating
in aset.c's freelist scheme, so possibly there's some win on that end.
All the places that were using non-compile-time-constant context names
are adjusted to put the variable info into the "ident" instead. This
allows more effective identification of those contexts in many cases;
for example, subsidary contexts of relcache entries are now identified
by both type (e.g. "index info") and relname, where before you got only
one or the other. Contexts associated with PL function cache entries
are now identified more fully and uniformly, too.
I also arranged for plancache contexts to use the query source string
as their identifier. This is basically free for CachedPlanSources, as
they contained a copy of that string already. We pay an extra pstrdup
to do it for CachedPlans. That could perhaps be avoided, but it would
make things more fragile (since the CachedPlanSource is sometimes
destroyed first). I suspect future improvements in error reporting will
require CachedPlans to have a copy of that string anyway, so it's not
clear that it's worth moving mountains to avoid it now.
This also changes the APIs for context statistics routines so that the
context-specific routines no longer assume that output goes straight
to stderr, nor do they know all details of the output format. This
is useful immediately to reduce code duplication, and it also allows
for external code to do something with stats output that's different
from printing to stderr.
The reason for pushing this now rather than waiting for v12 is that
it rethinks some of the API changes made by commit 9fa6f00b1. Seems
better for extension authors to endure just one round of API changes
not two.
Discussion: https://postgr.es/m/CAB=Je-FdtmFZ9y9REHD7VsSrnCkiBhsA4mdsLKSPauwXtQBeNA@mail.gmail.com
If the value of an index expression is unchanged after UPDATE,
allow HOT updates where previously we disallowed them, giving
a significant performance boost in those cases.
Particularly useful for indexes such as JSON->>field where the
JSON value changes but the indexed value does not.
Submitted as "surjective indexes" patch, now enabled by use
of new "recheck_on_update" parameter.
Author: Konstantin Knizhnik
Reviewer: Simon Riggs, with much wordsmithing and some cleanup
One of the things canonicalize_qual() does is to remove constant-NULL
subexpressions of top-level AND/OR clauses. It does that on the assumption
that what it's given is a top-level WHERE clause, so that NULL can be
treated like FALSE. Although this is documented down inside a subroutine
of canonicalize_qual(), it wasn't mentioned in the documentation of that
function itself, and some callers hadn't gotten that memo.
Notably, commit d007a9505 caused get_relation_constraints() to apply
canonicalize_qual() to CHECK constraints. That allowed constraint
exclusion to misoptimize situations in which a CHECK constraint had a
provably-NULL subclause, as seen in the regression test case added here,
in which a child table that should be scanned is not. (Although this
thinko is ancient, the test case doesn't fail before 9.2, for reasons
I've not bothered to track down in detail. There may be related cases
that do fail before that.)
More recently, commit f0e44751d added an independent bug by applying
canonicalize_qual() to index expressions, which is even sillier since
those might not even be boolean. If they are, though, I think this
could lead to making incorrect index entries for affected index
expressions in v10. I haven't attempted to prove that though.
To fix, add an "is_check" parameter to canonicalize_qual() to specify
whether it should assume WHERE or CHECK semantics, and make it perform
NULL-elimination accordingly. Adjust the callers to apply the right
semantics, or remove the call entirely in cases where it's not known
that the expression has one or the other semantics. I also removed
the call in some cases involving partition expressions, where it should
be a no-op because such expressions should be canonical already ...
and was a no-op, independently of whether it could in principle have
done something, because it was being handed the qual in implicit-AND
format which isn't what it expects. In HEAD, add an Assert to catch
that type of mistake in future.
This represents an API break for external callers of canonicalize_qual().
While that's intentional in HEAD to make such callers think about which
case applies to them, it seems like something we probably wouldn't be
thanked for in released branches. Hence, in released branches, the
extra parameter is added to a new function canonicalize_qual_ext(),
and canonicalize_qual() is a wrapper that retains its old behavior.
Patch by me with suggestions from Dean Rasheed. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/24475.1520635069@sss.pgh.pa.us
formrdesc's comment listed the specific catalogs it is called for,
but the list was out of date. Rather than jumping back onto that
maintenance treadmill, let's just remove the list. It tells the
reader nothing that can't be learned quickly and more reliably by
searching relcache.c for callers of formrdesc().
Oversight noted by Kyotaro Horiguchi.
Discussion: https://postgr.es/m/20180214.105314.138966434.horiguchi.kyotaro@lab.ntt.co.jp
The modern way is to use a missing_ok argument instead of two separate
almost-identical routines, so do that.
Author: Michaël Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180201063212.GE6398@paquier.xyz
Failure to advance the list pointer while reading partition expressions
from a list results in invoking an input function with inappropriate data,
possibly leading to crashes or, with carefully crafted input, disclosure
of arbitrary backend memory.
Bug discovered independently by Álvaro Herrera and David Rowley.
This patch is by Álvaro but owes something to David's proposed fix.
Back-patch to v10 where the issue was introduced.
Security: CVE-2018-1052
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
That function currently exists to avoid leaking memory in
CacheMemoryContext in case of trouble while the partition key is being
built, but there's a better way: allocate everything in a memcxt that
goes away if the current (sub)transaction fails, and once the partition
key is built and no further errors can occur, make the memcxt permanent
by making it a child of CacheMemoryContext.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20171027172730.eh2domlkpn4ja62m@alvherre.pgsql
This patch makes a number of interrelated changes to reduce the overhead
involved in creating/deleting memory contexts. The key ideas are:
* Include the AllocSetContext header of an aset.c context in its first
malloc request, rather than allocating it separately in TopMemoryContext.
This means that we now always create an initial or "keeper" block in an
aset, even if it never receives any allocation requests.
* Create freelists in which we can save and recycle recently-destroyed
asets (this idea is due to Robert Haas).
* In the common case where the name of a context is a constant string,
just store a pointer to it in the context header, rather than copying
the string.
The first change eliminates a palloc/pfree cycle per context, and
also avoids bloat in TopMemoryContext, at the price that creating
a context now involves a malloc/free cycle even if the context never
receives any allocations. That would be a loser for some common
usage patterns, but recycling short-lived contexts via the freelist
eliminates that pain.
Avoiding copying constant strings not only saves strlen() and strcpy()
overhead, but is an essential part of the freelist optimization because
it makes the context header size constant. Currently we make no
attempt to use the freelist for contexts with non-constant names.
(Perhaps someday we'll need to think harder about that, but in current
usage, most contexts with custom names are long-lived anyway.)
The freelist management in this initial commit is pretty simplistic,
and we might want to refine it later --- but in common workloads that
will never matter because the freelists will never get full anyway.
To create a context with a non-constant name, one is now required to
call AllocSetContextCreateExtended and specify the MEMCONTEXT_COPY_NAME
option. AllocSetContextCreate becomes a wrapper macro, and it includes
a test that will complain about non-string-literal context name
parameters on gcc and similar compilers.
An unfortunate side effect of making AllocSetContextCreate a macro is
that one is now *required* to use the size parameter abstraction macros
(ALLOCSET_DEFAULT_SIZES and friends) with it; the pre-9.6 habit of
writing out individual size parameters no longer works unless you
switch to AllocSetContextCreateExtended.
Internally to the memory-context-related modules, the context creation
APIs are simplified, removing the rather baroque original design whereby
a context-type module called mcxt.c which then called back into the
context-type module. That saved a bit of code duplication, but not much,
and it prevented context-type modules from exercising control over the
allocation of context headers.
In passing, I converted the test-and-elog validation of aset size
parameters into Asserts to save a few more cycles. The original thought
was that callers might compute size parameters on the fly, but in practice
nobody does that, so it's useless to expend cycles on checking those
numbers in production builds.
Also, mark the memory context method-pointer structs "const",
just for cleanliness.
Discussion: https://postgr.es/m/2264.1512870796@sss.pgh.pa.us
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
Hash partitioning is useful when you want to partition a growing data
set evenly. This can be useful to keep table sizes reasonable, which
makes maintenance operations such as VACUUM faster, or to enable
partition-wise join.
At present, we still depend on constraint exclusion for partitioning
pruning, and the shape of the partition constraints for hash
partitioning is such that that doesn't work. Work is underway to fix
that, which should both improve performance and make partitioning
pruning work with hash partitioning.
Amul Sul, reviewed and tested by Dilip Kumar, Ashutosh Bapat, Yugo
Nagata, Rajkumar Raghuwanshi, Jesper Pedersen, and by me. A few
final tweaks also by me.
Discussion: http://postgr.es/m/CAAJ_b96fhpJAP=ALbETmeLk1Uni_GFZD938zgenhF49qgDTjaQ@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Add docs to explain this for other backup mechanisms
Author: David Steele <david@pgmasters.net>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndQuadrant.com> et al
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Instead of duplicating the logic to search for a matching
ParamPathInfo in multiple places, factor it out into a separate
function.
Pass only the relevant bits of the PartitionKey to
partition_bounds_equal instead of the whole thing, because
partition-wise join will want to call this without having a
PartitionKey available.
Adjust allow_star_schema_join and calc_nestloop_required_outer
to take relevant Relids rather than the entire Path, because
partition-wise join will want to call it with the top-parent
relids to determine whether a child join is allowable.
Ashutosh Bapat. Review and testing of the larger patch set of which
this is a part by Amit Langote, Rajkumar Raghuwanshi, Rafia Sabih,
Thomas Munro, Dilip Kumar, and me.
Discussion: http://postgr.es/m/CA+TgmobQK80vtXjAsPZWWXd7c8u13G86gmuLupN+uUJjA+i4nA@mail.gmail.com
Add error checks in some places that were calling get_opfamily_member
or get_opfamily_proc and just assuming that the call could never fail.
Also, standardize the wording for such errors in some other places.
None of these errors are expected in normal use, hence they're just
elog not ereport. But they may be handy for diagnosing omissions in
custom opclasses.
Rushabh Lathia found the oversight in RelationBuildPartitionKey();
I found the others by grepping for all callers of these functions.
Discussion: https://postgr.es/m/CAGPqQf2R9Nk8htpv0FFi+FP776EwMyGuORpc9zYkZKC8sFQE3g@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
