This involves four different implementation strategies:
1. For Windows, we now require _configthreadlocale() to be available
and work (commit f1da075d9a), and the documentation says that the
object returned by localeconv() is in thread-local memory.
2. For glibc, we translate to nl_langinfo_l() calls, because it
offers the same information that way as an extension, and that API is
thread-safe.
3. For macOS/*BSD, use localeconv_l(), which is thread-safe.
4. For everything else, use uselocale() to set the locale for the
thread, and use a big ugly lock to defend against the returned object
being concurrently clobbered. In practice this currently means only
Solaris.
The new call is used in pg_locale.c, replacing calls to setlocale() and
localeconv().
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGJqVe0%2BPv9dvC9dSums_PXxGo9SWcxYAMBguWJUGbWz-A%40mail.gmail.com
Commit d45597f72f introduced the ability to change a not-null
constraint from NO INHERIT to INHERIT and vice versa, but we included
the SET noise word in the syntax for it. The SET turns out not to be
necessary and goes against what the SQL standard says for other ALTER
TABLE subcommands, so remove it.
This changes the way this command is processed for constraint types
other than not-null, so there are some error message changes.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Discussion: https://postgr.es/m/202503251602.vsxaehsyaoac@alvherre.pgsql
This commit adds a set of regression tests that checks various patterns
with service names and service files, with:
- Service file with no contents, used as default for PGSERVICEFILE to
prevent any lookups at the HOME directory of an environment where the
test is run.
- Service file with valid service name and its section.
- Service file at the root of PGSYSCONFDIR, named pg_service.conf.
- Missing service file.
- Service name defined as a connection parameter or as PGSERVICE.
Note that PGSYSCONFDIR is set to always point at a temporary directory
created by the test, so as we never try to look at SYSCONFDIR.
This set of tests has come up as a useful independent addition while
discussing a patch that adds an equivalent of PGSERVICEFILE as a
connection parameter as there have never been any tests for service
files and service names. Torsten Foertsch and Ryo Kanbayashi have
provided a basic implementation, that I have expanded to what is
introduced in this commit.
Author: Torsten Foertsch <tfoertsch123@gmail.com>
Author: Ryo Kanbayashi <kanbayashi.dev@gmail.com>
Author: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAKkG4_nCjx3a_F3gyXHSPWxD8Sd8URaM89wey7fG_9g7KBkOCQ@mail.gmail.com
Previously NULL nodes were ignored. This could cause issues where the
computed query ID could match for queries where fields that are next to
each other in their Node struct where one field was NULL and the other
non-NULL. For example, the Query struct had distinctClause and sortClause
next to each other. If someone wrote;
SELECT DISTINCT c1 FROM t;
and then;
SELECT c1 FROM t ORDER BY c1;
these would produce the same query ID since, in the first query, we
ignored the NULL sortClause and appended the jumble bytes for the
distictClause. In the latter query, since we did nothing for the NULL
distinctClause then jumble the non-NULL sortClause, and since the node
representation stored is the same in both cases, the query IDs were
identical.
Here we fix this by always accounting for NULL nodes by recording that
we saw a NULL in the jumble buffer. This fixes the issue as the order that
the NULL is recorded isn't the same in the above two queries.
Author: Bykov Ivan <i.bykov@modernsys.ru>
Author: Michael Paquier <michael@paquier.xyz>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/aafce7966e234372b2ba876c0193f1e9%40localhost.localdomain
The implementation of FSM for indexes is simpler than heap, where 0 is
used to track if a page is in-use and (BLCKSZ - 1) if a page is free.
One comment in indexfsm.c and one description in the documentation of
pg_freespacemap were incorrect about that.
Author: Alex Friedman <alexf01@gmail.com>
Discussion: https://postgr.es/m/71eef655-c192-453f-ac45-2772fec2cb04@gmail.com
Backpatch-through: 13
The old naming pattern (mirroring liburing's naming) was inconsistent with
the (not yet introduced) callers. It seems better to get rid of the
inconsistency now than to grow more users of the odd naming.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250326001915.bc.nmisch@google.com
Otherwise the results of e.g. temp table buffer verification errors will not
reach bufmgr.c. Obviously that's not right. Found while expanding the tests
for invalid buffer contents.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250326001915.bc.nmisch@google.com
As reported by Noah, it's possible, although practically very unlikely, that
interrupts could be processed in between pgaio_io_reopen() and
pgaio_io_perform_synchronously(). Prevent that by explicitly holding
interrupts.
It also seems good to add an assertion to pgaio_io_before_prep() to ensure
that interrupts are held, as otherwise FDs referenced by the IO could be
closed during interrupt processing. All code in the aio series currently runs
the code with interrupts held, but it seems better to be paranoid.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250324002939.5c.nmisch@google.com
There's a fair amount of information in the Plan and PlanState trees
that isn't printed by any existing EXPLAIN option. This means that,
when working on the planner, it's often necessary to rely on facilities
such as debug_print_plan, which produce excessively voluminous
output. Hence, use the new EXPLAIN extension facilities to implement
EXPLAIN (DEBUG) and EXPLAIN (RANGE_TABLE) as extensions to the core
EXPLAIN facility.
A great deal more could be done here, and the specific choices about
what to print and how are definitely arguable, but this is at least
a starting point for discussion and a jumping-off point for possible
future improvements.
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviweed-by: Andrei Lepikhov <lepihov@gmail.com> (who didn't like it)
Discussion: http://postgr.es/m/CA+TgmoZfvQUBWQ2P8iO30jywhfEAKyNzMZSR+uc2xr9PZBw6eQ@mail.gmail.com
The brin_bloom_union() function combines two BRIN summaries, by merging
one filter into the other. With bloom, we have to decompress the filters
first, but the function failed to update the summary to store the merged
filter. As a consequence, the index may be missing some of the data, and
return false negatives.
This issue exists since BRIN bloom indexes were introduced in Postgres
14, but at that point the union function was called only when two
sessions happened to summarize a range concurrently, which is rare. It
got much easier to hit in 17, as parallel builds use the union function
to merge summaries built by workers.
Fixed by storing a pointer to the decompressed filter, and freeing the
original one. Free the second filter too, if it was decompressed. The
freeing is not strictly necessary, because the union is called in
short-lived contexts, but it's tidy.
Backpatch to 14, where BRIN bloom indexes were introduced.
Reported by Arseniy Mukhin, investigation and fix by me.
Reported-by: Arseniy Mukhin
Discussion: https://postgr.es/m/18855-1cf1c8bcc22150e6%40postgresql.org
Backpatch-through: 14
It seems potentially useful to label our shared libraries with version
information, now that a facility exists for retrieving that. This
patch labels them with the PG_VERSION string. There was some
discussion about using semantic versioning conventions, but that
doesn't seem terribly helpful for modules with no SQL-level presence;
and for those that do have SQL objects, we typically expect them
to support multiple revisions of the SQL definitions, so it'd still
not be very helpful.
I did not label any of src/test/modules/. It seems unnecessary since
we don't install those, and besides there ought to be someplace that
still provides test coverage for the original PG_MODULE_MAGIC macro.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
This macro allows dynamically loaded shared libraries (modules) to
provide a wired-in module name and version, and possibly other
compile-time-constant fields in future. This information can be
retrieved with the new pg_get_loaded_modules() function.
This feature is expected to be particularly useful for modules
that do not have any exposed SQL functionality and thus are
not associated with a SQL-level extension object. But even for
modules that do belong to extensions, being able to verify the
actual code version can be useful.
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Yurii Rashkovskii <yrashk@omnigres.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
Due to a conflict in macro names on Windows between <wincrypt.h>
and <openssl/ssl.h> these headers need to be included using a
predictable pattern with an undef to handle that. The GSSAPI
header <gssapi.h> does include <wincrypt.h> which cause problems
with compiling PostgreSQL using MSVC when OpenSSL and GSSAPI are
both enabled in the tree. Rather than fixing piecemeal for each
file including gssapi headers, move the the includes and undef
to a new file which should be used to centralize the logic.
This patch is a reworked version of a patch by Imran Zaheer
proposed earlier in the thread. Once this has proven effective
in master we should look at backporting this as the problem
exist at least since v16.
Author: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Imran Zaheer <imran.zhir@gmail.com>
Reported-by: Dave Page <dpage@pgadmin.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/20240708173204.3f3xjilglx5wuzx6@awork3.anarazel.de
custom_query_jumble (introduced in 5ac462e2b7 as a node field
attribute) is now assigned to the expanded reference name "eref" of
RangeTblEntry, adding in the query jumble computation the non-qualified
aliased relation name, without the list of column names. The relation
OID is removed from the query jumbling.
The effects of this change can be seen in the tests added by
3430215fe3, where pg_stat_statements (PGSS) entries are now grouped
using the relation name, ignoring the relation search_path may point at.
For example, these two relations are different, but are now grouped in a
single PGSS entry as they are assigned the same query ID:
CREATE TABLE foo1.tab (a int);
CREATE TABLE foo2.tab (b int);
SET search_path = 'foo1';
SELECT count(*) FROM tab;
SET search_path = 'foo2';
SELECT count(*) FROM tab;
SELECT count(*) FROM foo1.tab;
SELECT count(*) FROM foo2.tab;
SELECT query, calls FROM pg_stat_statements WHERE query ~ 'FROM tab';
query | calls
--------------------------+-------
SELECT count(*) FROM tab | 4
(1 row)
It is still possible to use an alias in the FROM clause to split these.
This behavior is useful for relations re-created with the same name,
where queries based on such relations would be grouped in the same
PGSS entry. For permanent schemas, it should not really matter in
practice. The main benefit is for workloads that use a lot of temporary
relations, which are usually re-created with the same name continuously.
These can be a heavy source of bloat in PGSS depending on the workload.
Such entries can now be grouped together, improving the user experience.
The original idea from Christoph Berg used catalog lookups to find
temporary relations, something that the query jumble has never done, and
it could cause some performance regressions. The idea to use
RangeTblEntry.eref and the relation name, applying the same rules for
all relations, temporary and not temporary, has been proposed by Tom
Lane. The documentation additions have been suggested by Sami Imseih.
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Lukas Fittl <lukas@fittl.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/Z9iWXKGwkm8RAC93@msg.df7cb.de
A node field marked with custom_query_jumble and query_jumble_ignore
would generate some code of a custom routine. The script is changed so
as custom_query_jumble behaves like the other options in this case,
query_jumble_ignore taking priority, with no code generated.
A comment related to the code generated for node types was misplaced.
Thinkos introduced in 5ac462e2b7.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1324036.1742945060@sss.pgh.pa.us
We need the -I switch for libpq_srcdir to come before any -I switches
injected by configure. Otherwise there is a risk of pulling in a
mismatched version of libpq_fe.h from someplace like
/usr/local/include, if the platform has another Postgres version
installed there. This evidently accounts for today's buildfarm
failures on "anaconda".
In principle the -I switch for src/port/ is at similar hazard, and has
been for a very long time. But the only .h files we keep there are
pg_config_paths.h and pthread-win32.h, neither of which get installed
on Unix-ish systems, so the odds of picking up a conflicting header
seem pretty small. That doubtless accounts for the lack of prior
reports.
Back-patch to v17 where pg_regress acquired a build dependency on
libpq_fe.h. We could go back further to fix the hazard for src/port/
in older branches, but it seems unlikely to be worth troubling over.
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/Z-MhRzoc7t-nPUQG@nathan
Backpatch-through: 17
This new option instructs pg_upgrade to move the data directories
from the old cluster to the new cluster and then to replace the
catalog files with those generated for the new cluster. This mode
can outperform --link, --clone, --copy, and --copy-file-range,
especially on clusters with many relations.
However, this mode creates many garbage files in the old cluster,
which can prolong the file synchronization step if
--sync-method=syncfs is used. To handle that, we recommend using
--sync-method=fsync with this mode, and pg_upgrade internally uses
"initdb --sync-only --no-sync-data-files" for file synchronization.
pg_upgrade will synchronize the catalog files as they are
transferred. We assume that the database files transferred from
the old cluster were synchronized prior to upgrade.
This mode also complicates reverting to the old cluster, so we
recommend restoring from backup upon failure during or after file
transfer. We did consider teaching pg_upgrade how to generate a
revert script for such failures, but we decided against it due to
the rarity of failing during file transfer, the complexity of
generating the script, and the potential for misusing the script.
The new mode is limited to clusters located in the same file
system. With some effort, we could probably support upgrades
between different file systems, but this mode is unlikely to offer
much benefit if we have to copy the files across file system
boundaries.
It is also limited to upgrades from version 10 or newer. There are
a few known obstacles for using swap mode to upgrade from older
versions. For example, the visibility map format changed in v9.6,
and the sequence tuple format changed in v10. In fact, swap mode
omits the --sequence-data option in its uses of pg_dump and instead
reuses the old cluster's sequence data files. While teaching swap
mode to deal with these kinds of changes is surely possible (and we
may have to deal with similar problems in the future, anyway), it
doesn't seem worth the effort to support upgrades from
long-unsupported versions.
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
This new option instructs pg_dump to dump sequence data when the
--no-data, --schema-only, or --statistics-only option is specified.
This was originally considered for commit a7e5457db8, but it was
left out at that time because there was no known use-case. A
follow-up commit will use this to optimize pg_upgrade's file
transfer step.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
This new option instructs initdb to skip synchronizing any files
in database directories, the database directories themselves, and
the tablespace directories, i.e., everything in the base/
subdirectory and any other tablespace directories. Other files,
such as those in pg_wal/ and pg_xact/, will still be synchronized
unless --no-sync is also specified. --no-sync-data-files is
primarily intended for internal use by tools that separately ensure
the skipped files are synchronized to disk. A follow-up commit
will use this to help optimize pg_upgrade's file transfer step.
The --sync-method=fsync implementation of this option makes use of
a new exclude_dir parameter for walkdir(). When not NULL,
exclude_dir specifies a directory to skip processing. The
--sync-method=syncfs implementation of this option just skips
synchronizing the non-default tablespace directories. This means
that initdb will still synchronize some or all of the database
files, but there's not much we can do about that.
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
For import and export, use schemaname/relname rather than
regclass.
This is more natural during export, fits with the other arguments
better, and it gives better control over error handling in case we
need to downgrade more errors to warnings.
Also, use text for the argument types for schemaname, relname, and
attname so that casts to "name" are not required.
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=ceOSsx_=oe73QQ-BxUFR2Cwqum7-UP_fPe22DBY0NerA@mail.gmail.com
Split ATExecAlterConstraintInternal() into two functions:
ATExecAlterConstrDeferrability() and
ATExecAlterConstrInheritability(). This simplifies the code and
avoids unnecessary confusion caused by recursive code, which isn't
needed for ATExecAlterConstrInheritability().
(This also takes over the changes in commit 64224a834c, as the new
AlterConstrDeferrabilityRecurse() is essentially the old
ATExecAlterChildConstr().)
Author: Amul Sul <amul.sul@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b962c5AcYW9KUt_R_ER5qs3fUGbe4az-SP-vuwPS-w-AGA@mail.gmail.com
Small fixes for commit f4e53e10b6: Add missing calls to
InvokeObjectPostAlterHook() and also CacheInvalidateRelcache(). The
former change could have a user-visible effect. The latter omission
might have caused other bugs, but it is not clear whether one actually
existed. With these changes, the code is now more consistent with
similar ALTER CONSTRAINT variants, especially the ones that set the
deferrability.
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAF1DzPVfOW6Kk=7SSh7LbneQDJWh=PbJrEC_Wkzc24tHOyQWGg@mail.gmail.com
Previously we used pg_int64 in three function prototypes in libpq. It
was added by commit 461ef73f to expose the platform-dependent type used
for int64 in the C89 era. As of commit 962da900 it is defined as
standard int64_t, and the dust seems to have settled.
Let's just use int64_t directly in these three client-facing functions
instead of (yet) another name. We've required C99 and thus <stdint.h>
since PostgreSQL 12, C89 and C++98 compilers are long gone, and client
applications very likely use standard types for their own 64-bit needs.
This also cleans up the obscure placement of a new #include <stdint.h>
directive in postgres_ext.h, required for the new definition. The
typedef was hiding in there for historical reasons, but it doesn't fit
postgres_ext.h's own description of its purpose and there is no evidence
of client applications including postgres_ext.h directly to see it.
Keep a typedef marked deprecated for backward compatibility, but move it
into libpq-fe.h where it was used.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGKn_EkNNGMY5RzMcKP%2Ba6urT4JF%3DCPhw_zHtQwjvX6P2g%40mail.gmail.com
This option gives the possibility for query jumble to define a custom
routine for the field of a Node, extending support for
custom_query_jumble as a node field attribute. When dealing with
complex node structures, this can be simpler than having to enforce a
custom function across a full node.
Custom functions need to be defined in queryjumblefuncs.c, named as
_jumble${node}_${field}(), and use in input the JumbleState, the node
and its field. The field is not really required if we have the Node,
but it makes custom implementations somewhat easier to think about. The
code generated by gen_node_support.pl uses a macro called
JUMBLE_CUSTOM(), hiding the internals of the logic inside
queryjumblefuncs.c.
This will be used by an upcoming patch manipulating adding a custom
routine into a field of RangeTblEntry, but this facility can become
useful in more cases.
Reviewed-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/Z9y43-dRvb4EtxQ0@paquier.xyz
The entries aren't freed until the entire hash table is destroyed, so
use the Bump allocator to improve allocation speed, avoid wasting
space on the chunk header, and avoid wasting space due to the
power-of-two allocations.
Discussion: https://postgr.es/m/CAApHDvqv1aNB4cM36FzRwivXrEvBO_LsG_eQ3nqDXTjECaatOQ@mail.gmail.com
Reviewed-by: David Rowley
Until now max_files_per_process=N limited each backend to open N files in
total (minus a safety factor), even if there were already more files opened in
postmaster and inherited by backends. Change max_files_per_process to control
how many additional files each process is allowed to open.
The main motivation for this is the patch to add io_method=io_uring, which
needs to open one file for each backend. Without this patch, even if
RLIMIT_NOFILE is high enough, postmaster will fail in set_max_safe_fds() if
started with a high max_connections. The cause of the failure is that, until
now, set_max_safe_fds() subtracted the already open files from
max_files_per_process.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/w6uiicyou7hzq47mbyejubtcyb2rngkkf45fk4q7inue5kfbeo@bbfad3qyubvs
Discussion: https://postgr.es/m/CAGECzQQh6VSy3KG4pN1d=h9J=D1rStFCMR+t7yh_Kwj-g87aLQ@mail.gmail.com
This field was added in commit 0164a0f9ee to provide a way to
determine whether a storage parameter was explicitly set for the
relation or if it just picked up the default value. In most cases,
this can be accomplished by giving the storage parameter a special
out-of-range default value (e.g., the
autovacuum_vacuum_insert_threshold storage parameter defaults to
-2), but this approach doesn't work in all cases. For example, a
Boolean storage parameter cannot be given an out-of-range default,
so we need another way to discover the source of its value.
Reported-by: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-by: "David G. Johnston" <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwYKtEUYKS%2B18gRs-xPhn0qOJgM2KGyyWVCODHuVn9F-XQ%40mail.gmail.com
The bitmap heap scan skip fetch optimization skips fetching the heap
block when a page is set all-visible in the visibility map and no
columns from the table are needed to satisfy the query.
2b73a8cd33 and c3953226a0 changed the control flow of bitmap heap scan
to use the read stream API. The read stream API returns buffers
containing blocks to the user. To make this work with the skip fetch
optimization, we keep a count of the empty tuples we need to emit for
all the blocks skipped and only emit the empty tuples after processing
the next block fetched from the heap or at the end of the scan.
It's incorrect to recheck NULL tuples, so we must set `recheck` to false
before yielding control back to BitmapHeapNext(). This was done before
emitting any remaining empty tuples at the end of the scan but not for
empty tuples emitted during the scan. This meant that if a page fetched
from the heap did require recheck and set `recheck` to true and then we
emitted empty tuples for subsequent blocks, we would get wrong results.
Fix this by always setting `recheck` to false before emitting empty
tuples.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/496f7acd-881c-4df3-9bd3-8f8534dfec26%40gmail.com
When pg_recvlogical was introduced in 9.4, the --dbname option was not
required for --drop-slot. Without it, pg_recvlogical --drop-slot connected
using a replication connection (not tied to a specific database) and
was able to drop both physical and logical replication slots, similar to
pg_receivewal --drop-slot.
However, commit 0c013e08cf unintentionally changed this behavior in 9.5,
making pg_recvlogical always check whether it's connected to a specific
database and fail if it's not. This change was expected for --create-slot
and --start, which handle logical replication slots and require a database
connection, but it was unnecessary for --drop-slot, which should work with
any replication connection. As a result, --dbname became a required option
for --drop-slot.
This commit removes that restriction, restoring the original behavior and
allowing pg_recvlogical --drop-slot to work without specifying --dbname.
Although this issue originated from an unintended change, it has existed
for a long time without complaints or bug reports, and the documentation
never explicitly stated that --drop-slot should work without --dbname.
Therefore, the change is not treated as a bug fix and is applied only to
master.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/b15ecf4f-e5af-4fbb-82c2-a425f453e0b2@oss.nttdata.com
