The planner has to special-case indexes on boolean columns, because
what we need for an indexscan on such a column is a qual of the shape
of "boolvar = pseudoconstant". For plain bool constants, previous
simplification will have reduced this to "boolvar" or "NOT boolvar",
and we have to reverse that if we want to make an indexqual. There is
existing code to do so, but it only fires when the index's opfamily
is BOOL_BTREE_FAM_OID or BOOL_HASH_FAM_OID. Thus extension AMs, or
extension opclasses such as contrib/btree_gin, are out in the cold.
The reason for hard-wiring the set of relevant opfamilies was mostly
to avoid a catalog lookup in a hot code path. We can improve matters
while not taking much of a performance hit by relying on the
hard-wired set when the opfamily OID is visibly built-in, and only
checking the catalogs when dealing with an extension opfamily.
While here, rename IsBooleanOpfamily to IsBuiltinBooleanOpfamily
to remind future users of that macro of its limitations. At some
point we might want to make indxpath.c's improved version of the
test globally accessible, but it's not presently needed elsewhere.
Zongliang Quan and Tom Lane
Discussion: https://postgr.es/m/f293b91d-1d46-d386-b6bb-4b06ff5c667b@yeah.net
If contrib/btree_gist is used to make a GIST index on a char(N)
(bpchar) column, and that column is retrieved via an index-only
scan, what came out had all trailing spaces removed. Since
that doesn't happen in any other kind of table scan, this is
clearly a bug. The cause is that gbt_bpchar_compress() strips
trailing spaces (using rtrim1) before a new index entry is made.
That was probably a good idea when this code was first written,
but since we invented index-only scans, it's not so good.
One answer could be to mark this opclass as incapable of index-only
scans. But to do so, we'd need an extension module version bump,
followed by manual action by DBAs to install the updated version
of btree_gist. And it's not really a desirable place to end up,
anyway.
Instead, let's fix the code by removing the unwanted space-stripping
action and adjusting the opclass's comparison logic to ignore
trailing spaces as bpchar normally does. This will not hinder
cases that work today, since index searches with this logic will
act the same whether trailing spaces are stored or not. It will
not by itself fix the problem of getting space-stripped results
from index-only scans, of course. Users who care about that can
REINDEX affected indexes after installing this update, to immediately
replace all improperly-truncated index entries. Otherwise, it can
be expected that the index's behavior will change incrementally as
old entries are replaced by new ones.
Per report from Alexander Lakhin. Back-patch to all supported branches.
Discussion: https://postgr.es/m/696c995b-b37f-5526-f45d-04abe713179f@gmail.com
We can revert the code changes of commit b5febc1d1 now, because
commit 9a3ddeb51 installed a real solution for the difficulty
that b5febc1d1 just dodged, namely that the planner might pick
the wrong one of several index columns nominally containing the
same value. It only matters which one we pick if we pick one
that's not returnable, and that mistake is now foreclosed.
Although both of the aforementioned commits were back-patched,
I don't feel a need to take any risk by back-patching this one.
The cases that it improves are very corner-ish.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Adds bool opclass to btree_gist extension, to allow creating GiST
indexes on bool columns. GiST indexes on a single bool column don't seem
particularly useful, but this allows defining exclusion constraings
involving a bool column, for example.
Author: Emre Hasegeli
Reviewed-by: Andrey Borodin
Discussion: https://postgr.es/m/CAE2gYzyDKJBZngssR84VGZEN=Ux=V9FV23QfPgo+7-yYnKKg4g@mail.gmail.com
This reverts commit 9f984ba6d23dc6eecebf479ab1d3f2e550a4e9be.
It was making the buildfarm unhappy, apparently setting client_min_messages
in a regression test produces different output if log_statement='all'.
Another issue is that I now suspect the bit sortsupport function was in
fact not correct to call byteacmp(). Revert to investigate both of those
issues.
Previously, floating-point output was done by rounding to a specific
decimal precision; by default, to 6 or 15 decimal digits (losing
information) or as requested using extra_float_digits. Drivers that
wanted exact float values, and applications like pg_dump that must
preserve values exactly, set extra_float_digits=3 (or sometimes 2 for
historical reasons, though this isn't enough for float4).
Unfortunately, decimal rounded output is slow enough to become a
noticable bottleneck when dealing with large result sets or COPY of
large tables when many floating-point values are involved.
Floating-point output can be done much faster when the output is not
rounded to a specific decimal length, but rather is chosen as the
shortest decimal representation that is closer to the original float
value than to any other value representable in the same precision. The
recently published Ryu algorithm by Ulf Adams is both relatively
simple and remarkably fast.
Accordingly, change float4out/float8out to output shortest decimal
representations if extra_float_digits is greater than 0, and make that
the new default. Applications that need rounded output can set
extra_float_digits back to 0 or below, and take the resulting
performance hit.
We make one concession to portability for systems with buggy
floating-point input: we do not output decimal values that fall
exactly halfway between adjacent representable binary values (which
would rely on the reader doing round-to-nearest-even correctly). This
is known to be a problem at least for VS2013 on Windows.
Our version of the Ryu code originates from
https://github.com/ulfjack/ryu/ at commit c9c3fb1979, but with the
following (significant) modifications:
- Output format is changed to use fixed-point notation for small
exponents, as printf would, and also to use lowercase 'e', a
minimum of 2 exponent digits, and a mandatory sign on the exponent,
to keep the formatting as close as possible to previous output.
- The output of exact midpoint values is disabled as noted above.
- The integer fast-path code is changed somewhat (since we have
fixed-point output and the upstream did not).
- Our project style has been largely applied to the code with the
exception of C99 declaration-after-statement, which has been
retained as an exception to our present policy.
- Most of upstream's debugging and conditionals are removed, and we
use our own configure tests to determine things like uint128
availability.
Changing the float output format obviously affects a number of
regression tests. This patch uses an explicit setting of
extra_float_digits=0 for test output that is not expected to be
exactly reproducible (e.g. due to numerical instability or differing
algorithms for transcendental functions).
Conversions from floats to numeric are unchanged by this patch. These
may appear in index expressions and it is not yet clear whether any
change should be made, so that can be left for another day.
This patch assumes that the only supported floating point format is
now IEEE format, and the documentation is updated to reflect that.
Code by me, adapting the work of Ulf Adams and other contributors.
References:
https://dl.acm.org/citation.cfm?id=3192369
Reviewed-by: Tom Lane, Andres Freund, Donald Dong
Discussion: https://postgr.es/m/87r2el1bx6.fsf@news-spur.riddles.org.uk
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Commit b5febc1d1 added a contrib/btree_gist test case that has been
observed to fail in the buildfarm as a result of background auto-analyze
updating stats and changing the selected plan. Forestall that by
forcibly analyzing in foreground, instead. The new plan choice is
just as good for our purposes, since we really only care that an
index-only plan does not get selected.
Back-patch to 9.5, like the previous patch.
Discussion: https://postgr.es/m/14643.1539629304@sss.pgh.pa.us
Up to now, get_const_expr() insisted on prefixing BIT and VARBIT
literals with 'B'. That's not really necessary, because we always
append explicit-cast syntax to identify the constant's type.
Moreover, it's subtly wrong for VARBIT, because the parser will
interpret B'...' as '...'::"bit"; see make_const() which explicitly
assigns type BITOID for a T_BitString literal. So what had been
a simple VARBIT literal is reconstructed as ('...'::"bit")::varbit,
which is not the same thing, at least not before constant folding.
This results in odd differences after dump/restore, as complained
of by the patch submitter, and it could result in actual failures in
partitioning or inheritance DDL operations (see commit 542320c2b,
which repaired similar misbehaviors for some other data types).
Fixing it is pretty easy: just remove the special case and let the
default code path handle these types. We could have kept the special
case for BIT only, but there seems little point in that.
Like the previous patch, I judge that back-patching this into stable
branches wouldn't be a good idea. However, it seems not quite too
late for v11, so let's fix it there.
Paul Guo, reviewed by Davy Machado and John Naylor, minor adjustments
by me
Discussion: https://postgr.es/m/CABQrizdTra=2JEqA6+Ms1D1k1Kqw+aiBBhC9TreuZRX2JzxLAA@mail.gmail.com
Since 9.5, it's possible that some but not all columns of an index
support returning the indexed value for index-only scans. If the
same indexed column appears in index columns that behave both ways,
check_index_only() supposed that it'd be OK to do an index-only scan
testing that column; but that fails if we have to recheck the indexed
condition on one of the columns that doesn't support this.
In principle we could make this work by remapping the recheck expressions
to pull the value from a column that does support returning the indexed
value. But such cases are so weird and rare that, at least for now,
it doesn't seem worth the trouble. Instead, just teach check_index_only
that a value is returnable only if all the index columns containing it
are returnable, rather than any of them.
Per report from David Pereiro Lagares. Back-patch to 9.5 where the
possibility of this situation appeared.
Kyotaro Horiguchi
Discussion: https://postgr.es/m/1516210494.1798.16.camel@nlpgo.com
This will allow enums to be used in exclusion constraints.
The code uses the new CallerFInfoFunctionCall infrastructure in fmgr,
and the support for it added to btree_gist in commit 393bb504d7.
Reviewed by Tom Lane and Anastasia Lubennikova
Discussion: http://postgr.es/m/56EA8A71.8060107@dunslane.net
This adds in support for EUI-64 MAC addresses by adding a new data type
called 'macaddr8' (using our usual convention of indicating the number
of bytes stored).
This was largely a copy-and-paste from the macaddr data type, with
appropriate adjustments for having 8 bytes instead of 6 and adding
support for converting a provided EUI-48 (6 byte format) to the EUI-64
format. Conversion from EUI-48 to EUI-64 inserts FFFE as the 4th and
5th bytes but does not perform the IPv6 modified EUI-64 action of
flipping the 7th bit, but we add a function to perform that specific
action for the user as it may be commonly done by users who wish to
calculate their IPv6 address based on their network prefix and 48-bit
MAC address.
Author: Haribabu Kommi, with a good bit of rework of macaddr8_in by me.
Reviewed by: Vitaly Burovoy, Kuntal Ghosh
Discussion: https://postgr.es/m/CAJrrPGcUi8ZH+KkK+=TctNQ+EfkeCEHtMU_yo1mvX8hsk_ghNQ@mail.gmail.com
I'd supposed that people would do this manually when creating new operator
classes, but the folly of that was exposed today. The tests seem fast
enough that we can just apply them during the normal regression tests.
contrib/isn fails the checks for lack of complete sets of cross-type
operators. That's a nice-to-have policy rather than a functional
requirement, so leave it as-is, but insert ORDER BY in the query to
ensure consistent cross-platform output.
Discussion: https://postgr.es/m/7076.1480446837@sss.pgh.pa.us
Fix still another bug in commit 35fcb1b3d: it failed to fully initialize
the SortSupport states it introduced to allow the executor to re-check
ORDER BY expressions containing distance operators. That led to a null
pointer dereference if the sortsupport code tried to use ssup_cxt. The
problem only manifests in narrow cases, explaining the lack of previous
field reports. It requires a GiST-indexable distance operator that lacks
SortSupport and is on a pass-by-ref data type, which among core+contrib
seems to be only btree_gist's interval opclass; and it requires the scan
to be done as an IndexScan not an IndexOnlyScan, which explains how
btree_gist's regression test didn't catch it. Per bug #14134 from
Jihyun Yu.
Peter Geoghegan
Report: <20160511154904.2603.43889@wrigleys.postgresql.org>
Buildfarm member skink failed with symptoms suggesting that an
auto-analyze had happened and changed the plan displayed for a
test query. Although this is evidently of low probability,
regression tests that sometimes fail are no fun, so add commands
to force a bitmap scan to be chosen.
The previous coding in get_const_expr() tried to avoid quoting integer,
float, and numeric literals if at all possible. While that looks nice,
it means that dumped expressions might re-parse to something that's
semantically equivalent but not the exact same parsetree; for example
a FLOAT8 constant would re-parse as a NUMERIC constant with a cast to
FLOAT8. Though the result would be the same after constant-folding,
this is problematic in certain contexts. In particular, Jeff Davis
pointed out that this could cause unexpected failures in ALTER INHERIT
operations because of child tables having not-exactly-equivalent CHECK
expressions. Therefore, favor correctness over legibility and dump
such constants in quotes except in the limited cases where they'll
be interpreted as the same type even without any casting.
This results in assorted small changes in the regression test outputs,
and will affect display of user-defined views and rules similarly.
The odds of that causing problems in the field seem non-negligible;
given the lack of previous complaints, it seems best not to change
this in the back branches.
inet, cidr, and timetz indexes still cannot support index-only scans,
because they don't store the original unmodified value in the index, but a
derived approximate value.
This isn't fully tested as yet, in particular I'm not sure that the
"foo--unpackaged--1.0.sql" scripts are OK. But it's time to get some
buildfarm cycles on it.
sepgsql is not converted to an extension, mainly because it seems to
require a very nonstandard installation process.
Dimitri Fontaine and Tom Lane
about best practice for including the module creation scripts: to wit
that you should suppress NOTICE messages. This avoids creating
regression failures by adding or removing comment lines in the module
scripts.
calculations for interval and time/timetz to behave sanely for both
integer and float timestamps; up to now I think it's been doing
something pretty strange...
- Fix wrong index results on text, char, varchar for multibyte strings
- Fix some SIGFPE signals
- Add support for infinite timestamps
- Because of locale settings, btree_gist can not be a prefix index anymore (for text).
Each node holds now just the lower and upper boundary.
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
Create objects in public schema.
Make spacing/capitalization consistent.
Remove transaction block use for object creation.
Remove unneeded function GRANTs.
