Standardize LSN formatting by zero padding

This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages.  Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding.  This often led to confusion when comparing.

To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.

Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM

contrib/amcheck/verify_nbtree.c

@@ -913,7 +913,7 @@ bt_report_duplicate(BtreeCheckState *state,
 			(errcode(ERRCODE_INDEX_CORRUPTED),
 			 errmsg("index uniqueness is violated for index \"%s\"",
 					RelationGetRelationName(state->rel)),
-			 errdetail("Index %s%s and%s%s (point to heap %s and %s) page lsn=%X/%X.",
+			 errdetail("Index %s%s and%s%s (point to heap %s and %s) page lsn=%X/%08X.",
 					   itid, pposting, nitid, pnposting, htid, nhtid,
 					   LSN_FORMAT_ARGS(state->targetlsn))));
 }
@@ -1058,7 +1058,7 @@ bt_leftmost_ignoring_half_dead(BtreeCheckState *state,
 					(errcode(ERRCODE_NO_DATA),
 					 errmsg_internal("harmless interrupted page deletion detected in index \"%s\"",
 									 RelationGetRelationName(state->rel)),
-					 errdetail_internal("Block=%u right block=%u page lsn=%X/%X.",
+					 errdetail_internal("Block=%u right block=%u page lsn=%X/%08X.",
 										reached, reached_from,
 										LSN_FORMAT_ARGS(pagelsn))));
 
@@ -1283,7 +1283,7 @@ bt_target_page_check(BtreeCheckState *state)
 					(errcode(ERRCODE_INDEX_CORRUPTED),
 					 errmsg("wrong number of high key index tuple attributes in index \"%s\"",
 							RelationGetRelationName(state->rel)),
-					 errdetail_internal("Index block=%u natts=%u block type=%s page lsn=%X/%X.",
+					 errdetail_internal("Index block=%u natts=%u block type=%s page lsn=%X/%08X.",
 										state->targetblock,
 										BTreeTupleGetNAtts(itup, state->rel),
 										P_ISLEAF(topaque) ? "heap" : "index",
@@ -1332,7 +1332,7 @@ bt_target_page_check(BtreeCheckState *state)
 					(errcode(ERRCODE_INDEX_CORRUPTED),
 					 errmsg("index tuple size does not equal lp_len in index \"%s\"",
 							RelationGetRelationName(state->rel)),
-					 errdetail_internal("Index tid=(%u,%u) tuple size=%zu lp_len=%u page lsn=%X/%X.",
+					 errdetail_internal("Index tid=(%u,%u) tuple size=%zu lp_len=%u page lsn=%X/%08X.",
 										state->targetblock, offset,
 										tupsize, ItemIdGetLength(itemid),
 										LSN_FORMAT_ARGS(state->targetlsn)),
@@ -1356,7 +1356,7 @@ bt_target_page_check(BtreeCheckState *state)
 					(errcode(ERRCODE_INDEX_CORRUPTED),
 					 errmsg("wrong number of index tuple attributes in index \"%s\"",
 							RelationGetRelationName(state->rel)),
-					 errdetail_internal("Index tid=%s natts=%u points to %s tid=%s page lsn=%X/%X.",
+					 errdetail_internal("Index tid=%s natts=%u points to %s tid=%s page lsn=%X/%08X.",
 										itid,
 										BTreeTupleGetNAtts(itup, state->rel),
 										P_ISLEAF(topaque) ? "heap" : "index",
@@ -1406,7 +1406,7 @@ bt_target_page_check(BtreeCheckState *state)
 					(errcode(ERRCODE_INDEX_CORRUPTED),
 					 errmsg("could not find tuple using search from root page in index \"%s\"",
 							RelationGetRelationName(state->rel)),
-					 errdetail_internal("Index tid=%s points to heap tid=%s page lsn=%X/%X.",
+					 errdetail_internal("Index tid=%s points to heap tid=%s page lsn=%X/%08X.",
 										itid, htid,
 										LSN_FORMAT_ARGS(state->targetlsn))));
 		}
@@ -1435,7 +1435,7 @@ bt_target_page_check(BtreeCheckState *state)
 							(errcode(ERRCODE_INDEX_CORRUPTED),
 							 errmsg_internal("posting list contains misplaced TID in index \"%s\"",
 											 RelationGetRelationName(state->rel)),
-							 errdetail_internal("Index tid=%s posting list offset=%d page lsn=%X/%X.",
+							 errdetail_internal("Index tid=%s posting list offset=%d page lsn=%X/%08X.",
 												itid, i,
 												LSN_FORMAT_ARGS(state->targetlsn))));
 				}
@@ -1488,7 +1488,7 @@ bt_target_page_check(BtreeCheckState *state)
 					(errcode(ERRCODE_INDEX_CORRUPTED),
 					 errmsg("index row size %zu exceeds maximum for index \"%s\"",
 							tupsize, RelationGetRelationName(state->rel)),
-					 errdetail_internal("Index tid=%s points to %s tid=%s page lsn=%X/%X.",
+					 errdetail_internal("Index tid=%s points to %s tid=%s page lsn=%X/%08X.",
 										itid,
 										P_ISLEAF(topaque) ? "heap" : "index",
 										htid,
@@ -1595,7 +1595,7 @@ bt_target_page_check(BtreeCheckState *state)
 					(errcode(ERRCODE_INDEX_CORRUPTED),
 					 errmsg("high key invariant violated for index \"%s\"",
 							RelationGetRelationName(state->rel)),
-					 errdetail_internal("Index tid=%s points to %s tid=%s page lsn=%X/%X.",
+					 errdetail_internal("Index tid=%s points to %s tid=%s page lsn=%X/%08X.",
 										itid,
 										P_ISLEAF(topaque) ? "heap" : "index",
 										htid,
@@ -1641,9 +1641,7 @@ bt_target_page_check(BtreeCheckState *state)
 					(errcode(ERRCODE_INDEX_CORRUPTED),
 					 errmsg("item order invariant violated for index \"%s\"",
 							RelationGetRelationName(state->rel)),
-					 errdetail_internal("Lower index tid=%s (points to %s tid=%s) "
+					 errdetail_internal("Lower index tid=%s (points to %s tid=%s) higher index tid=%s (points to %s tid=%s) page lsn=%X/%08X.",
-										"higher index tid=%s (points to %s tid=%s) "
-										"page lsn=%X/%X.",
 										itid,
 										P_ISLEAF(topaque) ? "heap" : "index",
 										htid,
@@ -1760,7 +1758,7 @@ bt_target_page_check(BtreeCheckState *state)
 						(errcode(ERRCODE_INDEX_CORRUPTED),
 						 errmsg("cross page item order invariant violated for index \"%s\"",
 								RelationGetRelationName(state->rel)),
-						 errdetail_internal("Last item on page tid=(%u,%u) page lsn=%X/%X.",
+						 errdetail_internal("Last item on page tid=(%u,%u) page lsn=%X/%08X.",
 											state->targetblock, offset,
 											LSN_FORMAT_ARGS(state->targetlsn))));
 			}
@@ -1813,7 +1811,7 @@ bt_target_page_check(BtreeCheckState *state)
 								(errcode(ERRCODE_INDEX_CORRUPTED),
 								 errmsg("right block of leaf block is non-leaf for index \"%s\"",
 										RelationGetRelationName(state->rel)),
-								 errdetail_internal("Block=%u page lsn=%X/%X.",
+								 errdetail_internal("Block=%u page lsn=%X/%08X.",
 													state->targetblock,
 													LSN_FORMAT_ARGS(state->targetlsn))));
 
@@ -2237,7 +2235,7 @@ bt_child_highkey_check(BtreeCheckState *state,
 					(errcode(ERRCODE_INDEX_CORRUPTED),
 					 errmsg("the first child of leftmost target page is not leftmost of its level in index \"%s\"",
 							RelationGetRelationName(state->rel)),
-					 errdetail_internal("Target block=%u child block=%u target page lsn=%X/%X.",
+					 errdetail_internal("Target block=%u child block=%u target page lsn=%X/%08X.",
 										state->targetblock, blkno,
 										LSN_FORMAT_ARGS(state->targetlsn))));
 
@@ -2323,7 +2321,7 @@ bt_child_highkey_check(BtreeCheckState *state,
 								(errcode(ERRCODE_INDEX_CORRUPTED),
 								 errmsg("child high key is greater than rightmost pivot key on target level in index \"%s\"",
 										RelationGetRelationName(state->rel)),
-								 errdetail_internal("Target block=%u child block=%u target page lsn=%X/%X.",
+								 errdetail_internal("Target block=%u child block=%u target page lsn=%X/%08X.",
 													state->targetblock, blkno,
 													LSN_FORMAT_ARGS(state->targetlsn))));
 					pivotkey_offset = P_HIKEY;
@@ -2353,7 +2351,7 @@ bt_child_highkey_check(BtreeCheckState *state,
 							(errcode(ERRCODE_INDEX_CORRUPTED),
 							 errmsg("can't find left sibling high key in index \"%s\"",
 									RelationGetRelationName(state->rel)),
-							 errdetail_internal("Target block=%u child block=%u target page lsn=%X/%X.",
+							 errdetail_internal("Target block=%u child block=%u target page lsn=%X/%08X.",
 												state->targetblock, blkno,
 												LSN_FORMAT_ARGS(state->targetlsn))));
 				itup = state->lowkey;
@@ -2365,7 +2363,7 @@ bt_child_highkey_check(BtreeCheckState *state,
 						(errcode(ERRCODE_INDEX_CORRUPTED),
 						 errmsg("mismatch between parent key and child high key in index \"%s\"",
 								RelationGetRelationName(state->rel)),
-						 errdetail_internal("Target block=%u child block=%u target page lsn=%X/%X.",
+						 errdetail_internal("Target block=%u child block=%u target page lsn=%X/%08X.",
 											state->targetblock, blkno,
 											LSN_FORMAT_ARGS(state->targetlsn))));
 			}
@@ -2505,7 +2503,7 @@ bt_child_check(BtreeCheckState *state, BTScanInsert targetkey,
 				(errcode(ERRCODE_INDEX_CORRUPTED),
 				 errmsg("downlink to deleted page found in index \"%s\"",
 						RelationGetRelationName(state->rel)),
-				 errdetail_internal("Parent block=%u child block=%u parent page lsn=%X/%X.",
+				 errdetail_internal("Parent block=%u child block=%u parent page lsn=%X/%08X.",
 									state->targetblock, childblock,
 									LSN_FORMAT_ARGS(state->targetlsn))));
 
@@ -2546,7 +2544,7 @@ bt_child_check(BtreeCheckState *state, BTScanInsert targetkey,
 					(errcode(ERRCODE_INDEX_CORRUPTED),
 					 errmsg("down-link lower bound invariant violated for index \"%s\"",
 							RelationGetRelationName(state->rel)),
-					 errdetail_internal("Parent block=%u child index tid=(%u,%u) parent page lsn=%X/%X.",
+					 errdetail_internal("Parent block=%u child index tid=(%u,%u) parent page lsn=%X/%08X.",
 										state->targetblock, childblock, offset,
 										LSN_FORMAT_ARGS(state->targetlsn))));
 	}
@@ -2616,7 +2614,7 @@ bt_downlink_missing_check(BtreeCheckState *state, bool rightsplit,
 				(errcode(ERRCODE_NO_DATA),
 				 errmsg_internal("harmless interrupted page split detected in index \"%s\"",
 								 RelationGetRelationName(state->rel)),
-				 errdetail_internal("Block=%u level=%u left sibling=%u page lsn=%X/%X.",
+				 errdetail_internal("Block=%u level=%u left sibling=%u page lsn=%X/%08X.",
 									blkno, opaque->btpo_level,
 									opaque->btpo_prev,
 									LSN_FORMAT_ARGS(pagelsn))));
@@ -2638,7 +2636,7 @@ bt_downlink_missing_check(BtreeCheckState *state, bool rightsplit,
 				(errcode(ERRCODE_INDEX_CORRUPTED),
 				 errmsg("leaf index block lacks downlink in index \"%s\"",
 						RelationGetRelationName(state->rel)),
-				 errdetail_internal("Block=%u page lsn=%X/%X.",
+				 errdetail_internal("Block=%u page lsn=%X/%08X.",
 									blkno,
 									LSN_FORMAT_ARGS(pagelsn))));
 
@@ -2704,7 +2702,7 @@ bt_downlink_missing_check(BtreeCheckState *state, bool rightsplit,
 				(errcode(ERRCODE_INDEX_CORRUPTED),
 				 errmsg_internal("downlink to deleted leaf page found in index \"%s\"",
 								 RelationGetRelationName(state->rel)),
-				 errdetail_internal("Top parent/target block=%u leaf block=%u top parent/under check lsn=%X/%X.",
+				 errdetail_internal("Top parent/target block=%u leaf block=%u top parent/under check lsn=%X/%08X.",
 									blkno, childblk,
 									LSN_FORMAT_ARGS(pagelsn))));
 
@@ -2730,7 +2728,7 @@ bt_downlink_missing_check(BtreeCheckState *state, bool rightsplit,
 			(errcode(ERRCODE_INDEX_CORRUPTED),
 			 errmsg("internal index block lacks downlink in index \"%s\"",
 					RelationGetRelationName(state->rel)),
-			 errdetail_internal("Block=%u level=%u page lsn=%X/%X.",
+			 errdetail_internal("Block=%u level=%u page lsn=%X/%08X.",
 								blkno, opaque->btpo_level,
 								LSN_FORMAT_ARGS(pagelsn))));
 }

contrib/pageinspect/expected/gist.out

@@ -6,20 +6,20 @@ CREATE INDEX test_gist_idx ON test_gist USING gist (p);
 -- Page 0 is the root, the rest are leaf pages
 SELECT * FROM gist_page_opaque_info(get_raw_page('test_gist_idx', 0));
     lsn     |    nsn     | rightlink  | flags 
------+-----+------------+-------
+------------+------------+------------+-------
- 0/1 | 0/0 | 4294967295 | {}
+ 0/00000001 | 0/00000000 | 4294967295 | {}
 (1 row)
 
 SELECT * FROM gist_page_opaque_info(get_raw_page('test_gist_idx', 1));
     lsn     |    nsn     | rightlink  | flags  
------+-----+------------+--------
+------------+------------+------------+--------
- 0/1 | 0/0 | 4294967295 | {leaf}
+ 0/00000001 | 0/00000000 | 4294967295 | {leaf}
 (1 row)
 
 SELECT * FROM gist_page_opaque_info(get_raw_page('test_gist_idx', 2));
     lsn     |    nsn     | rightlink | flags  
------+-----+-----------+--------
+------------+------------+-----------+--------
- 0/1 | 0/0 |         1 | {leaf}
+ 0/00000001 | 0/00000000 |         1 | {leaf}
 (1 row)
 
 SELECT * FROM gist_page_items(get_raw_page('test_gist_idx', 0), 'test_gist_idx');

contrib/pageinspect/expected/page.out

@@ -266,8 +266,8 @@ SELECT fsm_page_contents(decode(repeat('00', :block_size), 'hex'));
 
 SELECT page_header(decode(repeat('00', :block_size), 'hex'));
          page_header          
------------------------
+------------------------------
- (0/0,0,0,0,0,0,0,0,0)
+ (0/00000000,0,0,0,0,0,0,0,0)
 (1 row)
 
 SELECT page_checksum(decode(repeat('00', :block_size), 'hex'), 1);

contrib/pageinspect/rawpage.c

@@ -282,7 +282,7 @@ page_header(PG_FUNCTION_ARGS)
 	{
 		char		lsnchar[64];
 
-		snprintf(lsnchar, sizeof(lsnchar), "%X/%X", LSN_FORMAT_ARGS(lsn));
+		snprintf(lsnchar, sizeof(lsnchar), "%X/%08X", LSN_FORMAT_ARGS(lsn));
 		values[0] = CStringGetTextDatum(lsnchar);
 	}
 	else

contrib/pg_walinspect/expected/pg_walinspect.out

@@ -19,14 +19,14 @@ INSERT INTO sample_tbl SELECT * FROM generate_series(3, 4);
 -- ===================================================================
 -- Invalid input LSN.
 SELECT * FROM pg_get_wal_record_info('0/0');
-ERROR:  could not read WAL at LSN 0/0
+ERROR:  could not read WAL at LSN 0/00000000
 -- Invalid start LSN.
 SELECT * FROM pg_get_wal_records_info('0/0', :'wal_lsn1');
-ERROR:  could not read WAL at LSN 0/0
+ERROR:  could not read WAL at LSN 0/00000000
 SELECT * FROM pg_get_wal_stats('0/0', :'wal_lsn1');
-ERROR:  could not read WAL at LSN 0/0
+ERROR:  could not read WAL at LSN 0/00000000
 SELECT * FROM pg_get_wal_block_info('0/0', :'wal_lsn1');
-ERROR:  could not read WAL at LSN 0/0
+ERROR:  could not read WAL at LSN 0/00000000
 -- Start LSN > End LSN.
 SELECT * FROM pg_get_wal_records_info(:'wal_lsn2', :'wal_lsn1');
 ERROR:  WAL start LSN must be less than end LSN

contrib/pg_walinspect/pg_walinspect.c

@@ -105,7 +105,7 @@ InitXLogReaderState(XLogRecPtr lsn)
 	if (lsn < XLOG_BLCKSZ)
 		ereport(ERROR,
 				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
-				 errmsg("could not read WAL at LSN %X/%X",
+				 errmsg("could not read WAL at LSN %X/%08X",
 						LSN_FORMAT_ARGS(lsn))));
 
 	private_data = (ReadLocalXLogPageNoWaitPrivate *)
@@ -128,8 +128,8 @@ InitXLogReaderState(XLogRecPtr lsn)
 
 	if (XLogRecPtrIsInvalid(first_valid_record))
 		ereport(ERROR,
-				(errmsg("could not find a valid record after %X/%X",
+				errmsg("could not find a valid record after %X/%08X",
-						LSN_FORMAT_ARGS(lsn))));
+					   LSN_FORMAT_ARGS(lsn)));
 
 	return xlogreader;
 }
@@ -168,12 +168,12 @@ ReadNextXLogRecord(XLogReaderState *xlogreader)
 		if (errormsg)
 			ereport(ERROR,
 					(errcode_for_file_access(),
-					 errmsg("could not read WAL at %X/%X: %s",
+					 errmsg("could not read WAL at %X/%08X: %s",
 							LSN_FORMAT_ARGS(xlogreader->EndRecPtr), errormsg)));
 		else
 			ereport(ERROR,
 					(errcode_for_file_access(),
-					 errmsg("could not read WAL at %X/%X",
+					 errmsg("could not read WAL at %X/%08X",
 							LSN_FORMAT_ARGS(xlogreader->EndRecPtr))));
 	}
 
@@ -479,7 +479,7 @@ pg_get_wal_record_info(PG_FUNCTION_ARGS)
 		ereport(ERROR,
 				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
 				 errmsg("WAL input LSN must be less than current LSN"),
-				 errdetail("Current WAL LSN on the database system is at %X/%X.",
+				 errdetail("Current WAL LSN on the database system is at %X/%08X.",
 						   LSN_FORMAT_ARGS(curr_lsn))));
 
 	/* Build a tuple descriptor for our result type. */
@@ -491,7 +491,7 @@ pg_get_wal_record_info(PG_FUNCTION_ARGS)
 	if (!ReadNextXLogRecord(xlogreader))
 		ereport(ERROR,
 				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
-				 errmsg("could not read WAL at %X/%X",
+				 errmsg("could not read WAL at %X/%08X",
 						LSN_FORMAT_ARGS(xlogreader->EndRecPtr))));
 
 	GetWALRecordInfo(xlogreader, values, nulls, PG_GET_WAL_RECORD_INFO_COLS);
@@ -521,7 +521,7 @@ ValidateInputLSNs(XLogRecPtr start_lsn, XLogRecPtr *end_lsn)
 		ereport(ERROR,
 				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
 				 errmsg("WAL start LSN must be less than current LSN"),
-				 errdetail("Current WAL LSN on the database system is at %X/%X.",
+				 errdetail("Current WAL LSN on the database system is at %X/%08X.",
 						   LSN_FORMAT_ARGS(curr_lsn))));
 
 	if (start_lsn > *end_lsn)
@@ -827,7 +827,7 @@ pg_get_wal_records_info_till_end_of_wal(PG_FUNCTION_ARGS)
 		ereport(ERROR,
 				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
 				 errmsg("WAL start LSN must be less than current LSN"),
-				 errdetail("Current WAL LSN on the database system is at %X/%X.",
+				 errdetail("Current WAL LSN on the database system is at %X/%08X.",
 						   LSN_FORMAT_ARGS(end_lsn))));
 
 	GetWALRecordsInfo(fcinfo, start_lsn, end_lsn);
@@ -846,7 +846,7 @@ pg_get_wal_stats_till_end_of_wal(PG_FUNCTION_ARGS)
 		ereport(ERROR,
 				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
 				 errmsg("WAL start LSN must be less than current LSN"),
-				 errdetail("Current WAL LSN on the database system is at %X/%X.",
+				 errdetail("Current WAL LSN on the database system is at %X/%08X.",
 						   LSN_FORMAT_ARGS(end_lsn))));
 
 	GetWalStats(fcinfo, start_lsn, end_lsn, stats_per_record);

doc/src/sgml/catalogs.sgml

@@ -7971,7 +7971,7 @@ SCRAM-SHA-256$<replaceable>&lt;iteration count&gt;</replaceable>:<replaceable>&l
       </para>
       <para>
        Finish LSN of the transaction whose changes are to be skipped, if a valid
-       LSN; otherwise <literal>0/0</literal>.
+       LSN; otherwise <literal>0/0000000</literal>.
       </para></entry>
      </row>
 

doc/src/sgml/logical-replication.sgml

@@ -575,8 +575,8 @@ HINT:  To initiate replication, you must manually create the replication slot, e
 <programlisting>
 /* pub # */ SELECT * FROM pg_create_logical_replication_slot('sub1', 'pgoutput');
  slot_name |    lsn
------------+-----------
+-----------+------------
- sub1      | 0/19404D0
+ sub1      | 0/019404D0
 (1 row)
 </programlisting></para>
      </listitem>
@@ -617,8 +617,8 @@ HINT:  To initiate replication, you must manually create the replication slot, e
 <programlisting>
 /* pub # */ SELECT * FROM pg_create_logical_replication_slot('myslot', 'pgoutput');
  slot_name |    lsn
------------+-----------
+-----------+------------
- myslot    | 0/19059A0
+ myslot    | 0/019059A0
 (1 row)
 </programlisting></para>
      </listitem>
@@ -655,8 +655,8 @@ HINT:  To initiate replication, you must manually create the replication slot, e
 <programlisting>
 /* pub # */ SELECT * FROM pg_create_logical_replication_slot('myslot', 'pgoutput');
  slot_name |    lsn
------------+-----------
+-----------+------------
- myslot    | 0/1905930
+ myslot    | 0/01905930
 (1 row)
 </programlisting></para>
      </listitem>
@@ -1965,15 +1965,15 @@ DETAIL:  <replaceable class="parameter">detailed_explanation</replaceable>.
 ERROR:  conflict detected on relation "public.test": conflict=insert_exists
 DETAIL:  Key already exists in unique index "t_pkey", which was modified locally in transaction 740 at 2024-06-26 10:47:04.727375+08.
 Key (c)=(1); existing local tuple (1, 'local'); remote tuple (1, 'remote').
-CONTEXT:  processing remote data for replication origin "pg_16395" during "INSERT" for replication target relation "public.test" in transaction 725 finished at 0/14C0378
+CONTEXT:  processing remote data for replication origin "pg_16395" during "INSERT" for replication target relation "public.test" in transaction 725 finished at 0/014C0378
 </screen>
    The LSN of the transaction that contains the change violating the constraint and
-   the replication origin name can be found from the server log (LSN 0/14C0378 and
+   the replication origin name can be found from the server log (LSN 0/014C0378 and
    replication origin <literal>pg_16395</literal> in the above case).  The
    transaction that produced the conflict can be skipped by using
    <link linkend="sql-altersubscription-params-skip"><command>ALTER SUBSCRIPTION ... SKIP</command></link>
    with the finish LSN
-   (i.e., LSN 0/14C0378).  The finish LSN could be an LSN at which the transaction
+   (i.e., LSN 0/014C0378).  The finish LSN could be an LSN at which the transaction
    is committed or prepared on the publisher.  Alternatively, the transaction can
    also be skipped by calling the <link linkend="pg-replication-origin-advance">
    <function>pg_replication_origin_advance()</function></link> function.
@@ -1984,7 +1984,7 @@ CONTEXT:  processing remote data for replication origin "pg_16395" during "INSER
    <link linkend="sql-createsubscription-params-with-disable-on-error"><literal>disable_on_error</literal></link>
    option. Then, you can use <function>pg_replication_origin_advance()</function>
    function with the <parameter>node_name</parameter> (i.e., <literal>pg_16395</literal>)
-   and the next LSN of the finish LSN (i.e., 0/14C0379).  The current position of
+   and the next LSN of the finish LSN (i.e., 0/014C0379).  The current position of
    origins can be seen in the <link linkend="view-pg-replication-origin-status">
    <structname>pg_replication_origin_status</structname></link> system view.
    Please note that skipping the whole transaction includes skipping changes that

doc/src/sgml/logicaldecoding.sgml

@@ -57,14 +57,14 @@
 postgres=# -- Create a slot named 'regression_slot' using the output plugin 'test_decoding'
 postgres=# SELECT * FROM pg_create_logical_replication_slot('regression_slot', 'test_decoding', false, true);
     slot_name    |    lsn
------------------+-----------
+-----------------+------------
- regression_slot | 0/16B1970
+ regression_slot | 0/016B1970
 (1 row)
 
 postgres=# SELECT slot_name, plugin, slot_type, database, active, restart_lsn, confirmed_flush_lsn FROM pg_replication_slots;
     slot_name    |    plugin     | slot_type | database | active | restart_lsn | confirmed_flush_lsn
------------------+---------------+-----------+----------+--------+-------------+-----------------
+-----------------+---------------+-----------+----------+--------+-------------+---------------------
- regression_slot | test_decoding | logical   | postgres | f      | 0/16A4408   | 0/16A4440
+ regression_slot | test_decoding | logical   | postgres | f      | 0/016A4408  | 0/016A4440
 (1 row)
 
 postgres=# -- There are no changes to see yet
@@ -79,9 +79,9 @@ CREATE TABLE
 postgres=# -- DDL isn't replicated, so all you'll see is the transaction
 postgres=# SELECT * FROM pg_logical_slot_get_changes('regression_slot', NULL, NULL);
     lsn     |  xid  |     data
------------+-------+--------------
+------------+-------+--------------
- 0/BA2DA58 | 10297 | BEGIN 10297
+ 0/0BA2DA58 | 10297 | BEGIN 10297
- 0/BA5A5A0 | 10297 | COMMIT 10297
+ 0/0BA5A5A0 | 10297 | COMMIT 10297
 (2 rows)
 
 postgres=# -- Once changes are read, they're consumed and not emitted
@@ -98,11 +98,11 @@ postgres=*# COMMIT;
 
 postgres=# SELECT * FROM pg_logical_slot_get_changes('regression_slot', NULL, NULL);
     lsn     |  xid  |                          data
------------+-------+---------------------------------------------------------
+------------+-------+---------------------------------------------------------
- 0/BA5A688 | 10298 | BEGIN 10298
+ 0/0BA5A688 | 10298 | BEGIN 10298
- 0/BA5A6F0 | 10298 | table public.data: INSERT: id[integer]:1 data[text]:'1'
+ 0/0BA5A6F0 | 10298 | table public.data: INSERT: id[integer]:1 data[text]:'1'
- 0/BA5A7F8 | 10298 | table public.data: INSERT: id[integer]:2 data[text]:'2'
+ 0/0BA5A7F8 | 10298 | table public.data: INSERT: id[integer]:2 data[text]:'2'
- 0/BA5A8A8 | 10298 | COMMIT 10298
+ 0/0BA5A8A8 | 10298 | COMMIT 10298
 (4 rows)
 
 postgres=# INSERT INTO data(data) VALUES('3');
@@ -110,28 +110,28 @@ postgres=# INSERT INTO data(data) VALUES('3');
 postgres=# -- You can also peek ahead in the change stream without consuming changes
 postgres=# SELECT * FROM pg_logical_slot_peek_changes('regression_slot', NULL, NULL);
     lsn     |  xid  |                          data
------------+-------+---------------------------------------------------------
+------------+-------+---------------------------------------------------------
- 0/BA5A8E0 | 10299 | BEGIN 10299
+ 0/0BA5A8E0 | 10299 | BEGIN 10299
- 0/BA5A8E0 | 10299 | table public.data: INSERT: id[integer]:3 data[text]:'3'
+ 0/0BA5A8E0 | 10299 | table public.data: INSERT: id[integer]:3 data[text]:'3'
- 0/BA5A990 | 10299 | COMMIT 10299
+ 0/0BA5A990 | 10299 | COMMIT 10299
 (3 rows)
 
 postgres=# -- The next call to pg_logical_slot_peek_changes() returns the same changes again
 postgres=# SELECT * FROM pg_logical_slot_peek_changes('regression_slot', NULL, NULL);
     lsn     |  xid  |                          data
------------+-------+---------------------------------------------------------
+------------+-------+---------------------------------------------------------
- 0/BA5A8E0 | 10299 | BEGIN 10299
+ 0/0BA5A8E0 | 10299 | BEGIN 10299
- 0/BA5A8E0 | 10299 | table public.data: INSERT: id[integer]:3 data[text]:'3'
+ 0/0BA5A8E0 | 10299 | table public.data: INSERT: id[integer]:3 data[text]:'3'
- 0/BA5A990 | 10299 | COMMIT 10299
+ 0/0BA5A990 | 10299 | COMMIT 10299
 (3 rows)
 
 postgres=# -- options can be passed to output plugin, to influence the formatting
 postgres=# SELECT * FROM pg_logical_slot_peek_changes('regression_slot', NULL, NULL, 'include-timestamp', 'on');
     lsn     |  xid  |                          data
------------+-------+---------------------------------------------------------
+------------+-------+---------------------------------------------------------
- 0/BA5A8E0 | 10299 | BEGIN 10299
+ 0/0BA5A8E0 | 10299 | BEGIN 10299
- 0/BA5A8E0 | 10299 | table public.data: INSERT: id[integer]:3 data[text]:'3'
+ 0/0BA5A8E0 | 10299 | table public.data: INSERT: id[integer]:3 data[text]:'3'
- 0/BA5A990 | 10299 | COMMIT 10299 (at 2017-05-10 12:07:21.272494-04)
+ 0/0BA5A990 | 10299 | COMMIT 10299 (at 2017-05-10 12:07:21.272494-04)
 (3 rows)
 
 postgres=# -- Remember to destroy a slot you no longer need to stop it consuming
@@ -201,17 +201,17 @@ postgres=*# PREPARE TRANSACTION 'test_prepared1';
 
 postgres=# SELECT * FROM pg_logical_slot_get_changes('regression_slot', NULL, NULL);
     lsn     | xid |                          data
------------+-----+---------------------------------------------------------
+------------+-----+---------------------------------------------------------
- 0/1689DC0 | 529 | BEGIN 529
+ 0/01689DC0 | 529 | BEGIN 529
- 0/1689DC0 | 529 | table public.data: INSERT: id[integer]:3 data[text]:'5'
+ 0/01689DC0 | 529 | table public.data: INSERT: id[integer]:3 data[text]:'5'
- 0/1689FC0 | 529 | PREPARE TRANSACTION 'test_prepared1', txid 529
+ 0/01689FC0 | 529 | PREPARE TRANSACTION 'test_prepared1', txid 529
 (3 rows)
 
 postgres=# COMMIT PREPARED 'test_prepared1';
 postgres=# select * from pg_logical_slot_get_changes('regression_slot', NULL, NULL);
     lsn     | xid |                    data
------------+-----+--------------------------------------------
+------------+-----+--------------------------------------------
- 0/168A060 | 529 | COMMIT PREPARED 'test_prepared1', txid 529
+ 0/0168A060 | 529 | COMMIT PREPARED 'test_prepared1', txid 529
 (4 row)
 
 postgres=#-- you can also rollback a prepared transaction
@@ -220,17 +220,17 @@ postgres=*# INSERT INTO data(data) VALUES('6');
 postgres=*# PREPARE TRANSACTION 'test_prepared2';
 postgres=# select * from pg_logical_slot_get_changes('regression_slot', NULL, NULL);
     lsn     | xid |                          data
------------+-----+---------------------------------------------------------
+------------+-----+---------------------------------------------------------
- 0/168A180 | 530 | BEGIN 530
+ 0/0168A180 | 530 | BEGIN 530
- 0/168A1E8 | 530 | table public.data: INSERT: id[integer]:4 data[text]:'6'
+ 0/0168A1E8 | 530 | table public.data: INSERT: id[integer]:4 data[text]:'6'
- 0/168A430 | 530 | PREPARE TRANSACTION 'test_prepared2', txid 530
+ 0/0168A430 | 530 | PREPARE TRANSACTION 'test_prepared2', txid 530
 (3 rows)
 
 postgres=# ROLLBACK PREPARED 'test_prepared2';
 postgres=# select * from pg_logical_slot_get_changes('regression_slot', NULL, NULL);
     lsn     | xid |                     data
------------+-----+----------------------------------------------
+------------+-----+----------------------------------------------
- 0/168A4B8 | 530 | ROLLBACK PREPARED 'test_prepared2', txid 530
+ 0/0168A4B8 | 530 | ROLLBACK PREPARED 'test_prepared2', txid 530
 (1 row)
 </programlisting>
 </sect1>
@@ -431,7 +431,7 @@ postgres=# select * from pg_logical_slot_get_changes('regression_slot', NULL, NU
      cases, the following log message may appear:
 <programlisting>
      LOG:  could not synchronize replication slot "failover_slot"
-     DETAIL:  Synchronization could lead to data loss as the remote slot needs WAL at LSN 0/3003F28 and catalog xmin 754, but the standby has LSN 0/3003F28 and catalog xmin 756
+     DETAIL:  Synchronization could lead to data loss as the remote slot needs WAL at LSN 0/03003F28 and catalog xmin 754, but the standby has LSN 0/03003F28 and catalog xmin 756
 </programlisting>
      If the logical replication slot is actively used by a consumer, no
      manual intervention is needed; the slot will advance automatically,

doc/src/sgml/pageinspect.sgml

@@ -74,8 +74,8 @@
 <screen>
 test=# SELECT * FROM page_header(get_raw_page('pg_class', 0));
     lsn     | checksum | flags  | lower | upper | special | pagesize | version | prune_xid
------------+----------+--------+-------+-------+---------+----------+---------+-----------
+------------+----------+--------+-------+-------+---------+----------+---------+-----------
- 0/24A1B50 |        0 |      1 |   232 |   368 |    8192 |     8192 |       4 |         0
+ 0/024A1B50 |        0 |      1 |   232 |   368 |    8192 |     8192 |       4 |         0
 </screen>
       The returned columns correspond to the fields in the
       <structname>PageHeaderData</structname> struct.
@@ -741,9 +741,9 @@ test=# SELECT first_tid, nbytes, tids[0:5] AS some_tids
       For example:
 <screen>
 test=# SELECT * FROM gist_page_opaque_info(get_raw_page('test_gist_idx', 2));
- lsn | nsn | rightlink | flags
+    lsn     │    nsn     │ rightlink │ flags  
------+-----+-----------+--------
+────────────┼────────────┼───────────┼────────
- 0/1 | 0/0 |         1 | {leaf}
+ 0/0B5FE088 │ 0/00000000 │         1 │ {leaf}
 (1 row)
 </screen>
      </para>

doc/src/sgml/pglogicalinspect.sgml

@@ -95,7 +95,7 @@ two_phase_at             | 0/40796AF8
 initial_xmin_horizon     | 0
 building_full_snapshot   | f
 in_slot_creation         | f
-last_serialized_snapshot | 0/0
+last_serialized_snapshot | 0/00000000
 next_phase_at            | 0
 committed_count          | 0
 committed_xip            |
@@ -114,7 +114,7 @@ two_phase_at             | 0/40796AF8
 initial_xmin_horizon     | 0
 building_full_snapshot   | f
 in_slot_creation         | f
-last_serialized_snapshot | 0/0
+last_serialized_snapshot | 0/00000000
 next_phase_at            | 0
 committed_count          | 0
 committed_xip            |

doc/src/sgml/pgwalinspect.sgml

@@ -73,9 +73,9 @@
 <screen>
 postgres=# SELECT * FROM pg_get_wal_record_info('0/E419E28');
 -[ RECORD 1 ]----+-------------------------------------------------
-start_lsn        | 0/E419E28
+start_lsn        | 0/0E419E28
-end_lsn          | 0/E419E68
+end_lsn          | 0/0E419E68
-prev_lsn         | 0/E419D78
+prev_lsn         | 0/0E419D78
 xid              | 0
 resource_manager | Heap2
 record_type      | VACUUM
@@ -146,9 +146,9 @@ block_ref        |
 <screen>
 postgres=# SELECT * FROM pg_get_wal_block_info('0/1230278', '0/12302B8');
 -[ RECORD 1 ]-----+-----------------------------------
-start_lsn         | 0/1230278
+start_lsn         | 0/01230278
-end_lsn           | 0/12302B8
+end_lsn           | 0/012302B8
-prev_lsn          | 0/122FD40
+prev_lsn          | 0/0122FD40
 block_id          | 0
 reltablespace     | 1663
 reldatabase       | 1

doc/src/sgml/test-decoding.sgml

@@ -26,15 +26,15 @@
 <programlisting>
 postgres=# SELECT * FROM pg_logical_slot_get_changes('test_slot', NULL, NULL, 'include-xids', '0');
     lsn     | xid |                       data
------------+-----+--------------------------------------------------
+------------+-----+--------------------------------------------------
- 0/16D30F8 | 691 | BEGIN
+ 0/016D30F8 | 691 | BEGIN
- 0/16D32A0 | 691 | table public.data: INSERT: id[int4]:2 data[text]:'arg'
+ 0/016D32A0 | 691 | table public.data: INSERT: id[int4]:2 data[text]:'arg'
- 0/16D32A0 | 691 | table public.data: INSERT: id[int4]:3 data[text]:'demo'
+ 0/016D32A0 | 691 | table public.data: INSERT: id[int4]:3 data[text]:'demo'
- 0/16D32A0 | 691 | COMMIT
+ 0/016D32A0 | 691 | COMMIT
- 0/16D32D8 | 692 | BEGIN
+ 0/016D32D8 | 692 | BEGIN
- 0/16D3398 | 692 | table public.data: DELETE: id[int4]:2
+ 0/016D3398 | 692 | table public.data: DELETE: id[int4]:2
- 0/16D3398 | 692 | table public.data: DELETE: id[int4]:3
+ 0/016D3398 | 692 | table public.data: DELETE: id[int4]:3
- 0/16D3398 | 692 | COMMIT
+ 0/016D3398 | 692 | COMMIT
 (8 rows)
 </programlisting>
  </para>
@@ -46,17 +46,17 @@ postgres=# SELECT * FROM pg_logical_slot_get_changes('test_slot', NULL, NULL, 'i
 <programlisting>
 postgres[33712]=#* SELECT * FROM pg_logical_slot_get_changes('test_slot', NULL, NULL, 'stream-changes', '1');
     lsn     | xid |                       data
------------+-----+--------------------------------------------------
+------------+-----+--------------------------------------------------
- 0/16B21F8 | 503 | opening a streamed block for transaction TXN 503
+ 0/016B21F8 | 503 | opening a streamed block for transaction TXN 503
- 0/16B21F8 | 503 | streaming change for TXN 503
+ 0/016B21F8 | 503 | streaming change for TXN 503
- 0/16B2300 | 503 | streaming change for TXN 503
+ 0/016B2300 | 503 | streaming change for TXN 503
- 0/16B2408 | 503 | streaming change for TXN 503
+ 0/016B2408 | 503 | streaming change for TXN 503
- 0/16BEBA0 | 503 | closing a streamed block for transaction TXN 503
+ 0/016BEBA0 | 503 | closing a streamed block for transaction TXN 503
- 0/16B21F8 | 503 | opening a streamed block for transaction TXN 503
+ 0/016B21F8 | 503 | opening a streamed block for transaction TXN 503
- 0/16BECA8 | 503 | streaming change for TXN 503
+ 0/016BECA8 | 503 | streaming change for TXN 503
- 0/16BEDB0 | 503 | streaming change for TXN 503
+ 0/016BEDB0 | 503 | streaming change for TXN 503
- 0/16BEEB8 | 503 | streaming change for TXN 503
+ 0/016BEEB8 | 503 | streaming change for TXN 503
- 0/16BEBA0 | 503 | closing a streamed block for transaction TXN 503
+ 0/016BEBA0 | 503 | closing a streamed block for transaction TXN 503
 (10 rows)
 </programlisting>
  </para>

src/backend/access/rmgrdesc/replorigindesc.c

@@ -29,7 +29,7 @@ replorigin_desc(StringInfo buf, XLogReaderState *record)
 
 				xlrec = (xl_replorigin_set *) rec;
 
-				appendStringInfo(buf, "set %u; lsn %X/%X; force: %d",
+				appendStringInfo(buf, "set %u; lsn %X/%08X; force: %d",
 								 xlrec->node_id,
 								 LSN_FORMAT_ARGS(xlrec->remote_lsn),
 								 xlrec->force);

src/backend/access/rmgrdesc/xactdesc.c

@@ -359,7 +359,7 @@ xact_desc_commit(StringInfo buf, uint8 info, xl_xact_commit *xlrec, RepOriginId
 
 	if (parsed.xinfo & XACT_XINFO_HAS_ORIGIN)
 	{
-		appendStringInfo(buf, "; origin: node %u, lsn %X/%X, at %s",
+		appendStringInfo(buf, "; origin: node %u, lsn %X/%08X, at %s",
 						 origin_id,
 						 LSN_FORMAT_ARGS(parsed.origin_lsn),
 						 timestamptz_to_str(parsed.origin_timestamp));
@@ -384,7 +384,7 @@ xact_desc_abort(StringInfo buf, uint8 info, xl_xact_abort *xlrec, RepOriginId or
 
 	if (parsed.xinfo & XACT_XINFO_HAS_ORIGIN)
 	{
-		appendStringInfo(buf, "; origin: node %u, lsn %X/%X, at %s",
+		appendStringInfo(buf, "; origin: node %u, lsn %X/%08X, at %s",
 						 origin_id,
 						 LSN_FORMAT_ARGS(parsed.origin_lsn),
 						 timestamptz_to_str(parsed.origin_timestamp));
@@ -418,7 +418,7 @@ xact_desc_prepare(StringInfo buf, uint8 info, xl_xact_prepare *xlrec, RepOriginI
 	 * way as PrepareRedoAdd().
 	 */
 	if (origin_id != InvalidRepOriginId)
-		appendStringInfo(buf, "; origin: node %u, lsn %X/%X, at %s",
+		appendStringInfo(buf, "; origin: node %u, lsn %X/%08X, at %s",
 						 origin_id,
 						 LSN_FORMAT_ARGS(parsed.origin_lsn),
 						 timestamptz_to_str(parsed.origin_timestamp));

src/backend/access/rmgrdesc/xlogdesc.c

@@ -65,7 +65,7 @@ xlog_desc(StringInfo buf, XLogReaderState *record)
 	{
 		CheckPoint *checkpoint = (CheckPoint *) rec;
 
-		appendStringInfo(buf, "redo %X/%X; "
+		appendStringInfo(buf, "redo %X/%08X; "
 						 "tli %u; prev tli %u; fpw %s; wal_level %s; xid %u:%u; oid %u; multi %u; offset %u; "
 						 "oldest xid %u in DB %u; oldest multi %u in DB %u; "
 						 "oldest/newest commit timestamp xid: %u/%u; "
@@ -111,7 +111,7 @@ xlog_desc(StringInfo buf, XLogReaderState *record)
 		XLogRecPtr	startpoint;
 
 		memcpy(&startpoint, rec, sizeof(XLogRecPtr));
-		appendStringInfo(buf, "%X/%X", LSN_FORMAT_ARGS(startpoint));
+		appendStringInfo(buf, "%X/%08X", LSN_FORMAT_ARGS(startpoint));
 	}
 	else if (info == XLOG_PARAMETER_CHANGE)
 	{
@@ -156,7 +156,7 @@ xlog_desc(StringInfo buf, XLogReaderState *record)
 		xl_overwrite_contrecord xlrec;
 
 		memcpy(&xlrec, rec, sizeof(xl_overwrite_contrecord));
-		appendStringInfo(buf, "lsn %X/%X; time %s",
+		appendStringInfo(buf, "lsn %X/%08X; time %s",
 						 LSN_FORMAT_ARGS(xlrec.overwritten_lsn),
 						 timestamptz_to_str(xlrec.overwrite_time));
 	}

src/backend/access/transam/timeline.c

@@ -154,7 +154,7 @@ readTimeLineHistory(TimeLineID targetTLI)
 		if (*ptr == '\0' || *ptr == '#')
 			continue;
 
-		nfields = sscanf(fline, "%u\t%X/%X", &tli, &switchpoint_hi, &switchpoint_lo);
+		nfields = sscanf(fline, "%u\t%X/%08X", &tli, &switchpoint_hi, &switchpoint_lo);
 
 		if (nfields < 1)
 		{
@@ -399,7 +399,7 @@ writeTimeLineHistory(TimeLineID newTLI, TimeLineID parentTLI,
 	 * parent file failed to end with one.
 	 */
 	snprintf(buffer, sizeof(buffer),
-			 "%s%u\t%X/%X\t%s\n",
+			 "%s%u\t%X/%08X\t%s\n",
 			 (srcfd < 0) ? "" : "\n",
 			 parentTLI,
 			 LSN_FORMAT_ARGS(switchpoint),

src/backend/access/transam/twophase.c

@@ -1429,12 +1429,12 @@ XlogReadTwoPhaseData(XLogRecPtr lsn, char **buf, int *len)
 		if (errormsg)
 			ereport(ERROR,
 					(errcode_for_file_access(),
-					 errmsg("could not read two-phase state from WAL at %X/%X: %s",
+					 errmsg("could not read two-phase state from WAL at %X/%08X: %s",
 							LSN_FORMAT_ARGS(lsn), errormsg)));
 		else
 			ereport(ERROR,
 					(errcode_for_file_access(),
-					 errmsg("could not read two-phase state from WAL at %X/%X",
+					 errmsg("could not read two-phase state from WAL at %X/%08X",
 							LSN_FORMAT_ARGS(lsn))));
 	}
 
@@ -1442,7 +1442,7 @@ XlogReadTwoPhaseData(XLogRecPtr lsn, char **buf, int *len)
 		(XLogRecGetInfo(xlogreader) & XLOG_XACT_OPMASK) != XLOG_XACT_PREPARE)
 		ereport(ERROR,
 				(errcode_for_file_access(),
-				 errmsg("expected two-phase state data is not present in WAL at %X/%X",
+				 errmsg("expected two-phase state data is not present in WAL at %X/%08X",
 						LSN_FORMAT_ARGS(lsn))));
 
 	if (len != NULL)
@@ -2533,7 +2533,7 @@ PrepareRedoAdd(FullTransactionId fxid, char *buf,
 			ereport(reachedConsistency ? ERROR : WARNING,
 					(errmsg("could not recover two-phase state file for transaction %u",
 							hdr->xid),
-					 errdetail("Two-phase state file has been found in WAL record %X/%X, but this transaction has already been restored from disk.",
+					 errdetail("Two-phase state file has been found in WAL record %X/%08X, but this transaction has already been restored from disk.",
 							   LSN_FORMAT_ARGS(start_lsn))));
 			return;
 		}

src/backend/access/transam/xlog.c

@@ -1028,7 +1028,7 @@ XLogInsertRecord(XLogRecData *rdata,
 		oldCxt = MemoryContextSwitchTo(walDebugCxt);
 
 		initStringInfo(&buf);
-		appendStringInfo(&buf, "INSERT @ %X/%X: ", LSN_FORMAT_ARGS(EndPos));
+		appendStringInfo(&buf, "INSERT @ %X/%08X: ", LSN_FORMAT_ARGS(EndPos));
 
 		/*
 		 * We have to piece together the WAL record data from the XLogRecData
@@ -1549,8 +1549,8 @@ WaitXLogInsertionsToFinish(XLogRecPtr upto)
 	if (upto > reservedUpto)
 	{
 		ereport(LOG,
-				(errmsg("request to flush past end of generated WAL; request %X/%X, current position %X/%X",
+				errmsg("request to flush past end of generated WAL; request %X/%08X, current position %X/%08X",
-						LSN_FORMAT_ARGS(upto), LSN_FORMAT_ARGS(reservedUpto))));
+					   LSN_FORMAT_ARGS(upto), LSN_FORMAT_ARGS(reservedUpto)));
 		upto = reservedUpto;
 	}
 
@@ -1716,7 +1716,7 @@ GetXLogBuffer(XLogRecPtr ptr, TimeLineID tli)
 		endptr = pg_atomic_read_u64(&XLogCtl->xlblocks[idx]);
 
 		if (expectedEndPtr != endptr)
-			elog(PANIC, "could not find WAL buffer for %X/%X",
+			elog(PANIC, "could not find WAL buffer for %X/%08X",
 				 LSN_FORMAT_ARGS(ptr));
 	}
 	else
@@ -1776,7 +1776,7 @@ WALReadFromBuffers(char *dstbuf, XLogRecPtr startptr, Size count,
 	inserted = pg_atomic_read_u64(&XLogCtl->logInsertResult);
 	if (startptr + count > inserted)
 		ereport(ERROR,
-				errmsg("cannot read past end of generated WAL: requested %X/%X, current position %X/%X",
+				errmsg("cannot read past end of generated WAL: requested %X/%08X, current position %X/%08X",
 					   LSN_FORMAT_ARGS(startptr + count),
 					   LSN_FORMAT_ARGS(inserted)));
 
@@ -2281,7 +2281,7 @@ AdvanceXLInsertBuffer(XLogRecPtr upto, TimeLineID tli, bool opportunistic)
 #ifdef WAL_DEBUG
 	if (XLOG_DEBUG && npages > 0)
 	{
-		elog(DEBUG1, "initialized %d pages, up to %X/%X",
+		elog(DEBUG1, "initialized %d pages, up to %X/%08X",
 			 npages, LSN_FORMAT_ARGS(NewPageEndPtr));
 	}
 #endif
@@ -2492,7 +2492,7 @@ XLogWrite(XLogwrtRqst WriteRqst, TimeLineID tli, bool flexible)
 		XLogRecPtr	EndPtr = pg_atomic_read_u64(&XLogCtl->xlblocks[curridx]);
 
 		if (LogwrtResult.Write >= EndPtr)
-			elog(PANIC, "xlog write request %X/%X is past end of log %X/%X",
+			elog(PANIC, "xlog write request %X/%08X is past end of log %X/%08X",
 				 LSN_FORMAT_ARGS(LogwrtResult.Write),
 				 LSN_FORMAT_ARGS(EndPtr));
 
@@ -2892,7 +2892,7 @@ UpdateMinRecoveryPoint(XLogRecPtr lsn, bool force)
 		newMinRecoveryPoint = GetCurrentReplayRecPtr(&newMinRecoveryPointTLI);
 		if (!force && newMinRecoveryPoint < lsn)
 			elog(WARNING,
-				 "xlog min recovery request %X/%X is past current point %X/%X",
+				 "xlog min recovery request %X/%08X is past current point %X/%08X",
 				 LSN_FORMAT_ARGS(lsn), LSN_FORMAT_ARGS(newMinRecoveryPoint));
 
 		/* update control file */
@@ -2905,9 +2905,9 @@ UpdateMinRecoveryPoint(XLogRecPtr lsn, bool force)
 			LocalMinRecoveryPointTLI = newMinRecoveryPointTLI;
 
 			ereport(DEBUG2,
-					(errmsg_internal("updated min recovery point to %X/%X on timeline %u",
+					errmsg_internal("updated min recovery point to %X/%08X on timeline %u",
 									LSN_FORMAT_ARGS(newMinRecoveryPoint),
-									 newMinRecoveryPointTLI)));
+									newMinRecoveryPointTLI));
 		}
 	}
 	LWLockRelease(ControlFileLock);
@@ -2945,7 +2945,7 @@ XLogFlush(XLogRecPtr record)
 
 #ifdef WAL_DEBUG
 	if (XLOG_DEBUG)
-		elog(LOG, "xlog flush request %X/%X; write %X/%X; flush %X/%X",
+		elog(LOG, "xlog flush request %X/%08X; write %X/%08X; flush %X/%08X",
 			 LSN_FORMAT_ARGS(record),
 			 LSN_FORMAT_ARGS(LogwrtResult.Write),
 			 LSN_FORMAT_ARGS(LogwrtResult.Flush));
@@ -3078,7 +3078,7 @@ XLogFlush(XLogRecPtr record)
 	 */
 	if (LogwrtResult.Flush < record)
 		elog(ERROR,
-			 "xlog flush request %X/%X is not satisfied --- flushed only to %X/%X",
+			 "xlog flush request %X/%08X is not satisfied --- flushed only to %X/%08X",
 			 LSN_FORMAT_ARGS(record),
 			 LSN_FORMAT_ARGS(LogwrtResult.Flush));
 }
@@ -3205,7 +3205,7 @@ XLogBackgroundFlush(void)
 
 #ifdef WAL_DEBUG
 	if (XLOG_DEBUG)
-		elog(LOG, "xlog bg flush request write %X/%X; flush: %X/%X, current is write %X/%X; flush %X/%X",
+		elog(LOG, "xlog bg flush request write %X/%08X; flush: %X/%08X, current is write %X/%08X; flush %X/%08X",
 			 LSN_FORMAT_ARGS(WriteRqst.Write),
 			 LSN_FORMAT_ARGS(WriteRqst.Flush),
 			 LSN_FORMAT_ARGS(LogwrtResult.Write),
@@ -6921,7 +6921,7 @@ LogCheckpointEnd(bool restartpoint)
 						"%d removed, %d recycled; write=%ld.%03d s, "
 						"sync=%ld.%03d s, total=%ld.%03d s; sync files=%d, "
 						"longest=%ld.%03d s, average=%ld.%03d s; distance=%d kB, "
-						"estimate=%d kB; lsn=%X/%X, redo lsn=%X/%X",
+						"estimate=%d kB; lsn=%X/%08X, redo lsn=%X/%08X",
 						CheckpointStats.ckpt_bufs_written,
 						(double) CheckpointStats.ckpt_bufs_written * 100 / NBuffers,
 						CheckpointStats.ckpt_slru_written,
@@ -6945,7 +6945,7 @@ LogCheckpointEnd(bool restartpoint)
 						"%d removed, %d recycled; write=%ld.%03d s, "
 						"sync=%ld.%03d s, total=%ld.%03d s; sync files=%d, "
 						"longest=%ld.%03d s, average=%ld.%03d s; distance=%d kB, "
-						"estimate=%d kB; lsn=%X/%X, redo lsn=%X/%X",
+						"estimate=%d kB; lsn=%X/%08X, redo lsn=%X/%08X",
 						CheckpointStats.ckpt_bufs_written,
 						(double) CheckpointStats.ckpt_bufs_written * 100 / NBuffers,
 						CheckpointStats.ckpt_slru_written,
@@ -7641,7 +7641,7 @@ CreateOverwriteContrecordRecord(XLogRecPtr aborted_lsn, XLogRecPtr pagePtr,
 	if (!RecoveryInProgress())
 		elog(ERROR, "can only be used at end of recovery");
 	if (pagePtr % XLOG_BLCKSZ != 0)
-		elog(ERROR, "invalid position for missing continuation record %X/%X",
+		elog(ERROR, "invalid position for missing continuation record %X/%08X",
 			 LSN_FORMAT_ARGS(pagePtr));
 
 	/* The current WAL insert position should be right after the page header */
@@ -7652,7 +7652,7 @@ CreateOverwriteContrecordRecord(XLogRecPtr aborted_lsn, XLogRecPtr pagePtr,
 		startPos += SizeOfXLogShortPHD;
 	recptr = GetXLogInsertRecPtr();
 	if (recptr != startPos)
-		elog(ERROR, "invalid WAL insert position %X/%X for OVERWRITE_CONTRECORD",
+		elog(ERROR, "invalid WAL insert position %X/%08X for OVERWRITE_CONTRECORD",
 			 LSN_FORMAT_ARGS(recptr));
 
 	START_CRIT_SECTION();
@@ -7682,7 +7682,7 @@ CreateOverwriteContrecordRecord(XLogRecPtr aborted_lsn, XLogRecPtr pagePtr,
 
 	/* check that the record was inserted to the right place */
 	if (ProcLastRecPtr != startPos)
-		elog(ERROR, "OVERWRITE_CONTRECORD was inserted to unexpected position %X/%X",
+		elog(ERROR, "OVERWRITE_CONTRECORD was inserted to unexpected position %X/%08X",
 			 LSN_FORMAT_ARGS(ProcLastRecPtr));
 
 	XLogFlush(recptr);
@@ -7751,8 +7751,7 @@ RecoveryRestartPoint(const CheckPoint *checkPoint, XLogReaderState *record)
 	if (XLogHaveInvalidPages())
 	{
 		elog(DEBUG2,
-			 "could not record restart point at %X/%X because there "
+			 "could not record restart point at %X/%08X because there are unresolved references to invalid pages",
-			 "are unresolved references to invalid pages",
 			 LSN_FORMAT_ARGS(checkPoint->redo));
 		return;
 	}
@@ -7832,8 +7831,8 @@ CreateRestartPoint(int flags)
 		lastCheckPoint.redo <= ControlFile->checkPointCopy.redo)
 	{
 		ereport(DEBUG2,
-				(errmsg_internal("skipping restartpoint, already performed at %X/%X",
+				errmsg_internal("skipping restartpoint, already performed at %X/%08X",
-								 LSN_FORMAT_ARGS(lastCheckPoint.redo))));
+								LSN_FORMAT_ARGS(lastCheckPoint.redo)));
 
 		UpdateMinRecoveryPoint(InvalidXLogRecPtr, true);
 		if (flags & CHECKPOINT_IS_SHUTDOWN)
@@ -8017,10 +8016,10 @@ CreateRestartPoint(int flags)
 
 	xtime = GetLatestXTime();
 	ereport((log_checkpoints ? LOG : DEBUG2),
-			(errmsg("recovery restart point at %X/%X",
+			errmsg("recovery restart point at %X/%08X",
 				   LSN_FORMAT_ARGS(lastCheckPoint.redo)),
 			xtime ? errdetail("Last completed transaction was at log time %s.",
-							   timestamptz_to_str(xtime)) : 0));
+							  timestamptz_to_str(xtime)) : 0);
 
 	/*
 	 * Finally, execute archive_cleanup_command, if any.
@@ -8281,8 +8280,8 @@ XLogRestorePoint(const char *rpName)
 	RecPtr = XLogInsert(RM_XLOG_ID, XLOG_RESTORE_POINT);
 
 	ereport(LOG,
-			(errmsg("restore point \"%s\" created at %X/%X",
+			errmsg("restore point \"%s\" created at %X/%08X",
-					rpName, LSN_FORMAT_ARGS(RecPtr))));
+				   rpName, LSN_FORMAT_ARGS(RecPtr)));
 
 	return RecPtr;
 }

src/backend/access/transam/xlogbackup.c

@@ -42,7 +42,7 @@ build_backup_content(BackupState *state, bool ishistoryfile)
 
 	XLByteToSeg(state->startpoint, startsegno, wal_segment_size);
 	XLogFileName(startxlogfile, state->starttli, startsegno, wal_segment_size);
-	appendStringInfo(result, "START WAL LOCATION: %X/%X (file %s)\n",
+	appendStringInfo(result, "START WAL LOCATION: %X/%08X (file %s)\n",
 					 LSN_FORMAT_ARGS(state->startpoint), startxlogfile);
 
 	if (ishistoryfile)
@@ -52,11 +52,11 @@ build_backup_content(BackupState *state, bool ishistoryfile)
 
 		XLByteToSeg(state->stoppoint, stopsegno, wal_segment_size);
 		XLogFileName(stopxlogfile, state->stoptli, stopsegno, wal_segment_size);
-		appendStringInfo(result, "STOP WAL LOCATION: %X/%X (file %s)\n",
+		appendStringInfo(result, "STOP WAL LOCATION: %X/%08X (file %s)\n",
 						 LSN_FORMAT_ARGS(state->stoppoint), stopxlogfile);
 	}
 
-	appendStringInfo(result, "CHECKPOINT LOCATION: %X/%X\n",
+	appendStringInfo(result, "CHECKPOINT LOCATION: %X/%08X\n",
 					 LSN_FORMAT_ARGS(state->checkpointloc));
 	appendStringInfoString(result, "BACKUP METHOD: streamed\n");
 	appendStringInfo(result, "BACKUP FROM: %s\n",
@@ -81,7 +81,7 @@ build_backup_content(BackupState *state, bool ishistoryfile)
 	Assert(XLogRecPtrIsInvalid(state->istartpoint) == (state->istarttli == 0));
 	if (!XLogRecPtrIsInvalid(state->istartpoint))
 	{
-		appendStringInfo(result, "INCREMENTAL FROM LSN: %X/%X\n",
+		appendStringInfo(result, "INCREMENTAL FROM LSN: %X/%08X\n",
 						 LSN_FORMAT_ARGS(state->istartpoint));
 		appendStringInfo(result, "INCREMENTAL FROM TLI: %u\n",
 						 state->istarttli);

src/backend/access/transam/xlogprefetcher.c

@@ -546,7 +546,7 @@ XLogPrefetcherNextBlock(uintptr_t pgsr_private, XLogRecPtr *lsn)
 
 #ifdef XLOGPREFETCHER_DEBUG_LEVEL
 					elog(XLOGPREFETCHER_DEBUG_LEVEL,
-						 "suppressing all readahead until %X/%X is replayed due to possible TLI change",
+						 "suppressing all readahead until %X/%08X is replayed due to possible TLI change",
 						 LSN_FORMAT_ARGS(record->lsn));
 #endif
 
@@ -579,7 +579,7 @@ XLogPrefetcherNextBlock(uintptr_t pgsr_private, XLogRecPtr *lsn)
 
 #ifdef XLOGPREFETCHER_DEBUG_LEVEL
 					elog(XLOGPREFETCHER_DEBUG_LEVEL,
-						 "suppressing prefetch in database %u until %X/%X is replayed due to raw file copy",
+						 "suppressing prefetch in database %u until %X/%08X is replayed due to raw file copy",
 						 rlocator.dbOid,
 						 LSN_FORMAT_ARGS(record->lsn));
 #endif
@@ -607,7 +607,7 @@ XLogPrefetcherNextBlock(uintptr_t pgsr_private, XLogRecPtr *lsn)
 
 #ifdef XLOGPREFETCHER_DEBUG_LEVEL
 						elog(XLOGPREFETCHER_DEBUG_LEVEL,
-							 "suppressing prefetch in relation %u/%u/%u until %X/%X is replayed, which creates the relation",
+							 "suppressing prefetch in relation %u/%u/%u until %X/%08X is replayed, which creates the relation",
 							 xlrec->rlocator.spcOid,
 							 xlrec->rlocator.dbOid,
 							 xlrec->rlocator.relNumber,
@@ -630,7 +630,7 @@ XLogPrefetcherNextBlock(uintptr_t pgsr_private, XLogRecPtr *lsn)
 
 #ifdef XLOGPREFETCHER_DEBUG_LEVEL
 					elog(XLOGPREFETCHER_DEBUG_LEVEL,
-						 "suppressing prefetch in relation %u/%u/%u from block %u until %X/%X is replayed, which truncates the relation",
+						 "suppressing prefetch in relation %u/%u/%u from block %u until %X/%08X is replayed, which truncates the relation",
 						 xlrec->rlocator.spcOid,
 						 xlrec->rlocator.dbOid,
 						 xlrec->rlocator.relNumber,
@@ -729,7 +729,7 @@ XLogPrefetcherNextBlock(uintptr_t pgsr_private, XLogRecPtr *lsn)
 			{
 #ifdef XLOGPREFETCHER_DEBUG_LEVEL
 				elog(XLOGPREFETCHER_DEBUG_LEVEL,
-					 "suppressing all prefetch in relation %u/%u/%u until %X/%X is replayed, because the relation does not exist on disk",
+					 "suppressing all prefetch in relation %u/%u/%u until %X/%08X is replayed, because the relation does not exist on disk",
 					 reln->smgr_rlocator.locator.spcOid,
 					 reln->smgr_rlocator.locator.dbOid,
 					 reln->smgr_rlocator.locator.relNumber,
@@ -750,7 +750,7 @@ XLogPrefetcherNextBlock(uintptr_t pgsr_private, XLogRecPtr *lsn)
 			{
 #ifdef XLOGPREFETCHER_DEBUG_LEVEL
 				elog(XLOGPREFETCHER_DEBUG_LEVEL,
-					 "suppressing prefetch in relation %u/%u/%u from block %u until %X/%X is replayed, because the relation is too small",
+					 "suppressing prefetch in relation %u/%u/%u from block %u until %X/%08X is replayed, because the relation is too small",
 					 reln->smgr_rlocator.locator.spcOid,
 					 reln->smgr_rlocator.locator.dbOid,
 					 reln->smgr_rlocator.locator.relNumber,
@@ -928,7 +928,7 @@ XLogPrefetcherIsFiltered(XLogPrefetcher *prefetcher, RelFileLocator rlocator,
 		{
 #ifdef XLOGPREFETCHER_DEBUG_LEVEL
 			elog(XLOGPREFETCHER_DEBUG_LEVEL,
-				 "prefetch of %u/%u/%u block %u suppressed; filtering until LSN %X/%X is replayed (blocks >= %u filtered)",
+				 "prefetch of %u/%u/%u block %u suppressed; filtering until LSN %X/%08X is replayed (blocks >= %u filtered)",
 				 rlocator.spcOid, rlocator.dbOid, rlocator.relNumber, blockno,
 				 LSN_FORMAT_ARGS(filter->filter_until_replayed),
 				 filter->filter_from_block);
@@ -944,7 +944,7 @@ XLogPrefetcherIsFiltered(XLogPrefetcher *prefetcher, RelFileLocator rlocator,
 		{
 #ifdef XLOGPREFETCHER_DEBUG_LEVEL
 			elog(XLOGPREFETCHER_DEBUG_LEVEL,
-				 "prefetch of %u/%u/%u block %u suppressed; filtering until LSN %X/%X is replayed (whole database)",
+				 "prefetch of %u/%u/%u block %u suppressed; filtering until LSN %X/%08X is replayed (whole database)",
 				 rlocator.spcOid, rlocator.dbOid, rlocator.relNumber, blockno,
 				 LSN_FORMAT_ARGS(filter->filter_until_replayed));
 #endif

src/backend/access/transam/xlogreader.c

@@ -617,7 +617,7 @@ restart:
 	}
 	else if (targetRecOff < pageHeaderSize)
 	{
-		report_invalid_record(state, "invalid record offset at %X/%X: expected at least %u, got %u",
+		report_invalid_record(state, "invalid record offset at %X/%08X: expected at least %u, got %u",
 							  LSN_FORMAT_ARGS(RecPtr),
 							  pageHeaderSize, targetRecOff);
 		goto err;
@@ -626,7 +626,7 @@ restart:
 	if ((((XLogPageHeader) state->readBuf)->xlp_info & XLP_FIRST_IS_CONTRECORD) &&
 		targetRecOff == pageHeaderSize)
 	{
-		report_invalid_record(state, "contrecord is requested by %X/%X",
+		report_invalid_record(state, "contrecord is requested by %X/%08X",
 							  LSN_FORMAT_ARGS(RecPtr));
 		goto err;
 	}
@@ -667,7 +667,7 @@ restart:
 		if (total_len < SizeOfXLogRecord)
 		{
 			report_invalid_record(state,
-								  "invalid record length at %X/%X: expected at least %u, got %u",
+								  "invalid record length at %X/%08X: expected at least %u, got %u",
 								  LSN_FORMAT_ARGS(RecPtr),
 								  (uint32) SizeOfXLogRecord, total_len);
 			goto err;
@@ -756,7 +756,7 @@ restart:
 			if (!(pageHeader->xlp_info & XLP_FIRST_IS_CONTRECORD))
 			{
 				report_invalid_record(state,
-									  "there is no contrecord flag at %X/%X",
+									  "there is no contrecord flag at %X/%08X",
 									  LSN_FORMAT_ARGS(RecPtr));
 				goto err;
 			}
@@ -769,7 +769,7 @@ restart:
 				total_len != (pageHeader->xlp_rem_len + gotlen))
 			{
 				report_invalid_record(state,
-									  "invalid contrecord length %u (expected %lld) at %X/%X",
+									  "invalid contrecord length %u (expected %lld) at %X/%08X",
 									  pageHeader->xlp_rem_len,
 									  ((long long) total_len) - gotlen,
 									  LSN_FORMAT_ARGS(RecPtr));
@@ -1132,7 +1132,7 @@ ValidXLogRecordHeader(XLogReaderState *state, XLogRecPtr RecPtr,
 	if (record->xl_tot_len < SizeOfXLogRecord)
 	{
 		report_invalid_record(state,
-							  "invalid record length at %X/%X: expected at least %u, got %u",
+							  "invalid record length at %X/%08X: expected at least %u, got %u",
 							  LSN_FORMAT_ARGS(RecPtr),
 							  (uint32) SizeOfXLogRecord, record->xl_tot_len);
 		return false;
@@ -1140,7 +1140,7 @@ ValidXLogRecordHeader(XLogReaderState *state, XLogRecPtr RecPtr,
 	if (!RmgrIdIsValid(record->xl_rmid))
 	{
 		report_invalid_record(state,
-							  "invalid resource manager ID %u at %X/%X",
+							  "invalid resource manager ID %u at %X/%08X",
 							  record->xl_rmid, LSN_FORMAT_ARGS(RecPtr));
 		return false;
 	}
@@ -1153,7 +1153,7 @@ ValidXLogRecordHeader(XLogReaderState *state, XLogRecPtr RecPtr,
 		if (!(record->xl_prev < RecPtr))
 		{
 			report_invalid_record(state,
-								  "record with incorrect prev-link %X/%X at %X/%X",
+								  "record with incorrect prev-link %X/%08X at %X/%08X",
 								  LSN_FORMAT_ARGS(record->xl_prev),
 								  LSN_FORMAT_ARGS(RecPtr));
 			return false;
@@ -1169,7 +1169,7 @@ ValidXLogRecordHeader(XLogReaderState *state, XLogRecPtr RecPtr,
 		if (record->xl_prev != PrevRecPtr)
 		{
 			report_invalid_record(state,
-								  "record with incorrect prev-link %X/%X at %X/%X",
+								  "record with incorrect prev-link %X/%08X at %X/%08X",
 								  LSN_FORMAT_ARGS(record->xl_prev),
 								  LSN_FORMAT_ARGS(RecPtr));
 			return false;
@@ -1207,7 +1207,7 @@ ValidXLogRecord(XLogReaderState *state, XLogRecord *record, XLogRecPtr recptr)
 	if (!EQ_CRC32C(record->xl_crc, crc))
 	{
 		report_invalid_record(state,
-							  "incorrect resource manager data checksum in record at %X/%X",
+							  "incorrect resource manager data checksum in record at %X/%08X",
 							  LSN_FORMAT_ARGS(recptr));
 		return false;
 	}
@@ -1241,7 +1241,7 @@ XLogReaderValidatePageHeader(XLogReaderState *state, XLogRecPtr recptr,
 		XLogFileName(fname, state->seg.ws_tli, segno, state->segcxt.ws_segsize);
 
 		report_invalid_record(state,
-							  "invalid magic number %04X in WAL segment %s, LSN %X/%X, offset %u",
+							  "invalid magic number %04X in WAL segment %s, LSN %X/%08X, offset %u",
 							  hdr->xlp_magic,
 							  fname,
 							  LSN_FORMAT_ARGS(recptr),
@@ -1256,7 +1256,7 @@ XLogReaderValidatePageHeader(XLogReaderState *state, XLogRecPtr recptr,
 		XLogFileName(fname, state->seg.ws_tli, segno, state->segcxt.ws_segsize);
 
 		report_invalid_record(state,
-							  "invalid info bits %04X in WAL segment %s, LSN %X/%X, offset %u",
+							  "invalid info bits %04X in WAL segment %s, LSN %X/%08X, offset %u",
 							  hdr->xlp_info,
 							  fname,
 							  LSN_FORMAT_ARGS(recptr),
@@ -1298,7 +1298,7 @@ XLogReaderValidatePageHeader(XLogReaderState *state, XLogRecPtr recptr,
 
 		/* hmm, first page of file doesn't have a long header? */
 		report_invalid_record(state,
-							  "invalid info bits %04X in WAL segment %s, LSN %X/%X, offset %u",
+							  "invalid info bits %04X in WAL segment %s, LSN %X/%08X, offset %u",
 							  hdr->xlp_info,
 							  fname,
 							  LSN_FORMAT_ARGS(recptr),
@@ -1318,7 +1318,7 @@ XLogReaderValidatePageHeader(XLogReaderState *state, XLogRecPtr recptr,
 		XLogFileName(fname, state->seg.ws_tli, segno, state->segcxt.ws_segsize);
 
 		report_invalid_record(state,
-							  "unexpected pageaddr %X/%X in WAL segment %s, LSN %X/%X, offset %u",
+							  "unexpected pageaddr %X/%08X in WAL segment %s, LSN %X/%08X, offset %u",
 							  LSN_FORMAT_ARGS(hdr->xlp_pageaddr),
 							  fname,
 							  LSN_FORMAT_ARGS(recptr),
@@ -1344,7 +1344,7 @@ XLogReaderValidatePageHeader(XLogReaderState *state, XLogRecPtr recptr,
 			XLogFileName(fname, state->seg.ws_tli, segno, state->segcxt.ws_segsize);
 
 			report_invalid_record(state,
-								  "out-of-sequence timeline ID %u (after %u) in WAL segment %s, LSN %X/%X, offset %u",
+								  "out-of-sequence timeline ID %u (after %u) in WAL segment %s, LSN %X/%08X, offset %u",
 								  hdr->xlp_tli,
 								  state->latestPageTLI,
 								  fname,
@@ -1756,7 +1756,7 @@ DecodeXLogRecord(XLogReaderState *state,
 			if (block_id <= decoded->max_block_id)
 			{
 				report_invalid_record(state,
-									  "out-of-order block_id %u at %X/%X",
+									  "out-of-order block_id %u at %X/%08X",
 									  block_id,
 									  LSN_FORMAT_ARGS(state->ReadRecPtr));
 				goto err;
@@ -1780,14 +1780,14 @@ DecodeXLogRecord(XLogReaderState *state,
 			if (blk->has_data && blk->data_len == 0)
 			{
 				report_invalid_record(state,
-									  "BKPBLOCK_HAS_DATA set, but no data included at %X/%X",
+									  "BKPBLOCK_HAS_DATA set, but no data included at %X/%08X",
 									  LSN_FORMAT_ARGS(state->ReadRecPtr));
 				goto err;
 			}
 			if (!blk->has_data && blk->data_len != 0)
 			{
 				report_invalid_record(state,
-									  "BKPBLOCK_HAS_DATA not set, but data length is %u at %X/%X",
+									  "BKPBLOCK_HAS_DATA not set, but data length is %u at %X/%08X",
 									  (unsigned int) blk->data_len,
 									  LSN_FORMAT_ARGS(state->ReadRecPtr));
 				goto err;
@@ -1823,7 +1823,7 @@ DecodeXLogRecord(XLogReaderState *state,
 					 blk->bimg_len == BLCKSZ))
 				{
 					report_invalid_record(state,
-										  "BKPIMAGE_HAS_HOLE set, but hole offset %u length %u block image length %u at %X/%X",
+										  "BKPIMAGE_HAS_HOLE set, but hole offset %u length %u block image length %u at %X/%08X",
 										  (unsigned int) blk->hole_offset,
 										  (unsigned int) blk->hole_length,
 										  (unsigned int) blk->bimg_len,
@@ -1839,7 +1839,7 @@ DecodeXLogRecord(XLogReaderState *state,
 					(blk->hole_offset != 0 || blk->hole_length != 0))
 				{
 					report_invalid_record(state,
-										  "BKPIMAGE_HAS_HOLE not set, but hole offset %u length %u at %X/%X",
+										  "BKPIMAGE_HAS_HOLE not set, but hole offset %u length %u at %X/%08X",
 										  (unsigned int) blk->hole_offset,
 										  (unsigned int) blk->hole_length,
 										  LSN_FORMAT_ARGS(state->ReadRecPtr));
@@ -1853,7 +1853,7 @@ DecodeXLogRecord(XLogReaderState *state,
 					blk->bimg_len == BLCKSZ)
 				{
 					report_invalid_record(state,
-										  "BKPIMAGE_COMPRESSED set, but block image length %u at %X/%X",
+										  "BKPIMAGE_COMPRESSED set, but block image length %u at %X/%08X",
 										  (unsigned int) blk->bimg_len,
 										  LSN_FORMAT_ARGS(state->ReadRecPtr));
 					goto err;
@@ -1868,7 +1868,7 @@ DecodeXLogRecord(XLogReaderState *state,
 					blk->bimg_len != BLCKSZ)
 				{
 					report_invalid_record(state,
-										  "neither BKPIMAGE_HAS_HOLE nor BKPIMAGE_COMPRESSED set, but block image length is %u at %X/%X",
+										  "neither BKPIMAGE_HAS_HOLE nor BKPIMAGE_COMPRESSED set, but block image length is %u at %X/%08X",
 										  (unsigned int) blk->data_len,
 										  LSN_FORMAT_ARGS(state->ReadRecPtr));
 					goto err;
@@ -1884,7 +1884,7 @@ DecodeXLogRecord(XLogReaderState *state,
 				if (rlocator == NULL)
 				{
 					report_invalid_record(state,
-										  "BKPBLOCK_SAME_REL set but no previous rel at %X/%X",
+										  "BKPBLOCK_SAME_REL set but no previous rel at %X/%08X",
 										  LSN_FORMAT_ARGS(state->ReadRecPtr));
 					goto err;
 				}
@@ -1896,7 +1896,7 @@ DecodeXLogRecord(XLogReaderState *state,
 		else
 		{
 			report_invalid_record(state,
-								  "invalid block_id %u at %X/%X",
+								  "invalid block_id %u at %X/%08X",
 								  block_id, LSN_FORMAT_ARGS(state->ReadRecPtr));
 			goto err;
 		}
@@ -1963,7 +1963,7 @@ DecodeXLogRecord(XLogReaderState *state,
 
 shortdata_err:
 	report_invalid_record(state,
-						  "record with invalid length at %X/%X",
+						  "record with invalid length at %X/%08X",
 						  LSN_FORMAT_ARGS(state->ReadRecPtr));
 err:
 	*errormsg = state->errormsg_buf;
@@ -2073,14 +2073,14 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page)
 		!record->record->blocks[block_id].in_use)
 	{
 		report_invalid_record(record,
-							  "could not restore image at %X/%X with invalid block %d specified",
+							  "could not restore image at %X/%08X with invalid block %d specified",
 							  LSN_FORMAT_ARGS(record->ReadRecPtr),
 							  block_id);
 		return false;
 	}
 	if (!record->record->blocks[block_id].has_image)
 	{
-		report_invalid_record(record, "could not restore image at %X/%X with invalid state, block %d",
+		report_invalid_record(record, "could not restore image at %X/%08X with invalid state, block %d",
 							  LSN_FORMAT_ARGS(record->ReadRecPtr),
 							  block_id);
 		return false;
@@ -2107,7 +2107,7 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page)
 									bkpb->bimg_len, BLCKSZ - bkpb->hole_length) <= 0)
 				decomp_success = false;
 #else
-			report_invalid_record(record, "could not restore image at %X/%X compressed with %s not supported by build, block %d",
+			report_invalid_record(record, "could not restore image at %X/%08X compressed with %s not supported by build, block %d",
 								  LSN_FORMAT_ARGS(record->ReadRecPtr),
 								  "LZ4",
 								  block_id);
@@ -2124,7 +2124,7 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page)
 			if (ZSTD_isError(decomp_result))
 				decomp_success = false;
 #else
-			report_invalid_record(record, "could not restore image at %X/%X compressed with %s not supported by build, block %d",
+			report_invalid_record(record, "could not restore image at %X/%08X compressed with %s not supported by build, block %d",
 								  LSN_FORMAT_ARGS(record->ReadRecPtr),
 								  "zstd",
 								  block_id);
@@ -2133,7 +2133,7 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page)
 		}
 		else
 		{
-			report_invalid_record(record, "could not restore image at %X/%X compressed with unknown method, block %d",
+			report_invalid_record(record, "could not restore image at %X/%08X compressed with unknown method, block %d",
 								  LSN_FORMAT_ARGS(record->ReadRecPtr),
 								  block_id);
 			return false;
@@ -2141,7 +2141,7 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page)
 
 		if (!decomp_success)
 		{
-			report_invalid_record(record, "could not decompress image at %X/%X, block %d",
+			report_invalid_record(record, "could not decompress image at %X/%08X, block %d",
 								  LSN_FORMAT_ARGS(record->ReadRecPtr),
 								  block_id);
 			return false;

src/backend/access/transam/xlogrecovery.c

@@ -620,10 +620,10 @@ InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdown_ptr,
 		 * than ControlFile->checkPoint is used.
 		 */
 		ereport(LOG,
-				(errmsg("starting backup recovery with redo LSN %X/%X, checkpoint LSN %X/%X, on timeline ID %u",
+				errmsg("starting backup recovery with redo LSN %X/%08X, checkpoint LSN %X/%08X, on timeline ID %u",
 					   LSN_FORMAT_ARGS(RedoStartLSN),
 					   LSN_FORMAT_ARGS(CheckPointLoc),
-						CheckPointTLI)));
+					   CheckPointTLI));
 
 		/*
 		 * When a backup_label file is present, we want to roll forward from
@@ -636,8 +636,8 @@ InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdown_ptr,
 			memcpy(&checkPoint, XLogRecGetData(xlogreader), sizeof(CheckPoint));
 			wasShutdown = ((record->xl_info & ~XLR_INFO_MASK) == XLOG_CHECKPOINT_SHUTDOWN);
 			ereport(DEBUG1,
-					(errmsg_internal("checkpoint record is at %X/%X",
+					errmsg_internal("checkpoint record is at %X/%08X",
-									 LSN_FORMAT_ARGS(CheckPointLoc))));
+									LSN_FORMAT_ARGS(CheckPointLoc)));
 			InRecovery = true;	/* force recovery even if SHUTDOWNED */
 
 			/*
@@ -652,23 +652,23 @@ InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdown_ptr,
 				if (!ReadRecord(xlogprefetcher, LOG, false,
 								checkPoint.ThisTimeLineID))
 					ereport(FATAL,
-							(errmsg("could not find redo location %X/%X referenced by checkpoint record at %X/%X",
+							errmsg("could not find redo location %X/%08X referenced by checkpoint record at %X/%08X",
 								   LSN_FORMAT_ARGS(checkPoint.redo), LSN_FORMAT_ARGS(CheckPointLoc)),
 							errhint("If you are restoring from a backup, touch \"%s/recovery.signal\" or \"%s/standby.signal\" and add required recovery options.\n"
 									"If you are not restoring from a backup, try removing the file \"%s/backup_label\".\n"
 									"Be careful: removing \"%s/backup_label\" will result in a corrupt cluster if restoring from a backup.",
-									 DataDir, DataDir, DataDir, DataDir)));
+									DataDir, DataDir, DataDir, DataDir));
 			}
 		}
 		else
 		{
 			ereport(FATAL,
-					(errmsg("could not locate required checkpoint record at %X/%X",
+					errmsg("could not locate required checkpoint record at %X/%08X",
 						   LSN_FORMAT_ARGS(CheckPointLoc)),
 					errhint("If you are restoring from a backup, touch \"%s/recovery.signal\" or \"%s/standby.signal\" and add required recovery options.\n"
 							"If you are not restoring from a backup, try removing the file \"%s/backup_label\".\n"
 							"Be careful: removing \"%s/backup_label\" will result in a corrupt cluster if restoring from a backup.",
-							 DataDir, DataDir, DataDir, DataDir)));
+							DataDir, DataDir, DataDir, DataDir));
 			wasShutdown = false;	/* keep compiler quiet */
 		}
 
@@ -773,8 +773,8 @@ InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdown_ptr,
 		 */
 		if (!XLogRecPtrIsInvalid(ControlFile->backupStartPoint))
 			ereport(LOG,
-					(errmsg("restarting backup recovery with redo LSN %X/%X",
+					errmsg("restarting backup recovery with redo LSN %X/%08X",
-							LSN_FORMAT_ARGS(ControlFile->backupStartPoint))));
+						   LSN_FORMAT_ARGS(ControlFile->backupStartPoint)));
 
 		/* Get the last valid checkpoint record. */
 		CheckPointLoc = ControlFile->checkPoint;
@@ -786,8 +786,8 @@ InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdown_ptr,
 		if (record != NULL)
 		{
 			ereport(DEBUG1,
-					(errmsg_internal("checkpoint record is at %X/%X",
+					errmsg_internal("checkpoint record is at %X/%08X",
-									 LSN_FORMAT_ARGS(CheckPointLoc))));
+									LSN_FORMAT_ARGS(CheckPointLoc)));
 		}
 		else
 		{
@@ -798,8 +798,8 @@ InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdown_ptr,
 			 * simplify processing around checkpoints.
 			 */
 			ereport(PANIC,
-					(errmsg("could not locate a valid checkpoint record at %X/%X",
+					errmsg("could not locate a valid checkpoint record at %X/%08X",
-							LSN_FORMAT_ARGS(CheckPointLoc))));
+						   LSN_FORMAT_ARGS(CheckPointLoc)));
 		}
 		memcpy(&checkPoint, XLogRecGetData(xlogreader), sizeof(CheckPoint));
 		wasShutdown = ((record->xl_info & ~XLR_INFO_MASK) == XLOG_CHECKPOINT_SHUTDOWN);
@@ -824,8 +824,8 @@ InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdown_ptr,
 							recoveryTargetName)));
 		else if (recoveryTarget == RECOVERY_TARGET_LSN)
 			ereport(LOG,
-					(errmsg("starting point-in-time recovery to WAL location (LSN) \"%X/%X\"",
+					errmsg("starting point-in-time recovery to WAL location (LSN) \"%X/%08X\"",
-							LSN_FORMAT_ARGS(recoveryTargetLSN))));
+						   LSN_FORMAT_ARGS(recoveryTargetLSN)));
 		else if (recoveryTarget == RECOVERY_TARGET_IMMEDIATE)
 			ereport(LOG,
 					(errmsg("starting point-in-time recovery to earliest consistent point")));
@@ -855,7 +855,7 @@ InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdown_ptr,
 				(errmsg("requested timeline %u is not a child of this server's history",
 						recoveryTargetTLI),
 		/* translator: %s is a backup_label file or a pg_control file */
-				 errdetail("Latest checkpoint in file \"%s\" is at %X/%X on timeline %u, but in the history of the requested timeline, the server forked off from that timeline at %X/%X.",
+				 errdetail("Latest checkpoint in file \"%s\" is at %X/%08X on timeline %u, but in the history of the requested timeline, the server forked off from that timeline at %X/%08X.",
 						   haveBackupLabel ? "backup_label" : "pg_control",
 						   LSN_FORMAT_ARGS(CheckPointLoc),
 						   CheckPointTLI,
@@ -870,15 +870,15 @@ InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdown_ptr,
 		tliOfPointInHistory(ControlFile->minRecoveryPoint - 1, expectedTLEs) !=
 		ControlFile->minRecoveryPointTLI)
 		ereport(FATAL,
-				(errmsg("requested timeline %u does not contain minimum recovery point %X/%X on timeline %u",
+				errmsg("requested timeline %u does not contain minimum recovery point %X/%08X on timeline %u",
 					   recoveryTargetTLI,
 					   LSN_FORMAT_ARGS(ControlFile->minRecoveryPoint),
-						ControlFile->minRecoveryPointTLI)));
+					   ControlFile->minRecoveryPointTLI));
 
 	ereport(DEBUG1,
-			(errmsg_internal("redo record is at %X/%X; shutdown %s",
+			errmsg_internal("redo record is at %X/%08X; shutdown %s",
 							LSN_FORMAT_ARGS(checkPoint.redo),
-							 wasShutdown ? "true" : "false")));
+							wasShutdown ? "true" : "false"));
 	ereport(DEBUG1,
 			(errmsg_internal("next transaction ID: " UINT64_FORMAT "; next OID: %u",
 							 U64FromFullTransactionId(checkPoint.nextXid),
@@ -1253,14 +1253,14 @@ read_backup_label(XLogRecPtr *checkPointLoc, TimeLineID *backupLabelTLI,
 	 * is pretty crude, but we are not expecting any variability in the file
 	 * format).
 	 */
-	if (fscanf(lfp, "START WAL LOCATION: %X/%X (file %08X%16s)%c",
+	if (fscanf(lfp, "START WAL LOCATION: %X/%08X (file %08X%16s)%c",
 			   &hi, &lo, &tli_from_walseg, startxlogfilename, &ch) != 5 || ch != '\n')
 		ereport(FATAL,
 				(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
 				 errmsg("invalid data in file \"%s\"", BACKUP_LABEL_FILE)));
 	RedoStartLSN = ((uint64) hi) << 32 | lo;
 	RedoStartTLI = tli_from_walseg;
-	if (fscanf(lfp, "CHECKPOINT LOCATION: %X/%X%c",
+	if (fscanf(lfp, "CHECKPOINT LOCATION: %X/%08X%c",
 			   &hi, &lo, &ch) != 3 || ch != '\n')
 		ereport(FATAL,
 				(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
@@ -1332,7 +1332,7 @@ read_backup_label(XLogRecPtr *checkPointLoc, TimeLineID *backupLabelTLI,
 								 tli_from_file, BACKUP_LABEL_FILE)));
 	}
 
-	if (fscanf(lfp, "INCREMENTAL FROM LSN: %X/%X\n", &hi, &lo) > 0)
+	if (fscanf(lfp, "INCREMENTAL FROM LSN: %X/%08X\n", &hi, &lo) > 0)
 		ereport(FATAL,
 				(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
 				 errmsg("this is an incremental backup, not a data directory"),
@@ -1722,8 +1722,8 @@ PerformWalRecovery(void)
 		if (record->xl_rmid != RM_XLOG_ID ||
 			(record->xl_info & ~XLR_INFO_MASK) != XLOG_CHECKPOINT_REDO)
 			ereport(FATAL,
-					(errmsg("unexpected record type found at redo point %X/%X",
+					errmsg("unexpected record type found at redo point %X/%08X",
-							LSN_FORMAT_ARGS(xlogreader->ReadRecPtr))));
+						   LSN_FORMAT_ARGS(xlogreader->ReadRecPtr)));
 	}
 	else
 	{
@@ -1745,8 +1745,8 @@ PerformWalRecovery(void)
 		RmgrStartup();
 
 		ereport(LOG,
-				(errmsg("redo starts at %X/%X",
+				errmsg("redo starts at %X/%08X",
-						LSN_FORMAT_ARGS(xlogreader->ReadRecPtr))));
+					   LSN_FORMAT_ARGS(xlogreader->ReadRecPtr)));
 
 		/* Prepare to report progress of the redo phase. */
 		if (!StandbyMode)
@@ -1758,7 +1758,7 @@ PerformWalRecovery(void)
 		do
 		{
 			if (!StandbyMode)
-				ereport_startup_progress("redo in progress, elapsed time: %ld.%02d s, current LSN: %X/%X",
+				ereport_startup_progress("redo in progress, elapsed time: %ld.%02d s, current LSN: %X/%08X",
 										 LSN_FORMAT_ARGS(xlogreader->ReadRecPtr));
 
 #ifdef WAL_DEBUG
@@ -1767,7 +1767,7 @@ PerformWalRecovery(void)
 				StringInfoData buf;
 
 				initStringInfo(&buf);
-				appendStringInfo(&buf, "REDO @ %X/%X; LSN %X/%X: ",
+				appendStringInfo(&buf, "REDO @ %X/%08X; LSN %X/%08X: ",
 								 LSN_FORMAT_ARGS(xlogreader->ReadRecPtr),
 								 LSN_FORMAT_ARGS(xlogreader->EndRecPtr));
 				xlog_outrec(&buf, xlogreader);
@@ -1880,9 +1880,9 @@ PerformWalRecovery(void)
 		RmgrCleanup();
 
 		ereport(LOG,
-				(errmsg("redo done at %X/%X system usage: %s",
+				errmsg("redo done at %X/%08X system usage: %s",
 					   LSN_FORMAT_ARGS(xlogreader->ReadRecPtr),
-						pg_rusage_show(&ru0))));
+					   pg_rusage_show(&ru0)));
 		xtime = GetLatestXTime();
 		if (xtime)
 			ereport(LOG,
@@ -2092,7 +2092,7 @@ xlogrecovery_redo(XLogReaderState *record, TimeLineID replayTLI)
 
 		memcpy(&xlrec, XLogRecGetData(record), sizeof(xl_overwrite_contrecord));
 		if (xlrec.overwritten_lsn != record->overwrittenRecPtr)
-			elog(FATAL, "mismatching overwritten LSN %X/%X -> %X/%X",
+			elog(FATAL, "mismatching overwritten LSN %X/%08X -> %X/%08X",
 				 LSN_FORMAT_ARGS(xlrec.overwritten_lsn),
 				 LSN_FORMAT_ARGS(record->overwrittenRecPtr));
 
@@ -2101,9 +2101,9 @@ xlogrecovery_redo(XLogReaderState *record, TimeLineID replayTLI)
 		missingContrecPtr = InvalidXLogRecPtr;
 
 		ereport(LOG,
-				(errmsg("successfully skipped missing contrecord at %X/%X, overwritten at %s",
+				errmsg("successfully skipped missing contrecord at %X/%08X, overwritten at %s",
 					   LSN_FORMAT_ARGS(xlrec.overwritten_lsn),
-						timestamptz_to_str(xlrec.overwrite_time))));
+					   timestamptz_to_str(xlrec.overwrite_time)));
 
 		/* Verifying the record should only happen once */
 		record->overwrittenRecPtr = InvalidXLogRecPtr;
@@ -2129,7 +2129,7 @@ xlogrecovery_redo(XLogReaderState *record, TimeLineID replayTLI)
 			backupEndPoint = lsn;
 		}
 		else
-			elog(DEBUG1, "saw end-of-backup record for backup starting at %X/%X, waiting for %X/%X",
+			elog(DEBUG1, "saw end-of-backup record for backup starting at %X/%08X, waiting for %X/%08X",
 				 LSN_FORMAT_ARGS(startpoint), LSN_FORMAT_ARGS(backupStartPoint));
 	}
 }
@@ -2224,9 +2224,9 @@ CheckRecoveryConsistency(void)
 		backupEndRequired = false;
 
 		ereport(LOG,
-				(errmsg("completed backup recovery with redo LSN %X/%X and end LSN %X/%X",
+				errmsg("completed backup recovery with redo LSN %X/%08X and end LSN %X/%08X",
 					   LSN_FORMAT_ARGS(saveBackupStartPoint),
-						LSN_FORMAT_ARGS(saveBackupEndPoint))));
+					   LSN_FORMAT_ARGS(saveBackupEndPoint)));
 	}
 
 	/*
@@ -2255,8 +2255,8 @@ CheckRecoveryConsistency(void)
 		reachedConsistency = true;
 		SendPostmasterSignal(PMSIGNAL_RECOVERY_CONSISTENT);
 		ereport(LOG,
-				(errmsg("consistent recovery state reached at %X/%X",
+				errmsg("consistent recovery state reached at %X/%08X",
-						LSN_FORMAT_ARGS(lastReplayedEndRecPtr))));
+					   LSN_FORMAT_ARGS(lastReplayedEndRecPtr)));
 	}
 
 	/*
@@ -2293,7 +2293,7 @@ rm_redo_error_callback(void *arg)
 	xlog_block_info(&buf, record);
 
 	/* translator: %s is a WAL record description */
-	errcontext("WAL redo at %X/%X for %s",
+	errcontext("WAL redo at %X/%08X for %s",
 			   LSN_FORMAT_ARGS(record->ReadRecPtr),
 			   buf.data);
 
@@ -2328,7 +2328,7 @@ xlog_outdesc(StringInfo buf, XLogReaderState *record)
 static void
 xlog_outrec(StringInfo buf, XLogReaderState *record)
 {
-	appendStringInfo(buf, "prev %X/%X; xid %u",
+	appendStringInfo(buf, "prev %X/%08X; xid %u",
 					 LSN_FORMAT_ARGS(XLogRecGetPrev(record)),
 					 XLogRecGetXid(record));
 
@@ -2416,10 +2416,10 @@ checkTimeLineSwitch(XLogRecPtr lsn, TimeLineID newTLI, TimeLineID prevTLI,
 		lsn < minRecoveryPoint &&
 		newTLI > minRecoveryPointTLI)
 		ereport(PANIC,
-				(errmsg("unexpected timeline ID %u in checkpoint record, before reaching minimum recovery point %X/%X on timeline %u",
+				errmsg("unexpected timeline ID %u in checkpoint record, before reaching minimum recovery point %X/%08X on timeline %u",
 					   newTLI,
 					   LSN_FORMAT_ARGS(minRecoveryPoint),
-						minRecoveryPointTLI)));
+					   minRecoveryPointTLI));
 
 	/* Looks good */
 }
@@ -2621,8 +2621,8 @@ recoveryStopsBefore(XLogReaderState *record)
 		recoveryStopTime = 0;
 		recoveryStopName[0] = '\0';
 		ereport(LOG,
-				(errmsg("recovery stopping before WAL location (LSN) \"%X/%X\"",
+				errmsg("recovery stopping before WAL location (LSN) \"%X/%08X\"",
-						LSN_FORMAT_ARGS(recoveryStopLSN))));
+					   LSN_FORMAT_ARGS(recoveryStopLSN)));
 		return true;
 	}
 
@@ -2789,8 +2789,8 @@ recoveryStopsAfter(XLogReaderState *record)
 		recoveryStopTime = 0;
 		recoveryStopName[0] = '\0';
 		ereport(LOG,
-				(errmsg("recovery stopping after WAL location (LSN) \"%X/%X\"",
+				errmsg("recovery stopping after WAL location (LSN) \"%X/%08X\"",
-						LSN_FORMAT_ARGS(recoveryStopLSN))));
+					   LSN_FORMAT_ARGS(recoveryStopLSN)));
 		return true;
 	}
 
@@ -2910,7 +2910,7 @@ getRecoveryStopReason(void)
 				 timestamptz_to_str(recoveryStopTime));
 	else if (recoveryTarget == RECOVERY_TARGET_LSN)
 		snprintf(reason, sizeof(reason),
-				 "%s LSN %X/%X\n",
+				 "%s LSN %X/%08X\n",
 				 recoveryStopAfter ? "after" : "before",
 				 LSN_FORMAT_ARGS(recoveryStopLSN));
 	else if (recoveryTarget == RECOVERY_TARGET_NAME)
@@ -3213,11 +3213,11 @@ ReadRecord(XLogPrefetcher *xlogprefetcher, int emode,
 			XLogFileName(fname, xlogreader->seg.ws_tli, segno,
 						 wal_segment_size);
 			ereport(emode_for_corrupt_record(emode, xlogreader->EndRecPtr),
-					(errmsg("unexpected timeline ID %u in WAL segment %s, LSN %X/%X, offset %u",
+					errmsg("unexpected timeline ID %u in WAL segment %s, LSN %X/%08X, offset %u",
 						   xlogreader->latestPageTLI,
 						   fname,
 						   LSN_FORMAT_ARGS(xlogreader->latestPagePtr),
-							offset)));
+						   offset));
 			record = NULL;
 		}
 
@@ -3429,14 +3429,14 @@ retry:
 			errno = save_errno;
 			ereport(emode_for_corrupt_record(emode, targetPagePtr + reqLen),
 					(errcode_for_file_access(),
-					 errmsg("could not read from WAL segment %s, LSN %X/%X, offset %u: %m",
+					 errmsg("could not read from WAL segment %s, LSN %X/%08X, offset %u: %m",
 							fname, LSN_FORMAT_ARGS(targetPagePtr),
 							readOff)));
 		}
 		else
 			ereport(emode_for_corrupt_record(emode, targetPagePtr + reqLen),
 					(errcode(ERRCODE_DATA_CORRUPTED),
-					 errmsg("could not read from WAL segment %s, LSN %X/%X, offset %u: read %d of %zu",
+					 errmsg("could not read from WAL segment %s, LSN %X/%08X, offset %u: read %d of %zu",
 							fname, LSN_FORMAT_ARGS(targetPagePtr),
 							readOff, r, (Size) XLOG_BLCKSZ)));
 		goto next_record_is_invalid;
@@ -3718,7 +3718,7 @@ WaitForWALToBecomeAvailable(XLogRecPtr RecPtr, bool randAccess,
 						wait_time = wal_retrieve_retry_interval -
 							TimestampDifferenceMilliseconds(last_fail_time, now);
 
-						elog(LOG, "waiting for WAL to become available at %X/%X",
+						elog(LOG, "waiting for WAL to become available at %X/%08X",
 							 LSN_FORMAT_ARGS(RecPtr));
 
 						/* Do background tasks that might benefit us later. */
@@ -3864,7 +3864,7 @@ WaitForWALToBecomeAvailable(XLogRecPtr RecPtr, bool randAccess,
 							tli = tliOfPointInHistory(tliRecPtr, expectedTLEs);
 
 							if (curFileTLI > 0 && tli < curFileTLI)
-								elog(ERROR, "according to history file, WAL location %X/%X belongs to timeline %u, but previous recovered WAL file came from timeline %u",
+								elog(ERROR, "according to history file, WAL location %X/%08X belongs to timeline %u, but previous recovered WAL file came from timeline %u",
 									 LSN_FORMAT_ARGS(tliRecPtr),
 									 tli, curFileTLI);
 						}
@@ -4177,10 +4177,10 @@ rescanLatestTimeLine(TimeLineID replayTLI, XLogRecPtr replayLSN)
 	if (currentTle->end < replayLSN)
 	{
 		ereport(LOG,
-				(errmsg("new timeline %u forked off current database system timeline %u before current recovery point %X/%X",
+				errmsg("new timeline %u forked off current database system timeline %u before current recovery point %X/%08X",
 					   newtarget,
 					   replayTLI,
-						LSN_FORMAT_ARGS(replayLSN))));
+					   LSN_FORMAT_ARGS(replayLSN)));
 		return false;
 	}
 

src/backend/access/transam/xlogutils.c

@@ -795,7 +795,7 @@ XLogReadDetermineTimeline(XLogReaderState *state, XLogRecPtr wantPage,
 
 		list_free_deep(timelineHistory);
 
-		elog(DEBUG3, "switched to timeline %u valid until %X/%X",
+		elog(DEBUG3, "switched to timeline %u valid until %X/%08X",
 			 state->currTLI,
 			 LSN_FORMAT_ARGS(state->currTLIValidUntil));
 	}

src/backend/backup/backup_manifest.c

@@ -281,7 +281,7 @@ AddWALInfoToBackupManifest(backup_manifest_info *manifest, XLogRecPtr startptr,
 		}
 
 		AppendToManifest(manifest,
-						 "%s{ \"Timeline\": %u, \"Start-LSN\": \"%X/%X\", \"End-LSN\": \"%X/%X\" }",
+						 "%s{ \"Timeline\": %u, \"Start-LSN\": \"%X/%08X\", \"End-LSN\": \"%X/%08X\" }",
 						 first_wal_range ? "" : ",\n",
 						 entry->tli,
 						 LSN_FORMAT_ARGS(tl_beginptr),

src/backend/backup/basebackup_copy.c

@@ -361,7 +361,7 @@ SendXlogRecPtrResult(XLogRecPtr ptr, TimeLineID tli)
 	tstate = begin_tup_output_tupdesc(dest, tupdesc, &TTSOpsVirtual);
 
 	/* Data row */
-	values[0] = CStringGetTextDatum(psprintf("%X/%X", LSN_FORMAT_ARGS(ptr)));
+	values[0] = CStringGetTextDatum(psprintf("%X/%08X", LSN_FORMAT_ARGS(ptr)));
 	values[1] = Int64GetDatum(tli);
 	do_tup_output(tstate, values, nulls);
 

src/backend/backup/basebackup_incremental.c

@@ -409,7 +409,7 @@ PrepareForIncrementalBackup(IncrementalBackupInfo *ib,
 			if (range->start_lsn < tlep[i]->begin)
 				ereport(ERROR,
 						(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
-						 errmsg("manifest requires WAL from initial timeline %u starting at %X/%X, but that timeline begins at %X/%X",
+						 errmsg("manifest requires WAL from initial timeline %u starting at %X/%08X, but that timeline begins at %X/%08X",
 								range->tli,
 								LSN_FORMAT_ARGS(range->start_lsn),
 								LSN_FORMAT_ARGS(tlep[i]->begin))));
@@ -419,7 +419,7 @@ PrepareForIncrementalBackup(IncrementalBackupInfo *ib,
 			if (range->start_lsn != tlep[i]->begin)
 				ereport(ERROR,
 						(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
-						 errmsg("manifest requires WAL from continuation timeline %u starting at %X/%X, but that timeline begins at %X/%X",
+						 errmsg("manifest requires WAL from continuation timeline %u starting at %X/%08X, but that timeline begins at %X/%08X",
 								range->tli,
 								LSN_FORMAT_ARGS(range->start_lsn),
 								LSN_FORMAT_ARGS(tlep[i]->begin))));
@@ -430,7 +430,7 @@ PrepareForIncrementalBackup(IncrementalBackupInfo *ib,
 			if (range->end_lsn > backup_state->startpoint)
 				ereport(ERROR,
 						(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
-						 errmsg("manifest requires WAL from final timeline %u ending at %X/%X, but this backup starts at %X/%X",
+						 errmsg("manifest requires WAL from final timeline %u ending at %X/%08X, but this backup starts at %X/%08X",
 								range->tli,
 								LSN_FORMAT_ARGS(range->end_lsn),
 								LSN_FORMAT_ARGS(backup_state->startpoint)),
@@ -441,7 +441,7 @@ PrepareForIncrementalBackup(IncrementalBackupInfo *ib,
 			if (range->end_lsn != tlep[i]->end)
 				ereport(ERROR,
 						(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
-						 errmsg("manifest requires WAL from non-final timeline %u ending at %X/%X, but this server switched timelines at %X/%X",
+						 errmsg("manifest requires WAL from non-final timeline %u ending at %X/%08X, but this server switched timelines at %X/%08X",
 								range->tli,
 								LSN_FORMAT_ARGS(range->end_lsn),
 								LSN_FORMAT_ARGS(tlep[i]->end))));
@@ -522,18 +522,18 @@ PrepareForIncrementalBackup(IncrementalBackupInfo *ib,
 			if (XLogRecPtrIsInvalid(tli_missing_lsn))
 				ereport(ERROR,
 						(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
-						 errmsg("WAL summaries are required on timeline %u from %X/%X to %X/%X, but no summaries for that timeline and LSN range exist",
+						 errmsg("WAL summaries are required on timeline %u from %X/%08X to %X/%08X, but no summaries for that timeline and LSN range exist",
 								tle->tli,
 								LSN_FORMAT_ARGS(tli_start_lsn),
 								LSN_FORMAT_ARGS(tli_end_lsn))));
 			else
 				ereport(ERROR,
 						(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
-						 errmsg("WAL summaries are required on timeline %u from %X/%X to %X/%X, but the summaries for that timeline and LSN range are incomplete",
+						 errmsg("WAL summaries are required on timeline %u from %X/%08X to %X/%08X, but the summaries for that timeline and LSN range are incomplete",
 								tle->tli,
 								LSN_FORMAT_ARGS(tli_start_lsn),
 								LSN_FORMAT_ARGS(tli_end_lsn)),
-						 errdetail("The first unsummarized LSN in this range is %X/%X.",
+						 errdetail("The first unsummarized LSN in this range is %X/%08X.",
 								   LSN_FORMAT_ARGS(tli_missing_lsn))));
 		}
 

src/backend/commands/subscriptioncmds.c

@@ -1539,7 +1539,7 @@ AlterSubscription(ParseState *pstate, AlterSubscriptionStmt *stmt,
 					if (!XLogRecPtrIsInvalid(remote_lsn) && opts.lsn < remote_lsn)
 						ereport(ERROR,
 								(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
-								 errmsg("skip WAL location (LSN %X/%X) must be greater than origin LSN %X/%X",
+								 errmsg("skip WAL location (LSN %X/%08X) must be greater than origin LSN %X/%08X",
 										LSN_FORMAT_ARGS(opts.lsn),
 										LSN_FORMAT_ARGS(remote_lsn))));
 				}

src/backend/postmaster/walsummarizer.c

@@ -385,7 +385,7 @@ WalSummarizerMain(const void *startup_data, size_t startup_data_len)
 
 			switch_lsn = tliSwitchPoint(current_tli, tles, &switch_tli);
 			ereport(DEBUG1,
-					errmsg_internal("switch point from TLI %u to TLI %u is at %X/%X",
+					errmsg_internal("switch point from TLI %u to TLI %u is at %X/%08X",
 									current_tli, switch_tli, LSN_FORMAT_ARGS(switch_lsn)));
 		}
 
@@ -741,7 +741,7 @@ WaitForWalSummarization(XLogRecPtr lsn)
 				ereport(ERROR,
 						(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
 						 errmsg("WAL summarization is not progressing"),
-						 errdetail("Summarization is needed through %X/%X, but is stuck at %X/%X on disk and %X/%X in memory.",
+						 errdetail("Summarization is needed through %X/%08X, but is stuck at %X/%08X on disk and %X/%08X in memory.",
 								   LSN_FORMAT_ARGS(lsn),
 								   LSN_FORMAT_ARGS(summarized_lsn),
 								   LSN_FORMAT_ARGS(pending_lsn))));
@@ -755,12 +755,12 @@ WaitForWalSummarization(XLogRecPtr lsn)
 												current_time) / 1000;
 			ereport(WARNING,
 					(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
-					 errmsg_plural("still waiting for WAL summarization through %X/%X after %ld second",
+					 errmsg_plural("still waiting for WAL summarization through %X/%08X after %ld second",
-								   "still waiting for WAL summarization through %X/%X after %ld seconds",
+								   "still waiting for WAL summarization through %X/%08X after %ld seconds",
 								   elapsed_seconds,
 								   LSN_FORMAT_ARGS(lsn),
 								   elapsed_seconds),
-					 errdetail("Summarization has reached %X/%X on disk and %X/%X in memory.",
+					 errdetail("Summarization has reached %X/%08X on disk and %X/%08X in memory.",
 							   LSN_FORMAT_ARGS(summarized_lsn),
 							   LSN_FORMAT_ARGS(pending_lsn))));
 		}
@@ -981,7 +981,7 @@ SummarizeWAL(TimeLineID tli, XLogRecPtr start_lsn, bool exact,
 			if (private_data->end_of_wal)
 			{
 				ereport(DEBUG1,
-						errmsg_internal("could not read WAL from timeline %u at %X/%X: end of WAL at %X/%X",
+						errmsg_internal("could not read WAL from timeline %u at %X/%08X: end of WAL at %X/%08X",
 										tli,
 										LSN_FORMAT_ARGS(start_lsn),
 										LSN_FORMAT_ARGS(private_data->read_upto)));
@@ -1000,8 +1000,8 @@ SummarizeWAL(TimeLineID tli, XLogRecPtr start_lsn, bool exact,
 			}
 			else
 				ereport(ERROR,
-						(errmsg("could not find a valid record after %X/%X",
+						errmsg("could not find a valid record after %X/%08X",
-								LSN_FORMAT_ARGS(start_lsn))));
+							   LSN_FORMAT_ARGS(start_lsn)));
 		}
 
 		/* We shouldn't go backward. */
@@ -1034,7 +1034,7 @@ SummarizeWAL(TimeLineID tli, XLogRecPtr start_lsn, bool exact,
 				 * able to read a complete record.
 				 */
 				ereport(DEBUG1,
-						errmsg_internal("could not read WAL from timeline %u at %X/%X: end of WAL at %X/%X",
+						errmsg_internal("could not read WAL from timeline %u at %X/%08X: end of WAL at %X/%08X",
 										tli,
 										LSN_FORMAT_ARGS(xlogreader->EndRecPtr),
 										LSN_FORMAT_ARGS(private_data->read_upto)));
@@ -1045,13 +1045,13 @@ SummarizeWAL(TimeLineID tli, XLogRecPtr start_lsn, bool exact,
 			if (errormsg)
 				ereport(ERROR,
 						(errcode_for_file_access(),
-						 errmsg("could not read WAL from timeline %u at %X/%X: %s",
+						 errmsg("could not read WAL from timeline %u at %X/%08X: %s",
 								tli, LSN_FORMAT_ARGS(xlogreader->EndRecPtr),
 								errormsg)));
 			else
 				ereport(ERROR,
 						(errcode_for_file_access(),
-						 errmsg("could not read WAL from timeline %u at %X/%X",
+						 errmsg("could not read WAL from timeline %u at %X/%08X",
 								tli, LSN_FORMAT_ARGS(xlogreader->EndRecPtr))));
 		}
 
@@ -1222,7 +1222,7 @@ SummarizeWAL(TimeLineID tli, XLogRecPtr start_lsn, bool exact,
 
 		/* Tell the user what we did. */
 		ereport(DEBUG1,
-				errmsg_internal("summarized WAL on TLI %u from %X/%X to %X/%X",
+				errmsg_internal("summarized WAL on TLI %u from %X/%08X to %X/%08X",
 								tli,
 								LSN_FORMAT_ARGS(summary_start_lsn),
 								LSN_FORMAT_ARGS(summary_end_lsn)));
@@ -1234,7 +1234,7 @@ SummarizeWAL(TimeLineID tli, XLogRecPtr start_lsn, bool exact,
 	/* If we skipped a non-zero amount of WAL, log a debug message. */
 	if (summary_end_lsn > summary_start_lsn && fast_forward)
 		ereport(DEBUG1,
-				errmsg_internal("skipped summarizing WAL on TLI %u from %X/%X to %X/%X",
+				errmsg_internal("skipped summarizing WAL on TLI %u from %X/%08X to %X/%08X",
 								tli,
 								LSN_FORMAT_ARGS(summary_start_lsn),
 								LSN_FORMAT_ARGS(summary_end_lsn)));
@@ -1580,7 +1580,7 @@ summarizer_read_local_xlog_page(XLogReaderState *state,
 
 					/* Debugging output. */
 					ereport(DEBUG1,
-							errmsg_internal("timeline %u became historic, can read up to %X/%X",
+							errmsg_internal("timeline %u became historic, can read up to %X/%08X",
 											private_data->tli, LSN_FORMAT_ARGS(private_data->read_upto)));
 				}
 

src/backend/replication/libpqwalreceiver/libpqwalreceiver.c

@@ -534,7 +534,7 @@ libpqrcv_startstreaming(WalReceiverConn *conn,
 	if (options->logical)
 		appendStringInfoString(&cmd, " LOGICAL");
 
-	appendStringInfo(&cmd, " %X/%X", LSN_FORMAT_ARGS(options->startpoint));
+	appendStringInfo(&cmd, " %X/%08X", LSN_FORMAT_ARGS(options->startpoint));
 
 	/*
 	 * Additional options are different depending on if we are doing logical

src/backend/replication/logical/logical.c

@@ -567,7 +567,7 @@ CreateDecodingContext(XLogRecPtr start_lsn,
 		 * kinds of client errors; so the client may wish to check that
 		 * confirmed_flush_lsn matches its expectations.
 		 */
-		elog(LOG, "%X/%X has been already streamed, forwarding to %X/%X",
+		elog(LOG, "%X/%08X has been already streamed, forwarding to %X/%08X",
 			 LSN_FORMAT_ARGS(start_lsn),
 			 LSN_FORMAT_ARGS(slot->data.confirmed_flush));
 
@@ -610,7 +610,7 @@ CreateDecodingContext(XLogRecPtr start_lsn,
 	ereport(LOG,
 			(errmsg("starting logical decoding for slot \"%s\"",
 					NameStr(slot->data.name)),
-			 errdetail("Streaming transactions committing after %X/%X, reading WAL from %X/%X.",
+			 errdetail("Streaming transactions committing after %X/%08X, reading WAL from %X/%08X.",
 					   LSN_FORMAT_ARGS(slot->data.confirmed_flush),
 					   LSN_FORMAT_ARGS(slot->data.restart_lsn))));
 
@@ -637,7 +637,7 @@ DecodingContextFindStartpoint(LogicalDecodingContext *ctx)
 	/* Initialize from where to start reading WAL. */
 	XLogBeginRead(ctx->reader, slot->data.restart_lsn);
 
-	elog(DEBUG1, "searching for logical decoding starting point, starting at %X/%X",
+	elog(DEBUG1, "searching for logical decoding starting point, starting at %X/%08X",
 		 LSN_FORMAT_ARGS(slot->data.restart_lsn));
 
 	/* Wait for a consistent starting point */
@@ -758,7 +758,7 @@ output_plugin_error_callback(void *arg)
 
 	/* not all callbacks have an associated LSN  */
 	if (state->report_location != InvalidXLogRecPtr)
-		errcontext("slot \"%s\", output plugin \"%s\", in the %s callback, associated LSN %X/%X",
+		errcontext("slot \"%s\", output plugin \"%s\", in the %s callback, associated LSN %X/%08X",
 				   NameStr(state->ctx->slot->data.name),
 				   NameStr(state->ctx->slot->data.plugin),
 				   state->callback_name,
@@ -1725,7 +1725,7 @@ LogicalIncreaseXminForSlot(XLogRecPtr current_lsn, TransactionId xmin)
 	SpinLockRelease(&slot->mutex);
 
 	if (got_new_xmin)
-		elog(DEBUG1, "got new catalog xmin %u at %X/%X", xmin,
+		elog(DEBUG1, "got new catalog xmin %u at %X/%08X", xmin,
 			 LSN_FORMAT_ARGS(current_lsn));
 
 	/* candidate already valid with the current flush position, apply */
@@ -1785,7 +1785,7 @@ LogicalIncreaseRestartDecodingForSlot(XLogRecPtr current_lsn, XLogRecPtr restart
 		slot->candidate_restart_lsn = restart_lsn;
 		SpinLockRelease(&slot->mutex);
 
-		elog(DEBUG1, "got new restart lsn %X/%X at %X/%X",
+		elog(DEBUG1, "got new restart lsn %X/%08X at %X/%08X",
 			 LSN_FORMAT_ARGS(restart_lsn),
 			 LSN_FORMAT_ARGS(current_lsn));
 	}
@@ -1800,7 +1800,7 @@ LogicalIncreaseRestartDecodingForSlot(XLogRecPtr current_lsn, XLogRecPtr restart
 		confirmed_flush = slot->data.confirmed_flush;
 		SpinLockRelease(&slot->mutex);
 
-		elog(DEBUG1, "failed to increase restart lsn: proposed %X/%X, after %X/%X, current candidate %X/%X, current after %X/%X, flushed up to %X/%X",
+		elog(DEBUG1, "failed to increase restart lsn: proposed %X/%08X, after %X/%08X, current candidate %X/%08X, current after %X/%08X, flushed up to %X/%08X",
 			 LSN_FORMAT_ARGS(restart_lsn),
 			 LSN_FORMAT_ARGS(current_lsn),
 			 LSN_FORMAT_ARGS(candidate_restart_lsn),

src/backend/replication/logical/origin.c

@@ -826,9 +826,9 @@ StartupReplicationOrigin(void)
 		last_state++;
 
 		ereport(LOG,
-				(errmsg("recovered replication state of node %d to %X/%X",
+				errmsg("recovered replication state of node %d to %X/%08X",
 					   disk_state.roident,
-						LSN_FORMAT_ARGS(disk_state.remote_lsn))));
+					   LSN_FORMAT_ARGS(disk_state.remote_lsn)));
 	}
 
 	/* now check checksum */

src/backend/replication/logical/slotsync.c

@@ -213,7 +213,7 @@ update_local_synced_slot(RemoteSlot *remote_slot, Oid remote_dbid,
 		ereport(slot->data.persistency == RS_TEMPORARY ? LOG : DEBUG1,
 				errmsg("could not synchronize replication slot \"%s\"",
 					   remote_slot->name),
-				errdetail("Synchronization could lead to data loss, because the remote slot needs WAL at LSN %X/%X and catalog xmin %u, but the standby has LSN %X/%X and catalog xmin %u.",
+				errdetail("Synchronization could lead to data loss, because the remote slot needs WAL at LSN %X/%08X and catalog xmin %u, but the standby has LSN %X/%08X and catalog xmin %u.",
 						  LSN_FORMAT_ARGS(remote_slot->restart_lsn),
 						  remote_slot->catalog_xmin,
 						  LSN_FORMAT_ARGS(slot->data.restart_lsn),
@@ -275,7 +275,7 @@ update_local_synced_slot(RemoteSlot *remote_slot, Oid remote_dbid,
 				ereport(ERROR,
 						errmsg_internal("synchronized confirmed_flush for slot \"%s\" differs from remote slot",
 										remote_slot->name),
-						errdetail_internal("Remote slot has LSN %X/%X but local slot has LSN %X/%X.",
+						errdetail_internal("Remote slot has LSN %X/%08X but local slot has LSN %X/%08X.",
 										   LSN_FORMAT_ARGS(remote_slot->confirmed_lsn),
 										   LSN_FORMAT_ARGS(slot->data.confirmed_flush)));
 		}
@@ -593,7 +593,7 @@ update_and_persist_local_synced_slot(RemoteSlot *remote_slot, Oid remote_dbid)
 	{
 		ereport(LOG,
 				errmsg("could not synchronize replication slot \"%s\"", remote_slot->name),
-				errdetail("Synchronization could lead to data loss, because the standby could not build a consistent snapshot to decode WALs at LSN %X/%X.",
+				errdetail("Synchronization could lead to data loss, because the standby could not build a consistent snapshot to decode WALs at LSN %X/%08X.",
 						  LSN_FORMAT_ARGS(slot->data.restart_lsn)));
 
 		return false;
@@ -642,7 +642,7 @@ synchronize_one_slot(RemoteSlot *remote_slot, Oid remote_dbid)
 		ereport(AmLogicalSlotSyncWorkerProcess() ? LOG : ERROR,
 				errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
 				errmsg("skipping slot synchronization because the received slot sync"
-					   " LSN %X/%X for slot \"%s\" is ahead of the standby position %X/%X",
+					   " LSN %X/%08X for slot \"%s\" is ahead of the standby position %X/%08X",
 					   LSN_FORMAT_ARGS(remote_slot->confirmed_lsn),
 					   remote_slot->name,
 					   LSN_FORMAT_ARGS(latestFlushPtr)));
@@ -733,7 +733,7 @@ synchronize_one_slot(RemoteSlot *remote_slot, Oid remote_dbid)
 				ereport(ERROR,
 						errmsg_internal("cannot synchronize local slot \"%s\"",
 										remote_slot->name),
-						errdetail_internal("Local slot's start streaming location LSN(%X/%X) is ahead of remote slot's LSN(%X/%X).",
+						errdetail_internal("Local slot's start streaming location LSN(%X/%08X) is ahead of remote slot's LSN(%X/%08X).",
 										   LSN_FORMAT_ARGS(slot->data.confirmed_flush),
 										   LSN_FORMAT_ARGS(remote_slot->confirmed_lsn)));
 

src/backend/replication/logical/snapbuild.c

@@ -774,7 +774,7 @@ SnapBuildDistributeSnapshotAndInval(SnapBuild *builder, XLogRecPtr lsn, Transact
 		if (rbtxn_is_prepared(txn))
 			continue;
 
-		elog(DEBUG2, "adding a new snapshot and invalidations to %u at %X/%X",
+		elog(DEBUG2, "adding a new snapshot and invalidations to %u at %X/%08X",
 			 txn->xid, LSN_FORMAT_ARGS(lsn));
 
 		/*
@@ -1271,10 +1271,10 @@ SnapBuildFindSnapshot(SnapBuild *builder, XLogRecPtr lsn, xl_running_xacts *runn
 									builder->initial_xmin_horizon))
 	{
 		ereport(DEBUG1,
-				(errmsg_internal("skipping snapshot at %X/%X while building logical decoding snapshot, xmin horizon too low",
+				errmsg_internal("skipping snapshot at %X/%08X while building logical decoding snapshot, xmin horizon too low",
 								LSN_FORMAT_ARGS(lsn)),
 				errdetail_internal("initial xmin horizon of %u vs the snapshot's %u",
-									builder->initial_xmin_horizon, running->oldestRunningXid)));
+								   builder->initial_xmin_horizon, running->oldestRunningXid));
 
 
 		SnapBuildWaitSnapshot(running, builder->initial_xmin_horizon);
@@ -1310,9 +1310,9 @@ SnapBuildFindSnapshot(SnapBuild *builder, XLogRecPtr lsn, xl_running_xacts *runn
 		builder->next_phase_at = InvalidTransactionId;
 
 		ereport(LOG,
-				(errmsg("logical decoding found consistent point at %X/%X",
+				errmsg("logical decoding found consistent point at %X/%08X",
 					   LSN_FORMAT_ARGS(lsn)),
-				 errdetail("There are no running transactions.")));
+				errdetail("There are no running transactions."));
 
 		return false;
 	}
@@ -1359,10 +1359,10 @@ SnapBuildFindSnapshot(SnapBuild *builder, XLogRecPtr lsn, xl_running_xacts *runn
 		Assert(TransactionIdIsNormal(builder->xmax));
 
 		ereport(LOG,
-				(errmsg("logical decoding found initial starting point at %X/%X",
+				errmsg("logical decoding found initial starting point at %X/%08X",
 					   LSN_FORMAT_ARGS(lsn)),
 				errdetail("Waiting for transactions (approximately %d) older than %u to end.",
-						   running->xcnt, running->nextXid)));
+						  running->xcnt, running->nextXid));
 
 		SnapBuildWaitSnapshot(running, running->nextXid);
 	}
@@ -1383,10 +1383,10 @@ SnapBuildFindSnapshot(SnapBuild *builder, XLogRecPtr lsn, xl_running_xacts *runn
 		builder->next_phase_at = running->nextXid;
 
 		ereport(LOG,
-				(errmsg("logical decoding found initial consistent point at %X/%X",
+				errmsg("logical decoding found initial consistent point at %X/%08X",
 					   LSN_FORMAT_ARGS(lsn)),
 				errdetail("Waiting for transactions (approximately %d) older than %u to end.",
-						   running->xcnt, running->nextXid)));
+						  running->xcnt, running->nextXid));
 
 		SnapBuildWaitSnapshot(running, running->nextXid);
 	}
@@ -1407,9 +1407,9 @@ SnapBuildFindSnapshot(SnapBuild *builder, XLogRecPtr lsn, xl_running_xacts *runn
 		builder->next_phase_at = InvalidTransactionId;
 
 		ereport(LOG,
-				(errmsg("logical decoding found consistent point at %X/%X",
+				errmsg("logical decoding found consistent point at %X/%08X",
 					   LSN_FORMAT_ARGS(lsn)),
-				 errdetail("There are no old transactions anymore.")));
+				errdetail("There are no old transactions anymore."));
 	}
 
 	/*
@@ -1913,9 +1913,9 @@ SnapBuildRestore(SnapBuild *builder, XLogRecPtr lsn)
 	Assert(builder->state == SNAPBUILD_CONSISTENT);
 
 	ereport(LOG,
-			(errmsg("logical decoding found consistent point at %X/%X",
+			errmsg("logical decoding found consistent point at %X/%08X",
 				   LSN_FORMAT_ARGS(lsn)),
-			 errdetail("Logical decoding will begin using saved snapshot.")));
+			errdetail("Logical decoding will begin using saved snapshot."));
 	return true;
 
 snapshot_not_interesting:
@@ -2061,7 +2061,7 @@ SnapBuildSnapshotExists(XLogRecPtr lsn)
 	int			ret;
 	struct stat stat_buf;
 
-	sprintf(path, "%s/%X-%X.snap",
+	sprintf(path, "%s/%08X-%08X.snap",
 			PG_LOGICAL_SNAPSHOTS_DIR,
 			LSN_FORMAT_ARGS(lsn));
 

src/backend/replication/logical/tablesync.c

@@ -1553,7 +1553,7 @@ LogicalRepSyncTableStart(XLogRecPtr *origin_startpos)
 copy_table_done:
 
 	elog(DEBUG1,
-		 "LogicalRepSyncTableStart: '%s' origin_startpos lsn %X/%X",
+		 "LogicalRepSyncTableStart: '%s' origin_startpos lsn %X/%08X",
 		 originname, LSN_FORMAT_ARGS(*origin_startpos));
 
 	/*

src/backend/replication/logical/worker.c

@@ -1016,7 +1016,7 @@ apply_handle_commit(StringInfo s)
 	if (commit_data.commit_lsn != remote_final_lsn)
 		ereport(ERROR,
 				(errcode(ERRCODE_PROTOCOL_VIOLATION),
-				 errmsg_internal("incorrect commit LSN %X/%X in commit message (expected %X/%X)",
+				 errmsg_internal("incorrect commit LSN %X/%08X in commit message (expected %X/%08X)",
 								 LSN_FORMAT_ARGS(commit_data.commit_lsn),
 								 LSN_FORMAT_ARGS(remote_final_lsn))));
 
@@ -1108,7 +1108,7 @@ apply_handle_prepare(StringInfo s)
 	if (prepare_data.prepare_lsn != remote_final_lsn)
 		ereport(ERROR,
 				(errcode(ERRCODE_PROTOCOL_VIOLATION),
-				 errmsg_internal("incorrect prepare LSN %X/%X in prepare message (expected %X/%X)",
+				 errmsg_internal("incorrect prepare LSN %X/%08X in prepare message (expected %X/%08X)",
 								 LSN_FORMAT_ARGS(prepare_data.prepare_lsn),
 								 LSN_FORMAT_ARGS(remote_final_lsn))));
 
@@ -3903,7 +3903,7 @@ send_feedback(XLogRecPtr recvpos, bool force, bool requestReply)
 	pq_sendint64(reply_message, now);	/* sendTime */
 	pq_sendbyte(reply_message, requestReply);	/* replyRequested */
 
-	elog(DEBUG2, "sending feedback (force %d) to recv %X/%X, write %X/%X, flush %X/%X",
+	elog(DEBUG2, "sending feedback (force %d) to recv %X/%08X, write %X/%08X, flush %X/%08X",
 		 force,
 		 LSN_FORMAT_ARGS(recvpos),
 		 LSN_FORMAT_ARGS(writepos),
@@ -4909,7 +4909,7 @@ maybe_start_skipping_changes(XLogRecPtr finish_lsn)
 	skip_xact_finish_lsn = finish_lsn;
 
 	ereport(LOG,
-			errmsg("logical replication starts skipping transaction at LSN %X/%X",
+			errmsg("logical replication starts skipping transaction at LSN %X/%08X",
 				   LSN_FORMAT_ARGS(skip_xact_finish_lsn)));
 }
 
@@ -4923,8 +4923,8 @@ stop_skipping_changes(void)
 		return;
 
 	ereport(LOG,
-			(errmsg("logical replication completed skipping transaction at LSN %X/%X",
+			errmsg("logical replication completed skipping transaction at LSN %X/%08X",
-					LSN_FORMAT_ARGS(skip_xact_finish_lsn))));
+				   LSN_FORMAT_ARGS(skip_xact_finish_lsn)));
 
 	/* Stop skipping changes */
 	skip_xact_finish_lsn = InvalidXLogRecPtr;
@@ -5012,7 +5012,7 @@ clear_subscription_skip_lsn(XLogRecPtr finish_lsn)
 		if (myskiplsn != finish_lsn)
 			ereport(WARNING,
 					errmsg("skip-LSN of subscription \"%s\" cleared", MySubscription->name),
-					errdetail("Remote transaction's finish WAL location (LSN) %X/%X did not match skip-LSN %X/%X.",
+					errdetail("Remote transaction's finish WAL location (LSN) %X/%08X did not match skip-LSN %X/%08X.",
 							  LSN_FORMAT_ARGS(finish_lsn),
 							  LSN_FORMAT_ARGS(myskiplsn)));
 	}
@@ -5049,7 +5049,7 @@ apply_error_callback(void *arg)
 					   logicalrep_message_type(errarg->command),
 					   errarg->remote_xid);
 		else
-			errcontext("processing remote data for replication origin \"%s\" during message type \"%s\" in transaction %u, finished at %X/%X",
+			errcontext("processing remote data for replication origin \"%s\" during message type \"%s\" in transaction %u, finished at %X/%08X",
 					   errarg->origin_name,
 					   logicalrep_message_type(errarg->command),
 					   errarg->remote_xid,
@@ -5067,7 +5067,7 @@ apply_error_callback(void *arg)
 						   errarg->rel->remoterel.relname,
 						   errarg->remote_xid);
 			else
-				errcontext("processing remote data for replication origin \"%s\" during message type \"%s\" for replication target relation \"%s.%s\" in transaction %u, finished at %X/%X",
+				errcontext("processing remote data for replication origin \"%s\" during message type \"%s\" for replication target relation \"%s.%s\" in transaction %u, finished at %X/%08X",
 						   errarg->origin_name,
 						   logicalrep_message_type(errarg->command),
 						   errarg->rel->remoterel.nspname,
@@ -5086,7 +5086,7 @@ apply_error_callback(void *arg)
 						   errarg->rel->remoterel.attnames[errarg->remote_attnum],
 						   errarg->remote_xid);
 			else
-				errcontext("processing remote data for replication origin \"%s\" during message type \"%s\" for replication target relation \"%s.%s\" column \"%s\" in transaction %u, finished at %X/%X",
+				errcontext("processing remote data for replication origin \"%s\" during message type \"%s\" for replication target relation \"%s.%s\" column \"%s\" in transaction %u, finished at %X/%08X",
 						   errarg->origin_name,
 						   logicalrep_message_type(errarg->command),
 						   errarg->rel->remoterel.nspname,

src/backend/replication/repl_gram.y

@@ -279,7 +279,7 @@ alter_replication_slot:
 			;
 
 /*
- * START_REPLICATION [SLOT slot] [PHYSICAL] %X/%X [TIMELINE %u]
+ * START_REPLICATION [SLOT slot] [PHYSICAL] %X/%08X [TIMELINE %u]
  */
 start_replication:
 			K_START_REPLICATION opt_slot opt_physical RECPTR opt_timeline
@@ -295,7 +295,7 @@ start_replication:
 				}
 			;
 
-/* START_REPLICATION SLOT slot LOGICAL %X/%X options */
+/* START_REPLICATION SLOT slot LOGICAL %X/%08X options */
 start_logical_replication:
 			K_START_REPLICATION K_SLOT IDENT K_LOGICAL RECPTR plugin_options
 				{

src/backend/replication/repl_scanner.l

@@ -155,7 +155,7 @@ UPLOAD_MANIFEST		{ return K_UPLOAD_MANIFEST; }
 {hexdigit}+\/{hexdigit}+		{
 					uint32	hi,
 							lo;
-					if (sscanf(yytext, "%X/%X", &hi, &lo) != 2)
+					if (sscanf(yytext, "%X/%08X", &hi, &lo) != 2)
 						replication_yyerror(NULL, yyscanner, "invalid streaming start location");
 					yylval->recptr = ((uint64) hi) << 32 | lo;
 					return RECPTR;

src/backend/replication/slot.c

@@ -1591,8 +1591,8 @@ ReportSlotInvalidation(ReplicationSlotInvalidationCause cause,
 				uint64		ex = oldestLSN - restart_lsn;
 
 				appendStringInfo(&err_detail,
-								 ngettext("The slot's restart_lsn %X/%X exceeds the limit by %" PRIu64 " byte.",
+								 ngettext("The slot's restart_lsn %X/%08X exceeds the limit by %" PRIu64 " byte.",
-										  "The slot's restart_lsn %X/%X exceeds the limit by %" PRIu64 " bytes.",
+										  "The slot's restart_lsn %X/%08X exceeds the limit by %" PRIu64 " bytes.",
 										  ex),
 								 LSN_FORMAT_ARGS(restart_lsn),
 								 ex);

src/backend/replication/slotfuncs.c

@@ -566,7 +566,7 @@ pg_replication_slot_advance(PG_FUNCTION_ARGS)
 	if (moveto < minlsn)
 		ereport(ERROR,
 				(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
-				 errmsg("cannot advance replication slot to %X/%X, minimum is %X/%X",
+				 errmsg("cannot advance replication slot to %X/%08X, minimum is %X/%08X",
 						LSN_FORMAT_ARGS(moveto), LSN_FORMAT_ARGS(minlsn))));
 
 	/* Do the actual slot update, depending on the slot type */

src/backend/replication/syncrep.c

@@ -258,7 +258,7 @@ SyncRepWaitForLSN(XLogRecPtr lsn, bool commit)
 	{
 		char		buffer[32];
 
-		sprintf(buffer, "waiting for %X/%X", LSN_FORMAT_ARGS(lsn));
+		sprintf(buffer, "waiting for %X/%08X", LSN_FORMAT_ARGS(lsn));
 		set_ps_display_suffix(buffer);
 	}
 
@@ -566,7 +566,7 @@ SyncRepReleaseWaiters(void)
 
 	LWLockRelease(SyncRepLock);
 
-	elog(DEBUG3, "released %d procs up to write %X/%X, %d procs up to flush %X/%X, %d procs up to apply %X/%X",
+	elog(DEBUG3, "released %d procs up to write %X/%08X, %d procs up to flush %X/%08X, %d procs up to apply %X/%08X",
 		 numwrite, LSN_FORMAT_ARGS(writePtr),
 		 numflush, LSN_FORMAT_ARGS(flushPtr),
 		 numapply, LSN_FORMAT_ARGS(applyPtr));

src/backend/replication/walreceiver.c

@@ -386,12 +386,12 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 		{
 			if (first_stream)
 				ereport(LOG,
-						(errmsg("started streaming WAL from primary at %X/%X on timeline %u",
+						errmsg("started streaming WAL from primary at %X/%08X on timeline %u",
-								LSN_FORMAT_ARGS(startpoint), startpointTLI)));
+							   LSN_FORMAT_ARGS(startpoint), startpointTLI));
 			else
 				ereport(LOG,
-						(errmsg("restarted WAL streaming at %X/%X on timeline %u",
+						errmsg("restarted WAL streaming at %X/%08X on timeline %u",
-								LSN_FORMAT_ARGS(startpoint), startpointTLI)));
+							   LSN_FORMAT_ARGS(startpoint), startpointTLI));
 			first_stream = false;
 
 			/* Initialize LogstreamResult and buffers for processing messages */
@@ -470,7 +470,7 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 						{
 							ereport(LOG,
 									(errmsg("replication terminated by primary server"),
-									 errdetail("End of WAL reached on timeline %u at %X/%X.",
+									 errdetail("End of WAL reached on timeline %u at %X/%08X.",
 											   startpointTLI,
 											   LSN_FORMAT_ARGS(LogstreamResult.Write))));
 							endofwal = true;
@@ -711,7 +711,7 @@ WalRcvWaitForStartPosition(XLogRecPtr *startpoint, TimeLineID *startpointTLI)
 	{
 		char		activitymsg[50];
 
-		snprintf(activitymsg, sizeof(activitymsg), "restarting at %X/%X",
+		snprintf(activitymsg, sizeof(activitymsg), "restarting at %X/%08X",
 				 LSN_FORMAT_ARGS(*startpoint));
 		set_ps_display(activitymsg);
 	}
@@ -1014,7 +1014,7 @@ XLogWalRcvFlush(bool dying, TimeLineID tli)
 		{
 			char		activitymsg[50];
 
-			snprintf(activitymsg, sizeof(activitymsg), "streaming %X/%X",
+			snprintf(activitymsg, sizeof(activitymsg), "streaming %X/%08X",
 					 LSN_FORMAT_ARGS(LogstreamResult.Write));
 			set_ps_display(activitymsg);
 		}
@@ -1138,7 +1138,7 @@ XLogWalRcvSendReply(bool force, bool requestReply)
 	pq_sendbyte(&reply_message, requestReply ? 1 : 0);
 
 	/* Send it */
-	elog(DEBUG2, "sending write %X/%X flush %X/%X apply %X/%X%s",
+	elog(DEBUG2, "sending write %X/%08X flush %X/%08X apply %X/%08X%s",
 		 LSN_FORMAT_ARGS(writePtr),
 		 LSN_FORMAT_ARGS(flushPtr),
 		 LSN_FORMAT_ARGS(applyPtr),

src/backend/replication/walsender.c

@@ -408,7 +408,7 @@ IdentifySystem(void)
 	else
 		logptr = GetFlushRecPtr(&currTLI);
 
-	snprintf(xloc, sizeof(xloc), "%X/%X", LSN_FORMAT_ARGS(logptr));
+	snprintf(xloc, sizeof(xloc), "%X/%08X", LSN_FORMAT_ARGS(logptr));
 
 	if (MyDatabaseId != InvalidOid)
 	{
@@ -515,7 +515,7 @@ ReadReplicationSlot(ReadReplicationSlotCmd *cmd)
 		{
 			char		xloc[64];
 
-			snprintf(xloc, sizeof(xloc), "%X/%X",
+			snprintf(xloc, sizeof(xloc), "%X/%08X",
 					 LSN_FORMAT_ARGS(slot_contents.data.restart_lsn));
 			values[i] = CStringGetTextDatum(xloc);
 			nulls[i] = false;
@@ -892,12 +892,12 @@ StartReplication(StartReplicationCmd *cmd)
 				switchpoint < cmd->startpoint)
 			{
 				ereport(ERROR,
-						(errmsg("requested starting point %X/%X on timeline %u is not in this server's history",
+						errmsg("requested starting point %X/%08X on timeline %u is not in this server's history",
 							   LSN_FORMAT_ARGS(cmd->startpoint),
 							   cmd->timeline),
-						 errdetail("This server's history forked from timeline %u at %X/%X.",
+						errdetail("This server's history forked from timeline %u at %X/%08X.",
 								  cmd->timeline,
-								   LSN_FORMAT_ARGS(switchpoint))));
+								  LSN_FORMAT_ARGS(switchpoint)));
 			}
 			sendTimeLineValidUpto = switchpoint;
 		}
@@ -939,9 +939,9 @@ StartReplication(StartReplicationCmd *cmd)
 		if (FlushPtr < cmd->startpoint)
 		{
 			ereport(ERROR,
-					(errmsg("requested starting point %X/%X is ahead of the WAL flush position of this server %X/%X",
+					errmsg("requested starting point %X/%08X is ahead of the WAL flush position of this server %X/%08X",
 						   LSN_FORMAT_ARGS(cmd->startpoint),
-							LSN_FORMAT_ARGS(FlushPtr))));
+						   LSN_FORMAT_ARGS(FlushPtr)));
 		}
 
 		/* Start streaming from the requested point */
@@ -983,7 +983,7 @@ StartReplication(StartReplicationCmd *cmd)
 		Datum		values[2];
 		bool		nulls[2] = {0};
 
-		snprintf(startpos_str, sizeof(startpos_str), "%X/%X",
+		snprintf(startpos_str, sizeof(startpos_str), "%X/%08X",
 				 LSN_FORMAT_ARGS(sendTimeLineValidUpto));
 
 		dest = CreateDestReceiver(DestRemoteSimple);
@@ -1324,7 +1324,7 @@ CreateReplicationSlot(CreateReplicationSlotCmd *cmd)
 			ReplicationSlotPersist();
 	}
 
-	snprintf(xloc, sizeof(xloc), "%X/%X",
+	snprintf(xloc, sizeof(xloc), "%X/%08X",
 			 LSN_FORMAT_ARGS(MyReplicationSlot->data.confirmed_flush));
 
 	dest = CreateDestReceiver(DestRemoteSimple);
@@ -2429,7 +2429,7 @@ ProcessStandbyReplyMessage(void)
 		/* Copy because timestamptz_to_str returns a static buffer */
 		replyTimeStr = pstrdup(timestamptz_to_str(replyTime));
 
-		elog(DEBUG2, "write %X/%X flush %X/%X apply %X/%X%s reply_time %s",
+		elog(DEBUG2, "write %X/%08X flush %X/%08X apply %X/%08X%s reply_time %s",
 			 LSN_FORMAT_ARGS(writePtr),
 			 LSN_FORMAT_ARGS(flushPtr),
 			 LSN_FORMAT_ARGS(applyPtr),
@@ -3251,7 +3251,7 @@ XLogSendPhysical(void)
 
 		WalSndCaughtUp = true;
 
-		elog(DEBUG1, "walsender reached end of timeline at %X/%X (sent up to %X/%X)",
+		elog(DEBUG1, "walsender reached end of timeline at %X/%08X (sent up to %X/%08X)",
 			 LSN_FORMAT_ARGS(sendTimeLineValidUpto),
 			 LSN_FORMAT_ARGS(sentPtr));
 		return;
@@ -3392,7 +3392,7 @@ retry:
 	{
 		char		activitymsg[50];
 
-		snprintf(activitymsg, sizeof(activitymsg), "streaming %X/%X",
+		snprintf(activitymsg, sizeof(activitymsg), "streaming %X/%08X",
 				 LSN_FORMAT_ARGS(sentPtr));
 		set_ps_display(activitymsg);
 	}

src/backend/storage/ipc/standby.c

@@ -1376,7 +1376,7 @@ LogCurrentRunningXacts(RunningTransactions CurrRunningXacts)
 
 	if (xlrec.subxid_overflow)
 		elog(DEBUG2,
-			 "snapshot of %d running transactions overflowed (lsn %X/%X oldest xid %u latest complete %u next xid %u)",
+			 "snapshot of %d running transactions overflowed (lsn %X/%08X oldest xid %u latest complete %u next xid %u)",
 			 CurrRunningXacts->xcnt,
 			 LSN_FORMAT_ARGS(recptr),
 			 CurrRunningXacts->oldestRunningXid,
@@ -1384,7 +1384,7 @@ LogCurrentRunningXacts(RunningTransactions CurrRunningXacts)
 			 CurrRunningXacts->nextXid);
 	else
 		elog(DEBUG2,
-			 "snapshot of %d+%d running transaction ids (lsn %X/%X oldest xid %u latest complete %u next xid %u)",
+			 "snapshot of %d+%d running transaction ids (lsn %X/%08X oldest xid %u latest complete %u next xid %u)",
 			 CurrRunningXacts->xcnt, CurrRunningXacts->subxcnt,
 			 LSN_FORMAT_ARGS(recptr),
 			 CurrRunningXacts->oldestRunningXid,

src/backend/utils/adt/pg_lsn.c

@@ -83,7 +83,7 @@ pg_lsn_out(PG_FUNCTION_ARGS)
 	char		buf[MAXPG_LSNLEN + 1];
 	char	   *result;
 
-	snprintf(buf, sizeof buf, "%X/%X", LSN_FORMAT_ARGS(lsn));
+	snprintf(buf, sizeof buf, "%X/%08X", LSN_FORMAT_ARGS(lsn));
 	result = pstrdup(buf);
 	PG_RETURN_CSTRING(result);
 }

src/bin/pg_basebackup/pg_basebackup.c

@@ -487,7 +487,7 @@ reached_end_position(XLogRecPtr segendpos, uint32 timeline,
 			if (r < 0)
 				pg_fatal("could not read from ready pipe: %m");
 
-			if (sscanf(xlogend, "%X/%X", &hi, &lo) != 2)
+			if (sscanf(xlogend, "%X/%08X", &hi, &lo) != 2)
 				pg_fatal("could not parse write-ahead log location \"%s\"",
 						 xlogend);
 			xlogendptr = ((uint64) hi) << 32 | lo;
@@ -629,7 +629,7 @@ StartLogStreamer(char *startpos, uint32 timeline, char *sysidentifier,
 	param->wal_compress_level = wal_compress_level;
 
 	/* Convert the starting position */
-	if (sscanf(startpos, "%X/%X", &hi, &lo) != 2)
+	if (sscanf(startpos, "%X/%08X", &hi, &lo) != 2)
 		pg_fatal("could not parse write-ahead log location \"%s\"",
 				 startpos);
 	param->startptr = ((uint64) hi) << 32 | lo;
@@ -2255,7 +2255,7 @@ BaseBackup(char *compression_algorithm, char *compression_detail,
 		 * value directly in the variable, and then set the flag that says
 		 * it's there.
 		 */
-		if (sscanf(xlogend, "%X/%X", &hi, &lo) != 2)
+		if (sscanf(xlogend, "%X/%08X", &hi, &lo) != 2)
 			pg_fatal("could not parse write-ahead log location \"%s\"",
 					 xlogend);
 		xlogendptr = ((uint64) hi) << 32 | lo;

src/bin/pg_basebackup/pg_createsubscriber.c

@@ -1262,7 +1262,7 @@ setup_recovery(const struct LogicalRepInfo *dbinfo, const char *datadir, const c
 	{
 		appendPQExpBufferStr(recoveryconfcontents, "# dry run mode");
 		appendPQExpBuffer(recoveryconfcontents,
-						  "recovery_target_lsn = '%X/%X'\n",
+						  "recovery_target_lsn = '%X/%08X'\n",
 						  LSN_FORMAT_ARGS((XLogRecPtr) InvalidXLogRecPtr));
 	}
 	else
@@ -1876,7 +1876,7 @@ set_replication_progress(PGconn *conn, const struct LogicalRepInfo *dbinfo, cons
 	if (dry_run)
 	{
 		suboid = InvalidOid;
-		lsnstr = psprintf("%X/%X", LSN_FORMAT_ARGS((XLogRecPtr) InvalidXLogRecPtr));
+		lsnstr = psprintf("%X/%08X", LSN_FORMAT_ARGS((XLogRecPtr) InvalidXLogRecPtr));
 	}
 	else
 	{

src/bin/pg_basebackup/pg_receivewal.c

@@ -188,14 +188,14 @@ stop_streaming(XLogRecPtr xlogpos, uint32 timeline, bool segment_finished)
 
 	/* we assume that we get called once at the end of each segment */
 	if (verbose && segment_finished)
-		pg_log_info("finished segment at %X/%X (timeline %u)",
+		pg_log_info("finished segment at %X/%08X (timeline %u)",
 					LSN_FORMAT_ARGS(xlogpos),
 					timeline);
 
 	if (!XLogRecPtrIsInvalid(endpos) && endpos < xlogpos)
 	{
 		if (verbose)
-			pg_log_info("stopped log streaming at %X/%X (timeline %u)",
+			pg_log_info("stopped log streaming at %X/%08X (timeline %u)",
 						LSN_FORMAT_ARGS(xlogpos),
 						timeline);
 		time_to_stop = true;
@@ -211,7 +211,7 @@ stop_streaming(XLogRecPtr xlogpos, uint32 timeline, bool segment_finished)
 	 * timeline, but it's close enough for reporting purposes.
 	 */
 	if (verbose && prevtimeline != 0 && prevtimeline != timeline)
-		pg_log_info("switched to timeline %u at %X/%X",
+		pg_log_info("switched to timeline %u at %X/%08X",
 					timeline,
 					LSN_FORMAT_ARGS(prevpos));
 
@@ -575,7 +575,7 @@ StreamLog(void)
 	 * Start the replication
 	 */
 	if (verbose)
-		pg_log_info("starting log streaming at %X/%X (timeline %u)",
+		pg_log_info("starting log streaming at %X/%08X (timeline %u)",
 					LSN_FORMAT_ARGS(stream.startpos),
 					stream.timeline);
 
@@ -689,7 +689,7 @@ main(int argc, char **argv)
 				basedir = pg_strdup(optarg);
 				break;
 			case 'E':
-				if (sscanf(optarg, "%X/%X", &hi, &lo) != 2)
+				if (sscanf(optarg, "%X/%08X", &hi, &lo) != 2)
 					pg_fatal("could not parse end position \"%s\"", optarg);
 				endpos = ((uint64) hi) << 32 | lo;
 				break;

src/bin/pg_basebackup/pg_recvlogical.c

@@ -144,7 +144,7 @@ sendFeedback(PGconn *conn, TimestampTz now, bool force, bool replyRequested)
 		return true;
 
 	if (verbose)
-		pg_log_info("confirming write up to %X/%X, flush to %X/%X (slot %s)",
+		pg_log_info("confirming write up to %X/%08X, flush to %X/%08X (slot %s)",
 					LSN_FORMAT_ARGS(output_written_lsn),
 					LSN_FORMAT_ARGS(output_fsync_lsn),
 					replication_slot);
@@ -238,13 +238,13 @@ StreamLogicalLog(void)
 	 * Start the replication
 	 */
 	if (verbose)
-		pg_log_info("starting log streaming at %X/%X (slot %s)",
+		pg_log_info("starting log streaming at %X/%08X (slot %s)",
 					LSN_FORMAT_ARGS(startpos),
 					replication_slot);
 
 	/* Initiate the replication stream at specified location */
 	query = createPQExpBuffer();
-	appendPQExpBuffer(query, "START_REPLICATION SLOT \"%s\" LOGICAL %X/%X",
+	appendPQExpBuffer(query, "START_REPLICATION SLOT \"%s\" LOGICAL %X/%08X",
 					  replication_slot, LSN_FORMAT_ARGS(startpos));
 
 	/* print options if there are any */
@@ -800,12 +800,12 @@ main(int argc, char **argv)
 				break;
 /* replication options */
 			case 'I':
-				if (sscanf(optarg, "%X/%X", &hi, &lo) != 2)
+				if (sscanf(optarg, "%X/%08X", &hi, &lo) != 2)
 					pg_fatal("could not parse start position \"%s\"", optarg);
 				startpos = ((uint64) hi) << 32 | lo;
 				break;
 			case 'E':
-				if (sscanf(optarg, "%X/%X", &hi, &lo) != 2)
+				if (sscanf(optarg, "%X/%08X", &hi, &lo) != 2)
 					pg_fatal("could not parse end position \"%s\"", optarg);
 				endpos = ((uint64) hi) << 32 | lo;
 				break;
@@ -1075,12 +1075,12 @@ prepareToTerminate(PGconn *conn, XLogRecPtr endpos, StreamStopReason reason,
 				pg_log_info("received interrupt signal, exiting");
 				break;
 			case STREAM_STOP_KEEPALIVE:
-				pg_log_info("end position %X/%X reached by keepalive",
+				pg_log_info("end position %X/%08X reached by keepalive",
 							LSN_FORMAT_ARGS(endpos));
 				break;
 			case STREAM_STOP_END_OF_WAL:
 				Assert(!XLogRecPtrIsInvalid(lsn));
-				pg_log_info("end position %X/%X reached by WAL record at %X/%X",
+				pg_log_info("end position %X/%08X reached by WAL record at %X/%08X",
 							LSN_FORMAT_ARGS(endpos), LSN_FORMAT_ARGS(lsn));
 				break;
 			case STREAM_STOP_NONE:

src/bin/pg_basebackup/receivelog.c

@@ -571,7 +571,7 @@ ReceiveXlogStream(PGconn *conn, StreamCtl *stream)
 			return true;
 
 		/* Initiate the replication stream at specified location */
-		snprintf(query, sizeof(query), "START_REPLICATION %s%X/%X TIMELINE %u",
+		snprintf(query, sizeof(query), "START_REPLICATION %s%X/%08X TIMELINE %u",
 				 slotcmd,
 				 LSN_FORMAT_ARGS(stream->startpos),
 				 stream->timeline);
@@ -628,7 +628,7 @@ ReceiveXlogStream(PGconn *conn, StreamCtl *stream)
 			}
 			if (stream->startpos > stoppos)
 			{
-				pg_log_error("server stopped streaming timeline %u at %X/%X, but reported next timeline %u to begin at %X/%X",
+				pg_log_error("server stopped streaming timeline %u at %X/%08X, but reported next timeline %u to begin at %X/%08X",
 							 stream->timeline, LSN_FORMAT_ARGS(stoppos),
 							 newtimeline, LSN_FORMAT_ARGS(stream->startpos));
 				goto error;
@@ -720,7 +720,7 @@ ReadEndOfStreamingResult(PGresult *res, XLogRecPtr *startpos, uint32 *timeline)
 	}
 
 	*timeline = atoi(PQgetvalue(res, 0, 0));
-	if (sscanf(PQgetvalue(res, 0, 1), "%X/%X", &startpos_xlogid,
+	if (sscanf(PQgetvalue(res, 0, 1), "%X/%08X", &startpos_xlogid,
 			   &startpos_xrecoff) != 2)
 	{
 		pg_log_error("could not parse next timeline's starting point \"%s\"",

src/bin/pg_basebackup/streamutil.c

@@ -445,7 +445,7 @@ RunIdentifySystem(PGconn *conn, char **sysid, TimeLineID *starttli,
 	/* Get LSN start position if necessary */
 	if (startpos != NULL)
 	{
-		if (sscanf(PQgetvalue(res, 0, 2), "%X/%X", &hi, &lo) != 2)
+		if (sscanf(PQgetvalue(res, 0, 2), "%X/%08X", &hi, &lo) != 2)
 		{
 			pg_log_error("could not parse write-ahead log location \"%s\"",
 						 PQgetvalue(res, 0, 2));
@@ -551,7 +551,7 @@ GetSlotInformation(PGconn *conn, const char *slot_name,
 		uint32		hi,
 					lo;
 
-		if (sscanf(PQgetvalue(res, 0, 1), "%X/%X", &hi, &lo) != 2)
+		if (sscanf(PQgetvalue(res, 0, 1), "%X/%08X", &hi, &lo) != 2)
 		{
 			pg_log_error("could not parse restart_lsn \"%s\" for replication slot \"%s\"",
 						 PQgetvalue(res, 0, 1), slot_name);

src/bin/pg_combinebackup/backup_label.c

@@ -247,7 +247,7 @@ parse_lsn(char *s, char *e, XLogRecPtr *lsn, char **c)
 	unsigned	lo;
 
 	*e = '\0';
-	success = (sscanf(s, "%X/%X%n", &hi, &lo, &nchars) == 2);
+	success = (sscanf(s, "%X/%08X%n", &hi, &lo, &nchars) == 2);
 	*e = save;
 
 	if (success)

src/bin/pg_combinebackup/pg_combinebackup.c

@@ -569,7 +569,7 @@ check_backup_label_files(int n_backups, char **backup_dirs)
 			pg_fatal("backup at \"%s\" starts on timeline %u, but expected %u",
 					 backup_dirs[i], start_tli, check_tli);
 		if (i < n_backups - 1 && start_lsn != check_lsn)
-			pg_fatal("backup at \"%s\" starts at LSN %X/%X, but expected %X/%X",
+			pg_fatal("backup at \"%s\" starts at LSN %X/%08X, but expected %X/%08X",
 					 backup_dirs[i],
 					 LSN_FORMAT_ARGS(start_lsn),
 					 LSN_FORMAT_ARGS(check_lsn));

src/bin/pg_combinebackup/write_manifest.c

@@ -155,7 +155,7 @@ finalize_manifest(manifest_writer *mwriter,
 	for (wal_range = first_wal_range; wal_range != NULL;
 		 wal_range = wal_range->next)
 		appendStringInfo(&mwriter->buf,
-						 "%s{ \"Timeline\": %u, \"Start-LSN\": \"%X/%X\", \"End-LSN\": \"%X/%X\" }",
+						 "%s{ \"Timeline\": %u, \"Start-LSN\": \"%X/%08X\", \"End-LSN\": \"%X/%08X\" }",
 						 wal_range == first_wal_range ? "" : ",\n",
 						 wal_range->tli,
 						 LSN_FORMAT_ARGS(wal_range->start_lsn),

src/bin/pg_controldata/pg_controldata.c

@@ -245,9 +245,9 @@ main(int argc, char *argv[])
 		   dbState(ControlFile->state));
 	printf(_("pg_control last modified:             %s\n"),
 		   pgctime_str);
-	printf(_("Latest checkpoint location:           %X/%X\n"),
+	printf(_("Latest checkpoint location:           %X/%08X\n"),
 		   LSN_FORMAT_ARGS(ControlFile->checkPoint));
-	printf(_("Latest checkpoint's REDO location:    %X/%X\n"),
+	printf(_("Latest checkpoint's REDO location:    %X/%08X\n"),
 		   LSN_FORMAT_ARGS(ControlFile->checkPointCopy.redo));
 	printf(_("Latest checkpoint's REDO WAL file:    %s\n"),
 		   xlogfilename);
@@ -282,15 +282,15 @@ main(int argc, char *argv[])
 		   ControlFile->checkPointCopy.newestCommitTsXid);
 	printf(_("Time of latest checkpoint:            %s\n"),
 		   ckpttime_str);
-	printf(_("Fake LSN counter for unlogged rels:   %X/%X\n"),
+	printf(_("Fake LSN counter for unlogged rels:   %X/%08X\n"),
 		   LSN_FORMAT_ARGS(ControlFile->unloggedLSN));
-	printf(_("Minimum recovery ending location:     %X/%X\n"),
+	printf(_("Minimum recovery ending location:     %X/%08X\n"),
 		   LSN_FORMAT_ARGS(ControlFile->minRecoveryPoint));
 	printf(_("Min recovery ending loc's timeline:   %u\n"),
 		   ControlFile->minRecoveryPointTLI);
-	printf(_("Backup start location:                %X/%X\n"),
+	printf(_("Backup start location:                %X/%08X\n"),
 		   LSN_FORMAT_ARGS(ControlFile->backupStartPoint));
-	printf(_("Backup end location:                  %X/%X\n"),
+	printf(_("Backup end location:                  %X/%08X\n"),
 		   LSN_FORMAT_ARGS(ControlFile->backupEndPoint));
 	printf(_("End-of-backup record required:        %s\n"),
 		   ControlFile->backupEndRequired ? _("yes") : _("no"));

src/bin/pg_rewind/libpq_source.c

@@ -215,7 +215,7 @@ libpq_get_current_wal_insert_lsn(rewind_source *source)
 
 	val = run_simple_query(conn, "SELECT pg_current_wal_insert_lsn()");
 
-	if (sscanf(val, "%X/%X", &hi, &lo) != 2)
+	if (sscanf(val, "%X/%08X", &hi, &lo) != 2)
 		pg_fatal("unrecognized result \"%s\" for current WAL insert location", val);
 
 	result = ((uint64) hi) << 32 | lo;

src/bin/pg_rewind/parsexlog.c

@@ -89,11 +89,11 @@ extractPageMap(const char *datadir, XLogRecPtr startpoint, int tliIndex,
 			XLogRecPtr	errptr = xlogreader->EndRecPtr;
 
 			if (errormsg)
-				pg_fatal("could not read WAL record at %X/%X: %s",
+				pg_fatal("could not read WAL record at %X/%08X: %s",
 						 LSN_FORMAT_ARGS(errptr),
 						 errormsg);
 			else
-				pg_fatal("could not read WAL record at %X/%X",
+				pg_fatal("could not read WAL record at %X/%08X",
 						 LSN_FORMAT_ARGS(errptr));
 		}
 
@@ -105,7 +105,7 @@ extractPageMap(const char *datadir, XLogRecPtr startpoint, int tliIndex,
 	 * messed up.
 	 */
 	if (xlogreader->EndRecPtr != endpoint)
-		pg_fatal("end pointer %X/%X is not a valid end point; expected %X/%X",
+		pg_fatal("end pointer %X/%08X is not a valid end point; expected %X/%08X",
 				 LSN_FORMAT_ARGS(endpoint), LSN_FORMAT_ARGS(xlogreader->EndRecPtr));
 
 	XLogReaderFree(xlogreader);
@@ -143,10 +143,10 @@ readOneRecord(const char *datadir, XLogRecPtr ptr, int tliIndex,
 	if (record == NULL)
 	{
 		if (errormsg)
-			pg_fatal("could not read WAL record at %X/%X: %s",
+			pg_fatal("could not read WAL record at %X/%08X: %s",
 					 LSN_FORMAT_ARGS(ptr), errormsg);
 		else
-			pg_fatal("could not read WAL record at %X/%X",
+			pg_fatal("could not read WAL record at %X/%08X",
 					 LSN_FORMAT_ARGS(ptr));
 	}
 	endptr = xlogreader->EndRecPtr;
@@ -211,11 +211,11 @@ findLastCheckpoint(const char *datadir, XLogRecPtr forkptr, int tliIndex,
 		if (record == NULL)
 		{
 			if (errormsg)
-				pg_fatal("could not find previous WAL record at %X/%X: %s",
+				pg_fatal("could not find previous WAL record at %X/%08X: %s",
 						 LSN_FORMAT_ARGS(searchptr),
 						 errormsg);
 			else
-				pg_fatal("could not find previous WAL record at %X/%X",
+				pg_fatal("could not find previous WAL record at %X/%08X",
 						 LSN_FORMAT_ARGS(searchptr));
 		}
 
@@ -458,8 +458,8 @@ extractPageInfo(XLogReaderState *record)
 		 * we don't recognize the type. That's bad - we don't know how to
 		 * track that change.
 		 */
-		pg_fatal("WAL record modifies a relation, but record type is not recognized: "
+		pg_fatal("WAL record modifies a relation, but record type is not recognized:\n"
-				 "lsn: %X/%X, rmid: %d, rmgr: %s, info: %02X",
+				 "lsn: %X/%08X, rmid: %d, rmgr: %s, info: %02X",
 				 LSN_FORMAT_ARGS(record->ReadRecPtr),
 				 rmid, RmgrName(rmid), info);
 	}

src/bin/pg_rewind/pg_rewind.c

@@ -393,7 +393,7 @@ main(int argc, char **argv)
 								   targetHistory, targetNentries,
 								   &divergerec, &lastcommontliIndex);
 
-		pg_log_info("servers diverged at WAL location %X/%X on timeline %u",
+		pg_log_info("servers diverged at WAL location %X/%08X on timeline %u",
 					LSN_FORMAT_ARGS(divergerec),
 					targetHistory[lastcommontliIndex].tli);
 
@@ -461,7 +461,7 @@ main(int argc, char **argv)
 
 	findLastCheckpoint(datadir_target, divergerec, lastcommontliIndex,
 					   &chkptrec, &chkpttli, &chkptredo, restore_command);
-	pg_log_info("rewinding from last common checkpoint at %X/%X on timeline %u",
+	pg_log_info("rewinding from last common checkpoint at %X/%08X on timeline %u",
 				LSN_FORMAT_ARGS(chkptrec), chkpttli);
 
 	/* Initialize the hash table to track the status of each file */
@@ -902,7 +902,7 @@ getTimelineHistory(TimeLineID tli, bool is_source, int *nentries)
 			TimeLineHistoryEntry *entry;
 
 			entry = &history[i];
-			pg_log_debug("%u: %X/%X - %X/%X", entry->tli,
+			pg_log_debug("%u: %X/%08X - %X/%08X", entry->tli,
 						 LSN_FORMAT_ARGS(entry->begin),
 						 LSN_FORMAT_ARGS(entry->end));
 		}
@@ -981,8 +981,8 @@ createBackupLabel(XLogRecPtr startpoint, TimeLineID starttli, XLogRecPtr checkpo
 	strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", tmp);
 
 	len = snprintf(buf, sizeof(buf),
-				   "START WAL LOCATION: %X/%X (file %s)\n"
+				   "START WAL LOCATION: %X/%08X (file %s)\n"
-				   "CHECKPOINT LOCATION: %X/%X\n"
+				   "CHECKPOINT LOCATION: %X/%08X\n"
 				   "BACKUP METHOD: pg_rewind\n"
 				   "BACKUP FROM: standby\n"
 				   "START TIME: %s\n",

src/bin/pg_rewind/timeline.c

@@ -66,7 +66,7 @@ rewind_parseTimeLineHistory(char *buffer, TimeLineID targetTLI, int *nentries)
 		if (*ptr == '\0' || *ptr == '#')
 			continue;
 
-		nfields = sscanf(fline, "%u\t%X/%X", &tli, &switchpoint_hi, &switchpoint_lo);
+		nfields = sscanf(fline, "%u\t%X/%08X", &tli, &switchpoint_hi, &switchpoint_lo);
 
 		if (nfields < 1)
 		{

src/bin/pg_verifybackup/pg_verifybackup.c

@@ -1207,7 +1207,7 @@ parse_required_wal(verifier_context *context, char *pg_waldump_path,
 	{
 		char	   *pg_waldump_cmd;
 
-		pg_waldump_cmd = psprintf("\"%s\" --quiet --path=\"%s\" --timeline=%u --start=%X/%X --end=%X/%X\n",
+		pg_waldump_cmd = psprintf("\"%s\" --quiet --path=\"%s\" --timeline=%u --start=%X/%08X --end=%X/%08X\n",
 								  pg_waldump_path, wal_directory, this_wal_range->tli,
 								  LSN_FORMAT_ARGS(this_wal_range->start_lsn),
 								  LSN_FORMAT_ARGS(this_wal_range->end_lsn));

src/bin/pg_waldump/pg_waldump.c

@@ -656,7 +656,7 @@ XLogDumpDisplayStats(XLogDumpConfig *config, XLogStats *stats)
 	}
 	total_len = total_rec_len + total_fpi_len;
 
-	printf("WAL statistics between %X/%X and %X/%X:\n",
+	printf("WAL statistics between %X/%08X and %X/%08X:\n",
 		   LSN_FORMAT_ARGS(stats->startptr), LSN_FORMAT_ARGS(stats->endptr));
 
 	/*
@@ -904,7 +904,7 @@ main(int argc, char **argv)
 				config.filter_by_extended = true;
 				break;
 			case 'e':
-				if (sscanf(optarg, "%X/%X", &xlogid, &xrecoff) != 2)
+				if (sscanf(optarg, "%X/%08X", &xlogid, &xrecoff) != 2)
 				{
 					pg_log_error("invalid WAL location: \"%s\"",
 								 optarg);
@@ -1002,7 +1002,7 @@ main(int argc, char **argv)
 				config.filter_by_extended = true;
 				break;
 			case 's':
-				if (sscanf(optarg, "%X/%X", &xlogid, &xrecoff) != 2)
+				if (sscanf(optarg, "%X/%08X", &xlogid, &xrecoff) != 2)
 				{
 					pg_log_error("invalid WAL location: \"%s\"",
 								 optarg);
@@ -1140,7 +1140,7 @@ main(int argc, char **argv)
 			XLogSegNoOffsetToRecPtr(segno, 0, WalSegSz, private.startptr);
 		else if (!XLByteInSeg(private.startptr, segno, WalSegSz))
 		{
-			pg_log_error("start WAL location %X/%X is not inside file \"%s\"",
+			pg_log_error("start WAL location %X/%08X is not inside file \"%s\"",
 						 LSN_FORMAT_ARGS(private.startptr),
 						 fname);
 			goto bad_argument;
@@ -1182,7 +1182,7 @@ main(int argc, char **argv)
 		if (!XLByteInSeg(private.endptr, segno, WalSegSz) &&
 			private.endptr != (segno + 1) * WalSegSz)
 		{
-			pg_log_error("end WAL location %X/%X is not inside file \"%s\"",
+			pg_log_error("end WAL location %X/%08X is not inside file \"%s\"",
 						 LSN_FORMAT_ARGS(private.endptr),
 						 argv[argc - 1]);
 			goto bad_argument;
@@ -1214,7 +1214,7 @@ main(int argc, char **argv)
 	first_record = XLogFindNextRecord(xlogreader_state, private.startptr);
 
 	if (first_record == InvalidXLogRecPtr)
-		pg_fatal("could not find a valid record after %X/%X",
+		pg_fatal("could not find a valid record after %X/%08X",
 				 LSN_FORMAT_ARGS(private.startptr));
 
 	/*
@@ -1224,8 +1224,8 @@ main(int argc, char **argv)
 	 */
 	if (first_record != private.startptr &&
 		XLogSegmentOffset(private.startptr, WalSegSz) != 0)
-		pg_log_info(ngettext("first record is after %X/%X, at %X/%X, skipping over %u byte",
+		pg_log_info(ngettext("first record is after %X/%08X, at %X/%08X, skipping over %u byte",
-							 "first record is after %X/%X, at %X/%X, skipping over %u bytes",
+							 "first record is after %X/%08X, at %X/%08X, skipping over %u bytes",
 							 (first_record - private.startptr)),
 					LSN_FORMAT_ARGS(private.startptr),
 					LSN_FORMAT_ARGS(first_record),
@@ -1309,7 +1309,7 @@ main(int argc, char **argv)
 		exit(0);
 
 	if (errormsg)
-		pg_fatal("error in WAL record at %X/%X: %s",
+		pg_fatal("error in WAL record at %X/%08X: %s",
 				 LSN_FORMAT_ARGS(xlogreader_state->ReadRecPtr),
 				 errormsg);
 

src/common/parse_manifest.c

@@ -942,7 +942,7 @@ parse_xlogrecptr(XLogRecPtr *result, char *input)
 	uint32		hi;
 	uint32		lo;
 
-	if (sscanf(input, "%X/%X", &hi, &lo) != 2)
+	if (sscanf(input, "%X/%08X", &hi, &lo) != 2)
 		return false;
 	*result = ((uint64) hi) << 32 | lo;
 	return true;

src/include/access/xlogdefs.h

@@ -38,7 +38,10 @@ typedef uint64 XLogRecPtr;
 /*
  * Handy macro for printing XLogRecPtr in conventional format, e.g.,
  *
- * printf("%X/%X", LSN_FORMAT_ARGS(lsn));
+ * printf("%X/08X", LSN_FORMAT_ARGS(lsn));
+ *
+ * To avoid breaking translatable messages, we're directly applying the
+ * LSN format instead of using a macro.
  */
 #define LSN_FORMAT_ARGS(lsn) (AssertVariableIsOfTypeMacro((lsn), XLogRecPtr), (uint32) ((lsn) >> 32)), ((uint32) (lsn))
 

src/test/recovery/t/016_min_consistency.pl

@@ -39,7 +39,7 @@ sub find_largest_lsn
 	defined($len) or die "read error on $filename: $!";
 	close($fh);
 
-	return sprintf("%X/%X", $max_hi, $max_lo);
+	return sprintf("%X/%08X", $max_hi, $max_lo);
 }
 
 # Initialize primary node

src/test/regress/expected/numeric.out

@@ -3873,14 +3873,14 @@ ERROR:  factorial of a negative number is undefined
 --
 SELECT pg_lsn(23783416::numeric);
    pg_lsn   
------------
+------------
- 0/16AE7F8
+ 0/016AE7F8
 (1 row)
 
 SELECT pg_lsn(0::numeric);
    pg_lsn   
---------
+------------
- 0/0
+ 0/00000000
 (1 row)
 
 SELECT pg_lsn(18446744073709551615::numeric);

src/test/regress/expected/pg_lsn.out

@@ -42,8 +42,8 @@ SELECT * FROM pg_input_error_info('16AE7F7', 'pg_lsn');
 -- Min/Max aggregation
 SELECT MIN(f1), MAX(f1) FROM PG_LSN_TBL;
     min     |        max        
------+-------------------
+------------+-------------------
- 0/0 | FFFFFFFF/FFFFFFFF
+ 0/00000000 | FFFFFFFF/FFFFFFFF
 (1 row)
 
 DROP TABLE PG_LSN_TBL;
@@ -86,20 +86,20 @@ SELECT '0/16AE7F8'::pg_lsn - '0/16AE7F7'::pg_lsn;
 
 SELECT '0/16AE7F7'::pg_lsn + 16::numeric;
   ?column?  
------------
+------------
- 0/16AE807
+ 0/016AE807
 (1 row)
 
 SELECT 16::numeric + '0/16AE7F7'::pg_lsn;
   ?column?  
------------
+------------
- 0/16AE807
+ 0/016AE807
 (1 row)
 
 SELECT '0/16AE7F7'::pg_lsn - 16::numeric;
   ?column?  
------------
+------------
- 0/16AE7E7
+ 0/016AE7E7
 (1 row)
 
 SELECT 'FFFFFFFF/FFFFFFFE'::pg_lsn + 1::numeric;
@@ -112,8 +112,8 @@ SELECT 'FFFFFFFF/FFFFFFFE'::pg_lsn + 2::numeric; -- out of range error
 ERROR:  pg_lsn out of range
 SELECT '0/1'::pg_lsn - 1::numeric;
   ?column?  
-----------
+------------
- 0/0
+ 0/00000000
 (1 row)
 
 SELECT '0/1'::pg_lsn - 2::numeric; -- out of range error
@@ -126,8 +126,8 @@ SELECT '0/0'::pg_lsn + ('FFFFFFFF/FFFFFFFF'::pg_lsn - '0/0'::pg_lsn);
 
 SELECT 'FFFFFFFF/FFFFFFFF'::pg_lsn - ('FFFFFFFF/FFFFFFFF'::pg_lsn - '0/0'::pg_lsn);
   ?column?  
-----------
+------------
- 0/0
+ 0/00000000
 (1 row)
 
 SELECT '0/16AE7F7'::pg_lsn + 'NaN'::numeric;
@@ -165,106 +165,106 @@ SELECT DISTINCT (i || '/' || j)::pg_lsn f
   WHERE i <= 10 AND j > 0 AND j <= 10
   ORDER BY f;
       f      
--------
+-------------
- 1/1
+ 1/00000001
- 1/2
+ 1/00000002
- 1/3
+ 1/00000003
- 1/4
+ 1/00000004
- 1/5
+ 1/00000005
- 1/6
+ 1/00000006
- 1/7
+ 1/00000007
- 1/8
+ 1/00000008
- 1/9
+ 1/00000009
- 1/10
+ 1/00000010
- 2/1
+ 2/00000001
- 2/2
+ 2/00000002
- 2/3
+ 2/00000003
- 2/4
+ 2/00000004
- 2/5
+ 2/00000005
- 2/6
+ 2/00000006
- 2/7
+ 2/00000007
- 2/8
+ 2/00000008
- 2/9
+ 2/00000009
- 2/10
+ 2/00000010
- 3/1
+ 3/00000001
- 3/2
+ 3/00000002
- 3/3
+ 3/00000003
- 3/4
+ 3/00000004
- 3/5
+ 3/00000005
- 3/6
+ 3/00000006
- 3/7
+ 3/00000007
- 3/8
+ 3/00000008
- 3/9
+ 3/00000009
- 3/10
+ 3/00000010
- 4/1
+ 4/00000001
- 4/2
+ 4/00000002
- 4/3
+ 4/00000003
- 4/4
+ 4/00000004
- 4/5
+ 4/00000005
- 4/6
+ 4/00000006
- 4/7
+ 4/00000007
- 4/8
+ 4/00000008
- 4/9
+ 4/00000009
- 4/10
+ 4/00000010
- 5/1
+ 5/00000001
- 5/2
+ 5/00000002
- 5/3
+ 5/00000003
- 5/4
+ 5/00000004
- 5/5
+ 5/00000005
- 5/6
+ 5/00000006
- 5/7
+ 5/00000007
- 5/8
+ 5/00000008
- 5/9
+ 5/00000009
- 5/10
+ 5/00000010
- 6/1
+ 6/00000001
- 6/2
+ 6/00000002
- 6/3
+ 6/00000003
- 6/4
+ 6/00000004
- 6/5
+ 6/00000005
- 6/6
+ 6/00000006
- 6/7
+ 6/00000007
- 6/8
+ 6/00000008
- 6/9
+ 6/00000009
- 6/10
+ 6/00000010
- 7/1
+ 7/00000001
- 7/2
+ 7/00000002
- 7/3
+ 7/00000003
- 7/4
+ 7/00000004
- 7/5
+ 7/00000005
- 7/6
+ 7/00000006
- 7/7
+ 7/00000007
- 7/8
+ 7/00000008
- 7/9
+ 7/00000009
- 7/10
+ 7/00000010
- 8/1
+ 8/00000001
- 8/2
+ 8/00000002
- 8/3
+ 8/00000003
- 8/4
+ 8/00000004
- 8/5
+ 8/00000005
- 8/6
+ 8/00000006
- 8/7
+ 8/00000007
- 8/8
+ 8/00000008
- 8/9
+ 8/00000009
- 8/10
+ 8/00000010
- 9/1
+ 9/00000001
- 9/2
+ 9/00000002
- 9/3
+ 9/00000003
- 9/4
+ 9/00000004
- 9/5
+ 9/00000005
- 9/6
+ 9/00000006
- 9/7
+ 9/00000007
- 9/8
+ 9/00000008
- 9/9
+ 9/00000009
- 9/10
+ 9/00000010
- 10/1
+ 10/00000001
- 10/2
+ 10/00000002
- 10/3
+ 10/00000003
- 10/4
+ 10/00000004
- 10/5
+ 10/00000005
- 10/6
+ 10/00000006
- 10/7
+ 10/00000007
- 10/8
+ 10/00000008
- 10/9
+ 10/00000009
- 10/10
+ 10/00000010
 (100 rows)
 

src/test/regress/expected/subscription.out

@@ -118,16 +118,16 @@ HINT:  To initiate replication, you must manually create the replication slot, e
 \dRs+ regress_testsub4
                                                                                                                   List of subscriptions
        Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
-------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub4 | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | none   | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub4 | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | none   | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub4 SET (origin = any);
 \dRs+ regress_testsub4
                                                                                                                   List of subscriptions
        Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
-------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub4 | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub4 | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 DROP SUBSCRIPTION regress_testsub3;
@@ -147,8 +147,8 @@ ERROR:  invalid connection string syntax: missing "=" after "foobar" in connecti
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub SET PUBLICATION testpub2, testpub3 WITH (refresh = false);
@@ -159,8 +159,8 @@ ALTER SUBSCRIPTION regress_testsub SET (run_as_owner = true);
 \dRs+
                                                                                                                       List of subscriptions
       Name       |           Owner           | Enabled |     Publication     | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |           Conninfo           |  Skip LSN  
------------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+------------------------------+----------
+-----------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+------------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub2,testpub3} | f      | parallel  | d                | f                | any    | f                 | t             | f        | off                | dbname=regress_doesnotexist2 | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub2,testpub3} | f      | parallel  | d                | f                | any    | f                 | t             | f        | off                | dbname=regress_doesnotexist2 | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub SET (password_required = true);
@@ -178,8 +178,8 @@ ALTER SUBSCRIPTION regress_testsub SKIP (lsn = '0/12345');
 \dRs+
                                                                                                                       List of subscriptions
       Name       |           Owner           | Enabled |     Publication     | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |           Conninfo           |  Skip LSN  
------------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+------------------------------+----------
+-----------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+------------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub2,testpub3} | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist2 | 0/12345
+ regress_testsub | regress_subscription_user | f       | {testpub2,testpub3} | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist2 | 0/00012345
 (1 row)
 
 -- ok - with lsn = NONE
@@ -190,8 +190,8 @@ ERROR:  invalid WAL location (LSN): 0/0
 \dRs+
                                                                                                                       List of subscriptions
       Name       |           Owner           | Enabled |     Publication     | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |           Conninfo           |  Skip LSN  
------------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+------------------------------+----------
+-----------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+------------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub2,testpub3} | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist2 | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub2,testpub3} | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist2 | 0/00000000
 (1 row)
 
 BEGIN;
@@ -225,8 +225,8 @@ HINT:  Available values: local, remote_write, remote_apply, on, off.
 \dRs+
                                                                                                                         List of subscriptions
         Name         |           Owner           | Enabled |     Publication     | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |           Conninfo           |  Skip LSN  
----------------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+------------------------------+----------
+---------------------+---------------------------+---------+---------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+------------------------------+------------
- regress_testsub_foo | regress_subscription_user | f       | {testpub2,testpub3} | f      | parallel  | d                | f                | any    | t                 | f             | f        | local              | dbname=regress_doesnotexist2 | 0/0
+ regress_testsub_foo | regress_subscription_user | f       | {testpub2,testpub3} | f      | parallel  | d                | f                | any    | t                 | f             | f        | local              | dbname=regress_doesnotexist2 | 0/00000000
 (1 row)
 
 -- rename back to keep the rest simple
@@ -257,8 +257,8 @@ HINT:  To initiate replication, you must manually create the replication slot, e
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | t      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | t      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub SET (binary = false);
@@ -266,8 +266,8 @@ ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE);
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 DROP SUBSCRIPTION regress_testsub;
@@ -281,16 +281,16 @@ HINT:  To initiate replication, you must manually create the replication slot, e
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | on        | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | on        | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub SET (streaming = parallel);
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub SET (streaming = false);
@@ -298,8 +298,8 @@ ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE);
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | off       | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | off       | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 -- fail - publication already exists
@@ -316,8 +316,8 @@ ERROR:  publication "testpub1" is already in subscription "regress_testsub"
 \dRs+
                                                                                                                          List of subscriptions
       Name       |           Owner           | Enabled |         Publication         | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-----------------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-----------------------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub,testpub1,testpub2} | f      | off       | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub,testpub1,testpub2} | f      | off       | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 -- fail - publication used more than once
@@ -334,8 +334,8 @@ ALTER SUBSCRIPTION regress_testsub DROP PUBLICATION testpub1, testpub2 WITH (ref
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | off       | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | off       | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 DROP SUBSCRIPTION regress_testsub;
@@ -373,8 +373,8 @@ HINT:  To initiate replication, you must manually create the replication slot, e
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | p                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | p                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 -- we can alter streaming when two_phase enabled
@@ -382,8 +382,8 @@ ALTER SUBSCRIPTION regress_testsub SET (streaming = true);
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | on        | p                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | on        | p                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE);
@@ -395,8 +395,8 @@ HINT:  To initiate replication, you must manually create the replication slot, e
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | on        | p                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | on        | p                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE);
@@ -411,16 +411,16 @@ HINT:  To initiate replication, you must manually create the replication slot, e
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | f                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub SET (disable_on_error = true);
 \dRs+
                                                                                                                  List of subscriptions
       Name       |           Owner           | Enabled | Publication | Binary | Streaming | Two-phase commit | Disable on error | Origin | Password required | Run as owner? | Failover | Synchronous commit |          Conninfo           |  Skip LSN  
------------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+----------
+-----------------+---------------------------+---------+-------------+--------+-----------+------------------+------------------+--------+-------------------+---------------+----------+--------------------+-----------------------------+------------
- regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | t                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/0
+ regress_testsub | regress_subscription_user | f       | {testpub}   | f      | parallel  | d                | t                | any    | t                 | f             | f        | off                | dbname=regress_doesnotexist | 0/00000000
 (1 row)
 
 ALTER SUBSCRIPTION regress_testsub SET (slot_name = NONE);