Set log-level-file=off when more that one test will run. In this case is it impossible to see the logs anyway since they will be automatically cleaned up after the test. This improves performance pretty dramatically since trace-level logging is expensive. If a singe integration test is run then log-level-file is trace by default but can be changed with the --log-level-test-file option.
Reduce buffer-size to 64k to save memory during testing and allow more processes to run in parallel.
Update log replacement rules so that these options can change without affecting expect logs.
Remove embedded Perl from the distributed binary. This includes code, configure, Makefile, and packages. The distributed binary is now pure C.
Remove storagePathEnforceSet() from the C Storage object which allowed Perl to write outside of the storage base directory. Update mock/all and real/all integration tests to use storageLocal() where they were violating this rule.
Remove "c" option that allowed the remote to tell if it was being called from C or Perl.
Code to convert options to JSON for passing to Perl (perl/config.c) has been moved to LibC since it is still required for Perl integration tests.
Update build and installation instructions in the user guide.
Remove all Perl unit tests.
Remove obsolete Perl code. In particular this included all the Perl protocol code which required modifications to the Perl storage, manifest, and db objects that are still required for integration testing but only run locally. Any remaining Perl code is required for testing, documentation, or code generation.
Rename perlReq to binReq in define.yaml to indicate that the binary is required for a test. This had been the actual meaning for quite some time but the key was never renamed.
For the most part this is a direct migration of the Perl code into C except as noted below.
A backup can now be initiated from a linked directory. The link will not be stored in the manifest or recreated on restore. If a link or directory does not already exist in the restore location then a directory will be created.
The logic for creating backup labels has been improved and it should no longer be possible to get a backup label earlier than the latest backup even with timezone changes or clock skew. This has never been an issue in the field that we know of, but we found it in testing.
For online backups all times are fetched from the PostgreSQL primary host (before only copy start was). This doesn't affect backup integrity but it does prevent clock skew between hosts affecting backup duration reporting.
Archive copy now works as expected when the archive and backup have different compression settings, i.e. when one is compressed and the other is not. This was a long-standing bug in the Perl code.
Resume will now work even if hardlink settings have been changed.
Reviewed by Cynthia Shang.
82df7e6f and 9856fef5 updated tests that used test points in preparation for the feature not being available in the C code.
Since tests points are no longer used remove the infrastructure.
Also remove one stray --test option in mock/all that was essentially a noop but no longer works now that the option has been removed.
These were not getting updated to match the directory name when the manifests were copied.
The Perl code didn't care but the C code expects labels to be set correctly.
Archive check does not run when in offline backup mode but the option was set to true in the manifest. It's harmless since these options are informational only but it could cause confusion when debugging.
Test points will not be available in the C code so update these tests as best as possible without using them.
This represents a loss of coverage for the Perl code (soon to be removed) which will be made up in the C code with unit tests.
These tests require test points which are not being implemented in the C code.
This functionality is fully tested in the command/control unit tests so integration tests are no longer required.
This expression determines which files contain page checksums but it was also including the directory above the relation directories. In a real PostgreSQL installation this not a problem because these directories don't contain any files.
However, our tests place a file in `base` which the Perl code thought should have page checksums while the new C code says no.
Update the expression to document the change and avoid churn in the expect logs later.
The protocol timeout tests have been superceded by unit tests.
The TEST_BACKUP_RESUME test point was incorrectly included into a number of tests, probably a copy pasto. It didn't hurt anything but it did add 200ms to each test where it appeared.
Catalog and control version tests were redundant. The database version and system id tests covered the important code paths and the C code gets these values from a lookup table.
Finally, fix an incomplete update to the backup.info file while munging for tests.
Previously the mock integration tests would be skipped for VMs other than the standard four used in CI. Now VMs outside the standard four will run the same tests as VM4 (currently U18).
This user was created before we tested in containers to ensure isolation between the pg and repo hosts which were then just directories. The downside is that this resulted in a lot of sudos to set the pgbackrest user and to remove files which did not belong to the main test user.
Containers provide isolation without needing separate users so we can now safely remove the pgbackrest user. This allows us to remove most sudos, except where they are explicitly needed in tests.
While we're at it, remove the code that installed the Perl C library (which also required sudo) and simply add the build path to @INC instead.
This tool was only being used it a few places but was a pretty large dependency.
Rework the forceStorageMove() code using our storage layer and replace one aws cli cp with a storage put.
Also, remove the Dockerfile that was once used to build the Scality S3 test container.
For the most part this is a direct migration of the Perl code into C.
There is one important behavioral change with regard to how file permissions are handled. The Perl code tried to set ownership as it was in the manifest even when running as an unprivileged user. This usually just led to errors and frustration.
The C code works like this:
If a restore is run as a non-root user (the typical scenario) then all files restored will belong to the user/group executing pgBackRest. If existing files are not owned by the executing user/group then an error will result if the ownership cannot be updated to the executing user/group. In that case the file ownership will need to be updated by a privileged user before the restore can be retried.
If a restore is run as the root user then pgBackRest will attempt to recreate the ownership recorded in the manifest when the backup was made. Only user/group names are stored in the manifest so the same names must exist on the restore host for this to work. If the user/group name cannot be found locally then the user/group of the PostgreSQL data directory will be used and finally root if the data directory user/group cannot be mapped to a name.
Reviewed by Cynthia Shang.
This test is commonly used for sanity checking but the combination of S3 and encryption makes it hard to use and encourages temporary changes to make it usable.
Acknowledge this and disable S3 and encryption for this test and move them to mock/all/2.
Prior to 2.16 the Perl manifest code would skip any file that began with a dot. This was not intentional but it allowed PostgreSQL socket files to be located in the data directory. The new C code in 2.16 did not have this unintentional exclusion so socket files in the data directory caused errors.
Worse, the file type error was being thrown before the exclusion check so there was really no way around the issue except to move the socket files out of the data directory.
Special file types (e.g. socket, pipe) will now be automatically skipped and a warning logged to notify the user of the exclusion. The warning can be suppressed with an explicit --exclude.
Reported by CluelessTechnologist, Janis Puris, Rachid Broum.
"null" is not allowed in the manifest format (null values should be missing instead) but Perl was treating the invalid values written by this test as if they were missing.
Update the test code to remove the values rather than setting them to "null".
For offline backups the upper bound was being set to 0x0000FFFF0000FFFF rather than UINT64_MAX. This meant that page checksum errors might be ignored for databases with a lot of past WAL in offline mode.
Online mode is not affected since the upper bound is retrieved from pg_start_backup().
ScalityS3 has not received any maintenance in years and is slow to start which is bad for testing. Replace it with minio which starts quickly and ships as a single executable or a tiny container.
Minio has stricter limits on allowable characters but should still provide enough coverage to show that our encoding is working correctly.
This commit also includes the upgrade to openssl 1.1.1 in the Ubuntu 18.04 container.
Maintaining the storage layer/drivers in two languages is burdensome. Since the integration tests require the Perl storage layer/drivers we'll need them even after the core code is migrated to C. Create an interface layer so the Perl code can be removed and new storage drivers/features introduced without adding Perl equivalents.
The goal is to move the integration tests to C so this interface will eventually be removed. That being the case, the interface was designed for maximum compatibility to ease the transition. The result looks a bit hacky but we'll improve it as needed until it can be retired.
The C code is designed to be efficient rather than deterministic at the debug log level. As we move more testing from integration to unit tests it makes less sense to try and maintain the expect logs at this log level.
Most of the expect logs have already been moved to detail level but mock/all still had tests at debug level. Change the logging defaults in the config file and remove as many references to log-level-console as possible.
This condition was not being properly checked for in the C code and it caused problems in the info command, at the very least.
Instead of applying a local fix, introduce a new path option type that will rigorously check the format of any incoming paths.
Reported by Marc Cousin.
Add the buffer-size, compress-level, compress-level-network, and process-max options to the backup:option section in backup.manifest to aid in debugging.
It may also make sense to propagate these options up to backup.info so they can be displayed in the info command, but for now this is deemed sufficient.
Contributed by blogh.
The same test configurations are run on all four test VMs, which seems a real waste of resources.
Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
There are a number of cases where a checksum delta is more appropriate than the default time-based delta:
* Timeline has switched since the prior backup
* File timestamp is older than recorded in the prior backup
* File size changed but timestamp did not
* File timestamp is in the future compared to the start of the backup
* Online option has changed since the prior backup
A practical example is that checksum delta will be enabled after a failover to standby due to the timeline switch. In this case, timestamps can't be trusted and our recommendation has been to run a full backup, which can impact the retention schedule and requires manual intervention.
Now, a checksum delta will be performed if the backup type is incr/diff. This means more CPU will be used during the backup but the backup size will be smaller and the retention schedule will not be impacted.
Contributed by Cynthia Shang.
PostgreSQL 11 introduces configurable WAL segment sizes, from 1MB to 1GB.
There are two areas that needed to be updated to support this: building the archive-get queue and checking that WAL has been archived after a backup. Both operations require the WAL segment size to properly build a list.
Checking the archive after a backup is still implemented in Perl and has an active database connection, so just get the WAL segment size from the database.
The archive-get command does not have a connection to the database, so get the WAL segment size from pg_control instead. This requires a deeper inspection of pg_control than has been done in the past, so it seemed best to copy the relevant data structures from each version of PostgreSQL and build a generic interface layer to address them. While this approach is a bit verbose, it has the advantage of being relatively simple, and can easily be updated for new versions of PostgreSQL.
Since the integration tests generate pg_control files for testing, teach Perl how to generate files with the correct offsets for both 32-bit and 64-bit architectures.
Use checksums rather than timestamps to determine if files have changed. This is useful in cases where the timestamps may not be trustworthy, e.g. when performing an incremental after failing over to a standby.
If checksum delta is enabled then checksums will be used for verification of resumed backups, even if they are full. Resumes have always used checksums to verify the files in the repository, enabling delta performs checksums on the database files as well.
Note that the user must manually enable this feature in cases were it would be useful or just keep in enabled all the time. A future commit will address automatically enabling the feature in cases where it seems likely to be useful.
Contributed by Cynthia Shang.
% characters caused issues in backup/restore due to filenames being appended directly into a format string.
Reserved XML characters (<>&') caused issues in the S3 driver due to improper escaping.
Add a file with all common special characters to regression testing.
Implemented using the same logic as the patches adding this feature to PostgreSQL, 8694cc96 and 920a5e50. Temporary relation exclusion is enabled in PostgreSQL ≥ 9.0. Unlogged relation exclusion is enabled in PostgreSQL ≥ 9.1, where the feature was introduced.
Contributed by Cynthia Shang.
A regression in v0.82 removed the timestamp comparison when deciding which files from the aborted backup to keep on resume. All resumed backups should be considered inconsistent. A resumed backup can be identified by checking the log for the message "aborted backup of same type exists, will be cleaned to remove invalid files and resumed".
Reported by David Youatt, Yogesh Sharma, Stephen Frost.
This allows specific options in pgbackrest.conf to be ignored (and set to default) which reduces the need to write new configuration files for specific needs.
Note that boolean, non-command-line options are already negatable.
When a backup host is present, backups should only be allowed on the backup host and restores should only be allowed on the database host unless an alternate configuration is created that ignores the remote host.
Reported by Lardière Sébastien.
Required to test restores on the backup server, a fairly common scenario.
Improve the restore function to accept optional parameters rather than a long list of parameters. In passing, clean up extraneous use of strType and strComment variables.
