mirror of
https://github.com/MariaDB/server.git
synced 2025-10-28 17:15:19 +03:00
f404c96e82
This is a post-push fix addressing review requests and
problems with extra warnings.
Problem 1: The sub-statement where an unsafe warning was detected was
printed as part of the warning. This was ok for statements that
were unsafe due to, e.g., calls to UUID(), but did not make
sense for statements that were unsafe because there was more than
one autoincrement column (unsafeness in this case comes from the
combination of several sub-statements).
Fix 1: Instead of printing the sub-statement, print an explanation
of why the statement is unsafe.
Problem 2:
When a recursive construct (i.e., stored proceure, stored
function, trigger, view, prepared statement) contained several
sub-statements, and at least one of them was unsafe, there would be
one unsafeness warning per sub-statement - even for safe
sub-statements.
Fix 2:
Ensure that each type of warning is printed at most once, by
remembering throughout the execution of the statement which types
of warnings have been printed.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
- Clarified comment per review request.
- Added checks for the number of warnings in each invocation.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Per review request, replaced @@session.binlog_format by
@@global.binlog_format, since INSERT DELAYED reads the global
variable. (In this test case, the two variables have the same
value, so the change is cosmetic.)
mysql-test/r/sp_trans.result:
updated result file
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_ps.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file. Note that duplicate warnings are now gone.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Added tests for: (1) a statement that is unsafe in many ways;
(2) a statement that is unsafe in the same way several times.
- Use -- style to invoke mysqltest commands.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
updated result file
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Per review request, added comment explaining what the test case
does (copied from rpl_stm_found_rows.test)
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Clarified grammar in comment.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
Updated result file.
sql/item_create.cc:
Made set_stmt_unsafe take one parameter, describing the
type of unsafeness.
sql/sp_head.cc:
Added unsafe_flags field and made it hold all the unsafe flags.
sql/sp_head.h:
- Removed the BINLOG_ROW_BASED_IF_MIXED flag from m_flags.
Instead, we use the new unsafe_flags field to hold the
unsafeness state of the sp.
- Made propagate_attributes() copy all unsafe flags.
sql/sql_base.cc:
- Made LEX::set_stmt_unsafe() take an extra argument.
- Made binlog_unsafe_warning_flags store the type of unsafeness.
- Per review requests, clarified comments
- Added DBUG printouts
sql/sql_class.cc:
- Made warnings be generated in issue_warnings() and call that from
binlog_query(). Wrote issue_warnings(), which prints zero or more
warnings, avoiding to print warnings more than once per statement.
- Per review request, added @todo so that we remember to assert
correct behavior in binlog_query.
sql/sql_class.h:
- Removed BINLOG_WARNING_PRINTED
- Use [set|clear]_current_stmt_binlog_row_based() instead of
modifying the flag directly.
- added issue_unsafe_warnings() (only called from binlog_unsafe)
- Per review request, improved some documentation.
sql/sql_insert.cc:
Added extra argument to LEX::set_stmt_unsafe()
sql/sql_lex.h:
- Added enum_binlog_stmt_unsafe, listing all types of unsafe
statements.
- Per review requests, improved many comments for member
functions.
- Added [get|set]_stmt_unsafe_flags(), which return/set all the
unsafe flags for a statement.
sql/sql_parse.cc:
- Renamed binlog_warning_flags to binlog_unsafe_warning_flags.
- Per review requests, improved comment.
sql/sql_view.cc:
Made views propagate all the new unsafe flags.
sql/sql_yacc.yy:
Added parameter to set_stmt_unsafe().
storage/innobase/handler/ha_innodb.cc:
Per review requests, replaced DBUG_EXECUTE_IF() by DBUG_EVALUATE_IF().
This directory contains a test suite for the MySQL daemon. To run the currently existing test cases, simply execute ./mysql-test-run in this directory. It will fire up the newly built mysqld and test it. Note that you do not have to have to do "make install", and you could actually have a co-existing MySQL installation. The tests will not conflict with it. All tests must pass. If one or more of them fail on your system, please read the following manual section for instructions on how to report the problem: http://dev.mysql.com/doc/mysql/en/mysql-test-suite.html If you want to use an already running MySQL server for specific tests, use the --extern option to mysql-test-run. Please note that in this mode, the test suite expects you to provide the names of the tests to run. For example, here is the command to run the "alias" and "analyze" tests with an external server: mysql-test-run --extern alias analyze To match your setup, you might also need to provide --socket, --user, and other relevant options. With no test cases named on the command line, mysql-test-run falls back to the normal "non-extern" behavior. The reason for this is that some tests cannot run with an external server. You can create your own test cases. To create a test case, create a new file in the t subdirectory using a text editor. The file should have a .test extension. For example: xemacs t/test_case_name.test In the file, put a set of SQL statements that create some tables, load test data, and run some queries to manipulate it. We would appreciate it if you name your test tables t1, t2, t3 ... (to not conflict too much with existing tables). Your test should begin by dropping the tables you are going to create and end by dropping them again. This ensures that you can run the test over and over again. If you are using mysqltest commands (like result file names) in your test case, you should create the result file as follows: mysql-test-run --record test_case_name or mysqltest --record < t/test_case_name.test If you only have a simple test cases consisting of SQL statements and comments, you can create the test case in one of the following ways: mysql-test-run --record test_case_name mysql test < t/test_case_name.test > r/test_case_name.result mysqltest --record --record-file=r/test_case_name.result < t/test_case_name.test When this is done, take a look at r/test_case_name.result - If the result is incorrect, you have found a bug. In this case, you should edit the test result to the correct results so that we can verify that the bug is corrected in future releases. To submit your test case, put your .test file and .result file(s) into a tar.gz archive, add a README that explains the problem, ftp the archive to ftp://support.mysql.com/pub/mysql/secret/ and send a mail to bugs@lists.mysql.com