database/mariadb
1
0
Fork 0
mirror of https://github.com/MariaDB/server.git synced 2025-10-30 04:26:45 +03:00
Code Activity
Files
f28f985922fae2bc49a6b515699d8404f01bc85b
mariadb/mysql-test/t/debug_sync.test
Ingo Struewing 21586dfb08 WL#4259 - Debug Sync Facility 
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.

  The Debug Sync Facility allows to place synchronization points
  in the code:
  
  open_tables(...)
  
  DEBUG_SYNC(thd, "after_open_tables");
  
  lock_tables(...)
  
  When activated, a sync point can
  
  - Send a signal and/or
  - Wait for a signal
  
  Nomenclature:
  
  - signal:            A value of a global variable that persists
                       until overwritten by a new signal. The global
                       variable can also be seen as a "signal post"
                       or "flag mast". Then the signal is what is
                       attached to the "signal post" or "flag mast".
  
  - send a signal:     Assign the value (the signal) to the global
                       variable ("set a flag") and broadcast a
                       global condition to wake those waiting for
                       a signal.
  
  - wait for a signal: Loop over waiting for the global condition until
                       the global value matches the wait-for signal.
  
  Please find more information in the top comment in debug_sync.cc
  or in the worklog entry.
2009-09-29 17:38:40 +02:00

421 lines
14 KiB
Plaintext
Raw Blame History

###################### t/debug_sync.test ###############################
# #
# Testing of the Debug Sync Facility. #
# #
# There is important documentation within sql/debug_sync.cc #
# #
# Used objects in this test case: #
# p0 - synchronization point 0. Non-existent dummy sync point. #
# s1 - signal 1. #
# s2 - signal 2. #
# #
# Creation: #
# 2008-02-18 istruewing #
# #
########################################################################
#
# We need the Debug Sync Facility.
#
--source include/have_debug_sync.inc
#
# We are checking privileges, which the embedded server cannot do.
#
--source include/not_embedded.inc
#
# Preparative cleanup.
#
--disable_warnings
SET DEBUG_SYNC= 'RESET';
DROP TABLE IF EXISTS t1;
--enable_warnings
#
# Show the special system variable.
# It shows ON or OFF depending on the command line option --debug-sync.
# The test case assumes it is ON (command line option present).
#
SHOW VARIABLES LIKE 'DEBUG_SYNC';
#
# Syntax. Valid forms.
#
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 TIMEOUT 6 EXECUTE 2 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 TIMEOUT 6 EXECUTE 2';
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 TIMEOUT 6 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 TIMEOUT 6';
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 EXECUTE 2 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 EXECUTE 2';
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2';
SET DEBUG_SYNC='p0 SIGNAL s1 EXECUTE 2 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 SIGNAL s1 EXECUTE 2';
SET DEBUG_SYNC='p0 SIGNAL s1 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 SIGNAL s1';
SET DEBUG_SYNC='p0 WAIT_FOR s2 TIMEOUT 6 EXECUTE 2 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 WAIT_FOR s2 TIMEOUT 6 EXECUTE 2';
SET DEBUG_SYNC='p0 WAIT_FOR s2 TIMEOUT 6 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 WAIT_FOR s2 TIMEOUT 6';
SET DEBUG_SYNC='p0 WAIT_FOR s2 EXECUTE 2 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 WAIT_FOR s2 EXECUTE 2';
SET DEBUG_SYNC='p0 WAIT_FOR s2 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 WAIT_FOR s2';
SET DEBUG_SYNC='p0 HIT_LIMIT 3';
SET DEBUG_SYNC='p0 CLEAR';
SET DEBUG_SYNC='p0 TEST';
SET DEBUG_SYNC='RESET';
#
# Syntax. Valid forms. Lower case.
#
set debug_sync='p0 signal s1 wait_for s2 timeout 6 execute 2 hit_limit 3';
set debug_sync='p0 signal s1 wait_for s2 timeout 6 execute 2';
set debug_sync='p0 signal s1 wait_for s2 timeout 6 hit_limit 3';
set debug_sync='p0 signal s1 wait_for s2 timeout 6';
set debug_sync='p0 signal s1 wait_for s2 execute 2 hit_limit 3';
set debug_sync='p0 signal s1 wait_for s2 execute 2';
set debug_sync='p0 signal s1 wait_for s2 hit_limit 3';
set debug_sync='p0 signal s1 wait_for s2';
set debug_sync='p0 signal s1 execute 2 hit_limit 3';
set debug_sync='p0 signal s1 execute 2';
set debug_sync='p0 signal s1 hit_limit 3';
set debug_sync='p0 signal s1';
set debug_sync='p0 wait_for s2 timeout 6 execute 2 hit_limit 3';
set debug_sync='p0 wait_for s2 timeout 6 execute 2';
set debug_sync='p0 wait_for s2 timeout 6 hit_limit 3';
set debug_sync='p0 wait_for s2 timeout 6';
set debug_sync='p0 wait_for s2 execute 2 hit_limit 3';
set debug_sync='p0 wait_for s2 execute 2';
set debug_sync='p0 wait_for s2 hit_limit 3';
set debug_sync='p0 wait_for s2';
set debug_sync='p0 hit_limit 3';
set debug_sync='p0 clear';
set debug_sync='p0 test';
set debug_sync='reset';
#
# Syntax. Valid forms. Line wrap, leading, mid, trailing space.
#
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 TIMEOUT 6
EXECUTE 2 HIT_LIMIT 3';
SET DEBUG_SYNC=' p0 SIGNAL s1 WAIT_FOR s2';
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2';
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 ';
SET DEBUG_SYNC=' p0 SIGNAL s1 WAIT_FOR s2 ';
SET DEBUG_SYNC=' p0 SIGNAL s1 WAIT_FOR s2 ';
#
# Syntax. Invalid forms.
#
--error ER_PARSE_ERROR
SET DEBUG_SYNC='';
--error ER_PARSE_ERROR
SET DEBUG_SYNC=' ';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 EXECUTE 2';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 TIMEOUT 6 EXECUTE 2';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 TIMEOUT 6';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR s2 SIGNAL s1';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR s2 SIGNAL s1 EXECUTE 2';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR s2 SIGNAL s1 TIMEOUT 6 EXECUTE 2';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR s2 SIGNAL s1 TIMEOUT 6';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR s2 TIMEOUT 6 SIGNAL s1 EXECUTE 2';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR s2 TIMEOUT 6 SIGNAL s1';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 TIMEOUT 6 WAIT_FOR s2 EXECUTE 2';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 TIMEOUT 6 WAIT_FOR s2';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 SIGNAL s1 TIMEOUT 6 EXECUTE 2';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 SIGNAL s1 TIMEOUT 6';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 EXECUTE 2 SIGNAL s1 TIMEOUT 6';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 TIMEOUT 6 SIGNAL s1';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 EXECUTE 2 TIMEOUT 6 SIGNAL s1';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 CLEAR HIT_LIMIT 3';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='CLEAR';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 CLEAR p0';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='TEST';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 TEST p0';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 RESET';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='RESET p0';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 RESET p0';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 SIGNAL ';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR ';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 SIGNAL s1 EXECUTE ';
#
# Syntax. Invalid keywords used.
#
--error ER_UNKNOWN_SYSTEM_VARIABLE
SET DEBUG_SYNCx='p0 SIGNAL s1 WAIT_FOR s2 TIMEOUT 6 EXECUTE 2 HIT_LIMIT 3';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 SIGNAx s1 WAIT_FOR s2 TIMEOUT 6 EXECUTE 2 HIT_LIMIT 3';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOx s2 TIMEOUT 6 EXECUTE 2 HIT_LIMIT 3';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 TIMEOUx 0 EXECUTE 2 HIT_LIMIT 3';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 TIMEOUT 6 EXECUTx 2 HIT_LIMIT 3';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 SIGNAL s1 WAIT_FOR s2 TIMEOUT 6 EXECUTE 2 HIT_LIMIx 3';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 CLEARx';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 TESTx';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='RESETx';
#
# Syntax. Invalid numbers. Decimal only.
#
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR s2 TIMEOUT 0x6 EXECUTE 2 HIT_LIMIT 3';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR s2 TIMEOUT 6 EXECUTE 0x2 HIT_LIMIT 3';
--error ER_PARSE_ERROR
SET DEBUG_SYNC='p0 WAIT_FOR s2 TIMEOUT 7 EXECUTE 2 HIT_LIMIT 0x3';
#
# Syntax. Invalid value type.
#
--error ER_WRONG_TYPE_FOR_VAR
SET DEBUG_SYNC= 7;
#
# Syntax. DEBUG_SYNC is a SESSION-only variable.
#
--error ER_LOCAL_VARIABLE
SET GLOBAL DEBUG_SYNC= 'p0 CLEAR';
#
# Syntax. The variable value does not need to be a string literal.
#
SET @myvar= 'now SIGNAL from_myvar';
SET DEBUG_SYNC= @myvar;
SHOW VARIABLES LIKE 'DEBUG_SYNC';
#
SET DEBUG_SYNC= LEFT('now SIGNAL from_function_cut_here', 24);
SHOW VARIABLES LIKE 'DEBUG_SYNC';
#
# Functional tests.
#
# NOTE: There is the special synchronization point 'now'. It is placed
# immediately after setting of the DEBUG_SYNC variable.
# So it is executed before the SET statement ends.
#
# NOTE: There is only one global signal (say "signal post" or "flag mast").
# A SIGNAL action writes its signal into it ("sets a flag").
# The signal persists until explicitly overwritten.
# To avoid confusion for later tests, it is recommended to clear
# the signal by signalling "empty" ("setting the 'empty' flag"):
# SET DEBUG_SYNC= 'now SIGNAL empty';
# Preferably you can reset the whole facility with:
# SET DEBUG_SYNC= 'RESET';
# The signal is then '' (really empty) which connot be done otherwise.
#
#
# Time out immediately. This gives just a warning.
#
SET DEBUG_SYNC= 'now SIGNAL something';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
# Suppress warning number
--replace_column 2 ####
SET DEBUG_SYNC= 'now WAIT_FOR nothing TIMEOUT 0';
#
# If signal is present already, TIMEOUT 0 does not give a warning.
#
SET DEBUG_SYNC= 'now SIGNAL nothing';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
SET DEBUG_SYNC= 'now WAIT_FOR nothing TIMEOUT 0';
#
# EXECUTE 0 is effectively a no-op.
#
SET DEBUG_SYNC= 'now SIGNAL something EXECUTE 0';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
SET DEBUG_SYNC= 'now WAIT_FOR anotherthing TIMEOUT 0 EXECUTE 0';
#
# Run into HIT_LIMIT. This gives an error.
#
--error ER_DEBUG_SYNC_HIT_LIMIT
SET DEBUG_SYNC= 'now HIT_LIMIT 1';
#
# Many actions. Watch the array growing and shrinking in the debug trace:
# egrep 'query:|debug_sync_action:' mysql-test/var/log/master.trace
#
SET DEBUG_SYNC= 'RESET';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
SET DEBUG_SYNC= 'p1abcd SIGNAL s1 EXECUTE 2';
SET DEBUG_SYNC= 'p2abc SIGNAL s2 EXECUTE 2';
SET DEBUG_SYNC= 'p9abcdef SIGNAL s9 EXECUTE 2';
SET DEBUG_SYNC= 'p4a SIGNAL s4 EXECUTE 2';
SET DEBUG_SYNC= 'p5abcde SIGNAL s5 EXECUTE 2';
SET DEBUG_SYNC= 'p6ab SIGNAL s6 EXECUTE 2';
SET DEBUG_SYNC= 'p7 SIGNAL s7 EXECUTE 2';
SET DEBUG_SYNC= 'p8abcdef SIGNAL s8 EXECUTE 2';
SET DEBUG_SYNC= 'p3abcdef SIGNAL s3 EXECUTE 2';
#
# Execute some actions to show they exist. Each sets a distinct signal.
#
SET DEBUG_SYNC= 'p4a TEST';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
SET DEBUG_SYNC= 'p1abcd TEST';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
SET DEBUG_SYNC= 'p7 TEST';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
SET DEBUG_SYNC= 'p9abcdef TEST';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
SET DEBUG_SYNC= 'p3abcdef TEST';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
#
# Clear the actions.
#
SET DEBUG_SYNC= 'p1abcd CLEAR';
SET DEBUG_SYNC= 'p2abc CLEAR';
SET DEBUG_SYNC= 'p5abcde CLEAR';
SET DEBUG_SYNC= 'p6ab CLEAR';
SET DEBUG_SYNC= 'p8abcdef CLEAR';
SET DEBUG_SYNC= 'p9abcdef CLEAR';
SET DEBUG_SYNC= 'p3abcdef CLEAR';
SET DEBUG_SYNC= 'p4a CLEAR';
SET DEBUG_SYNC= 'p7 CLEAR';
#
# Execute some actions to show they have gone.
#
SET DEBUG_SYNC= 'p1abcd TEST';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
SET DEBUG_SYNC= 'p7 TEST';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
SET DEBUG_SYNC= 'p9abcdef TEST';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
#
# Now cleanup. Actions are clear already, but signal needs to be cleared.
#
SET DEBUG_SYNC= 'RESET';
SHOW VARIABLES LIKE 'DEBUG_SYNC';
#
# Facility requires SUPER privilege.
#
CREATE USER mysqltest_1@localhost;
GRANT SUPER ON *.* TO mysqltest_1@localhost;
--echo connection con1, mysqltest_1
connect (con1,localhost,mysqltest_1,,);
SET DEBUG_SYNC= 'RESET';
disconnect con1;
--echo connection default
connection default;
DROP USER mysqltest_1@localhost;
#
CREATE USER mysqltest_2@localhost;
GRANT ALL ON *.* TO mysqltest_2@localhost;
REVOKE SUPER ON *.* FROM mysqltest_2@localhost;
--echo connection con1, mysqltest_2
connect (con1,localhost,mysqltest_2,,);
--error ER_SPECIFIC_ACCESS_DENIED_ERROR
SET DEBUG_SYNC= 'RESET';
disconnect con1;
--echo connection default
connection default;
DROP USER mysqltest_2@localhost;
#
# Example 1.
#
# Preparative cleanup.
--disable_warnings
SET DEBUG_SYNC= 'RESET';
DROP TABLE IF EXISTS t1;
--enable_warnings
#
# Test.
CREATE TABLE t1 (c1 INT);
--echo connection con1
connect (con1,localhost,root,,);
SET DEBUG_SYNC= 'before_lock_tables_takes_lock
SIGNAL opened WAIT_FOR flushed';
send INSERT INTO t1 VALUES(1);
--echo connection default
connection default;
SET DEBUG_SYNC= 'now WAIT_FOR opened';
SET DEBUG_SYNC= 'after_flush_unlock SIGNAL flushed';
FLUSH TABLE t1;
--echo connection con1
connection con1;
reap;
disconnect con1;
--echo connection default
connection default;
DROP TABLE t1;
#
# Example 2.
#
# Preparative cleanup.
--disable_warnings
SET DEBUG_SYNC= 'RESET';
DROP TABLE IF EXISTS t1;
--enable_warnings
#
# Test.
CREATE TABLE t1 (c1 INT);
LOCK TABLE t1 WRITE;
--echo connection con1
connect (con1,localhost,root,,);
# Retain action after use. First used by general_log.
SET DEBUG_SYNC= 'wait_for_lock SIGNAL locked EXECUTE 2';
send INSERT INTO t1 VALUES (1);
--echo connection default
connection default;
# Wait until INSERT waits for lock.
SET DEBUG_SYNC= 'now WAIT_FOR locked';
# let INSERT continue.
UNLOCK TABLES;
--echo connection con1
connection con1;
--echo retrieve INSERT result.
reap;
disconnect con1;
--echo connection default
connection default;
DROP TABLE t1;
#
# Cleanup after test case.
# Otherwise signal would contain 'flushed' here,
# which could confuse the next test.
#
SET DEBUG_SYNC= 'RESET';
View Git Blame Copy Permalink