#
# Purpose:
#
# This test ensures the mariadb-binlog command line tool filters events
# by domain id (via --do-domain-ids and --ignore-domain-ids) and server id (via
# --ignore-server-ids) in the same way that a replica server does.
#
#
# Methodology:
#
# This test validates that the domain and server id filtering logic of
# mariadb-binlog matches that of a replica server. In particular, it validates
# a mariadb-binlog replay of a master's binary log is consistent with a
# replica's state which is configured using the same filtering configuration.
#
# It uses a repeatable process to allow for multiple test cases that span
# different filtering configurations. First, a master is seeded with an initial
# set of SQL statements with varying domain and server ids. Then, a set of
# filtering parameters supported by both mariadb-binlog and replica
# capabilities are defined. The replica is configured using these parameters
# and run it until it has processed all events from the primary server; it is
# stopped afterward. For mariadb-binlog validation, the binary log of the
# primary server is copied to a different location for later replay. The
# primary is then reset to its initial state (i.e. the tables are dropped and
# the logs are reset). The mariadb-binlog tool is then used to replay the
# copied binary log file back onto the clean primary server under the same
# filtering conditions as the replica. At this point, the data on the primary
# and replica should be exactly the same because the filtering conditions were
# the same, and all existing tables on both servers are compared using.
# checksums.
#
#
# References:
#
#   MDEV-20119: Implement the --do-domain-ids, --ignore-domain-ids, and
#               --ignore-server-ids options for mysqlbinlog
#
--source include/master-slave.inc

--connection slave
SET sql_log_bin=0;
call mtr.add_suppression("Slave: An attempt was made.*");
call mtr.add_suppression("Both DO_DOMAIN_IDS & IGNORE_DOMAIN_IDS lists can't be non-empty at the same time");
SET sql_log_bin=1;

--source include/stop_slave.inc

--connection master
RESET MASTER;

# Save old state
let $ORIG_GTID_DOMAIN_ID = `select @@session.gtid_domain_id`;
let $ORIG_SERVER_ID = `select @@session.server_id`;

--connection slave
--source include/start_slave.inc

# Initial tests do not use strict mode
--let $strict_mode=0
--let $slave_sql_errno=0

--echo #
--echo #
--echo #  Test Case 1: Base case to ensure that mariadb-binlog and replica
--echo #  are consistent without any filtering
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 2: Ensure filtering by a single id in --do-domain-ids is
--echo #  consistent between mariadb-binlog and replica
--echo #
--let $do_domain_ids=0
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 3: Ensure filtering by multiple ids in --do-domain-ids is
--echo #  consistent between mariadb-binlog and replica
--echo #
--let $do_domain_ids=0,1
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #  Test Case 4: Ensure filtering by a single id in --ignore-domain-ids
--echo #  is consistent between mariadb-binlog and replica
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=0
--let $ignore_server_ids=
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 5: Ensure filtering by multiple ids in --ignore-domain-ids
--echo #  is consistent between mariadb-binlog and replica
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=0,1
--let $ignore_server_ids=
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #  Test Case 6: Ensure filtering by a single id in --ignore-server-ids
--echo #  is consistent between mariadb-binlog and replica
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=
--let $ignore_server_ids=1
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 7: Ensure filtering by multiple ids in --ignore-server-ids
--echo #  is consistent between mariadb-binlog and replica
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=
--let $ignore_server_ids=0,1
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 8: Ensure stop position consistency
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=1-1-2
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 9: Ensure start position consistency
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=
--let $start_position=1-4-2
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 10: Ensure consistency when filtering by both
--echo #  --do-domain-ids and --ignore-server-ids
--echo #
--let $do_domain_ids=0
--let $ignore_domain_ids=
--let $ignore_server_ids=1
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 11: Ensure consistency when filtering by both
--echo #  --ignore-domain-ids and --ignore-server-ids
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=1,2
--let $ignore_server_ids=1
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 12: Ensure consistency when filtering by
--echo #  --do-domain-ids with a stop position
--echo #
--let $do_domain_ids=0
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=0-1-4
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 13: Ensure consistency when filtering by
--echo #  --ignore-domain-ids with a stop position
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=0
--let $ignore_server_ids=
--let $stop_position=0-1-4
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 14: Ensure consistency when filtering by
--echo #  --ignore-server-ids with a stop position
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=
--let $ignore_server_ids=3
--let $stop_position=0-1-4
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 15: Ensure consistency when filtering by
--echo #  --do-domain-ids with a start position
--echo #
--let $do_domain_ids=2
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=
--let $start_position=1-1-2
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 16: Ensure consistency when filtering by
--echo #  --ignore-domain-ids with a start position
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=0
--let $ignore_server_ids=
--let $stop_position=
--let $start_position=0-1-1
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 17: Ensure consistency when filtering by
--echo #  --ignore-server-ids with a start position
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=
--let $ignore_server_ids=1
--let $stop_position=
--let $start_position=0-1-1
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 18: Ensure consistency when filtering by
--echo #  --do-domain-ids with both a start position and stop position that
--echo # all have the same domain id
--echo #
--let $do_domain_ids=0
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=0-3-3
--let $start_position=0-1-1
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 19: Ensure consistency when filtering by
--echo #  --do-domain-ids with both a start position and stop position that
--echo #  have differing domain ids. Due to the implicit filtering in stop
--echo #  position, the result should be empty (no tables replicated).
--echo #
--let $do_domain_ids=1
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=0-3-3
--let $start_position=0-1-1
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 20: Ensure consistency when filtering by
--echo #  --ignore-domain-ids with both a start position and stop position that
--echo #  all have the same domain id. The result set should be empty due to
--echo #  implicit filtering from stop position and ignoring that same domain.
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=0
--let $ignore_server_ids=
--let $stop_position=0-3-3
--let $start_position=0-1-1
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 21: Ensure consistency when filtering by
--echo #  --ignore-domain-ids with both a start position and stop position that
--echo #  have differing domain ids. The ignore domain ids should take no
--echo #  effect due to the implicit filtering by stop position, i.e. the
--echo #  specified domain to ignore is already being filtered.
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=1
--let $ignore_server_ids=
--let $stop_position=0-3-3
--let $start_position=0-1-1
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 22: Ensure consistency when filtering by
--echo #  --ignore-server-ids with both a start position and stop position.
--echo #
--let $do_domain_ids=
--let $ignore_domain_ids=
--let $ignore_server_ids=3
--let $stop_position=0-3-3
--let $start_position=0-1-0
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 23: Out of order GTIDs from domains or servers which are
--echo #  filtered out should not error
--echo #
--let $strict_mode=1
--let $strict_mode_err=0
--let $slave_sql_errno=0
--let $do_domain_ids=0
--let $ignore_domain_ids=
--let $ignore_server_ids=3
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 24: Out of order GTIDs from included domains should error
--echo #
--let $strict_mode=1
--let $strict_mode_err=1
--let $slave_sql_errno=1950
--let $do_domain_ids=1
--let $ignore_domain_ids=
--let $ignore_server_ids=
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 25: Out of order GTIDs from included servers should error
--echo #
--let $strict_mode=1
--let $strict_mode_err=1
--let $slave_sql_errno=1950
--let $do_domain_ids=
--let $ignore_domain_ids=
--let $ignore_server_ids=1
--let $stop_position=
--let $start_position=
--source include/mysqlbinlog_slave_consistency.inc

--echo #
--echo #
--echo #  Test Case 26: Neither mysqlbinlog nor CHANGE MASTER TO should allow
--echo #  both do domain ids and ignore domain ids to be set together
--echo #
--connection slave
--source include/stop_slave.inc

--error 1201
CHANGE MASTER TO MASTER_USE_GTID=slave_pos, DO_DOMAIN_IDS=(0), IGNORE_DOMAIN_IDS=(1);

--let $MYSQLD_DATADIR=`select @@datadir`
--let BINLOG_FILENAME= query_get_value(SHOW BINARY LOGS, Log_name, 1)
--let BINLOG_FILE_PARAM= $MYSQLD_DATADIR/$BINLOG_FILENAME.orig
--error 1
--exec $MYSQL_BINLOG $MYSQLD_DATADIR/$BINLOG_FILENAME --do-domain-ids=0 --ignore-domain-ids=1

RESET MASTER;
set global gtid_slave_pos="";
CHANGE MASTER TO MASTER_USE_GTID=slave_pos, DO_DOMAIN_IDS=(), IGNORE_DOMAIN_IDS=();
--source include/start_slave.inc

# Cleanup
--connection master
RESET MASTER;

--source include/rpl_end.inc

--echo # End of tests (rpl.rpl_mysqlbinlog_slave_consistency)