Added cleanup of status variables to the end of binlog_database.
Re-recorded .result file to account for cleanup statement.
NOTE: binlog.binlog_innodb also has had an FLUSH STATUS; statement added to it as well, but
adding this cleanup as a preventative measure.
The Blackhole engine did not support row-based replication
since the delete_row(), update_row(), and the index and range
searching functions were not implemented.
This patch adds row-based replication support for the
Blackhole engine by implementing the two functions mentioned
above, and making the engine pretend that it has found the
correct row to delete or update when executed from the slave
SQL thread by implementing index and range searching functions.
It is necessary to only pretend this for the SQL thread, since
a SELECT executed on the Blackhole engine will otherwise never
return EOF, causing a livelock.
The size of the Innodb_buffer_pool_pages differs by one byte on row versus statement
log, so neuter the last position of the stringified decimal representation. Innobase
says the size isn't very important in any case.
Also, split out the "mixed" format to its own file, as mtr seems to dislike having only
stm and row but not mix.
tables open
When executing a DROP DATABASE statement in ROW mode and having temporary
tables open at the same time, the existance of temporary tables prevent
the server from switching back to row mode after temporarily switching to
statement mode to handle the logging of the statement.
Fixed the problem by removing the code to switch to statement mode and added
code to temporarily disable the binary log while dropping the objects in the
database.
Problem: binlog_stm_binlog runs INSERT DELAYED queries, and
then prints the contents of the binlog. Before checking the
contents of the binlog, the test waits until the rows have
appeared in the table. However, this is not enough, since
INSERT DELAYED does not write rows to the binlog at the same
time as it writes them to the table. So there is a race.
Fix: Add a FLUSH TABLES before SHOW BINLOG EVENTS. That
waits until the insert_delayed thread is done.
DROP DATABASE statement writes changes to mysql.proc table under RBR
When replicating a DROP DATABASE statement with a database holding
stored procedures, the changes to the mysql.proc table was recorded
in the binary log under row-based replication.
With this patch, the thread uses statement-logging format for the
duration of the DROP DATABASE statement. The logging format is
(already) reset at the end of the statement, so no additional code
for resetting the logging format is necessary.
corrupts a MERGE table
Bug 26867 - LOCK TABLES + REPAIR + merge table result in
memory/cpu hogging
Bug 26377 - Deadlock with MERGE and FLUSH TABLE
Bug 25038 - Waiting TRUNCATE
Bug 25700 - merge base tables get corrupted by
optimize/analyze/repair table
Bug 30275 - Merge tables: flush tables or unlock tables
causes server to crash
Bug 19627 - temporary merge table locking
Bug 27660 - Falcon: merge table possible
Bug 30273 - merge tables: Can't lock file (errno: 155)
The problems were:
Bug 26379 - Combination of FLUSH TABLE and REPAIR TABLE
corrupts a MERGE table
1. A thread trying to lock a MERGE table performs busy waiting while
REPAIR TABLE or a similar table administration task is ongoing on
one or more of its MyISAM tables.
2. A thread trying to lock a MERGE table performs busy waiting until all
threads that did REPAIR TABLE or similar table administration tasks
on one or more of its MyISAM tables in LOCK TABLES segments do UNLOCK
TABLES. The difference against problem #1 is that the busy waiting
takes place *after* the administration task. It is terminated by
UNLOCK TABLES only.
3. Two FLUSH TABLES within a LOCK TABLES segment can invalidate the
lock. This does *not* require a MERGE table. The first FLUSH TABLES
can be replaced by any statement that requires other threads to
reopen the table. In 5.0 and 5.1 a single FLUSH TABLES can provoke
the problem.
Bug 26867 - LOCK TABLES + REPAIR + merge table result in
memory/cpu hogging
Trying DML on a MERGE table, which has a child locked and
repaired by another thread, made an infinite loop in the server.
Bug 26377 - Deadlock with MERGE and FLUSH TABLE
Locking a MERGE table and its children in parent-child order
and flushing the child deadlocked the server.
Bug 25038 - Waiting TRUNCATE
Truncating a MERGE child, while the MERGE table was in use,
let the truncate fail instead of waiting for the table to
become free.
Bug 25700 - merge base tables get corrupted by
optimize/analyze/repair table
Repairing a child of an open MERGE table corrupted the child.
It was necessary to FLUSH the child first.
Bug 30275 - Merge tables: flush tables or unlock tables
causes server to crash
Flushing and optimizing locked MERGE children crashed the server.
Bug 19627 - temporary merge table locking
Use of a temporary MERGE table with non-temporary children
could corrupt the children.
Temporary tables are never locked. So we do now prohibit
non-temporary chidlren of a temporary MERGE table.
Bug 27660 - Falcon: merge table possible
It was possible to create a MERGE table with non-MyISAM children.
Bug 30273 - merge tables: Can't lock file (errno: 155)
This was a Windows-only bug. Table administration statements
sometimes failed with "Can't lock file (errno: 155)".
These bugs are fixed by a new implementation of MERGE table open.
When opening a MERGE table in open_tables() we do now add the
child tables to the list of tables to be opened by open_tables()
(the "query_list"). The children are not opened in the handler at
this stage.
After opening the parent, open_tables() opens each child from the
now extended query_list. When the last child is opened, we remove
the children from the query_list again and attach the children to
the parent. This behaves similar to the old open. However it does
not open the MyISAM tables directly, but grabs them from the already
open children.
When closing a MERGE table in close_thread_table() we detach the
children only. Closing of the children is done implicitly because
they are in thd->open_tables.
For more detail see the comment at the top of ha_myisammrg.cc.
Changed from open_ltable() to open_and_lock_tables() in all places
that can be relevant for MERGE tables. The latter can handle tables
added to the list on the fly. When open_ltable() was used in a loop
over a list of tables, the list must be temporarily terminated
after every table for open_and_lock_tables().
table_list->required_type is set to FRMTYPE_TABLE to avoid open of
special tables. Handling of derived tables is suppressed.
These details are handled by the new function
open_n_lock_single_table(), which has nearly the same signature as
open_ltable() and can replace it in most cases.
In reopen_tables() some of the tables open by a thread can be
closed and reopened. When a MERGE child is affected, the parent
must be closed and reopened too. Closing of the parent is forced
before the first child is closed. Reopen happens in the order of
thd->open_tables. MERGE parents do not attach their children
automatically at open. This is done after all tables are reopened.
So all children are open when attaching them.
Special lock handling like mysql_lock_abort() or mysql_lock_remove()
needs to be suppressed for MERGE children or forwarded to the parent.
This depends on the situation. In loops over all open tables one
suppresses child lock handling. When a single table is touched,
forwarding is done.
Behavioral changes:
===================
This patch changes the behavior of temporary MERGE tables.
Temporary MERGE must have temporary children.
The old behavior was wrong. A temporary table is not locked. Hence
even non-temporary children were not locked. See
Bug 19627 - temporary merge table locking.
You cannot change the union list of a non-temporary MERGE table
when LOCK TABLES is in effect. The following does *not* work:
CREATE TABLE m1 ... ENGINE=MRG_MYISAM ...;
LOCK TABLES t1 WRITE, t2 WRITE, m1 WRITE;
ALTER TABLE m1 ... UNION=(t1,t2) ...;
However, you can do this with a temporary MERGE table.
You cannot create a MERGE table with CREATE ... SELECT, neither
as a temporary MERGE table, nor as a non-temporary MERGE table.
CREATE TABLE m1 ... ENGINE=MRG_MYISAM ... SELECT ...;
Gives error message: table is not BASE TABLE.
minor fixes to appease pushbuild.
---
Merge sin.intern.azundris.com:/home/tnurnberg/22540/50-22540
into sin.intern.azundris.com:/home/tnurnberg/22540/51-22540
previous correction didn't. make sure "tail" is fixed up
when filling cache several times; rework formulae.
---
Merge sin.intern.azundris.com:/home/tnurnberg/22540/50-22540
into sin.intern.azundris.com:/home/tnurnberg/22540/51-22540
fix binlog-writing so that end_log_pos is given correctly even
within transactions for both SHOW BINLOG and SHOW MASTER STATUS,
that is as absolute values (from log start) rather than relative
values (from transaction's start).
---
Merge sin.intern.azundris.com:/home/tnurnberg/22540/50-22540
into sin.intern.azundris.com:/home/tnurnberg/22540/51-22540
---
Merge tnurnberg@bk-internal.mysql.com:/home/bk/mysql-5.1-maint
into sin.intern.azundris.com:/home/tnurnberg/22540/51-22540
The patch for WL 1563 added a new duplicate key error message so that the
key name could be provided instead of the key number. But the error code
for the new message was used even though that did not need to change.
This could cause unnecessary problems for applications that used the old
ER_DUP_ENTRY error code to detect duplicate key errors.
Adding an event that can be used to denote that an incident occured
on the master. The event can be used to denote a gap in the replication
stream, but can also be used to denote other incidents.
In addition, the injector interface is extended with functions to
generate an incident event. The function will also rotate the binary
log after generating an incident event to get a fresh binary log.
There was hanging at binlog_commit by a thread executing autocommit query.
The hang appeared to be due to an overly condtion for early return
from binlog_commit introduced by bug#20265 fix.
Fixed with reverting the logic back to 5.0 version.
