Fix the bug properly (plugin cannot be unloaded as long as it's locked).
Enable and fix the test case.
Significantly reduce number of LOCK_plugin locks for semisync
(practically all locks were removed)
~40% bugfixed(*) applied
~40$ bugfixed reverted (incorrect or we're not buggy)
~20% bugfixed applied, despite us being not buggy
(*) only changes in the server code, e.g. not cmakefiles
This bug only happens in case of paritioned tables used in LOCK TABLES and implicit_commit() was called
(as part of trying to execute a CREATE TABLE withing lock tables)
The problem was that Aria could not move the tables from one transaction to the new one, as thd->open_tables contained
a partitioned tables and not an Aria table.
Fix:
- Store a list of all open tables that are part of a share in share->open_tables
- In maria::implict_commit() use transaction->used_tables & share->open_tables to find out which tables
was part of the current transaction instead of using thd->open_tables, which may contain partitioned tables.
mysql-test/suite/maria/maria_partition.result:
Added test case
mysql-test/suite/maria/maria_partition.test:
Added test case
storage/maria/ha_maria.cc:
Use trn->used tables and share->open_tables to find out which tables was part of the current transaction instead of using thd->open_tables.
storage/maria/ma_close.c:
Remove closed table from share->open_list
storage/maria/ma_open.c:
Add table to share->open_list
storage/maria/ma_state.c:
Added comment
storage/maria/maria_def.h:
Added share->open_list, a list of all tables that is using this share.
- adjusted a test result according to the change made for MDEV-6100;
- added explicit timezone for engines/iuds, since MTR in
MariaDB does not set it like MySQL's, and tests with constant TIMESTAMP
can have different outcome
The test case makes use of the fine DEBUG_SYNC facility. Furthermore,
since it needs synchronization on internal threads (dump and SQL
threads) the server code has DEBUG_SYNC commands internally deployed
and activated through the DBUG_EXECUTE_IF macro. The internal
DBUG_SYNC commands are then controlled from the test case through the
DEBUG variable.
There were three problems around the DEBUG + DEBUG_SYNC facility
usage:
1. When signaling the SQL thread to continue, the test would reset
immediately the DEBUG_SYNC variable. This could mean that the SQL
thread might loose the signal and continue to wait forever;
2. A similar scenario was happening with the dump thread on the
master. This thread was instructed to wait, and later it would be
signaled to continue, but immediately after the DEBUG_SYNC would be
reset. This could lead to the dump thread missing the signal and
wait forever;
3. The test was not cleaning itself up with respect to the
instrumentation of the dump thread. This would leave the
conditional execution of an internal DEBUG_SYNC command active
(through the usage of DBUG_EXECUTE_IF).
We fix#1 and #2 by waiting for the threads to receive the signal and
only then issue the reset. We fix#3 by reseting the DEBUG variable,
thus deactivating the dump thread internal DEBUG_SYNC command.
Bug#16415173 CRLF INSTEAD OF LF IN SQL-BENCH SCRIPTS
Correct perms and converts from Windows style to UNIX style line endings on some files.
Fix perms on installed ini files.
(MySQL 5.5 version)
DISCONNECT CON1 AND CON2
Problem:
The test suite/binlog/t/binlog_killed.test makes the connections
con1 and con2 but forgets to disconnect them + wait till that
operation is finished at test end.
This mistake has the potential to harm subsequent tests in
case these tests depend on the content of the processlist.
Solution:
Added disconnect + wait_until_disconnected.inc
within the test cleanup.
That particular part of slave connect to master was missing code to handle
retry in case of network errors. The same problem is present in MySQL 5.5, but
fixed in MySQL 5.6.
Fixed with this patch, by adding the code (mostly identical to MySQL 5.6), and
also adding a test case.
I checked other queries done towards master during slave connect, and they now
all seem to handle reconnect in case of network failures.
SLOW/CRASHES SEMAPHORE
Problem:
There are 2 lakh tables - fk_000001, fk_000002 ... fk_200000. All of them
are related to the same parent_table through a foreign key constraint.
When the parent_table is loaded into the dictionary cache, all the child table
will also be loaded. This is taking lot of time. Since this operation happens
when the dictionary latch is taken, the scenario leads to "long semaphore wait"
situation and the server gets killed.
Analysis:
A simple performance analysis showed that the slowness is because of the
dict_foreign_find() function. It does a linear search on two linked list
table->foreign_list and table->referenced_list, looking for a particular
foreign key object based on foreign->id as the key. This is called two
times for each foreign key object.
Solution:
Introduce a rb tree in table->foreign_rbt and table->referenced_rbt, which
are some sort of index on table->foreign_list and table->referenced_list
respectively, using foreign->id as the key. These rbt structures will be
solely used by dict_foreign_find().
rb#5599 approved by Vasil
SHOW PROCESSLIST, SHOW BINLOGS
Problem: A deadlock was occurring when 4 threads were
involved in acquiring locks in the following way
Thread 1: Dump thread ( Slave is reconnecting, so on
Master, a new dump thread is trying kill
zombie dump threads. It acquired thread's
LOCK_thd_data and it is about to acquire
mysys_var->current_mutex ( which LOCK_log)
Thread 2: Application thread is executing show binlogs and
acquired LOCK_log and it is about to acquire
LOCK_index.
Thread 3: Application thread is executing Purge binary logs
and acquired LOCK_index and it is about to
acquire LOCK_thread_count.
Thread 4: Application thread is executing show processlist
and acquired LOCK_thread_count and it is
about to acquire zombie dump thread's
LOCK_thd_data.
Deadlock Cycle:
Thread 1 -> Thread 2 -> Thread 3-> Thread 4 ->Thread 1
The same above deadlock was observed even when thread 4 is
executing 'SELECT * FROM information_schema.processlist' command and
acquired LOCK_thread_count and it is about to acquire zombie
dump thread's LOCK_thd_data.
Analysis:
There are four locks involved in the deadlock. LOCK_log,
LOCK_thread_count, LOCK_index and LOCK_thd_data.
LOCK_log, LOCK_thread_count, LOCK_index are global mutexes
where as LOCK_thd_data is local to a thread.
We can divide these four locks in two groups.
Group 1 consists of LOCK_log and LOCK_index and the order
should be LOCK_log followed by LOCK_index.
Group 2 consists of other two mutexes
LOCK_thread_count, LOCK_thd_data and the order should
be LOCK_thread_count followed by LOCK_thd_data.
Unfortunately, there is no specific predefined lock order defined
to follow in the MySQL system when it comes to locks across these
two groups. In the above problematic example,
there is no problem in the way we are acquiring the locks
if you see each thread individually.
But If you combine all 4 threads, they end up in a deadlock.
Fix:
Since everything seems to be fine in the way threads are taking locks,
In this patch We are changing the duration of the locks in Thread 4
to break the deadlock. i.e., before the patch, Thread 4
('show processlist' command) mysqld_list_processes()
function acquires LOCK_thread_count for the complete duration
of the function and it also acquires/releases
each thread's LOCK_thd_data.
LOCK_thread_count is used to protect addition and
deletion of threads in global threads list. While show
process list is looping through all the existing threads,
it will be a problem if a thread is exited but there is no problem
if a new thread is added to the system. Hence a new mutex is
introduced "LOCK_thd_remove" which will protect deletion
of a thread from global threads list. All threads which are
getting exited should acquire LOCK_thd_remove
followed by LOCK_thread_count. (It should take LOCK_thread_count
also because other places of the code still thinks that exit thread
is protected with LOCK_thread_count. In this fix, we are changing
only 'show process list' query logic )
(Eg: unlink_thd logic will be protected with
LOCK_thd_remove).
Logic of mysqld_list_processes(or file_schema_processlist)
will now be protected with 'LOCK_thd_remove' instead of
'LOCK_thread_count'.
Now the new locking order after this patch is:
LOCK_thd_remove -> LOCK_thd_data -> LOCK_log ->
LOCK_index -> LOCK_thread_count
on select from I_S.INNODB_CHANGED_PAGES
Analysis: limit_lsn_range_from_condition() incorrectly parses
start_lsn and/or end_lsn conditions.
Fix from SergeyP. Added some test cases.
Problem: Uninstallation of semi sync plugin causes replication to
break.
Analysis: A semisync enabled replication is mutual agreement between
Master and Slave when the connection (I/O thread) is established.
Once I/O thread is started and if semisync is enabled on both
master and slave, master appends special magic header to events
using semisync plugin functions and sends it to slave. And slave
expects that each event will have that special magic header format
and reads those bytes using semisync plugin functions.
When semi sync replication is in use if users execute
uninstallation of the plugin on master, slave gets confused while
interpreting that event's content because it expects special
magic header at the beginning of the event. Slave SQL thread will
be stopped with "Missing magic number in the header" error.
Similar problem will happen if uninstallation of the plugin happens
on slave when semi sync replication is in in use. Master sends
the events with magic header and slave does not know about the
added magic header and thinks that it received a corrupted event.
Hence slave SQL thread stops with "Found corrupted event" error.
Fix: Uninstallation of semisync plugin will be blocked when semisync
replication is in use and will throw 'ER_UNKNOWN_ERROR' error.
To detect that semisync replication is in use, this patch uses
semisync status variable values.
> On Master, it checks for 'Rpl_semi_sync_master_status' to be OFF
before allowing the uninstallation of rpl_semi_sync_master plugin.
>> Rpl_semi_sync_master_status is OFF when
>>> there is no dump thread running
>>> there are no semisync slaves
> On Slave, it checks for 'Rpl_semi_sync_slave_status' to be OFF
before allowing the uninstallation of rpl_semi_sync_slave plugin.
>> Rpl_semi_sync_slave_status is OFF when
>>> there is no I/O thread running
>>> replication is asynchronous replication.
BREAKS RBR
Analysis:
--------
A table created using a query of the format:
CREATE TABLE t1 AS SELECT REPEAT('A',1000) DIV 1 AS a;
breaks the Row Based Replication.
The query above creates a table having a field of datatype
'bigint' with a display width of 3000 which is beyond the
maximum acceptable value of 255.
In the RBR mode, CREATE TABLE SELECT statement is
replicated as a combination of CREATE TABLE statement
equivalent to one the returned by SHOW CREATE TABLE and
row events for rows inserted. When this CREATE TABLE event
is executed on the slave, an error is reported:
Display width out of range for column 'a' (max = 255)
The following is the output of 'SHOW CREATE TABLE t1':
CREATE TABLE t1(`a` bigint(3000) DEFAULT NULL)
ENGINE=InnoDB DEFAULT CHARSET=latin1;
The problem is due to the combination of two facts:
1) The above CREATE TABLE SELECT statement uses the display
width of the result of DIV operation as the display width
of the column created without validating the width for out
of bound condition.
2) The DIV operation incorrectly returns the length of its first
argument as the display width of its result; thus allowing
creation of a table with an incorrect display width of 3000
for the field.
Fix:
----
This fix changes the DIV operation implementation to correctly
evaluate the display width of its result. We check if DIV's
results estimated width crosses maximum width for integer
value (21) and if yes set it to this maximum value.
This patch also fixes fixes maximum display width evaluation
for DIV function when its first argument is in UCS2.
WRITTEN WHILE ROWS REMAINS
Problem:
========
When truncate table fails while using transactional based
engines even though the operation errors out we still
continue and log it to binlog. Because of this master has
data but the truncate will be written to binary log which
will cause inconsistency.
Analysis:
========
Truncate table can happen either through drop and create of
table or by deleting rows. In the second case the existing
code is written in such a way that even if an error occurs
the truncate statement will always be binlogged. Which is not
correct.
Binlogging of TRUNCATE TABLE statement should check whether
truncate is executed "transactionally or not". If the table
is transaction based we log the TRUNCATE TABLE only on
successful completion.
If table is non transactional there are possibilities that on
error we could have partial changes done hence in such cases
we do log in spite of errors as some of the lines might have
been removed, so the statement has to be sent to slave.
Fix:
===
Using table handler whether truncate table is being executed
in transaction based mode or not is identified and statement
is binlogged accordingly.
mysql-test/suite/binlog/r/binlog_truncate_kill.result:
Added test case to test the fix for Bug#17942050.
mysql-test/suite/binlog/t/binlog_truncate_kill.test:
Added test case to test the fix for Bug#17942050.
sql/sql_truncate.cc:
Check if truncation is successful or not and retun appropriate
return values so that binlogging can be done based on that.
sql/sql_truncate.h:
Added a new enum.
- Table locks now ends with state "After table lock"
- Open table now ends with state "After opening tables"
- All calls to close_thread_tables(), not only from mysql_execute_command(), has state "closing tables"
- Added state "executing" for mysql admin commands, like CACHE INDEX, REPAIR TABLE etc.
- Added state "Finding key cache" for CACHE INDEX
- Added state "Filling schema table" when we generate temporary table for SHOW commands and information schema.
Other things:
Add limit from innobase for thread_sleep_delay. This fixed a failing tests case.
Added db.opt to support-files to make 'make package' work
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Use new state
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated test result because of new state
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated test result because of new state
sql/CMakeLists.txt:
Have option files in support-files
sql/lock.cc:
Added new state 'After table lock'
sql/sql_admin.cc:
Added state "executing" and "Sending data" for mysql admin commands, like CACHE INDEX, REPAIR TABLE etc.
Added state "Finding key cache"
sql/sql_base.cc:
open tables now ends with state "After table lock", instead of NULL
sql/sql_parse.cc:
Moved state "closing tables" to close_thread_tables()
sql/sql_show.cc:
Added state "Filling schema table" when we generate temporary table for SHOW commands and information schema.
storage/xtradb/buf/buf0buf.c:
Removed compiler warning
storage/xtradb/handler/ha_innodb.cc:
Add limit from innobase for thread_sleep_delay. This fixed a failing tests case.
support-files/db.opt:
cmakes needs this to create data/test directory
The fill_schema_table() function used to call get_table_share() for a table name in WHERE
then clear the error list. That way plugins receive the superfluous error notification if it
happens in it. Also the problem was that error handler didn't prevent the suppressed
error message from logging anyway as the logging happens in THD::raise_condition
before the handler call.
Trigger_error_handler is remade into Warnings_only_error_handler, so it stores the error
message in all cases in the thd->stmt_da.
Then later the stored error is raised.
The reason was that a couple of variables that hold number of rows that was used to calculate buffers was uint and caused an overflow.
Fixed by changing variables that could hold number of rows from uint to ulong and also added a cast for this test.
include/heap.h:
Reorder to get better alignment. Changed variables that could hold number of rows from uint to ulong
mysql-test/suite/heap/heap.result:
Added test case
mysql-test/suite/heap/heap.test:
Added test case
mysql-test/suite/plugins/t/server_audit.test:
Added sleep as we want to have disconnect logged before we try a new connect
storage/heap/ha_heap.cc:
Changed variables that could hold number of rows from uint to ulong
Limit number of rows to 4G (as most of the variables that holds rows are ulong anyway)
reset records_changed when key_stat_version is changed to not cause increments for every row changed
storage/heap/ha_heap.h:
changed records_changed to ulong as this can get big
storage/heap/hp_create.c:
Changed variables that could hold number of rows from uint to ulong
Added cast (fixed the original bug)
storage/heap/hp_delete.c:
Changed variables that could hold number of rows from uint to ulong
storage/heap/hp_open.c:
Removed not needed cast
storage/heap/hp_write.c:
Changed variables that could hold number of rows from uint to ulong
support-files/compiler_warnings.supp:
Removed extra : from supression
