flush_cached_records() was not correctly checking for errors after calling
Item::val_xxx() methods. The expressions may contain subqueries
or stored procedures that cause errors that should stop the statement.
Fixed by correctly checking for errors and propagating them up the call stack.
Bug #49984 Test 'rpl_loaddata_symlink' fails with "Could not find target log"
Sometimes the symbolic link is available on Windows if
you have some Unix (emulation) layer installed like
Cygwin, MKS or other. But symbolic link is not always
available. It depends on versions, file volume and
system environment of Windows. And the symbolic link
is not typically used on Windows, at least not in the
degree and style they are used on Unix. We can not
change the test case to do without symbolic link,
because the test case is used to test that if the
symbolic link works fine.
To fix the problem, skip the test on windows.
error in the query.
Fixes a leak after materializing a GROUP BY subquery to a
temp table when the subquery has a blob column in the SELECT
list.
Fixed by correctly destructing temporary buffers for re-usable
queries
When @@session.binlog_format is modified inside a transaction,
it can cause slave to go out of sync.
To fix the problem, make the session variable 'binlog_format'
read-only inside a transaction.
Problem was when calculating the range of partitions for
pruning.
Solution was to get the calculation correct. I also simplified
it a bit for easier understanding.
to string conversions and vice versa"
Initial import of the dtoa.c code and custom wrappers around it
to allow its usage from the server code.
Conversion of FLOAT/DOUBLE values to DECIMAL ones or strings
and vice versa has been significantly reworked. As the new
algoritms are more precise than the older ones, results of such
conversions may not always match those obtained from older
server versions. This in turn may break compatibility for some
applications.
This patch also fixes the following bugs:
- bug #12860 "Difference in zero padding of exponent between
Unix and Windows"
- bug #21497 "DOUBLE truncated to unusable value"
- bug #26788 "mysqld (debug) aborts when inserting specific
numbers into char fields"
- bug #24541 "Data truncated..." on decimal type columns
without any good reason"
"HANDLER statements within a transaction might lead to deadlocks".
Introduce a notion of a sentinel to MDL_context. A sentinel
is a ticket that separates all tickets in the context into two
groups: before and after it. Currently we can have (and need) only
one designated sentinel -- it separates all locks taken by LOCK
TABLE or HANDLER statement, which must survive COMMIT and ROLLBACK
and all other locks, which must be released at COMMIT or ROLLBACK.
The tricky part is maintaining the sentinel up to date when
someone release its corresponding ticket. This can happen, e.g.
if someone issues DROP TABLE under LOCK TABLES (generally,
see all calls to release_all_locks_for_name()).
MDL_context::release_ticket() is modified to take care of it.
******
A fix and a test case for Bug#46224 "HANDLER statements within a
transaction might lead to deadlocks".
An attempt to mix HANDLER SQL statements, which are transaction-
agnostic, an open multi-statement transaction,
and DDL against the involved tables (in a concurrent connection)
could lead to a deadlock. The deadlock would occur when
HANDLER OPEN or HANDLER READ would have to wait on a conflicting
metadata lock. If the connection that issued HANDLER statement
also had other metadata locks (say, acquired in scope of a
transaction), a classical deadlock situation of mutual wait
could occur.
Incompatible change: entering LOCK TABLES mode automatically
closes all open HANDLERs in the current connection.
Incompatible change: previously an attempt to wait on a lock
in a connection that has an open HANDLER statement could wait
indefinitely/deadlock. After this patch, an error ER_LOCK_DEADLOCK
is produced.
The idea of the fix is to merge thd->handler_mdl_context
with the main mdl_context of the connection, used for transactional
locks. This makes deadlock detection possible, since all waits
with locks are "visible" and available to analysis in a single
MDL context of the connection.
Since HANDLER locks and transactional locks have a different life
cycle -- HANDLERs are explicitly open and closed, and so
are HANDLER locks, explicitly acquired and released, whereas
transactional locks "accumulate" till the end of a transaction
and are released only with COMMIT, ROLLBACK and ROLLBACK TO SAVEPOINT,
a concept of "sentinel" was introduced to MDL_context.
All locks, HANDLER and others, reside in the same linked list.
However, a selected element of the list separates locks with
different life cycle. HANDLER locks always reside at the
end of the list, after the sentinel. Transactional locks are
prepended to the beginning of the list, before the sentinel.
Thus, ROLLBACK, COMMIT or ROLLBACK TO SAVEPOINT, only
release those locks that reside before the sentinel. HANDLER locks
must be released explicitly as part of HANDLER CLOSE statement,
or an implicit close.
The same approach with sentinel
is also employed for LOCK TABLES locks. Since HANDLER and LOCK TABLES
statement has never worked together, the implementation is
made simple and only maintains one sentinel, which is used either
for HANDLER locks, or for LOCK TABLES locks.
Several problems fixed :
1. Non constant expressions in UNION ... ORDER BY were not correctly cleaned up
in st_select_lex_unit::cleanup() causing crashes in EXPLAIN EXTENDED because of
fields quoted by these expressions pointing to the already freed temporary table
used to calculate the UNION.
Fixed by correctly cleaning up expressions of any depth.
2. Subqueries in the order by part of UNION ... ORDER BY ... caused a crash in
EXPLAIN EXTENDED because of a transformation attempt made during EXPLAIN EXTENDED
execution. Fixed by not doing the transformation when in EXPLAIN.
3. Fulltext functions caused crash when in the ORDER BY part of an un-parenthesized
UNION that gets "promoted" to be valid for the whole union, e.g.
SELECT * FROM t1 UNION SELECT * FROM t2 ORDER BY MATCHES (a) AGAINST ('abc' IN BOOLEAN MODE).
This is a case that demonstrates a more general problem of parts of the query being
moved to another level. When doing such transformation late in the optimization run
when most of the flags about the contents of the query are already aggregated it's possible
to "split" the flags so that they correctly reflect the new queries after the transformation.
In specific the ST_SELECT_LEX::ftfunc_list is holding all the free text function for all the
parts of the second SELECT in the UNION and we don't know what part of that is in the ORDER BY
that we're to move to the UNION level and what part is about the other parts of the second SELECT.
Fixed by throwing and error when such statements are about to be processed by adding a check
for the presence of MATCH() inside the ORDER BY clause that's going to get promoted to UNION.
To workaround this new limitation one must parenthesize the UNION SELECTs and provide a real
global ORDER BY for the UNION outside of the parenthesis.
This patch fixes these warnings and some compile time warnings.
On top of that, it also fixes rpl_err_ignoredtable test failure.
This test was failing because the warning suppression text was not
matching the latest text. We fix this by making them match.
At the end of execution top level join execution
we cleanup this join with true argument.
It leads to underlying join cleanup(subquery) with true argument too
and to tmp_table_param->field array cleanup which is required later.
The problem is that Item_func_set_user_var does not set
result_filed which leads to unnecessary repeated excution of subquery
on final stage.
The fix is to set result_field for Item_func_set_user_var.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
on re-execution of prepared statement
Problem: some (see eq_ref_table()) ORDER BY/GROUP BY optimization
is called before each PS execution. However, we don't properly
initialize its stucture every time before the call.
Fix: properly initialize the sturture used.
Bug#49836 reports that the geometry type does not work
with WL#5151 applied.
The GEOMETRY type inherits the blob comparison function,
which read the pack length from the metadata. The GEOMETRY
type does not fill in the metadata with anything sensible,
so it is always zero, meaning that the pack length for the
source type is considered zero, rendering it always "smaller"
than the target type which has pack length 4 (without pointer).
This patch fixes the problem by defining
Field_geom::pack_length_from_metadata() to always use the
same as Field_geom::row_pack_length().
When the $diff_statement variable for diff_master_slave.inc was
put in multiple lines, the rear part of the statement would be
missing when being executed on Windows systems.
Fixed the problem by always putting the value for $diff_statement
in one line.
