bzr merge lp:maria/5.5 -rtag:mariadb-5.5.31
Text conflict in cmake/cpack_rpm.cmake
Text conflict in debian/dist/Debian/control
Text conflict in debian/dist/Ubuntu/control
Text conflict in sql/CMakeLists.txt
Conflict adding file sql/db.opt. Moved existing file to sql/db.opt.moved.
Conflict adding file sql/db.opt.moved. Moved existing file to sql/db.opt.moved.moved.
Text conflict in sql/mysqld.cc
Text conflict in support-files/mysql.spec.sh
8 conflicts encountered.
SHOW ENGINE INNOD
Problem:
The purpose of explain_filename() is to provide useful additional
information regarding the partitions given the filename. This function
was returning an error when it was not able to parse the given filename.
For example, within InnoDB, temporary files are created with #sql-
prefix. But this function was not able to parse it correctly.
Solution:
It is not an error, if explain_filename() could not parse the given
filename. If there is no partition information to explain, then silently
return from the function.
rb#1940 approved by mattiasj
sql/sql_table.cc:
Don't call allow_access_to_protected_table() if we haven't protected table against usage.
Table is mainly protected against usage when one disables keys with alter table.
sql/sql_table.cc:
Remove version protection from share when repair has been done.
Without this one can't run SHOW commands on the table if it was locked until it's unlocked.
sql/table.h:
Allow one to remove version protection with allow_access_to_protected_table()
The issue was that there was that SHOW commands could open the table in the store engine, even in cases
where it should not be allowed to do that (ie, the storage engines meta data for that table was under big changes).
The cases where this should not be allowed are:
- ALTER TABLE DISABLE KEYS
- ALTER TABLE ENABLE KEYS
- REPAIR TABLE
- OPTIMIZE TABLE
- DROP TABLE
This patch adds a new mode, protected_against_usage(). If this is used then the SHOW command will wait until the table
is accessable. This is implemented by re-using the already exising 'version' flag for TABLE_SHARE.
It also added functions to be used to change TABLE_SHARE->version instead of changing it directly.
mysql-test/r/myisam-metadata.result:
Added test case
mysql-test/t/myisam-metadata.test:
Added test case
sql/mysqld.cc:
Start from refresh_version 2 as 0 and 1 are reserved.
sql/sql_admin.cc:
Added MYSQL_OPEN_FOR_REPAIR
Updated call to wait_while_table_is_used()
sql/sql_base.cc:
Updated call to wait_while_table_is_used()
- Allow one to specify how the table should be removed (for all commands except show or for all commands).
- Don't allow one to reopen the table if one has called share->protect_against_usage()
sql/sql_base.h:
Added TDC_RT_REMOVE_NOT_OWN_AND_MARK_NOT_USABLE, which is used to mark that no one can reopen this table, except with MYSQL_OPEN_FOR_REPAIR .
- Added MYSQL_OPEN_FOR_REPAIR
- Updated prototype for wait_while_table_is_used()
sql/sql_table.cc:
Updated call to wait_while_table_is_used()
Use MYSQL_OPEN_FOR_REPAIR for open tables that where repaired.
sql/sql_truncate.cc:
Updated call to wait_while_table_is_used()
sql/table.cc:
Use set_refresh_version()
sql/table.h:
Added functions to be used to change TABLE_SHARE->version instead of changing it directly
mysys/errors.c:
revert upstream's fix. use a much simpler one
mysys/my_write.c:
revert upstream's fix. use a simpler one
sql/item_xmlfunc.cc:
useless, but ok
sql/mysqld.cc:
simplify upstream's fix
storage/heap/hp_delete.c:
remove upstream's fix.
we'll use a much less expensive approach.
DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
mysql-test/r/create.result:
Updated test results
mysql-test/t/create.test:
Updated test
sql/sql_base.cc:
Use push_internal_handler/pop_internal_handler to avoid errors & warnings instead of clear_error
Give a warnings instead of an error for CREATE TABLE IF EXISTS
sql/sql_parse.cc:
Check if we failed because of table exists (can only happen from create)
sql/sql_table.cc:
Check if we failed because of table exists (can only happen from create)
If triggers are used for an insert/update/delete statement than the values of
all virtual columns must be computed as any of them may be used by the triggers.
PROBLEM
-------
optimize on partiton will recreate the whole table
instead of just partition.
ANALYSIS
--------
At present innodb doesn't support optimize option ,so we do a rebuild of the
whole table and then call analyze() on the table.Presently for any optimize()
option (on table or partition) we display the following info to the user
"Table does not support optimize, doing recreate + analyze instead".
FIX
---
It was decided for GA versions(5.1 and 5.5) whenever the user tries to
optimize a partition(s) we will will display the following info the user
"Table does not support optimize on partitions.
All partitions will be rebuilt and analyzed."
Earlier partitions were not analyzed.Now all partitions will be analyzed.
If the user wants to optimize the whole table ,we will display the
previous info to the user. i.e
"Table does not support optimize, doing recreate + analyze instead"
For 5.6+ versions we will raise a new bug to support optimize() options
in innodb.
FAILED IN DEACTIVATE_DDL_LOG_ENTRY
deallocate_ddl_log_entry() can be called without having
locked LOCK_gdl. It uses a global buffer for reading and
writing entries in the ddl_log, and since it is not protected
by any mutex, two concurrent threads can overwrite the
content in the global buffer, so it can be different from
what was read.
Thread a reads from entry 1 into global
buffer, thread b reads from entry 2 into global buffer,
thread a writes from global buffer into entry 1
-> entry 1 is not the content of entry 2.
This is especially bad for replace entries, which uses
two phases, and does not deactivate the whole entry
after the first phase, but increases the phase instead.
Fixed by using thread local storage (stack) instead of global
storage (global buffer).
Also added buffer and size arguments to
read/write_ddl_log_file_entry.
Also only read/write first bytes in entries in
deactivate_ddl_log_entry.
Also fixed the scenario where it will try to recover from a server
compiled with a different value of IO_SIZE (very uncommon!)
updated patch with set_ddl_log_entry_from_buf
and removed read_ddl_log_entry.
Manually tested, no test case included.
QUOTING IN REPLICATION
Problem: Misquoting or unquoted identifiers may lead to
incorrect statements to be logged to the binary log.
Fix: we use specialized functions to append quoted identifiers in
the statements generated by the server.
create table t1 (a smallint primary key auto_increment);
insert into t1 values(32767);
insert into t1 values(NULL);
ERROR 1062 (23000): Duplicate entry '32767' for key 'PRIMARY
Now on always gets error HA_ERR_AUTOINC_RANGE=167 "Out of range value for column", independent of
store engine, SQL Mode or number of inserted rows. This is an unique error that is easier to test for in replication.
Another bug fix is that we now get an error when trying to insert a too big auto-generated value, even in non-strict mode.
Before one get insted the max column value inserted.
This patch also fixes some issues with inserting negative numbers in an auto-increment column.
Fixed the ER_DUP_ENTRY and HA_ERR_AUTOINC_ERANGE are compared the same between master and slave.
This ensures that replication works between an old server to a new slave for auto-increment overflow errors.
Added SQLSTATE errors for handler errors
Smaller bug fixes:
* Added warnings for duplicate key errors when using INSERT IGNORE
* Fixed bug when using --skip-log-bin followed by --log-bin, which did set log-bin to "0"
* Allow one to see how cmake is called by using --just-print --just-configure
BUILD/FINISH.sh:
--just-print --just-configure now shows how cmake would be invoked. Good for understanding parameters to cmake.
cmake/configure.pl:
--just-print --just-configure now shows how cmake would be invoked. Good for understanding parameters to cmake.
include/CMakeLists.txt:
Added handler_state.h
include/handler_state.h:
SQLSTATE for handler error messages.
Required for HA_ERR_AUTOINC_ERANGE, but solves also some other cases.
mysql-test/extra/binlog_tests/binlog.test:
Fixed old wrong behaviour
Added more tests
mysql-test/extra/binlog_tests/binlog_insert_delayed.test:
Reset binary log to only print what's necessary in show_binlog_events
mysql-test/extra/rpl_tests/rpl_auto_increment.test:
Update to new error codes
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Ignore warnings as this depends on how the test is run
mysql-test/include/strict_autoinc.inc:
On now gets an error on overflow
mysql-test/r/auto_increment.result:
Update results after fixing error message
mysql-test/r/auto_increment_ranges_innodb.result:
Test new behaviour
mysql-test/r/auto_increment_ranges_myisam.result:
Test new behaviour
mysql-test/r/commit_1innodb.result:
Added warnings for duplicate key error
mysql-test/r/create.result:
Added warnings for duplicate key error
mysql-test/r/insert.result:
Added warnings for duplicate key error
mysql-test/r/insert_select.result:
Added warnings for duplicate key error
mysql-test/r/insert_update.result:
Added warnings for duplicate key error
mysql-test/r/mix2_myisam.result:
Added warnings for duplicate key error
mysql-test/r/myisam_mrr.result:
Added warnings for duplicate key error
mysql-test/r/null_key.result:
Added warnings for duplicate key error
mysql-test/r/replace.result:
Update to new error codes
mysql-test/r/strict_autoinc_1myisam.result:
Update to new error codes
mysql-test/r/strict_autoinc_2innodb.result:
Update to new error codes
mysql-test/r/strict_autoinc_3heap.result:
Update to new error codes
mysql-test/r/trigger.result:
Added warnings for duplicate key error
mysql-test/r/xtradb_mrr.result:
Added warnings for duplicate key error
mysql-test/suite/binlog/r/binlog_innodb_row.result:
Updated result
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Out of range data for auto-increment is not inserted anymore
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
Updated result
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Out of range data for auto-increment is not inserted anymore
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result
mysql-test/suite/innodb/r/innodb-autoinc.result:
Update to new error codes
mysql-test/suite/innodb/r/innodb-lock.result:
Updated results
mysql-test/suite/innodb/r/innodb.result:
Updated results
mysql-test/suite/innodb/r/innodb_bug56947.result:
Updated results
mysql-test/suite/innodb/r/innodb_mysql.result:
Updated results
mysql-test/suite/innodb/t/innodb-autoinc.test:
Update to new error codes
mysql-test/suite/maria/maria3.result:
Updated result
mysql-test/suite/maria/mrr.result:
Updated result
mysql-test/suite/optimizer_unfixed_bugs/r/bug43617.result:
Updated result
mysql-test/suite/rpl/r/rpl_auto_increment.result:
Update to new error codes
mysql-test/suite/rpl/r/rpl_insert_delayed,stmt.rdiff:
Updated results
mysql-test/suite/rpl/r/rpl_loaddatalocal.result:
Updated results
mysql-test/t/auto_increment.test:
Update to new error codes
mysql-test/t/auto_increment_ranges.inc:
Test new behaviour
mysql-test/t/auto_increment_ranges_innodb.test:
Test new behaviour
mysql-test/t/auto_increment_ranges_myisam.test:
Test new behaviour
mysql-test/t/replace.test:
Update to new error codes
mysys/my_getopt.c:
Fixed bug when using --skip-log-bin followed by --log-bin, which did set log-bin to "0"
sql/handler.cc:
Ignore negative values for signed auto-increment columns
Always give an error if we get an overflow for an auto-increment-column (instead of inserting the max value)
Ensure that the row number is correct for the out-of-range-value error message.
******
Fixed wrong printing of column namn for "Out of range value" errors
Fixed that INSERT_ID is correctly replicated also for out-of-range autoincrement values
Fixed that print_keydup_error() can also be used to generate warnings
******
Return HA_ERR_AUTOINC_ERANGE (167) instead of ER_WARN_DATA_OUT_OF_RANGE for auto-increment overflow
sql/handler.h:
Allow INSERT IGNORE to continue also after out-of-range inserts.
Fixed that print_keydup_error() can also be used to generate warnings
sql/log_event.cc:
Added DBUG_PRINT
Fixed the ER_AUTOINC_READ_FAILED, ER_DUP_ENTRY and HA_ERR_AUTOINC_ERANGE are compared the same between master and slave.
This ensures that replication works between an old server to a new slave for auto-increment overflow errors.
sql/sql_insert.cc:
Add warnings for duplicate key errors when using INSERT IGNORE
sql/sql_state.c:
Added handler errors
sql/sql_table.cc:
Update call to print_keydup_error()
storage/innobase/handler/ha_innodb.cc:
Fixed increment handling of auto-increment columns to be consistent with rest of MariaDB.
storage/xtradb/handler/ha_innodb.cc:
Fixed increment handling of auto-increment columns to be consistent with rest of MariaDB.
bzr merge lp:maria/5.5
...
Text conflict in CMakeLists.txt
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_truncate.cc
4 conflicts encountered.
Increment long_query_count also if thd->variables.log_slow_rate_limit is used
Added new state "Writing to binlog"
sql/sql_class.h:
Added THD::utime_after_query to avoid calling current_utime() twice for every end-of-query
sql/sql_parse.cc:
Increment long_query_count also if thd->variables.log_slow_rate_limit is used
Removed extra calls to thd_proc_info(thd, "logging slow query") and thd->current_utime();
sql/sql_table.cc:
Added new state "Writing to binlog"
mysql-test/suite/maria/lock.result:
Added test case
mysql-test/suite/maria/lock.test:
Added test case
sql/sql_table.cc:
One can't call HA_EXTRA_FORCE_REOPEN on something that may be opened twice.
It's safe to remove the call in this case as we will call HA_EXTRA_PREPARE_FOR_DROP for the table anyway.
(One nice side effect is that drop is a bit faster as we are not flushing the cache to disk before the drop anymore)
mysql-test/r/partition.result:
Added test case
mysql-test/t/partition.test:
Added test case
sql/sql_partition.cc:
Do mysql_trans_prepare_alter_copy_data() after all original tables are locked.
(We don't want to disable transactions for the original tables, that still may be in the cache)
sql/sql_table.cc:
Fixed two wrong DBUG_ENTER
client/mysqldump.c:
Slave needs to be initialized with 0
dbug/dbug.c:
Removed not existing function
plugin/semisync/semisync_master.cc:
Fixed compiler warning
sql/opt_range.cc:
thd needs to be set early as it's used in some error conditions.
sql/sql_table.cc:
Changed to use uchar* to make array indexing portable
storage/innobase/handler/ha_innodb.cc:
Removed not used variable
storage/maria/ma_delete.c:
Fixed compiler warning
storage/maria/ma_write.c:
Fixed compiler warning
fix add_identifier() to distinguish between temporary tables (#sql- prefix) and temporary partitions (#TMP# suffix).
change add_identifier() to use the same name variant constants as sql_partition.cc does.
