fails after the first time
Two separate problems :
1. When flattening joins the linked list used for name resolution
(next_name_resolution_table) was not updated.
Fixed by updating the pointers when extending the table list
2. The items created by expanding a * (star) as a column reference
were marked as fixed, but no cached table was assigned to them
(unlike what Item_field::fix_fields does).
Fixed by assigning a cached table (so the re-preparation is done
faster).
Note that the fix for #2 hides the fix for #1 in most cases
(except when a table reference cannot be cached).
mysql-test/r/sp.result:
Bug #33811: test case
mysql-test/t/sp.test:
Bug #33811: test case
sql/sql_base.cc:
Bug #33811: cache the table for Item_fields created by expanding '*'
sql/sql_select.cc:
Bug #33811: maintain a correct name resolution chain when
flattening joins.
The problem is that field names constructed due to wild-card
expansion done inside a stored procedure could point to freed
memory if the expansion was performed after the first call to
the stored procedure.
The problem was solved by patch for Bug#38691. The solution
was to allocate the database, table and field names in the
in the statement memory instead of table memory.
mysql-test/r/sp.result:
Add test case result for Bug#38823
mysql-test/t/sp.test:
Add test case for Bug#38823
sql/item.cc:
Remark that this also impacts wildcard expansion inside SPs.
A stored procedure involving substrings could crash the server on certain
platforms because of invalid memory reads.
During storing the new blob-field value, the cached value's address range
overlapped that of the new field value. This caused problems when the
cached value storage was reallocated to provide access for a new
characater set representation. The patch checks the address ranges, and if
they overlap, the new field value is copied to a new storage before it is
converted to the new character set.
mysql-test/r/sp.result:
Added result set
mysql-test/t/sp.test:
Added test case
sql/field.cc:
The source and destination address ranges of a character conversion must not overlap or the 'from' address will be invalidated as the temporary value-
object is re-allocated to fit the new character set.
sql/field.h:
Added comments
Send_field.org_col_name has broken value on secondary execution.
It happens when result field is created from the field which belongs to view
due to forgotten assignment of some Send_field attributes.
The fix:
set Send_field.org_col_name,org_table_name with correct value during Send_field intialization.
mysql-test/r/metadata.result:
result fix
The result file was changed because now forgotten attributes are properly set.
mysql-test/r/sp.result:
test result
mysql-test/t/sp.test:
test case
sql/item.cc:
Send_field.org_col_name has broken value on secondary execution.
It happens when result field is created from the field which belongs to view
due to forgotten assignment of some Send_field attributes.
The fix:
set Send_field.org_col_name,org_table_name with correct value during Send_field intialization.
tests/mysql_client_test.c:
test case fix
The test was changed because now forgotten attributes are properly set.
into kaamos.(none):/data/src/opt/mysql-5.0-opt
mysql-test/r/variables.result:
Auto merged
mysql-test/t/variables.test:
Auto merged
sql/item.cc:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
mysql-test/r/sp.result:
Manual merge.
mysql-test/t/sp.test:
Manual merge.
Simple subselects are pulled into upper selects. This operation substitutes the
pulled subselect for the first item from the select list of the subselect.
If an alias is defined for a subselect it is inherited by the replacement item.
As this is done after fix_fields phase this alias isn't showed if the
replacement item is a stored function. This happens because the Item_func_sp::make_field
function makes send field from its result_field and ignores the defined alias.
Now when an alias is defined the Item_func_sp::make_field function sets it for
the returned field.
mysql-test/t/sp.test:
Added a test case for the bug#30787: Stored function ignores user defined alias.
mysql-test/r/sp.result:
Added a test case for the bug#30787: Stored function ignores user defined alias.
sql/item_func.cc:
Bug#30787: Stored function ignores user defined alias.
Now when an alias is defined the Item_func_sp::make_field function sets it for
the returned field.
into lambda.hsd1.co.comcast.net.:/home/malff/TREE/mysql-5.0-33618
mysql-test/t/sp.test:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
The server used to crash when REPEAT or another control instruction
was used in conjunction with labels and a LEAVE instruction.
The crash was caused by a missing "pop" of handlers or cursors in the
code representing the stored program. When executing the code in a loop,
this missing "pop" would result in a stack overflow, corrupting memory.
Code generation has been fixed to produce the missing h_pop/c_pop
instructions.
Also, the logic checking that labels at the beginning and the end of a
statement are matched was incorrect, causing Bug 33983.
End labels, when used, must match the label used at the beginning of a block.
mysql-test/r/sp-code.result:
Bug#33618 (Crash in sp_rcontext)
mysql-test/r/sp-error.result:
Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
mysql-test/r/sp.result:
Bug#33618 (Crash in sp_rcontext)
mysql-test/t/sp-code.test:
Bug#33618 (Crash in sp_rcontext)
mysql-test/t/sp-error.test:
Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
mysql-test/t/sp.test:
Bug#33618 (Crash in sp_rcontext)
sql/sp_head.cc:
Bug#33618 (Crash in sp_rcontext)
sql/sp_head.h:
Bug#33618 (Crash in sp_rcontext)
sql/sp_rcontext.cc:
Bug#33618 (Crash in sp_rcontext)
sql/sp_rcontext.h:
Bug#33618 (Crash in sp_rcontext)
sql/sql_yacc.yy:
Bug#33618 (Crash in sp_rcontext)
into bodhi.(none):/opt/local/work/mysql-5.0-runtime
mysql-test/r/sp.result:
Auto merged
mysql-test/t/sp.test:
Auto merged
sql/sql_parse.cc:
Auto merged
This actually, fix for the patch for bug-27354. The problem with
the patch was that Item_func_sp::used_tables() was updated, but
Item_func_sp::const_item() was not. So, for Item_func_sp, we had
the following inconsistency:
- used_tables() returned RAND_TABLE, which means that the item
can produce "random" results;
- but const_item() returned TRUE, which means that the item is
a constant one.
The fix is to change Item_func_sp::const_item() behaviour: it must
return TRUE (an item is a constant one) only if a stored function
is deterministic and each of its arguments (if any) is a constant
item.
mysql-test/r/sp.result:
Update result file.
mysql-test/t/sp.test:
Add test cases for BUG-31035, BUG-31191, BUG-31226
sql/item_func.cc:
Make Item::const_item() be consistent with Item::used_tables().
into weblab.(none):/home/marcsql/TREE/mysql-5.0-rt-merge
mysql-test/r/sp.result:
Auto merged
mysql-test/t/mysql.test:
Auto merged
mysql-test/t/sp.test:
Auto merged
Use view db name as thread default database, in order to ensure
that the view is parsed and prepared correctly.
mysql-test/r/sp.result:
test result
mysql-test/t/sp.test:
test case
sql/sql_parse.cc:
copy thd->db_length to table_list->db_length
sql/sql_view.cc:
Use view db name as thread default database, in order to ensure
that the view is parsed and prepared correctly.
seems to be converted as varbinary.
The bug has been already fixed. This CS just adds a test case for it.
mysql-test/r/sp.result:
Update result file.
mysql-test/t/sp.test:
Test case for BUG#13675.
SP with local variables with non-ASCII names crashed the server.
The server replaces SP local variable names with NAME_CONST calls
when putting statements into the binary log. It used UTF8-encoded
item names as variable names for the replacement inside NAME_CONST
calls. However, statement string may be encoded by any
known character set by the SET NAMES statement.
The server used byte length of UTF8-encoded names to increment
the position in the query string that led to array index overrun.
sql/item.cc:
Fixed bug #30120.
The Item_splocal class constructor has been modified to
accept new parameter `len_in_q': the byte length of
variable name in the query string.
sql/item.h:
Fixed bug #30120.
The Item_splocal class has been modified to keep new
field `len_in_query': the byte length of variable name in
the query string.
sql/sp_head.cc:
Fixed bug #30120.
The subst_spvars function has been modified to increment
position in the query string by the lengths of not
encoded variable names instead of byte length of names
encoded to UTF-8.
sql/sql_yacc.yy:
Fixed bug #30120.
The simple_ident rule action has been modified to
pass the byte length of the local variable name token
to the Item_splocal object constructor.
mysql-test/t/sp.test:
Updated test case for bug #30120.
mysql-test/r/sp.result:
Updated test case for bug #30120.
into gleb.loc:/home/uchum/work/bk/5.0-opt
sql/sql_base.cc:
Auto merged
mysql-test/r/sp.result:
Merge with local tree.
mysql-test/t/sp.test:
Merge with local tree.
Using view columns by their names during an execution of
a prepared SELECT statement or a SELECT statement inside
a SP caused a memory leak.
sql/sql_base.cc:
Fixed bug #29834.
The find_field_in_view function has been modified to
use the execution memory root for the Item_direct_view_ref
objects allocation at non-first executions of
a PS/SP instead of the statement memory.
mysql-test/t/sp.test:
Updated test case for bug #29834.
mysql-test/r/sp.result:
Updated test case for bug #29834.
Additional test case fix for bug #29338.
mysql-test/t/sp.test:
Additional test case fix for bug #29338.
mysql-test/r/sp.result:
Additional test case fix for bug #29338.
Optimization of queries with DETERMINISTIC functions in the
WHERE clause was not effective: sequential scan was always
used.
Now a SF with the DETERMINISTIC flags is treated as constant
when it's arguments are constants (or a SF doesn't has arguments).
sql/item_func.h:
Fixed bug #29338.
The Item_func_sp::used_tables has been removed
(virtual Item_func::used_tables function is enough).
The virtual Item_func_sp::update_used_tables function
has been added.
sql/item_func.cc:
Fixed bug #29338.
The Item_func_sp::update_used_tables and the
Item_func_sp::fix_field functions have been modified
to take into account the DETERMINISTIC flag of SF definition.
mysql-test/r/sp.result:
Updated test case for bug #29338.
mysql-test/t/sp.test:
Updated test case for bug #29338.
into bodhi.(none):/opt/local/work/mysql-5.0-runtime
mysql-test/t/sp.test:
Auto merged
sql/item.h:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_show.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
mysql-test/r/innodb_mysql.result:
Manual merge.
mysql-test/t/innodb_mysql.test:
Manual merge.
fails if a database is not selected prior.
The problem manifested itself when a user tried to
create a routine that had non-fully-qualified identifiers in its bodies
and there was no current database selected.
This is a regression introduced by the fix for Bug 19022:
The patch for Bug 19022 changes the code to always produce a warning
if we can't resolve the current database in the parser.
In this case this was not necessary, since even though the produced
parsed tree was incorrect, we never re-use sphead
that was obtained at first parsing of CREATE PROCEDURE.
The sphead that is anyhow used is always obtained through db_load_routine,
and there we change the current database to sphead->m_db before
calling yyparse.
The idea of the fix is to resolve the current database directly using
lex->sphead->m_db member when parsing a stored routine body, when
such is present.
This patch removes the need to reset the current database
when loading a trigger or routine definition into SP cache.
The redundant code will be removed in 5.1.
mysql-test/r/sp.result:
Update test results (Bug#29050)
mysql-test/r/trigger.result:
Update results.
mysql-test/t/sp.test:
Add a test case for Bug#29050
mysql-test/t/trigger.test:
Fix wrong behavior covered with tests.
sql/sql_lex.cc:
Implement st_lex::copy_db_to().
sql/sql_lex.h:
Declare st_lex::copy_db_to().
sql/sql_parse.cc:
Use st_lex::copy_db_to() in add_table_to_list, rather than
THD::copy_db_to(). The former will use the database of the sphead,
if we're parsing a stored routine, not the default database in
THD. The default database is needed to initialize tables->db
when the database part was not explicitly specified in the identifier.
sql/sql_yacc.yy:
Use st_lex::copy_db_to() in the parser, rather than
THD::copy_db_to(). The former will use the database of the sphead,
if we're parsing a stored routine, not the default database in
THD.
'No database selected' is reported when calling stored procedures
Remove the offending warning introduced by the fix for Bug
25082
This minimal patch relies on the intrinsic knowledge of the fact that
mysql_change_db is never called with 'force_switch' set to TRUE
when such a warning may be needed:
* every stored routine belongs to a database (unlike, e.g., a
user defined function, which does not), so if we're activating the
database of a stored routine, it can never be NULL.
Therefore, this branch is never called for activation.
* if we're restoring the 'old' current database after routine
execution is complete, we should not issue a warning, since it's OK to
call a routine without having previously selected the current database.
TODO: 'force_switch' is an ambiguous flag, since we do not actually
have to 'force' the switch in case of stored routines at all.
When we activate the routine's database, we should perform
all the checks as in case of 'use db', and so we already do (in this
case 'force_switch' is unused).
When we load a routine into cache, we should not use mysql_change_db
at all, since there it's enough to call thd->reset_db(). We
do it this way for triggers, but code for routines is different (wrongly).
TODO: bugs are lurking in replication, since it bypasses mysql_change_db
and calls thd->[re_]set_db to set the current database.
The latter does not change thd->db_charset, thd->sctx->db_access
and thd->variables.collation_database (and this may have nasty side
effects).
These todo items are to be addressed in a separate patch, if at all.
mysql-test/r/sp.result:
Update results (Bug#28551)
mysql-test/t/sp.test:
Add a test case (Bug#28551)
sql/sp.cc:
Remove an obsolete comment.
Replace a check with an assert.
sql/sql_db.cc:
Remove the offending warning introduced by the fix for Bug
25082
This minimal patch relies on the intrinsic knowledge of the fact that
mysql_change_db is never called with 'force_switch' set to TRUE
when such a warning may be needed.
into bk-internal.mysql.com:/data0/bk/mysql-5.0-opt
mysql-test/r/sp.result:
Auto merged
mysql-test/t/sp.test:
Auto merged
mysql-test/t/strict.test:
Auto merged
mysql-test/t/subselect3.test:
Auto merged
sql/mysqld.cc:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_update.cc:
Auto merged
sql/sql_view.cc:
Manual merge
mysql-test/r/sp.result:
Update results.
mysql-test/t/mysql.test:
Fix a typo.
mysql-test/t/mysqltest.test:
Fix a typo.
mysql-test/t/order_by.test:
Fix a typo.
mysql-test/t/row.test:
Remove an unsupported command.
mysql-test/t/sp.test:
Fix a typo.
mysql-test/t/subselect3.test:
Fix mysqltest warnings - now it warns when sees some suspicious --
comment
longer showing SP names.
SHOW CREATE VIEW uses Item::print() methods to reconstruct the
statement text from the parse tree.
The print() method for stored procedure calls needs allocate
space to print the function's quoted name.
It was incorrectly calculating the length of the buffer needed
(was too short).
Fixed to reflect the actual space needed.
mysql-test/r/sp.result:
Bug #28605: test case
mysql-test/t/sp.test:
Bug #28605: test case
sql/item_func.cc:
Bug #28605: fixed the string length calculation
into weblab.(none):/home/marcsql/TREE/mysql-5.0-rt-merge
mysql-test/t/sp.test:
Auto merged
sql/item.cc:
Auto merged
sql/item_func.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/sql_lex.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
Before this fix, the parser would sometime change where a token starts by
altering Lex_input_string::tok_start, which later confused the code in
sql_yacc.yy that needs to capture the source code of a SQL statement,
like to represent the body of a stored procedure.
This line of code in sql_lex.cc :
case MY_LEX_USER_VARIABLE_DELIMITER:
lip->tok_start= lip->ptr; // Skip first `
would <skip the first back quote> ... and cause the bug reported.
In general, the responsibility of sql_lex.cc is to *find* where token are
in the SQL text, but is *not* to make up fake or incomplete tokens.
With a quoted label like `my_label`, the token starts on the first quote.
Extracting the token value should not change that (it did).
With this fix, the lexical analysis has been cleaned up to not change
lip->tok_start (in the case found for this bug).
The functions get_token() and get_quoted_token() now have an extra
parameters, used when some characters from the beginning of the token need
to be skipped when extracting a token value, like when extracting 'AB' from
'0xAB', for example, for a HEX_NUM token.
This exposed a bad assumption in Item_hex_string and Item_bin_string,
which has been fixed:
The assumption was that the string given, 'AB', was in fact preceded in
memory by '0x', which might be false (it can be preceded by "x'" and
followed by "'" -- or not be preceded by valid memory at all)
If a name is needed for Item_hex_string or Item_bin_string, the name is
taken from the original and true source code ('0xAB'), and assigned in
the select_item rule, instead of relying on assumptions related to how
memory is used.
mysql-test/r/sp.result:
Lex_input_stream::tok_start must point at the real start of a token.
mysql-test/t/sp.test:
Lex_input_stream::tok_start must point at the real start of a token.
sql/item.cc:
Lex_input_stream::tok_start must point at the real start of a token.
sql/sql_lex.cc:
Lex_input_stream::tok_start must point at the real start of a token.
sql/sql_yacc.yy:
Lex_input_stream::tok_start must point at the real start of a token.
mysql-test/t/sp.test:
Disable warnings during table creation in one place where engine=innodb is used, in order to make this test case work with a mysqld that was compiled without InnoDB.
into ua141d10.elisa.omakaista.fi:/home/my/bk/mysql-5.0-marvel
client/mysqldump.c:
Auto merged
mysql-test/t/sp.test:
Auto merged
mysys/my_malloc.c:
Auto merged
mysys/my_static.c:
Auto merged
mysys/safemalloc.c:
Auto merged
ndb/src/mgmclient/CommandInterpreter.cpp:
Auto merged
sql/ha_archive.cc:
Auto merged
sql/ha_innodb.cc:
Auto merged
sql/ha_ndbcluster.cc:
Auto merged
sql/handler.cc:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/item_func.h:
Auto merged
sql/log.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql-common/client.c:
Auto merged
sql/sp.cc:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_delete.cc:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_show.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_update.cc:
Auto merged
sql/table.cc:
Auto merged
sql-common/my_time.c:
Auto merged
mysql-test/r/sp.result:
Merged from main 5.0
sql/sql_load.cc:
Merged from main 5.0
execution breaks replication.
When a stored routine is executed, we switch current
database to the database, in which the routine
has been created. When the stored routine finishes,
we switch back to the original database.
The problem was that if the original database does not
exist (anymore) after routine execution, we raised an error.
The fix is to report a warning, and switch to the NULL database.
mysql-test/r/sp.result:
Updated result file.
mysql-test/t/sp.test:
Added test case for BUG#25082.
sql/mysql_priv.h:
1. Change mysql_change_db() prototype;
2. Polishing.
sql/sp.cc:
Polishing.
sql/sp_head.cc:
Polishing.
sql/sql_db.cc:
1. Polishing.
2. Fix mysql_change_db().
sql/sql_parse.cc:
Polishing.
sql/sql_show.cc:
Polishing.
- 1.84e+15 converted to unsigned bigint should be
18400000000000000000 < 18446744073709551615.
- The test will still fail on windows, and is extracted
into a new bug report.
into sergbook.mysql.com:/usr/home/serg/Abk/mysql-5.0
mysql-test/r/sp.result:
Auto merged
mysql-test/t/sp.test:
Auto merged
sql/ha_ndbcluster.cc:
Auto merged
sql/handler.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_view.cc:
Auto merged
Possible problems: function call could be eliminated from where class and only
be evaluated once; function can be evaluated during table and item setup phase which could
cause side effects not to be registered in binlog.
Fixed with introducing func_item_sp::used_tables() returning the correct table_map constant.
mysql-test/r/sp.result:
results changed
mysql-test/t/sp.test:
regression test demonstrating that function's returns match where condition
of the top-level query table.
sql/item_func.h:
private used_tables() method returning the correct table_bit with meaning the item is not
a constant
into bodhi.local:/opt/local/work/mysql-5.0-runtime
sql/field.cc:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_func.cc:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_show.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
mysql-test/r/sp.result:
SCCS merged
mysql-test/t/sp.test:
SCCS merged
- Stored procedures returning unsinged values returns signed values if
text protocol is used. The reason is that the stored proceedure item
Item_func_sp wasn't initializing the member variables properly based
on the information contained in the associated result field.
- The patch is to upon field-item association, ::fix_fields, initialize
the member variables in appropriate order.
- Field type of an Item_func_sp was hard coded to MYSQL_TYPE_VARCHAR.
This is changed to return the type of the actual result field.
- Member function name sp_result_field was refactored to the more
appropriate init_result_field.
- Member function name find_and_check_access was refactored to
sp_check_access.
mysql-test/r/sp.result:
- Added test
mysql-test/t/sp.test:
- Added test
sql/item_func.cc:
Bug#20777 Function w BIGINT UNSIGNED shows diff. behaviour with and without --ps-protocol
- Stored procedures returning unsinged values returns signed values if
text protocol is used. The reason is that the stored proceedure item
Item_func_sp wasn't initializing the member variables properly based
on the information contained in the associated result field.
- The patch is to upon field-item association, ::fix_fields, initialize
the member variables in appropriate order.
- Field type of an Item_func_sp was hard coded to MYSQL_TYPE_VARCHAR.
This is changed to to return the type of the actual result field.
- Member function name sp_result_field was refactored to the more
appropriate init_result_field.
- Member function name find_and_check_access was refactored to
sp_check_access.
sql/item_func.h:
Bug#20777 Function w BIGINT UNSIGNED shows diff. behaviour with and without --ps-protocol
- Stored procedures returning unsinged values returns signed values if
text protocol is used. The reason is that the stored proceedure item
Item_func_sp wasn't initializing the member variables properly based
on the information contained in the associated result field.
- The patch is to upon field-item association, ::fix_fields, initialize
the member variables in appropriate order.
- Field type of an Item_func_sp was hard coded to MYSQL_TYPE_VARCHAR.
This is changed to to return the type of the actual result field.
- Member function name sp_result_field was refactored to the more
appropriate init_result_field.
- Member function name find_and_check_access was refactored to
sp_check_access.
Before this fix, the parser would accept illegal code in SQL exceptions
handlers, that later causes the runtime to crash when executing the code,
due to memory violations in the exception handler stack.
The root cause of the problem is instructions within an exception handler
that jumps to code located outside of the handler. This is illegal according
to the SQL 2003 standard, since labels located outside the handler are not
supposed to be visible (they are "out of scope"), so any instruction that
jumps to these labels, like ITERATE or LEAVE, should not parse.
The section of the standard that is relevant for this is :
SQL:2003 SQL/PSM (ISO/IEC 9075-4:2003)
section 13.1 <compound statement>,
syntax rule 4
<quote>
The scope of the <beginning label> is CS excluding every <SQL schema
statement> contained in CS and excluding every
<local handler declaration list> contained in CS. <beginning label> shall
not be equivalent to any other <beginning label>s within that scope.
</quote>
With this fix, the C++ class sp_pcontext, which represent the "parsing
context" tree (a.k.a symbol table) of a stored procedure, has been changed
as follows:
- constructors have been cleaned up, so that only building a root node for
the tree is public; building nodes inside a tree is not public.
- a new member, m_label_scope, indicates if a given syntactic context
belongs to a DECLARE HANDLER block,
- label resolution, in the method find_label(), has been changed to
implement the restriction of scope regarding labels used in a compound
statement.
The actions in the parser, when parsing the body of a SQL exception handler,
have been changed as follows:
- the implementation of an exception handler (DECLARE HANDLER) now creates
explicitly a new sp_pcontext, to isolate the code inside the handler from
the containing compound statement context.
- registering exception handlers as a result occurs in the parent context,
see the rule sp_hcond_element
- the code in sp_hcond_list has been cleaned up, to avoid code duplication
In addition, the flags IN_SIMPLE_CASE and IN_HANDLER, declared in sp_head.h
have been removed, since they are unused and broken by design (as seen with
Bug 19194 (Right recursion in parser for CASE causes excessive stack usage,
limitation), representing a stack in a single flag is not possible.
Tests in sp-error have been added to show that illegal constructs are now
rejected.
Tests in sp have been added for code coverage, to show that ITERATE or LEAVE
statements are legal when jumping to a label in scope, inside the body of
an exception handler.
mysql-test/r/sp-error.result:
SQL Exception handlers define a parsing context for label resolution.
mysql-test/r/sp.result:
SQL Exception handlers define a parsing context for label resolution.
mysql-test/t/sp-error.test:
SQL Exception handlers define a parsing context for label resolution.
mysql-test/t/sp.test:
SQL Exception handlers define a parsing context for label resolution.
sql/sp_head.cc:
Minor cleanup
sql/sp_head.h:
Minor cleanup
sql/sp_pcontext.cc:
SQL Exception handlers define a parsing context for label resolution.
sql/sp_pcontext.h:
SQL Exception handlers define a parsing context for label resolution.
sql/sql_yacc.yy:
SQL Exception handlers define a parsing context for label resolution.
