There are two fill_record() functions (lines 8343 and 8618). First one
is used when there are some explicit values, the second one is used
for all implicit values. First one does update_default_fields(), the
second one did not. Added update_default_fields() call to the implicit
version of fill_record().
Use in_sum_func (and so nest_level) only in LEX to which SELECT lex belong to
Reduce usage of current_select (because it does not always point on the correct
SELECT_LEX, for example with prepare.
Change context for all classes inherited from Item_ident (was only for Item_field) in case of pushing down it to HAVING.
Now name resolution context have to have SELECT_LEX reference if the context is present.
Fixed feedback plugin stack usage.
The problem was that a PREARE followed by a non prepared statement
using DEFAULT NEXT_VALUE() could change table->next_local to point to
a not persitent memory aria. The next EXECUTE would then try to use
the wrong pointer, which could cause a crash.
Fixed by reseting the pointer to it's old value when doing EXECUTE.
The columns that are part of DEFAULT expression were not read-marked
in statements like UPDATE...SET b=DEFAULT.
The problem is `F(DEFAULT)` expression depends of the left-hand side of an
assignment. However, setup_fields accepts only right-hand side value.
Neither Item::fix_fields does.
Suchwise, b=DEFAULT(b) works fine, because Item_default_field has
information on what field it is default of:
if (thd->mark_used_columns != MARK_COLUMNS_NONE)
def_field->default_value->expr->update_used_tables();
in Item_default_value::fix_fields().
It is not reasonable to pass a left-hand side to Item:fix_fields, because
the case is rare, so the rewrite
b= F(DEFAULT) -> b= F(DEFAULT(b))
is made instead.
Both UPDATE and multi-UPDATE are affected, however any form of INSERT
is not: it marks all the fields in DEFAULT expressions for read in
TABLE::mark_default_fields_for_write().
This is a 10.2+ part of a jira task
The two bugs regarding virtual column marking have been fixed:
1. UPDATE of a partitioned table, where the optimizer has chosen a
secondary index to make a filesort;
2. INSERT into a table with a nonblob field generated from a blob, with
binlog enabled and binlog_row_image=noblob.
3. DELETE from a view on a table with virtual column.
Generally the assertion happens from update_virtual_fields() call
These bugs are root-caused by missing field marking for dependant fields
of a virtual column.
Therefore a fix is: mark all the fields involved in the vcol expression by
calling field->register_field_in_read_map() instead just setting a single
bit.
3 was reproducible only on 10.4+, however the problem might has just been
invisible in the earlier versions. The fix is applicable to 10.2-10.3 as
well.
Both EXPLAIN and EXPLAIN EXTENDED statements produce different results set
in case it is run in normal way and in PS mode for the statements
UPDATE/DELETE with subquery.
The use case below reproduces the issue:
MariaDB [test]> CREATE TABLE t1 (c1 INT KEY) ENGINE=MyISAM;
Query OK, 0 rows affected (0,128 sec)
MariaDB [test]> CREATE TABLE t2 (c2 INT) ENGINE=MyISAM;
Query OK, 0 rows affected (0,023 sec)
MariaDB [test]> CREATE TABLE t3 (c3 INT) ENGINE=MyISAM;
Query OK, 0 rows affected (0,021 sec)
MariaDB [test]> EXPLAIN EXTENDED UPDATE t3 SET c3 =
-> ( SELECT COUNT(d1.c1) FROM ( SELECT a11.c1 FROM t1 AS a11
-> STRAIGHT_JOIN t2 AS a21 ON a21.c2 = a11.c1 JOIN t1 AS a12
-> ON a12.c1 = a11.c1 ) d1 );
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| 1 | PRIMARY | t3 | ALL | NULL | NULL | NULL | NULL | 0 | 100.00 | |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | Impossible WHERE noticed after reading const tables
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
2 rows in set (0,002 sec)
MariaDB [test]> PREPARE stmt FROM
-> EXPLAIN EXTENDED UPDATE t3 SET c3 =
-> ( SELECT COUNT(d1.c1) FROM ( SELECT a11.c1 FROM t1 AS a11
-> STRAIGHT_JOIN t2 AS a21 ON a21.c2 = a11.c1 JOIN t1 AS a12
-> ON a12.c1 = a11.c1 ) d1 );
Query OK, 0 rows affected (0,000 sec)
Statement prepared
MariaDB [test]> EXECUTE stmt;
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| 1 | PRIMARY | t3 | ALL | NULL | NULL | NULL | NULL | 0 | 100.00 | |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | no matching row in const table |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
2 rows in set (0,000 sec)
The reason by that different result sets are produced is that on execution
of the statement 'EXECUTE stmt' the flag SELECT_DESCRIBE not set
in the data member SELECT_LEX::options for instances of SELECT_LEX that
correspond to subqueries used in the UPDTAE/DELETE statements.
Initially, these flags were set on parsing the statement
PREPARE stmt FROM "EXPLAIN EXTENDED UPDATE t3 SET ..."
but latter they were reset before starting real execution of
the parsed query during handling the statement 'EXECUTE stmt';
So, to fix the issue the functions mysql_update()/mysql_delete()
have been modified to set the flag SELECT_DESCRIBE forcibly
in the data member SELECT_LEX::options for the primary SELECT_LEX
of the UPDATE/DELETE statement.
The problem was that when LOCK TABLES where unwinded as part of
a killed connection, unlink_all_closed_tables() did not like that
there was uncommited transactions.
Fixed by doing a rollback of any open transaction in this particular case.
In the code existed just before this patch binding of a table reference to
the specification of the corresponding CTE happens in the function
open_and_process_table(). If the table reference is not the first in the
query the specification is cloned in the same way as the specification of
a view is cloned for any reference of the view. This works fine for
standalone queries, but does not work for stored procedures / functions
for the following reason.
When the first call of a stored procedure/ function SP is processed the
body of SP is parsed. When a query of SP is parsed the info on each
encountered table reference is put into a TABLE_LIST object linked into
a global chain associated with the query. When parsing of the query is
finished the basic info on the table references from this chain except
table references to derived tables and information schema tables is put
in one hash table associated with SP. When parsing of the body of SP is
finished this hash table is used to construct TABLE_LIST objects for all
table references mentioned in SP and link them into the list of such
objects passed to a pre-locking process that calls open_and_process_table()
for each table from the list.
When a TABLE_LIST for a view is encountered the view is opened and its
specification is parsed. For any table reference occurred in
the specification a new TABLE_LIST object is created to be included into
the list for pre-locking. After all objects in the pre-locking have been
looked through the tables mentioned in the list are locked. Note that the
objects referenced CTEs are just skipped here as it is impossible to
resolve these references without any info on the context where they occur.
Now the statements from the body of SP are executed one by one that.
At the very beginning of the execution of a query the tables used in the
query are opened and open_and_process_table() now is called for each table
reference mentioned in the list of TABLE_LIST objects associated with the
query that was built when the query was parsed.
For each table reference first the reference is checked against CTEs
definitions in whose scope it occurred. If such definition is found the
reference is considered resolved and if this is not the first reference
to the found CTE the the specification of the CTE is re-parsed and the
result of the parsing is added to the parsing tree of the query as a
sub-tree. If this sub-tree contains table references to other tables they
are added to the list of TABLE_LIST objects associated with the query in
order the referenced tables to be opened. When the procedure that opens
the tables comes to the TABLE_LIST object created for a non-first
reference to a CTE it discovers that the referenced table instance is not
locked and reports an error.
Thus processing non-first table references to a CTE similar to how
references to view are processed does not work for queries used in stored
procedures / functions. And the main problem is that the current
pre-locking mechanism employed for stored procedures / functions does not
allow to save the context in which a CTE reference occur. It's not trivial
to save the info about the context where a CTE reference occurs while the
resolution of the table reference cannot be done without this context and
consequentially the specification for the table reference cannot be
determined.
This patch solves the above problem by moving resolution of all CTE
references at the parsing stage. More exactly references to CTEs occurred in
a query are resolved right after parsing of the query has finished. After
resolution any CTE reference it is marked as a reference to to derived
table. So it is excluded from the hash table created for pre-locking used
base tables and view when the first call of a stored procedure / function
is processed.
This solution required recursive calls of the parser. The function
THD::sql_parser() has been added specifically for recursive invocations of
the parser.
In the code existed just before this patch binding of a table reference to
the specification of the corresponding CTE happens in the function
open_and_process_table(). If the table reference is not the first in the
query the specification is cloned in the same way as the specification of
a view is cloned for any reference of the view. This works fine for
standalone queries, but does not work for stored procedures / functions
for the following reason.
When the first call of a stored procedure/ function SP is processed the
body of SP is parsed. When a query of SP is parsed the info on each
encountered table reference is put into a TABLE_LIST object linked into
a global chain associated with the query. When parsing of the query is
finished the basic info on the table references from this chain except
table references to derived tables and information schema tables is put
in one hash table associated with SP. When parsing of the body of SP is
finished this hash table is used to construct TABLE_LIST objects for all
table references mentioned in SP and link them into the list of such
objects passed to a pre-locking process that calls open_and_process_table()
for each table from the list.
When a TABLE_LIST for a view is encountered the view is opened and its
specification is parsed. For any table reference occurred in
the specification a new TABLE_LIST object is created to be included into
the list for pre-locking. After all objects in the pre-locking have been
looked through the tables mentioned in the list are locked. Note that the
objects referenced CTEs are just skipped here as it is impossible to
resolve these references without any info on the context where they occur.
Now the statements from the body of SP are executed one by one that.
At the very beginning of the execution of a query the tables used in the
query are opened and open_and_process_table() now is called for each table
reference mentioned in the list of TABLE_LIST objects associated with the
query that was built when the query was parsed.
For each table reference first the reference is checked against CTEs
definitions in whose scope it occurred. If such definition is found the
reference is considered resolved and if this is not the first reference
to the found CTE the the specification of the CTE is re-parsed and the
result of the parsing is added to the parsing tree of the query as a
sub-tree. If this sub-tree contains table references to other tables they
are added to the list of TABLE_LIST objects associated with the query in
order the referenced tables to be opened. When the procedure that opens
the tables comes to the TABLE_LIST object created for a non-first
reference to a CTE it discovers that the referenced table instance is not
locked and reports an error.
Thus processing non-first table references to a CTE similar to how
references to view are processed does not work for queries used in stored
procedures / functions. And the main problem is that the current
pre-locking mechanism employed for stored procedures / functions does not
allow to save the context in which a CTE reference occur. It's not trivial
to save the info about the context where a CTE reference occurs while the
resolution of the table reference cannot be done without this context and
consequentially the specification for the table reference cannot be
determined.
This patch solves the above problem by moving resolution of all CTE
references at the parsing stage. More exactly references to CTEs occurred in
a query are resolved right after parsing of the query has finished. After
resolution any CTE reference it is marked as a reference to to derived
table. So it is excluded from the hash table created for pre-locking used
base tables and view when the first call of a stored procedure / function
is processed.
This solution required recursive calls of the parser. The function
THD::sql_parser() has been added specifically for recursive invocations of
the parser.
XA transaction only allows to access data in specific states,
in ACTIVE, but not in IDLE or PREPARE.
But even then one should be able to run SHOW STATUS.
When you only need view structure, don't call handle_derived with
DT_CREATE and rely on its internal hackish check to skip DT_CREATE.
Because handle_derived is called from many different places,
and this internal hackish check is indiscriminative.
Instead, just don't ask handle_derived to do DT_CREATE
if you don't want it to do DT_CREATE.
When you only need view structure, don't call handle_derived with
DT_CREATE and rely on its internal hackish check to skip DT_CREATE.
Because handle_derived is called from many different places,
and this internal hackish check is indiscriminative.
Instead, just don't ask handle_derived to do DT_CREATE
if you don't want it to do DT_CREATE.
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
The easiest way to compile and test the server with UBSAN is to run:
./BUILD/compile-pentium64-ubsan
and then run mysql-test-run.
After this commit, one should be able to run this without any UBSAN
warnings. There is still a few compiler warnings that should be fixed
at some point, but these do not expose any real bugs.
The 'special' cases where we disable, suppress or circumvent UBSAN are:
- ref10 source (as here we intentionally do some shifts that UBSAN
complains about.
- x86 version of optimized int#korr() methods. UBSAN do not like unaligned
memory access of integers. Fixed by using byte_order_generic.h when
compiling with UBSAN
- We use smaller thread stack with ASAN and UBSAN, which forced me to
disable a few tests that prints the thread stack size.
- Verifying class types does not work for shared libraries. I added
suppression in mysql-test-run.pl for this case.
- Added '#ifdef WITH_UBSAN' when using integer arithmetic where it is
safe to have overflows (two cases, in item_func.cc).
Things fixed:
- Don't left shift signed values
(byte_order_generic.h, mysqltest.c, item_sum.cc and many more)
- Don't assign not non existing values to enum variables.
- Ensure that bool and enum values are properly initialized in
constructors. This was needed as UBSAN checks that these types has
correct values when one copies an object.
(gcalc_tools.h, ha_partition.cc, item_sum.cc, partition_element.h ...)
- Ensure we do not called handler functions on unallocated objects or
deleted objects.
(events.cc, sql_acl.cc).
- Fixed bugs in Item_sp::Item_sp() where we did not call constructor
on Query_arena object.
- Fixed several cast of objects to an incompatible class!
(Item.cc, Item_buff.cc, item_timefunc.cc, opt_subselect.cc, sql_acl.cc,
sql_select.cc ...)
- Ensure we do not do integer arithmetic that causes over or underflows.
This includes also ++ and -- of integers.
(Item_func.cc, Item_strfunc.cc, item_timefunc.cc, sql_base.cc ...)
- Added JSON_VALUE_UNITIALIZED to json_value_types and ensure that
value_type is initialized to this instead of to -1, which is not a valid
enum value for json_value_types.
- Ensure we do not call memcpy() when second argument could be null.
- Fixed that Item_func_str::make_empty_result() creates an empty string
instead of a null string (safer as it ensures we do not do arithmetic
on null strings).
Other things:
- Changed struct st_position to an OBJECT and added an initialization
function to it to ensure that we do not copy or use uninitialized
members. The change to a class was also motived that we used "struct
st_position" and POSITION randomly trough the code which was
confusing.
- Notably big rewrite in sql_acl.cc to avoid using deleted objects.
- Changed in sql_partition to use '^' instead of '-'. This is safe as
the operator is either 0 or 0x8000000000000000ULL.
- Added check for select_nr < INT_MAX in JOIN::build_explain() to
avoid bug when get_select() could return NULL.
- Reordered elements in POSITION for better alignment.
- Changed sql_test.cc::print_plan() to use pointers instead of objects.
- Fixed bug in find_set() where could could execute '1 << -1'.
- Added variable have_sanitizer, used by mtr. (This variable was before
only in 10.5 and up). It can now have one of two values:
ASAN or UBSAN.
- Moved ~Archive_share() from ha_archive.cc to ha_archive.h and marked
it virtual. This was an effort to get UBSAN to work with loaded storage
engines. I kept the change as the new place is better.
- Added in CONNECT engine COLBLK::SetName(), to get around a wrong cast
in tabutil.cpp.
- Added HAVE_REPLICATION around usage of rgi_slave, to get embedded
server to compile with UBSAN. (Patch from Marko).
- Added #ifdef for powerpc64 to avoid a bug in old gcc versions related
to integer arithmetic.
Changes that should not be needed but had to be done to suppress warnings
from UBSAN:
- Added static_cast<<uint16_t>> around shift to get rid of a LOT of
compiler warnings when using UBSAN.
- Had to change some '/' of 2 base integers to shift to get rid of
some compile time warnings.
Reviewed by:
- Json changes: Alexey Botchkov
- Charset changes in ctype-uca.c: Alexander Barkov
- InnoDB changes & Embedded server: Marko Mäkelä
- sql_acl.cc changes: Vicențiu Ciorbaru
- build_explain() changes: Sergey Petrunia
The EXPLAIN EXTENDED statement run as a prepared statement can produce extra
warning comparing with a case when EXPLAIN EXTENDED statement is run as
a regular statement. For example, the following test case
CREATE TABLE t1 (c int);
CREATE TABLE t2 (d int);
EXPLAIN EXTENDED SELECT (SELECT 1 FROM t2 WHERE d = c) FROM t1;
produces the extra warning
"Field or reference 'c' of SELECT #2 was resolved in SELECT #1"
in case the above mentioned "EXPLAIN EXTENDED" statement is executed
in PS mode, that is by submitting the following statements:
PREPARE stmt FROM "EXPLAIN EXTENDED SELECT (SELECT 1 FROM t2 WHERE d = c) FROM t1";
EXECUTE stmt;
The reason of the extra warning emittion is in a way items
are handled (being fixed) during execution of the JOIN::prepare() method.
The method Item_field::fix_fields() calls the find_field_in_tables()
function in case a field hasn't been associated yet with the item.
Implementation of the find_field_in_tables() function first checks whether
a table containing the required field was already opened and cached.
It is done by checking the data member item->cached_table. This data member
is set on handling the PRERARE FROM statement and checked on executing
the EXECUTE statement. If the data member item->cached_table is set
the find_field_in_tables() function invoked and the
mark_select_range_as_dependent() function called if the field
is an outer referencee. The mark_select_range_as_dependent() function
calls the mark_as_dependent() function that finally invokes
the push_warning_printf() function that produces extra warning.
To fix the issue, calling of push_warning_printf() is elimited in case
it was run indirectly in result of hanlding already opened table from
the Item_field::fix_fields() method.
Problem:
=======
Upon deleting or updating a row in a parent table (with primary key), if
the child table has virtual column and an associated key with ON UPDATE
CASCADE/ON DELETE CASCADE, it will result in slave crash.
Analysis:
========
Tables which are related through foreign key require prelocking similar to
triggers. i.e If a table has triggers/foreign keys we should add all tables
and routines used by them to the prelocking set. This prelocking happens
during 'open_and_lock_tables' call. Each table being opened is checked for
foreign key references. If foreign key reference exists then the child
table is opened and it is linked to the table_list. Upon any modification
to parent table its corresponding child tables are retried from table_list
and they are updated accordingly. This prelocking work fine on master.
On slave prelocking works for following cases.
- Statement/mixed based replication
- In row based replication when trigger execution is enabled through
'slave_run_triggers_for_rbr=YES/LOGGING/ENFORCE'
Otherwise it results in an assert/crash, as the parent table will not find
the corresponding child table and it will be NULL. Dereferencing NULL
pointer leads to slave server exit.
Fix:
===
Introduce a new 'slave_fk_event_map' flag similar to 'trg_event_map'. This
flag will ensure that when foreign key is enabled in row based replication
all the parent and child tables are prelocked, so that parent is able to
locate the child table.
Note: This issue is specific to slave, hence only slave needs to be
upgraded.
When the query using a recursive CTE whose definition contained wildcard
symbols in the recursive part was processed at the prepare stage an
assertion was hit if the query was executed without any default database
set. The failure happened when the function insert_fields() tried to check
column privileges for the temporary table created for a recursive
reference to the CTE. No acl checks are needed for any CTE. That's why this
check should be blocked as well. The patch formulates a stricter condition
at which this check is to be blocked that covers the case when a query
using recursive CTEs is executed with no default database set.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
The reason for the failure is that
thd->mdl_context.release_transactional_locks()
was called after commit & rollback even in cases where the current
transaction is still active.
For 10.2, 10.3 and 10.4 the fix is simple:
- Replace all calls to thd->mdl_context.release_transactional_locks() with
thd->release_transactional_locks(). The thd function will only call
the mdl_context function if there are no active transactional locks.
In 10.6 we will better fix where we will change the return value for
some trans_xxx() functions to indicate if transaction did close the
transaction or not. This will avoid the need of the indirect call.
Other things:
- trans_xa_commit() and trans_xa_rollback() will automatically
call release_transactional_locks() if the transaction is closed.
- We can't do that for the other functions as the caller of many of these
are doing additional work (like close_thread_tables) before calling
release_transactional_locks().
- Added missing abort_result_set() and missing DBUG_RETURN in
select_create::send_eof()
- Fixed wrong indentation in injector::transaction::commit()
Deadlock is possible between applier thread and local committing thread with active FLUSH TABLE.
Applier thread should skip table share checks and locks when opening table.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
