InnoDB AUTOINC code expects the locks to be released in strict reverse order
at the end of the statement. However, nested stored proedures and partition
tables break this rule. We now allow the locks to be deleted from the
trx->autoinc_locks vector in any order but optimise for the common (old) case.
rb://441 Approved by Marko Makela
When using BINLOG statement to execute rows log events, session variables
foreign_key_checks and unique_checks are changed temporarily. As each rows
log event has their own special session environment and its own
foreign_key_checks and unique_checks can be different from current session
which executing the BINLOG statement. But these variables are not restored
correctly after BINLOG statement. This problem will cause that the following
statements fail or generate unexpected data.
In this patch, code is added to backup and restore these two variables.
So BINLOG statement will not affect current session's variables again.
win x86 debug_max
The windows MTR run exhibited a different test execution
ordering (due to the fact that in these platforms MTR is invoked
with --parallel > 1). This uncovered a bug in the aforementioned
test case, which is triggered by the following conditions:
1. server is not restarted between two different tests;
2. the test before binlog.binlog_row_failure_mixing_engines
issues flush logs;
3. binlog.binlog_row_failure_mixing_engines uses binlog
positions to limit the output of show_binlog_events;
4. binlog.binlog_row_failure_mixing_engines does not state which
binlog file to use, thence it uses a wrong binlog file with
the correct position.
There are two possible fixes: 1. make sure that the test start
from a clean slate - binlog wise; 2. in addition to the position,
also state the binary log file before sourcing
show_binlog_events.inc .
We go for fix#1, ie, deploy a RESET MASTER before the test is
actually started.
Problem: MySQL cp1251 did not support 'U+20AC EURO SIGN'
which was assigned a few years ago to 0x88.
Fix: adding mapping: 0x88 <-> U+20AC
@ mysql-test/include/ctype_8bit.inc
New shared file to test 8bit character sets.
@ mysql-test/r/ctype_cp1251.result
@ mysql-test/t/ctype_cp1251.test
Adding tests
@ sql/share/charsets/cp1251.xml
Adding mapping
@ strings/ctype-extra.c
Regenerating ctype-extra.c using strings/conf_to_src
according to new cp1251.xml
After dropping and recreating the database specified along with --one-database
option at command line, mysql client keeps filtering the statements even after
the execution of a 'USE' command on the same database.
--one-database option enables the filtering of statements when the current
database is not the one specified at the command line. However, when the same
database is dropped and recreated the variable (current_db) that holds the
inital database name gets altered. This bug exploits the fact that current_db
initially gets set to null value (0) when a 'use db_name' follows the recreation
of same database db_name (speficied at the command line) and hence skip_updates
gets set to 1, which inturn triggers the further filtering of statements.
Fixed by making get_current_db() a no-op function when one_database is set,
and hence, under that condition current_db will not get altered.
Note, however the value of current_db can change when we execute 'connect'
command with a differnet database to reconnect to the server, in which case,
the behavior of --one-database will be formulated using this new database.
It does work in general, the problem here was that the test name
'alter_table' matches 'main.alter_table-big' which has already been found.
Fixed by matching more explicitly (with/without suite name)
> revision-id: gshchepa@mysql.com-20100801181236-uyuq6ewaq43rw780
> parent: alexey.kopytov@sun.com-20100723115254-jjwmhq97b9wl932l
> committer: Gleb Shchepa <gshchepa@mysql.com>
> branch nick: mysql-5.1-security
> timestamp: Sun 2010-08-01 22:12:36 +0400
> Bug #54461: crash with longblob and union or update with subquery
>
> Queries may crash, if
> 1) the GREATEST or the LEAST function has a mixed list of
> numeric and LONGBLOB arguments and
> 2) the result of such a function goes through an intermediate
> temporary table.
>
> An Item that references a LONGBLOB field has max_length of
> UINT_MAX32 == (2^32 - 1).
>
> The current implementation of GREATEST/LEAST returns REAL
> result for a mixed list of numeric and string arguments (that
> contradicts with the current documentation, this contradiction
> was discussed and it was decided to update the documentation).
>
> The max_length of such a function call was calculated as a
> maximum of argument max_length values (i.e. UINT_MAX32).
>
> That max_length value of UINT_MAX32 was used as a length for
> the intermediate temporary table Field_double to hold
> GREATEST/LEAST function result.
>
> The Field_double::val_str() method call on that field
> allocates a String value.
>
> Since an allocation of String reserves an additional byte
> for a zero-termination, the size of String buffer was
> set to (UINT_MAX32 + 1), that caused an integer overflow:
> actually, an empty buffer of size 0 was allocated.
>
> An initialization of the "first" byte of that zero-size
> buffer with '\0' caused a crash.
>
> The Item_func_min_max::fix_length_and_dec() has been
> modified to calculate max_length for the REAL result like
> we do it for arithmetical operators.
If mysqltest dies, mtr waits to see if mysqld dies too within 100ms
But in that case, it should not care about expected crash
Fix: jump past the code that checks the expect file
OPTIMIZE TABLE recreates the whole table. That is why the counter gets reset.
Making the next autoinc column persistent is a separate issue from resetting
the value after an OPTIMIZE TABLE. We already have a check for ALTER TABLE
and CREATE INDEX to preserve the value on table recreate. We should be able to
add an additional check for OPTIMIZE TABLE to preserve the next value.
rb://519 Approved by Jimmy Yang.
Follow-up discussed with Reporter:
Avoid hard shutdown after test failure, if caused by server log warning
AND we are running valgrind
More general pick-up of valgrind summaries, order may apparently vary
Do exit(1) if we did find valgrind summary warnings
In case of low memory sort buffer QUICK_INDEX_MERGE_SELECT creates
temporary file where is stores row ids which meet QUICK_SELECT ranges
except of clustered pk range, clustered range is processed separately.
In init_read_record we check if temporary file is used and choose
appropriate record access method. It does not take into account that
temporary file contains partial result in case of QUICK_INDEX_MERGE_SELECT
with clustered pk range.
The fix is always to use rr_quick if QUICK_INDEX_MERGE_SELECT
with clustered pk range is used.
> revision-id: alexey.kopytov@sun.com-20100824103548-ikm79qlfrvggyj9h
> parent: sunny.bains@oracle.com-20100816001222-xqc447tr6jwh8c53
> committer: Alexey Kopytov <Alexey.Kopytov@Sun.com>
> branch nick: 5.1-security
> timestamp: Tue 2010-08-24 14:35:48 +0400
> message:
> Bug #55568: user variable assignments crash server when used
> within query
>
> The server could crash after materializing a derived table
> which requires a temporary table for grouping.
>
> When destroying the temporary table used to execute a query for
> a derived table, JOIN::destroy() did not clean up Item_fields
> pointing to fields in the temporary table. This led to
> dereferencing a dangling pointer when printing out the items
> tree later in the outer SELECT.
>
> The solution is an addendum to the patch for bug37362: in
> addition to cleaning up items in tmp_all_fields3, do the same
> for items in tmp_all_fields1, since now we have an example
> where this is necessary.
Problem: crash in Item_float constructor on DBUG_ASSERT due
to not null-terminated string parameter.
Fix: making Item_float::Item_float non-null-termintated parameter safe:
- Using temporary buffer when generating error
modified:
@ mysql-test/r/xml.result
@ mysql-test/t/xml.test
@ sql/item.cc
ESCAPE argument might be empty string. It leads
to server crash under some circumstances.
The fix:
-added check if ESCAPE argument result is not empty string
Problem: When GET_FORMAT() is called two times from the upper
level function (e.g. LEAST in the bug report), on the second
call "res= args[0]->val_str(...)" and str point to the same
String object.
1. Fix: changing the order from
- get val_str into tmp_value then convert to str
to
- get val_str into str then convert to tmp_value
The new order is more correct: the purpose of "str" parameter
is exactly to call val_str() for arguments.
The purpose of String class members (like tmp_value) is to do further
actions on the result.
Doing it in the other way around give unexpected surprises.
2. Using str_value instead of str to do padding, for the same reason.
Bug#55794: ulonglong options of mysqld show wrong values.
Port the few remaining system variables to the correct mechanism --
range-check in check-stage (and throw error or warning at that point
as needed and depending on STRICTness), update in update stage.
Fix some signedness errors when retrieving sysvar values for display.
Bug#57820 extractvalue crashes
Problem: ExtractValue and Replace crashed in some cases
due to invalid handling of empty and NULL arguments.
Per file comments:
@mysql-test/r/ctype_ujis.result
@mysql-test/r/xml.result
@mysql-test/t/ctype_ujis.test
@mysql-test/t/xml.test
Adding tests
@sql/item_strfunc.cc
Make sure Item_func_replace::val_str safely handles empty strings.
@sql/item_xmlfunc.cc
set null_value if nodeset_func returned NULL,
which is possible when the second argument is an
unset user variable.
MySQL 5.1 server
Server used to clip overly long user-names. This was presumably lost
when code was made UTF8-clean.
Now we emulate the behaviour for backward compatibility, but UTF8-ly
correct.
