INSERT uses query_id to verify what fields are
mentioned in the fields list of the INSERT command.
However the check for that is made after the
ON DUPLICATE KEY is processed. This causes all
the fields mentioned in ON DUPLICATE KEY to be
considered as mentioned in the fields list of
INSERT.
Moved the check up, right after processing the
fields list.
fixes).
The legend: on a replication slave, in case a trigger creation
was filtered out because of application of replicate-do-table/
replicate-ignore-table rule, the parsed definition of a trigger was not
cleaned up properly. LEX::sphead member was left around and leaked
memory. Until the actual implementation of support of
replicate-ignore-table rules for triggers by the patch for Bug 24478 it
was never the case that "case SQLCOM_CREATE_TRIGGER"
was not executed once a trigger was parsed,
so the deletion of lex->sphead there worked and the memory did not leak.
The fix:
The real cause of the bug is that there is no 1 or 2 places where
we can clean up the main LEX after parse. And the reason we
can not have just one or two places where we clean up the LEX is
asymmetric behaviour of MYSQLparse in case of success or error.
One of the root causes of this behaviour is the code in Item::Item()
constructor. There, a newly created item adds itself to THD::free_list
- a single-linked list of Items used in a statement. Yuck. This code
is unaware that we may have more than one statement active at a time,
and always assumes that the free_list of the current statement is
located in THD::free_list. One day we need to be able to explicitly
allocate an item in a given Query_arena.
Thus, when parsing a definition of a stored procedure, like
CREATE PROCEDURE p1() BEGIN SELECT a FROM t1; SELECT b FROM t1; END;
we actually need to reset THD::mem_root, THD::free_list and THD::lex
to parse the nested procedure statement (SELECT *).
The actual reset and restore is implemented in semantic actions
attached to sp_proc_stmt grammar rule.
The problem is that in case of a parsing error inside a nested statement
Bison generated parser would abort immediately, without executing the
restore part of the semantic action. This would leave THD in an
in-the-middle-of-parsing state.
This is why we couldn't have had a single place where we clean up the LEX
after MYSQLparse - in case of an error we needed to do a clean up
immediately, in case of success a clean up could have been delayed.
This left the door open for a memory leak.
One of the following possibilities were considered when working on a fix:
- patch the replication logic to do the clean up. Rejected
as breaks module borders, replication code should not need to know the
gory details of clean up procedure after CREATE TRIGGER.
- wrap MYSQLparse with a function that would do a clean up.
Rejected as ideally we should fix the problem when it happens, not
adjust for it outside of the problematic code.
- make sure MYSQLparse cleans up after itself by invoking the clean up
functionality in the appropriate places before return. Implemented in
this patch.
- use %destructor rule for sp_proc_stmt to restore THD - cleaner
than the prevoius approach, but rejected
because needs a careful analysis of the side effects, and this patch is
for 5.0, and long term we need to use the next alternative anyway
- make sure that sp_proc_stmt doesn't juggle with THD - this is a
large work that will affect many modules.
Cleanup: move main_lex and main_mem_root from Statement to its
only two descendants Prepared_statement and THD. This ensures that
when a Statement instance was created for purposes of statement backup,
we do not involve LEX constructor/destructor, which is fairly expensive.
In order to track that the transformation produces equivalent
functionality please check the respective constructors and destructors
of Statement, Prepared_statement and THD - these members were
used only there.
This cleanup is unrelated to the patch.
Fixed compile-pentium64 scripts
Fixed wrong estimate of update_with_key_prefix in sql-bench
Merge bk-internal.mysql.com:/home/bk/mysql-5.1 into mysql.com:/home/my/mysql-5.1
Fixed unsafe define of uint4korr()
Fixed that --extern works with mysql-test-run.pl
Small trivial cleanups
This also fixes a bug in counting number of rows that are updated when we have many simultanous queries
Move all connection handling and command exectuion main loop from sql_parse.cc to sql_connection.cc
Split handle_one_connection() into reusable sub functions.
Split create_new_thread() into reusable sub functions.
Added thread_scheduler; Preliminary interface code for future thread_handling code.
Use 'my_thread_id' for internal thread id's
Make thr_alarm_kill() to depend on thread_id instead of thread
Make thr_abort_locks_for_thread() depend on thread_id instead of thread
In store_globals(), set my_thread_var->id to be thd->thread_id.
Use my_thread_var->id as basis for my_thread_name()
The above changes makes the connection we have between THD and threads more soft.
Added a lot of DBUG_PRINT() and DBUG_ASSERT() functions
Fixed compiler warnings
Fixed core dumps when running with --debug
Removed setting of signal masks (was never used)
Made event code call pthread_exit() (portability fix)
Fixed that event code doesn't call DBUG_xxx functions before my_thread_init() is called.
Made handling of thread_id and thd->variables.pseudo_thread_id uniform.
Removed one common 'not freed memory' warning from mysqltest
Fixed a couple of usage of not initialized warnings (unlikely cases)
Suppress compiler warnings from bdb and (for the moment) warnings from ndb
Several problems fixed:
1. There was a "catch-all" context initialization in setup_tables()
that was causing the table that we insert into to be visible in the
SELECT part of an INSERT .. SELECT .. statement with no tables in
its FROM clause. This was making sure all the under-initialized
contexts in various parts of the code are not left uninitialized.
Fixed by removing the "catch-all" statement and initializing the
context in the parser.
2. Incomplete name resolution context when resolving the right-hand
values in the ON DUPLICATE KEY UPDATE ... part of an INSERT ... SELECT ...
caused columns from NATURAL JOIN/JOIN USING table references in the
FROM clause of the select to be unavailable.
Fixed by establishing a proper name resolution context.
3. When setting up the special name resolution context for problem 2
there was no check for cases where an aggregate function without a
GROUP BY effectively takes the column from the SELECT part of an
INSERT ... SELECT unavailable for ON DUPLICATE KEY UPDATE.
Fixed by checking for that condition when setting up the name
resolution context.
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
Fixed compiler warnings (detected by VC++):
- Removed not used variables
- Added casts
- Fixed wrong assignments to bool
- Fixed wrong calls with bool arguments
- Added missing argument to store(longlong), which caused wrong store method to be called.
- Removed not used variables
- Changed some ulong parameters/variables to ulonglong (possible serious bug)
- Added casts to get rid of safe assignment from longlong to long (and similar)
- Added casts to function parameters
- Fixed signed/unsigned compares
- Added some constructores to structures
- Removed some not portable constructs
Better fix for bug Bug #21428 "skipped 9 bytes from file: socket (3)" on "mysqladmin shutdown"
(Added new parameter to net_clear() to define when we want the communication buffer to be emptied)
Added missing DBUG_RETURN statements (in mysqldump.c)
Added missing enums
Fixed a lot of wrong DBUG_PRINT() statements, some of which could cause crashes
Removed usage of %lld and %p in printf strings as these are not portable or produces different results on different systems.
(Mostly in DBUG_PRINT() and unused arguments)
Fixed bug in query cache when used with traceing (--with-debug)
Fixed memory leak in mysqldump
Removed warnings from mysqltest scripts (replaced -- with #)
When statement to be prepared contained CREATE PROCEDURE, CREATE FUNCTION
or CREATE TRIGGER statements with a syntax error in it, the preparation
would fail with syntax error message, but the memory could be corrupted.
The problem occurred because we switch memroot when parse stored
routine or trigger definitions, and on parse error we restored the
original memroot only after performing some memory operations. In more
detail:
- prepared statement would activate its own memory root to parse
the definition of the stored procedure.
- SP would reset this memory root with its own memory root to
parse SP statements
- a syntax error would happen
- prepared statement would restore the original memory root
- stored procedure would restore what it thinks was the original
memory root, but actually was the statement memory root.
That led to double free - in destruction of the statement and in
a next call to mysql_parse().
The solution is to restore memroot right after the failed parsing.
