One effect of this change in the test suite is that tests with very few
rows changed to use sub queries instead of materialization. This is
correct and expected as for these the materialization overhead is too high.
A lot of tests where fixed to still use materialization by adding a
few rows to the tables (most tests has only 2-3 rows and are thus easily
affected when cost computations are changed).
Other things:
- Added more variables to TMPTABLE_COSTS for better cost calculation
- Added cost of copying rows to TMPTABLE_COSTS lookup and write
- Added THD::optimizer_cache_hit_ratio for easier cost calculations
- Added DISK_FAST_READ_SIZE to be used when calculating costs when
reading big blocks from a disk
Variables added:
- optimizer_index_block_copy_cost
- optimizer_key_copy_cost
- optimizer_key_next_find_cost
- optimizer_key_compare_cost
- optimizer_row_copy_cost
- optimizer_where_compare_cost
Some rename of defines was done to make the internal defines similar to
the visible ones:
TIME_FOR_COMPARE -> WHERE_COST; WHERE_COST was also "inverted" to be
a number between 0 and 1 that is multiply with accepted records
(similar to other optimizer variables).
TIME_FOR_COMPARE_IDX -> KEY_COMPARE_COST. This is also inverted,
similar to TIME_FOR_COMPARE.
TIME_FOR_COMPARE_ROWID -> ROWID_COMPARE_COST. This is also inverted,
similar to TIME_FOR_COMPARE.
All default costs are identical to what they where before this patch.
Other things:
- Compare factor in get_merge_buffers_cost() was inverted.
- Changed namespace to static in filesort_utils.cc
Before this patch, when calculating the cost of fetching and using a
row/key from the engine, we took into account the cost of finding a
row or key from the engine, but did not consistently take into account
index only accessed, clustered key or covered keys for all access
paths.
The cost of the WHERE clause (TIME_FOR_COMPARE) was not consistently
considered in best_access_path(). TIME_FOR_COMPARE was used in
calculation in other places, like greedy_search(), but was in some
cases (like scans) done an a different number of rows than was
accessed.
The cost calculation of row and index scans didn't take into account
the number of rows that where accessed, only the number of accepted
rows.
When using a filter, the cost of index_only_reads and cost of
accessing and disregarding 'filtered rows' where not taken into
account, which made filters cost less than there actually where.
To remedy the above, the following key & row fetch related costs
has been added:
- The cost of fetching and using a row is now split into different costs:
- key + Row fetch cost (as before) but multiplied with the variable
'optimizer_cache_cost' (default to 0.5). This allows the user to
tell the optimizer the likehood of finding the key and row in the
engine cache.
- ROW_COPY_COST, The cost copying a row from the engine to the
sql layer or creating a row from the join_cache to the record
buffer. Mostly affects table scan costs.
- ROW_LOOKUP_COST, the cost of fetching a row by rowid.
- KEY_COPY_COST the cost of finding the next key and copying it from
the engine to the SQL layer. This is used when we calculate the cost
index only reads. It makes index scans more expensive than before if
they cover a lot of rows. (main.index_merge_myisam)
- KEY_LOOKUP_COST, the cost of finding the first key in a range.
This replaces the old define IDX_LOOKUP_COST, but with a higher cost.
- KEY_NEXT_FIND_COST, the cost of finding the next key (and rowid).
when doing a index scan and comparing the rowid to the filter.
Before this cost was assumed to be 0.
All of the above constants/variables are now tuned to be somewhat in
proportion of executing complexity to each other. There is tuning
need for these in the future, but that can wait until the above are
made user variables as that will make tuning much easier.
To make the usage of the above easy, there are new (not virtual)
cost calclation functions in handler:
- ha_read_time(), like read_time(), but take optimizer_cache_cost into
account.
- ha_read_and_copy_time(), like ha_read_time() but take into account
ROW_COPY_TIME
- ha_read_and_compare_time(), like ha_read_and_copy_time() but take
TIME_FOR_COMPARE into account.
- ha_rnd_pos_time(). Read row with row id, taking ROW_COPY_COST
into account. This is used with filesort where we don't need
to execute the WHERE clause again.
- ha_keyread_time(), like keyread_time() but take
optimizer_cache_cost into account.
- ha_keyread_and_copy_time(), like ha_keyread_time(), but add
KEY_COPY_COST.
- ha_key_scan_time(), like key_scan_time() but take
optimizer_cache_cost nto account.
- ha_key_scan_and_compare_time(), like ha_key_scan_time(), but add
KEY_COPY_COST & TIME_FOR_COMPARE.
I also added some setup costs for doing different types of scans and
creating temporary tables (on disk and in memory). This encourages
the optimizer to not use these for simple 'a few row' lookups if
there are adequate key lookup strategies.
- TABLE_SCAN_SETUP_COST, cost of starting a table scan.
- INDEX_SCAN_SETUP_COST, cost of starting an index scan.
- HEAP_TEMPTABLE_CREATE_COST, cost of creating in memory
temporary table.
- DISK_TEMPTABLE_CREATE_COST, cost of creating an on disk temporary
table.
When calculating cost of fetching ranges, we had a cost of
IDX_LOOKUP_COST (0.125) for doing a key div for a new range. This is
now replaced with 'io_cost * KEY_LOOKUP_COST (1.0) *
optimizer_cache_cost', which matches the cost we use for 'ref' and
other key lookups. The effect is that the cost is now a bit higher
when we have many ranges for a key.
Allmost all calculation with TIME_FOR_COMPARE is now done in
best_access_path(). 'JOIN::read_time' now includes the full
cost for finding the rows in the table.
In the result files, many of the changes are now again close to what
they where before the "Update cost for hash and cached joins" commit,
as that commit didn't fix the filter cost (too complex to do
everything in one commit).
The above changes showed a lot of a lot of inconsistencies in
optimizer cost calculation. The main objective with the other changes
was to do calculation as similar (and accurate) as possible and to make
different plans more comparable.
Detailed list of changes:
- Calculate index_only_cost consistently and correctly for all scan
and ref accesses. The row fetch_cost and index_only_cost now
takes into account clustered keys, covered keys and index
only accesses.
- cost_for_index_read now returns both full cost and index_only_cost
- Fixed cost calculation of get_sweep_read_cost() to match other
similar costs. This is bases on the assumption that data is more
often stored on SSD than a hard disk.
- Replaced constant 2.0 with new define TABLE_SCAN_SETUP_COST.
- Some scan cost estimates did not take into account
TIME_FOR_COMPARE. Now all scan costs takes this into
account. (main.show_explain)
- Added session variable optimizer_cache_hit_ratio (default 50%). By
adjusting this on can reduce or increase the cost of index or direct
record lookups. The effect of the default is that key lookups is now
a bit cheaper than before. See usage of 'optimizer_cache_cost' in
handler.h.
- JOIN_TAB::scan_time() did not take into account index only scans,
which produced a wrong cost when index scan was used. Changed
JOIN_TAB:::scan_time() to take into consideration clustered and
covered keys. The values are now cached and we only have to call
this function once. Other calls are changed to use the cached
values. Function renamed to JOIN_TAB::estimate_scan_time().
- Fixed that most index cost calculations are done the same way and
more close to 'range' calculations. The cost is now lower than
before for small data sets and higher for large data sets as we take
into account how many keys are read (main.opt_trace_selectivity,
main.limit_rows_examined).
- Ensured that index_scan_cost() ==
range(scan_of_all_rows_in_table_using_one_range) +
MULTI_RANGE_READ_INFO_CONST. One effect of this is that if there
is choice of doing a full index scan and a range-index scan over
almost the whole table then index scan will be preferred (no
range-read setup cost). (innodb.innodb, main.show_explain,
main.range)
- Fixed the EQ_REF and REF takes into account clustered and covered
keys. This changes some plans to use covered or clustered indexes
as these are much cheaper. (main.subselect_mat_cost,
main.state_tables_innodb, main.limit_rows_examined)
- Rowid filter setup cost and filter compare cost now takes into
account fetching and checking the rowid (KEY_NEXT_FIND_COST).
(main.partition_pruning heap.heap_btree main.log_state)
- Added KEY_NEXT_FIND_COST to
Range_rowid_filter_cost_info::lookup_cost to account of the time
to find and check the next key value against the container
- Introduced ha_keyread_time(rows) that takes into account finding
the next row and copying the key value to 'record'
(KEY_COPY_COST).
- Introduced ha_key_scan_time() for calculating an index scan over
all rows.
- Added IDX_LOOKUP_COST to keyread_time() as a startup cost.
- Added index_only_fetch_cost() as a convenience function to
OPT_RANGE.
- keyread_time() cost is slightly reduced to prefer shorter keys.
(main.index_merge_myisam)
- All of the above caused some index_merge combinations to be
rejected because of cost (main.index_intersect). In some cases
'ref' where replaced with index_merge because of the low
cost calculation of get_sweep_read_cost().
- Some index usage moved from PRIMARY to a covering index.
(main.subselect_innodb)
- Changed cost calculation of filter to take KEY_LOOKUP_COST and
TIME_FOR_COMPARE into account. See sql_select.cc::apply_filter().
filter parameters and costs are now written to optimizer_trace.
- Don't use matchings_records_in_range() to try to estimate the number
of filtered rows for ranges. The reason is that we want to ensure
that 'range' is calculated similar to 'ref'. There is also more work
needed to calculate the selectivity when using ranges and ranges and
filtering. This causes filtering column in EXPLAIN EXTENDED to be
100.00 for some cases where range cannot use filtering.
(main.rowid_filter)
- Introduced ha_scan_time() that takes into account the CPU cost of
finding the next row and copying the row from the engine to
'record'. This causes costs of table scan to slightly increase and
some test to changed their plan from ALL to RANGE or ALL to ref.
(innodb.innodb_mysql, main.select_pkeycache)
In a few cases where scan time of very small tables have lower cost
than a ref or range, things changed from ref/range to ALL.
(main.myisam, main.func_group, main.limit_rows_examined,
main.subselect2)
- Introduced ha_scan_and_compare_time() which is like ha_scan_time()
but also adds the cost of the where clause (TIME_FOR_COMPARE).
- Added small cost for creating temporary table for
materialization. This causes some very small tables to use scan
instead of materialization.
- Added checking of the WHERE clause (TIME_FOR_COMPARE) of the
accepted rows to ROR costs in get_best_ror_intersect()
- Removed '- 0.001' from 'join->best_read' and optimize_straight_join()
to ensure that the 'Last_query_cost' status variable contains the
same value as the one that was calculated by the optimizer.
- Take avg_io_cost() into account in handler::keyread_time() and
handler::read_time(). This should have no effect as it's 1.0 by
default, except for heap that overrides these functions.
- Some 'ref_or_null' accesses changed to 'range' because of cost
adjustments (main.order_by)
- Added scan type "scan_with_join_cache" for optimizer_trace. This is
just to show in the trace what kind of scan was used.
- When using 'scan_with_join_cache' take into account number of
preceding tables (as have to restore all fields for all previous
table combination when checking the where clause)
The new cost added is:
(row_combinations * ROW_COPY_COST * number_of_cached_tables).
This increases the cost of join buffering in proportion of the
number of tables in the join buffer. One effect is that full scans
are now done earlier as the cost is then smaller.
(main.join_outer_innodb, main.greedy_optimizer)
- Removed the usage of 'worst_seeks' in cost_for_index_read as it
caused wrong plans to be created; It prefered JT_EQ_REF even if it
would be much more expensive than a full table scan. A related
issue was that worst_seeks only applied to full lookup, not to
clustered or index only lookups, which is not consistent. This
caused some plans to use index scan instead of eq_ref (main.union)
- Changed federated block size from 4096 to 1500, which is the
typical size of an IO packet.
- Added costs for reading rows to Federated. Needed as there is no
caching of rows in the federated engine.
- Added ha_innobase::rnd_pos_time() cost function.
- A lot of extra things added to optimizer trace
- More costs, especially for materialization and index_merge.
- Make lables more uniform
- Fixed a lot of minor bugs
- Added 'trace_started()' around a lot of trace blocks.
- When calculating ORDER BY with LIMIT cost for using an index
the cost did not take into account the number of row retrivals
that has to be done or the cost of comparing the rows with the
WHERE clause. The cost calculated would be just a fraction of
the real cost. Now we calculate the cost as we do for ranges
and 'ref'.
- 'Using index for group-by' is used a bit more than before as
now take into account the WHERE clause cost when comparing
with 'ref' and prefer the method with fewer row combinations.
(main.group_min_max).
Bugs fixed:
- Fixed that we don't calculate TIME_FOR_COMPARE twice for some plans,
like in optimize_straight_join() and greedy_search()
- Fixed bug in save_explain_data where we could test for the wrong
index when displaying 'Using index'. This caused some old plans to
show 'Using index'. (main.subselect_innodb, main.subselect2)
- Fixed bug in get_best_ror_intersect() where 'min_cost' was not
updated, and the cost we compared with was not the one that was
used.
- Fixed very wrong cost calculation for priority queues in
check_if_pq_applicable(). (main.order_by now correctly uses priority
queue)
- When calculating cost of EQ_REF or REF, we added the cost of
comparing the WHERE clause with the found rows, not all row
combinations. This made ref and eq_ref to be regarded way to cheap
compared to other access methods.
- FORCE INDEX cost calculation didn't take into account clustered or
covered indexes.
- JT_EQ_REF cost was estimated as avg_io_cost(), which is half the
cost of a JT_REF key. This may be true for InnoDB primary key, but
not for other unique keys or other engines. Now we use handler
function to calculate the cost, which allows us to handle
consistently clustered, covered keys and not covered keys.
- ha_start_keyread() didn't call extra_opt() if keyread was already
enabled but still changed the 'keyread' variable (which is wrong).
Fixed by not doing anything if keyread is already enabled.
- multi_range_read_info_cost() didn't take into account io_cost when
calculating the cost of ranges.
- fix_semijoin_strategies_for_picked_join_order() used the wrong
record_count when calling best_access_path() for SJ_OPT_FIRST_MATCH
and SJ_OPT_LOOSE_SCAN.
- Hash joins didn't provide correct best_cost to the upper level, which
means that the cost for hash_joins more expensive than calculated
in best_access_path (a difference of 10x * TIME_OF_COMPARE).
This is fixed in the new code thanks to that we now include
TIME_OF_COMPARE cost in 'read_time'.
Other things:
- Added some 'if (thd->trace_started())' to speed up code
- Removed not used function Cost_estimate::is_zero()
- Simplified testing of HA_POS_ERROR in get_best_ror_intersect().
(No cost changes)
- Moved ha_start_keyread() from join_read_const_table() to join_read_const()
to enable keyread for all types of JT_CONST tables.
- Made a few very short functions inline in handler.h
Notes:
- In main.rowid_filter the join order of order and lineitem is swapped.
This is because the cost of doing a range fetch of lineitem(98 rows) is
almost as big as the whole join of order,lineitem. The filtering will
also ensure that we only have to do very small key fetches of the rows
in lineitem.
- main.index_merge_myisam had a few changes where we are now using
less keys for index_merge. This is because index scans are now more
expensive than before.
- handler->optimizer_cache_cost is updated in ha_external_lock().
This ensures that it is up to date per statements.
Not an optimal solution (for locked tables), but should be ok for now.
- 'DELETE FROM t1 WHERE t1.a > 0 ORDER BY t1.a' does not take cost of
filesort into consideration when table scan is chosen.
(main.myisam_explain_non_select_all)
- perfschema.table_aggregate_global_* has changed because an update
on a table with 1 row will now use table scan instead of key lookup.
TODO in upcomming commits:
- Fix selectivity calculation for ranges with and without filtering and
when there is a ref access but scan is chosen.
For this we have to store the lowest known value for
'accepted_records' in the OPT_RANGE structure.
- Change that records_read does not include filtered rows.
- test_if_cheaper_ordering() needs to be updated to properly calculate
costs. This will fix tests like main.order_by_innodb,
main.single_delete_update
- Extend get_range_limit_read_cost() to take into considering
cost_for_index_read() if there where no quick keys. This will reduce
the computed cost for ORDER BY with LIMIT in some cases.
(main.innodb_ext_key)
- Fix that we take into account selectivity when counting the number
of rows we have to read when considering using a index table scan to
resolve ORDER BY.
- Add new calculation for rnd_pos_time() where we take into account the
benefit of reading multiple rows from the same page.
- Avoid checking for has_transactions if killed flag is not checked
- Simplify code (Have checked with gcc -O3 that there is improvements)
- Added handler::fast_increment_statstics() to be used when a handler
functions wants to increase two statistics for one row access.
- Made check_limit_rows_examened() inline (even if it didn't make any
difference for gcc 7.5.0), still the right thing to do
The user XA commit execution branch was caught not have been covered
with MDEV-21953 fixes.
The XA involved deadlock is resolved now to apply the former fixes
pattern.
Along the fixes the following changes have been implemented.
- MDL lock attribute correction
- dissociation of the externally completed XA from the current
thread's xid_state in the error branches
- cleanup_context() preseves the prepared XA
- wait_for_prior_commit() is relocated to satisfy both
the binlog ON (log-slave-updates and skip-log-bin)
and OFF slave execution branches.
The MDEV-25004 test innodb_fts.versioning is omitted because ever since
commit 685d958e38 InnoDB would not allow
writes to a database where the redo log file ib_logfile0 is missing.
Works like vers_force but forces trx_id-based system-versioned tables
if the storage supports it (currently InnoDB-only). Otherwise creates
timestamp-based system-versioned table.
If the backup finished in the middle of a Aria bulk load insert,
which could happen with LOAD DATA INFILE, CREATE ... SELECT etc)
there was a chance that Aria recovery would fail on the backup.
Fixed by ensuring that bulk load operations for Aria are not allowed
under BACKUP LOCK.
I also changed so that the table TRN is updated just before truncate
which ensures that old redo's for the table are ignored.
I also enabled Aria redo for DDL's to be able to repeat REPAIR commands.
Without this change recovery would not work on repaired tables.
Notes:
- We take the backup lock protection at the end of bulk insert (as we
don't want to keep the lock over a very long running insert).
If mariadb-backup keeps the backup lock too long, this may fail with
a lock timeout. In this case the batch insert will fail and the table
will be truncated (set to it's original state).
This is a DELETE only case. Normally this statement doesn't make inserts,
but DELETE ... FOR PORTION changes it. UPDATE and INSERT initializes
autoinc by calling handler::info(HA_STATUS_AUTO). Also myisam and innodb
can lazily initialize it in their update_create_info overrides.
The solution is to initialize autoinc during delete preparation,
if period (DELETE FOR PORTION) is specified.
The initial work has been done by Kento Takeuchi by his PR #2048,
however this commit also holds a few technical modifications by
Nikita Malyavin
Problem:-
We are able to insert duplicate value in table because cmp_binary_offset
is not able to differentiate between NULL and empty string. So
check_duplicate_long_entry_key is never called and we don't check for
duplicate.
Solution
Added a if condition with is_null() on field which can differentiate
between NULL and empty string.
Specifically:
Revert "MDEV-29664 Assertion `!n_mysql_tables_in_use' failed in innobase_close_connection"
This reverts commit ba875e9396.
Revert "MDEV-29620 Assertion `next_insert_id == 0' failed in handler::ha_external_lock"
This reverts commit aa08a7442a.
Revert "MDEV-29628 Memory leak after CREATE OR REPLACE with foreign key"
This reverts commit c579d66ba6.
Revert "MDEV-29609 create_not_windows test fails with different result"
This reverts commit cb583b2f1b.
Revert "MDEV-29544 SIGSEGV in HA_CREATE_INFO::finalize_locked_tables"
This reverts commit dcd66c3814.
Revert "MDEV-28933 CREATE OR REPLACE fails to recreate same constraint name"
This reverts commit cf6c517632.
Revert "MDEV-28933 Moved RENAME_CONSTRAINT_IDS to include/sql_funcs.h"
This reverts commit f1e1c1335b.
Revert "MDEV-28956 Locking is broken if CREATE OR REPLACE fails under LOCK TABLES"
This reverts commit a228ec80e3.
Revert "MDEV-25292 gcol.gcol_bugfixes --ps fix"
This reverts commit 24fff8267d.
Revert "MDEV-25292 Disable atomic replace for slave-generated or-replace"
This reverts commit 2af15914cb.
Revert "MDEV-25292 backup_log improved"
This reverts commit 34398a20b5.
Revert "MDEV-25292 Atomic CREATE OR REPLACE TABLE"
This reverts commit 93c8252f02.
Revert "MDEV-25292 Table_name class for (db, table_name, alias)"
This reverts commit d145dda9c7.
Revert "MDEV-25292 ha_table_exists() cleanup and improvement"
This reverts commit 409b8a86de.
Revert "MDEV-25292 Cleanups"
This reverts commit 595dad83ad.
Revert "MDEV-25292 Refactoring: moved select_field_count into Alter_info."
This reverts commit f02af1d229.
* clarify the help text for --system-versioning-insert-history
* move the vers_write=false check from Item_field::fix_fields()
next to other vers field checks in find_field_in_table()
* move row_start validation from handler::write_row() next to
vers_update_fields()
* make secure_timestamp check to happen in one place only,
extract it into a function is_set_timestamp_vorbidden().
* overwriting vers fields is an error, just like setting @@timestamp
* don't run vers_insert_history() for every row
1. system_versioning_insert_history session variable allows
pseudocolumns ROW_START and ROW_END be specified in INSERT,
INSERT..SELECT and LOAD DATA.
2. Cleaned up select_insert::send_data() from setting vers_write as
this parameter is now set on TABLE initialization.
4. Replication of system_versioning_insert_history via option_bits in
OPTIONS_WRITTEN_TO_BIN_LOG.
To prevent ASAN heap-use-after-poison in the MDEV-16549 part of
./mtr --repeat=6 main.derived
the initialization of Name_resolution_context was cleaned up.
