The problem was that the COM_STMT_SEND_LONG_DATA was sending a response
packet if the prepared statement wasn't found in the server (due to
reconnection). The commands COM_STMT_SEND_LONG_DATA and COM_STMT_CLOSE
should not send any packets, even error packets should not be sent since
they are not expected by the client API.
The solution is to clear generated during the execution of the aforementioned
commands and to skip resend of prepared statement commands. Another fix is
that if the connection breaks during the send of prepared statement command,
the command is not sent again since the prepared statement is no longer in the
server.
In cases when TRUNCATE was executed by invoking mysql_delete() rather
than by table recreation (for example, when TRUNCATE was issued on
InnoDB table with is referenced by foreign key) triggers were invoked.
In debug builds this also led to crash because of an assertion, which
assumes that some preliminary actions take place before trigger
invocation, which doesn't happen in case of TRUNCATE.
The fix is not to execute triggers in mysql_delete() when this
function is used by TRUNCATE.
The problem is that passing anything other than a integer to a limit
clause in a prepared statement would fail. This limitation was introduced
to avoid replication problems (e.g: replicating the statement with a
string argument would cause a parse failure in the slave).
The solution is to convert arguments to the limit clause to a integer
value and use this converted value when persisting the query to the log.
The problem is that CREATE VIEW statements inside prepared statements
weren't being expanded during the prepare phase, which leads to objects
not being allocated in the appropriate memory arenas.
The solution is to perform the validation of CREATE VIEW statements
during the prepare phase of a prepared statement. The validation
during the prepare phase assures that transformations of the parsed
tree will use the permanent arena of the prepared statement.
a table name.
The problem was that fill_defined_view_parts() did not return
an error if a table is going to be altered. That happened if
the table was already in the table cache. In that case,
open_table() returned non-NULL value (valid TABLE-instance from
the cache).
The fix is to ensure that an error is thrown even if the table
is in the cache.
(This is a backport of the original patch for 5.1)
Executing a prepared statement associated with a materialized
cursor yields to the client a metadata packet with wrong table
and database names. The problem was occurring because the server
was sending the the name of the temporary table used by the cursor
instead of the table name of the original table. The same problem
occurs when selecting from views, in which case the table name was
being sent and not the name of the view.
The solution is to fill the list item from the temporary table but
preserving the table and database names of the original fields. This
is achieved by tweaking the Select_materialize to accept a pointer to
the Materialized_cursor class which contains the item list to be filled.
- Replace per-thread signal()'s with SetUnhandledExceptionFilter().
The only remaining signal() is for SIGABRT (default abort()
handler in VS2005 is broken, i.e removes user exception filter)
- remove MessageBox()'es from error handling code
- Windows port for print_stacktrace() and write_core()
- Cleanup, removed some unused functions
The unsignedness of large integer user variables was not being
properly preserved when feeded to prepared statements. This was
happening because the unsigned flags wasn't being updated when
converting the user variable is converted to a parameter.
The solution is to copy the unsigned flag when converting the
user variable to a parameter and take the unsigned flag into
account when converting the integer to a string.
to leave
The artifact was caused by
a flaw in concurrent accessing the slave's io thd by
the io itself and a handling show slave status thread.
Namely, show_master_info did not acquire mi->run_lock mutex that is
specified for mi->io_thd member.
Fixed with deploying the mutex locking and unlocking. The mutex is kept
short time and without interleaving with mi->data_lock mutex.
Todo: to report and fix an issue with
sys_var_slave_skip_counter::{methods}
seem to acquire incorrectly
active_mi->rli.run_lock
instead of the specified
active_mi->rli.data_lock
A test case is difficult to compose, so rpl_packet should continue serving
as the indicator.
Here is the scenario that causes the failure.(by Mats)
1. The to-be corrupt log event (let's call it X), is split into two
packets B and C on the network level (net_write_buff()). The parts
are X = (x',x''). The part x' ends up in packet B and part x''
ends up in packet C. Prior to the corrupt event X, the event Y has
been written successfully, but has been split into two packets as
well, which we call (y',y'').
2. The master sends packet A = (y'',x') to the slave, increases the
packet sequence number, the slave receives the packet, but fails
to reply before the master gets a timeout.
3. Since the master got a timeout, it reports failure, and aborts
sending the binary log by exiting mysql_binlog_send(). However, it
leaves the buffer intact, still holding y'' (but not x', since the
write_pos is not increased).
4. After exiting mysql_binlog_send(), the master does a
disconnection of the client thread, which involves sending an
error message e to the client (i.e., the slave).
5. In this case, net_write_buff() is used again, but this time the
old contents of the packet is used so that the new packet is
D = (y'',e). Note that this will use a new packet sequence number,
since the packet number was increased in step 2.
6. The slave receives the tail y'' of the Y log event, concatenates
this with x' (which it already received), and writes the event
(x',y'') it to the relay log since it hasn't noticed anything is
amiss.
7. It then tries to read more bytes, which is either e (if the length
given for X just happened to match the length given for Y, or just
plain garbage because the slave is out of sync with what is
actually sent.
8. After a while, the SQL thread tries to execute the event (x',y''),
which is very likely to be just nonsense.
The problem can be fixed by not resetting net->error after the call of
mysql_binlog_send, so the error message will not be sent and the connection
will be closed.
The problem is when create/rename/drop users, the statement was logged regardless of error, even if no data has been changed, the statement was logged.
After this patch, create/rename/drop users don't write the binlog if the statement makes no changes, if the statement does make any changes, log the statement with possible error code.
This patch is based on the patch for BUG#29749, which is not pushed
Fixes:
Bug #32083: server crashes on show status when InnoDB is not initialized
innodb_export_status(): Check that InnoDB has been initialized
before invoking srv_export_innodb_status(). (Bug #32083)
This bug does not exist in MySQL/InnoDB 5.1.
Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
The server used to crash when REPEAT or another control instruction
was used in conjunction with labels and a LEAVE instruction.
The crash was caused by a missing "pop" of handlers or cursors in the
code representing the stored program. When executing the code in a loop,
this missing "pop" would result in a stack overflow, corrupting memory.
Code generation has been fixed to produce the missing h_pop/c_pop
instructions.
Also, the logic checking that labels at the beginning and the end of a
statement are matched was incorrect, causing Bug 33983.
End labels, when used, must match the label used at the beginning of a block.
The problem occurred when one had a subquery that had an equality X=Y where
Y referred to a named select list expression from the parent select. MySQL
crashed when trying to use the X=Y equality for ref-based access.
Fixed by allowing non-Item_field items in the described case.
The ROUND(X, D) function would change the Item::decimals field during
execution to achieve the effect of a dynamic number of decimal digits.
This caused a series of bugs:
Bug #30617:Round() function not working under some circumstances in InnoDB
Bug #33402:ROUND with decimal and non-constant cannot round to 0 decimal places
Bug #30889:filesort and order by with float/numeric crashes server
Fixed by never changing the number of shown digits for DECIMAL when
used with a nonconstant number of decimal digits.
The name resolution for correlated subqueries and HAVING clauses
failed to distinguish which of two was being performed when there
was a reference to an outer aliased field.
Fixed by adding the condition that HAVING clause name resulotion
is being performed.
value when inserting into a view.
The mysql_prepare_insert function checks all fields of the target table that
directly or indirectly (through a view) are specified in the INSERT
statement to have a default value. This check can be skipped if the INSERT
statement doesn't mention any insert fields. In case of a view this allows
fields that aren't mentioned in the view to bypass the check.
Now fields of the target table are always checked to have a default value
when insert goes into a view.
When resolving references we need to take into consideration
the view "fields" and allow qualified access to them.
Fixed by extending the reference resolution to process view
fields correctly.
