This commit fixes problems with parsing ipv6 addresses given via
the wsrep_sst_receive_address and wsrep_node_address options.
Also, this commit removes extra lines in the configuration files
in the mtr test suites for Galera related to these parameters.
We will remove the parameter innodb_disallow_writes because it is badly
designed and implemented. The parameter was never allowed at startup.
It was only internally used by Galera snapshot transfer.
If a user executed
SET GLOBAL innodb_disallow_writes=ON;
the server could hang even on subsequent read operations.
During Galera snapshot transfer, we will block writes
to implement an rsync friendly snapshot, as follows:
sst_flush_tables() will acquire a global lock by executing
FLUSH TABLES WITH READ LOCK, which will block any writes
at the high level.
sst_disable_innodb_writes(), invoked via ha_disable_internal_writes(true),
will suspend or disable InnoDB background tasks or threads that could
initiate writes. As part of this, log_make_checkpoint() will be invoked
to ensure that anything in the InnoDB buf_pool.flush_list will be written
to the data files. This has the nice side effect that the Galera joiner
will avoid crash recovery.
The changes to sql/wsrep.cc and to the tests are based on a prototype
that was developed by Jan Lindström.
Reviewed by: Jan Lindström
This commit adds a mtr test for reproducing a test scenario where despite of
innodb_disallow_writes blocking, writes to file system can still happen.
The test launches a garbd node, which triggers one of the cluster node to switch to
SST donor state. In this state, all disk activity should be halted, and e.g.
innodb_disallow_writes has been set. The test records md5sum aggregate over mariadb
data directory when the node enters the donor state, and records another md5sum
when the node leaves the donor state. If there is no IO activity in data directory, these
hashes should be equal.
For this test, the Donor state processing, has beeen instrumented so that, SST donor thread can be
stopped when entering the donor state. The test uses this new dbug sync point,
to control when to record the md5sums.
New SST script was added: wsrep_sst_backup, and garbd uses backup method to lauch the donor
node to call this script, and to enter in donor state.
The backup script could be later extended as general purpose backup method for the cluster.
This commit fixes also one race condition happening in wsrep_sst_rsync, like this:
* wsrep_rsync_sst script requests for flush tables,
and then waits in a loop until mariadbd has created file tables_flushed,
as confirmation that FLUSH TABLES has completed
* mariadbd's SST donor thread, wakes for the flush table request and then performs FTWRL,
and after this it creates the tables_flushed file
* note that SST script will now continue to startup rsync sending
* mariadbd's SST donor thread now calls for sst_disallow_writes(),
so that innodb would setup disk IO blockage, however rsyncing may already be ongoing at this point
This race condition is fixed in this commit, by performing all disk IO blocking before
creating the tables_flushed file.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
wsrep_sst_common did not correctly set name for binlog index
file if custom binlog name was used and this name was
not added to script command line.
Added test case for both log_basename and log_binlog.
1) This commit implements reading all sections from configuration
files while looking for the current value of any server variable,
which were previously only read from the [mysqld.suffix] group and
from [mysqld], but not from other groups such as [mariadb.suffix],
[mariadb] or, for example, [server].
2) This commit also fixes misrecognition of some parameters when
parsing a command line containing a special marker for the end
of the list of options ("--") or when short option names (such
as "-s", "-a" and "-h arg") chained together (like a "-sah arg").
Such parameters can be passed to the SST script in the list of
arguments after "--mysqld-args" if the server is started with a
complex set of options - this was revealed during manual testing
of changes to read configuration files.
3) The server-side preparation code for the "--mysqld-args"
option list has also been simplified to make it easier to change
in the future (if needed), and has been improved to properly
handle the special backquote ("`") character in the argument
values.
and configuration.
1. Pass joiner's authentication information to donor together with address
in State Transfer Request. This allows joiner to authenticate donor on
connection. Previously joiner would accept data from anywhere.
2. Deprecate custom SSL configuration variables tca, tcert and tkey in favor
of more familiar ssl-ca, ssl-cert and ssl-key. For backward compatibility
tca, tcert and tkey are still supported.
3. Allow falling back to server-wide SSL configuration in [mysqld] if no SSL
configuration is found in [sst] section of the config file.
4. Introduce ssl-mode variable in [sst] section that takes standard values
and has following effects:
- old-style SSL configuration present in [sst]: no effect
otherwise:
- ssl-mode=DISABLED or absent: retains old, backward compatible behavior
and ignores any other SSL configuration
- ssl-mode=VERIFY*: verify joiner's certificate and CN on donor,
verify donor's secret on joiner
(passed to donor via State Transfer Request)
BACKWARD INCOMPATIBLE BEHAVIOR
- anything else enables new SSL configuration convetions but does not
require verification
ssl-mode should be set to VERIFY only in a fully upgraded cluster.
Examples:
[mysqld]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
[sst]
-- server-wide SSL configuration is ignored, SST does not use SSL
[mysqld]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
[sst]
ssl-mode=REQUIRED
-- use server-wide SSL configuration for SST but don't attempt to
verify the peer identity
[sst]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
ssl-mode=VERIFY_CA
-- use SST-specific SSL configuration for SST and require verification
on both sides
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The test requires adaptation for MariaDB, which is done
in this patch. In addition, this patch includes a fix for
the SST script startup code that adds escaping for special
characters on the command line (in case they are contained
in the arguments to mysqld). The fix does not require
separate tests, as the required tests are already part
of the mtr suite for Galera.
After applying MDEV-18863, in some test configurations, SST
may fails due to duplication of some parameters (in particular
"--port") in the main part of the command line and after
"--mysqld-args", as well as due to incorrect interpretation
of the parameter "--port" passed after "--mysqld-args" when
the SST script is invoked without explicitly specifying a port
for SST. In addition, it is necessary to correctly handle spaces,
quotation marks and special characters when copying original
arguments from the argv[] array to a new command line (after
"--mysqld-args"). This patch resolves these shortcomings.
For MDEV-15955, the fix in create_tmp_field_from_item() would cause a
compilation error. After a discussion with Alexander Barkov, the fix
was omitted and only the test case was kept.
In 10.3 and later, MDEV-15955 is fixed properly by overriding
create_tmp_field() in Item_func_user_var.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Galera threads were not registered to performance schema and
used pthread_create when mysql_thread_create should have been
used.
Added test case to verify current galera performance schema
instrumentation does work.
now we can afford it. Fix -Werror errors. Note:
* old gcc is bad at detecting uninit variables, disable it.
* time_t is int or long, cast it for printf's
The second line of changes related to replacing xtrabackup with
mariabackup:
1) All unnecessary references to xtrabackup are removed from
the documentation, from some comments, from the control files
that are used to prepare the packages.
2) Made corrections of the tests from the galera_3nodes suite
that mentioned xtrabackup or the old (associated with xtrabackup)
version of innobackupex.
3) Fixed flaws in the galera_3nodes mtr suite control scripts,
because of which they could not work with mariabackup.
4) Fixed numerous bugs in the SST scripts and in the mtr test
files (galera_3nodes mtr suite) that prevented the use of Galera
with IPv6 addresses.
5) Fixed flaws in tests for rsync and mysqldump (for galera_3nodes
mtr tests suite). These tests were not performed successfully without
these fixes.
https://jira.mariadb.org/browse/MDEV-17835
The use of the xtrabackup and xtrabackup-v2 methods for SST
has been declared obsolete since version 10.2, now it cannot
be used because of the different redo log format. Accordingly,
we need to remove the xtrabackup-related scripts and dynamically
replace the call to xtrabackup[-v2] to the mariabackup (with a
corresponding warning in the log) when the server performs SST.
https://jira.mariadb.org/browse/MDEV-17835
Problem was that in SST log_bin_index name and directory was not
handled and passed to rsync SST script.
wsrep_sst_common.sh
Read binlog index dirname and filename if --binlog-index
parameter is provided. Read binlog filenames from that file
from donor and write transfered binlog filenames to that
file in joiner.
mysqld.cc, mysqld.h
Moved opt_binlog_index_name from static to global and added
it to extern.
wsrep_sst.cc
generate_binlog_index_opt_val
New function to generate binlog index name if opt_binlog_index_name is
given on configuration.
sst_prepare_other
Add binlog index configuration to SST command.
wsrep_sst.h
Add new SST parameter --binlog-index
Add test case.
extra/mariabackup/fil_cur.cc:361:42: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
extra/mariabackup/fil_cur.cc:376:9: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
sql/handler.cc:6196:45: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
sql/log.cc:1681:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/log.cc:1687:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/wsrep_sst.cc:1388:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
sql/wsrep_sst.cc:232:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
storage/connect/filamdbf.cpp:450:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/filamdbf.cpp:970:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/inihandl.cpp:197:16: warning: address of array 'key->name' will always evaluate to 'true' [-Wpointer-bool-conversion]
storage/innobase/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/buf/buf0buf.cc:5085:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/innobase/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/handler/ha_innodb.cc:18685:7: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
storage/innobase/row/row0mysql.cc:3319:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/row/row0mysql.cc:3327:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/maria/ma_norec.c:35:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_norec.c:42:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_test2.c:1009:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/maria/ma_test2.c:1010:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/mroonga/ha_mroonga.cpp:9189:44: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
storage/mroonga/vendor/groonga/lib/expr.c:4987:22: warning: comparison of constant -1 with expression of type 'grn_operator' is always false [-Wtautological-constant-out-of-range-compare]
storage/xtradb/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/buf/buf0buf.cc:5047:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/xtradb/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3324:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3332:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:120:35: warning: format specifies type 'unsigned long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:96:35: note: expanded from macro 'INFO_TAIL'
