The external 'for' loop in remove_dup_with_compare() handled
HA_ERR_RECORD_DELETED by just starting over without advancing
to the next record which caused an infinite loop.
This condition could be triggered on certain data by a SELECT
query containing DISTINCT, GROUP BY and HAVING clauses.
Fixed remove_dup_with_compare() so that we always advance to
the next record when receiving HA_ERR_RECORD_DELETED from
rnd_next().
Slave does not correctly handle "expected errors" leading to inconsistencies
between the mater and slave. Specifically, when a statement changes both
transactional and non-transactional tables, the transactional changes are
automatically rolled back on the master but the slave ignores the error and
does not roll them back thus leading to inconsistencies.
To fix the problem, we automatically roll back a statement that fails on
the slave but note that the transaction is not rolled back unless a "rollback"
command is in the relay log file.
The crash happens because select_union object is used as result set
for queries which have derived tables.
select_union use temporary table as data storage and if
fields count exceeds 10(count of values for procedure ANALYSE())
then we get a crash on fill_record() function.
binlog
Mixing transactional (T) and non-transactional (N) tables on behalf of a
transaction may lead to inconsistencies among masters and slaves in STATEMENT
mode. The problem stems from the fact that although modifications done to
non-transactional tables on behalf of a transaction become immediately visible
to other connections they do not immediately get to the binary log and therefore
consistency is broken. Although there may be issues in mixing T and M tables in
STATEMENT mode, there are safe combinations that clients find useful.
In this bug, we fix the following issue. Mixing N and T tables in multi-level
(e.g. a statement that fires a trigger) or multi-table table statements (e.g.
update t1, t2...) were not handled correctly. In such cases, it was not possible
to distinguish when a T table was updated if the sequence of changes was N and T.
In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect
that both a N and T tables were changed. To circumvent this issue, we check if an
engine is registered in the handler's list and changed something which means that
a T table was modified.
Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or
ROW modes completely safe.
The problem was that creating a DECIMAL column from a decimal
value could lead to a failed assertion as decimal values can
have a higher precision than those attached to a table. The
assert could be triggered by creating a table from a decimal
with a large (> 30) scale. Also, there was a problem in
calculating the number of digits in the integral and fractional
parts if both exceeded the maximum number of digits permitted
by the new decimal type.
The solution is to ensure that truncation procedure is executed
when deducing a DECIMAL column from a decimal value of higher
precision. If the integer part is equal to or bigger than the
maximum precision for the DECIMAL type (65), the integer part
is truncated to fit and the fractional becomes zero. Otherwise,
the fractional part is truncated to fit into the space left
after the integer part is copied.
This patch borrows code and ideas from Martin Hansson's patch.
INSERT ... SELECT ...
Problem was that when bulk insert is used on an empty
table/partition, it disables the indexes for better
performance, but in this specific case it also tries
to read from that partition using an index, which is
not possible since it has been disabled.
Solution was to allow index reads on disabled indexes
if there are no records.
Also reverted the patch for bug#38005, since that was a workaround
in the partitioning engine instead of a fix in myisam.
(temporary) TABLE, crash
Problem: if one has an open "HANDLER t1", further "TRUNCATE t1"
doesn't close the handler and leaves handler table hash in an
inconsistent state, that may lead to a server crash.
Fix: TRUNCATE should implicitly close all open handlers.
Doc. request: the fact should be described in the manual accordingly.
view that has Group By
Table access rights checking function check_grant() assumed
that no view is opened when it's called.
This is not true with nested views where the inner view
needs materialization. In this case the view is already
materialized when check_grant() is called for it.
This caused check_grant() to not look for table level
grants on the materialized view table.
Fixed by checking if a view is already materialized and if
it is check table level grants using the original table name
(not the ones of the materialized temp table).
on SHOW CREATE TRIGGER + MERGE table
Problem: SHOW CREATE TRIGGER erroneously relies on fact
that we have the only underlying table for a trigger
(wrong for merge tables).
Fix: remove erroneous assert().
In STATEMENT based replication, a statement that failed on the master but that
updated non-transactional tables is written to binary log with the error code
appended to it. On the slave, the statement is executed and the same error is
expected. However, when an "expected error" did not happen on the slave and was
either ignored or was related to a concurrency issue on the master, the slave
did not rollback the effects of the statement and as such inconsistencies might
happen.
To fix the problem, we automatically rollback a statement that should have
failed on a slave but succeded and whose expected failure is either ignored or
stems from a concurrency issue on the master.
There is an inconsistency with DROP DATABASE|TABLE|EVENT IF EXISTS and
CREATE DATABASE|TABLE|EVENT IF NOT EXISTS. DROP IF EXISTS statements are
binlogged even if either the DB, TABLE or EVENT does not exist. In
contrast, Only the CREATE EVENT IF NOT EXISTS is binlogged when the EVENT
exists.
This patch fixes the following cases for all the replication formats:
CREATE DATABASE IF NOT EXISTS.
CREATE TABLE IF NOT EXISTS,
CREATE TABLE IF NOT EXISTS ... LIKE,
CREAET TABLE IF NOT EXISTS ... SELECT.
Replication SQL thread does not set database default charset to
thd->variables.collation_database properly, when executing LOAD DATA binlog.
This bug can be repeated by using "LOAD DATA" command in STATEMENT mode.
This patch adds code to find the default character set of the current database
then assign it to thd->db_charset when slave server begins to execute a relay log.
The test of this bug is added into rpl_loaddata_charset.test
The problem is that the lexer could inadvertently skip over the
end of a query being parsed if it encountered a malformed multibyte
character. A specially crated query string could cause the lexer
to jump up to six bytes past the end of the query buffer. Another
problem was that the laxer could use unfiltered user input as
a signed array index for the parser maps (having upper and lower
bounds 0 and 256 respectively).
The solution is to ensure that the lexer only skips over well-formed
multibyte characters and that the index value of the parser maps
is always a unsigned value.
Problem 1:
When the 'Using index' optimization is used, the optimizer may still - after
cost-based optimization - decide to use another index in order to avoid using
a temporary table. But when this happens, the flag to the storage engine to
read index only (not table) was still set. Fixed by resetting the flag in the
storage engine and TABLE structure in the above scenario, unless the new index
allows for the same optimization.
Problem 2:
When a 'ref' access method was employed by cost-based optimizer, (when the column
is non-NULLable), it was assumed that it needed no initialization if 'quick' access
methods (since they are based on range scan). When ORDER BY optimization overrides
the decision, however, it expects to have this initialized and hence crashes.
Fixed in 5.1 (was fixed in 6.0 already) by initializing 'quick' even when there's
'ref' access.
when partition is reoganized.
Problem was that table->timestamp_field_type was not changed
before copying rows between partitions.
fixed by setting it to TIMESTAMP_NO_AUTO_SET as the first thing
in fast_alter_partition_table, so that all if-branches is covered.
column on partitioned table
An assertion 'ASSERT_COULUMN_MARKED_FOR_READ' is failed if the query
is executed with index containing double column on partitioned table.
The problem is that assertion expects all the fields which are read,
to be in the read_set.
In this query only the field 'a' is in the readset as the tables in
the query are joined by the field 'a' and so the assertion fails
expecting other field 'b'.
Since the function cmp() is just comparison of two parameters passed,
the assertion is not required.
Fixed by removing the assertion in the double fields comparision
function and also fixed the index initialization to do ordered
index scan with RW LOCK which ensures all the fields from a key are in
the read_set.
Note: this bug is not reproducible with other datatypes because the
assertion doesn't exist in comparision function for other
datatypes.
The server shutdown and start code triggered the valgrind failures
within nptl_pthread_exit_hack_handler on Ubuntu 9.04, x86 (but not amd64)
in rpl_trigger.test file.
For fixing the bug, suppress valgrind failures within nptl_pthread_exit_hack_handler
on Ubuntu 9.04, x86 (but not amd64). Because the server shutdown and start
code has been heavily used in mysql test set.
Install procedure does not copy *.inc files located under the mysql-test/t directory.
Therefore, this patch moves the rpl_trigger.inc to the mysql-test/include directory.
The test case fails sporadically on Windows while trying to overwrite an unused
binary log. The problem stems from the fact that MySQL on Windows does not
immediately unlock/release a file while the process that opened and closed it is
still running. In BUG 38603, this issue was circumvented by stopping the MySQL
process, copying the file and then restarting the MySQL process.
Unfortunately, such facilities are not available in the 5.0. Other approaches
such as stopping the slave and issuing change master do not work because the relay
log file and index are not closed when a slave is stopped. So to fix the problem,
we simply don't run on windows the part of the test that was failing.
