that is not in binlog.
Post-crash recovery of --rpl-semi-sync-slave-enabled server
failed to recognize a transaction in-doubt that needed rolled back.
A prepared-but-not-in-binlog transaction gets committed instead
to possibly create inconsistency with a master (e.g the way it was observed
in the bug report).
The semisync recovery is corrected now with initializing binlog coordinates
of any transaction in-doubt to the maximum offset which is
unreachable.
In effect when a prepared transaction that is not found in binlog
it will be decided to rollback because it's guaranteed to reside
in a truncated tail area of binlog.
Mtr tests are reinforced to cover the described scenario.
This commit sends a flag indicating the presence of the "--bypass"
option from the donor node to the joiner nodes during rsync IST,
because without such a flag it is impossible to distinguish IST
from the SST on the joiner nodes (in IST/SST scripts, because the
"--bypass" option is still not passed to scripts from server code).
Specifically, this fixes an issue with binary logs disappearing
after IST (via rsync). There are also changes to diagnostic messages
here that will make it easier to diagnose script-related problems
in the future when debugging and when checking the logs. This commit
also adds more robust signal handlers - to handle exceptions during
script execution. These handlers won't mask some crashes and it
also unifies exit codes between different scripts. These changes
have already been helpful to debugging "bypass" flag handling.
This commit fixes an issue with IST handling in
version 10.9 which is a regression after MDEV-26971
and related to trying to get a non-existent "total"
tag on the IST branch (this tag is only defined in
SST mode).
Function wsrep_read_only_option was already removed in commit
d54bc3c0d1 because it could cause race condition on variable
opt_readonly so that value OFF can become permanent.
Removed function again and added test case. Note that writes
to TEMPORARY tables are still allowed when read_only=ON.
The counters were added in commit 5e55d1ced5
and any code to update them was
inadvertently removed in commit 2e814d4702
when applying InnoDB changes from MySQL 5.7.
Let us remove these counters that never reported anything useful. If such
statistics are really needed in a special case, they can be obtained by
instrumenting the code by some means, such as eBPF or a source code patch.
This patch fixes a problem that arises when a Galera node acts as a
replica for native replication. When parallel applying is enabled, it
is possible to end up with attempts to write binlog events with gtids
out of order. This happens because when multiple events are delivered
from the native replication stream and applied in concurrently, it is
for them to be replicated to the Galera cluster in an order which is
different from the original order in which they were committed in the
aync replication master.
To correct this behavior we now wait_for_prior_commit() before
replicating changes though galera. As a consequence, parallel appliers
may apply events in parallel until the galera replication step, which
is now serialized.
Arythmetic can overrun the uint type when possible group_concat_max_len
is multiplied to collation.mbmaxlen (can easily be like 4).
So use ulonglong there for calculations.
If a slave received a fake GLLE event after a GTID event
it would terminate the group. This adds a test for the
previous commit which fixed this issue (939672a).
Review by Andrei Elkin <andrei.elkin@mariadb.com>
- This commit rely on MDEV-28391
- When temporary table shadows the base table, error is raised (it can be changed if needed),
since the procedure is relying on creating the views and view cannot be created from the temporary table.
- Reviewed by: <wlad@mariadb.com>
MDEV-21810 MBR: Unexpected "Unsafe statement" warning for unsafe IODKU
MDEV-17614 fixes to replication unsafety for INSERT ON DUP KEY UPDATE
on two or more unique key table left a flaw. The fixes checked the
safety condition per each inserted record with the idea to catch a user-created
value to an autoincrement column and when that succeeds the autoincrement column
would become the source of unsafety too.
It was not expected that after a duplicate error the next record's
write_set may become different and the unsafe decision for that
specific record will be computed to screw the Query's binlogging
state and when @@binlog_format is MIXED nothing gets bin-logged.
This case has been already fixed in 10.5.2 by 91ab42a823 that
relocated/optimized THD::decide_logging_format_low() out of the record insert
loop. The safety decision is computed once and at the right time.
Pertinent parts of the commit are cherry-picked.
Also a spurious warning about unsafety is removed when MIXED
@@binlog_format; original MDEV-17614 test result corrected.
The original test of MDEV-17614 is extended and made more readable.
Previously the correct SQL mode for a stored routine or
package was only set before doing the CREATE part, this
worked out for PROCEDUREs and FUNCTIONs, but with ORACLE
mode specific PACKAGEs the DROP also only works in ORACLE
mode.
Moving the setting of the sql_mode a few lines up to happen
right before the DROP statement is writen fixes this.
This is based on commit 20ae4816bb
with some adjustments for MDEV-12353.
row_ins_sec_index_entry_low(): If a separate mini-transaction is
needed to adjust the minimum bounding rectangle (MBR) in the parent
page, we must disable redo logging if the table is a temporary table.
For temporary tables, no log is supposed to be written, because
the temporary tablespace will be reinitialized on server restart.
rtr_update_mbr_field(), rtr_merge_and_update_mbr(): Changed the return
type to void and removed unreachable code. In older versions, these
used to return a different value for temporary tables.
page_id_t: Add constexpr to most member functions.
mtr_t::log_write(): Catch log writes to invalid tablespaces
so that the test case would crash without the fix to
row_ins_sec_index_entry_low().
row_ins_sec_index_entry_low(): If a separate mini-transaction is
needed to adjust the minimum bounding rectangle (MBR) in the parent
page, we must disable redo logging if the table is a temporary table.
For temporary tables, no log is supposed to be written, because
the temporary tablespace will be reinitialized on server restart.
rtr_update_mbr_field(): Plug a memory leak.
* FreeBSD returns errno 31 (EMLINK, Too many links),
not 40 (ELOOP, Too many levels of symbolic links)
* (`mysqlbinlog|mysql`) was just crazy, why did it ever work?
* socket_ipv6.inc check (that checked whether ipv6 is supported)
only worked correctly when ipv6 was supported
* perfschema.socket_summary_by_instance was changing global variables
and then skip-ing the test (because on missing ipv6)
- When arguments to the procedure contain quote in the name, procedure fails with parsing error.
The reason was because additional quoting is done when testing TEMPORARY table with the same name.
- Reviewed by: <wlad@mariadb.com>
Grep is not safe as it will confuse if there is more than one
matching line or if progress report is slightly different as
progress reporting is afected by how fast IST is send/received.
Fix is to use sed and we are interested only that there is at
least one progress report from IST.
Problem:
========
InnoDB DDL fails to remove the newly added table or index from
dictionary and index stub from the table cache if the alter
transaction encounters DEADLOCK error in commit phase.
Solution:
========
Restart the alter table transaction if it encounters DEADLOCK
in commit phase. So that index stubs and index, table removal from
dictionary can be done in rollback_inplace_alter_table()
- Added one assert in rollback_inplace_alter_table() to indicate that
the online log for the old table shouldn't exist.
When "mariabackup --target-dir=$basedir --incremental-dir=$incremental_dir"
is running and is moving a new table file (e.g. `db1/t1.new`) from the
incremental directory to the base directory, it needs to verify that the base
backup database directory (e.g. `$basedir/db1`) really exists
(or create it otherwise).
The table `db1/t1` can come from a new database `db1` which
was created during the base mariabackup execution time.
In such case the directory `db1` exists only in the incremental directory,
but does not exist in the base directory.
Moved LIMIT warning from vers_set_hist_part() to new call
vers_check_limit() at table unlock phase. At that point
read_partitions bitmap is already pruned by DML code (see
prune_partitions(), find_used_partitions()) so we have to set
corresponding bits for working history partition.
Also we don't do my_error(ME_WARNING|ME_ERROR_LOG), because at that
point it doesn't update warnings number, so command reports 0 warnings
(but warning list is still updated). Instead we do
push_warning_printf() and sql_print_warning() separately.
Under LOCK TABLES external_lock(F_UNLCK) is not executed. There is
start_stmt(), but no corresponding "stop_stmt()". So for that mode we
call vers_check_limit() directly from close_thread_tables().
Test result has been changed according to new LIMIT and warning
printing algorithm. For convenience all LIMIT warnings are marked with
"You see warning above ^".
TODO MDEV-20345 fixed. Now vers_history_generating() contains
fine-grained list of DML-commands that can generate history (and TODO
mechanism worked well).
