In Item_param::set_from_user_var
value.cs_info.character_set_client is set
to 'fromcs' value. It's wrong, it should be set to
thd->variables.character_set_client.
When opening a table, it is imperative that the flag
TABLE::auto_increment_field_not_null be false. But if an error occured during
the creation of a table (e.g. the table exists already) with an auto_increment
column and a BEFORE trigger that used the INSERT ... SELECT construct, the
flag was not reset until after error checking. Thus if an error occured,
select_insert::send_data() returned immediately and it was not reset (see * in
pseudocode below). Crash happened if the table was opened again. Fixed by
resetting the flag after error checking.
nested-loops_join():
for each row in SELECT table {
select_insert::send_data():
if a values is supplied for AUTO_INCREMENT column
table->auto_increment_field_not_null= TRUE
else
table->auto_increment_field_not_null= FALSE
if (error)
return 1; *
if (table->auto_increment_field_not_null == FALSE)
...
table->auto_increment_field_not_null == FALSE
}
<-- table returned to table cache and later retrieved by open_table:
open_table():
assert(table->auto_increment_field_not_null)
1. BUG#45357 - 5.1.35 crashes with Failing assertion: index->type & DICT_CLUSTERED
2. Also fixes the compilation problem when the flag -DUNIV_MUST_NOT_INLINE
Detailed revision comments:
r5340 | marko | 2009-06-17 12:11:49 +0300 (Wed, 17 Jun 2009) | 4 lines
branches/5.1: row_unlock_for_mysql(): When the clustered index is unknown,
refuse to unlock the record.
(Bug #45357, caused by the fix of Bug #39320).
rb://132 approved by Sunny Bains.
r5339 | marko | 2009-06-17 11:01:37 +0300 (Wed, 17 Jun 2009) | 2 lines
branches/5.1: Add missing #include "mtr0log.h" so that the code compiles
with -DUNIV_MUST_NOT_INLINE.
Details:
- Limit the queries to character sets and collations
which are most probably available in all build types.
But try to preserve the intention of the tests.
- Remove the variants adjusted to some build types.
Note:
1. The results of the review by Bar are included.
2. I am not able to check the correctness of this patch
on any existing build type and any MySQL version.
So it could happen that the new test fails somewhere.
Inconsistent behavior of session variable max_allowed_packet
(and net_buffer_length); only assignment to the global variable
has any effect, without this being obvious to the user.
The patch for Bug#22891 is backported to 5.0, making the two
session variables read-only. As this is a backport to GA
software, the error used when trying to assign to the read-
only variable is ER_UNKNOWN_ERROR. The error message is the
same as in 5.1+.
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
Item_func_spatial_collection::val_str
When the concatenation function for geometry data collections
reads the binary data it was not rigorous in checking that there
is data available, leading to invalid reads and crashes.
Fixed by making checking stricter.
This patch corrects a misstake in the test case for bug patch 43658.
There was a race in the test case when the thread id was retrieved from the processlist.
The result was that the same thread id was signalled twice and one thread id wasn't
signalled at all.
The affected platforms appears to be limited to linux.
------------------------------------------------------------------------
r5233 | marko | 2009-06-03 15:12:44 +0300 (Wed, 03 Jun 2009) | 11 lines
branches/5.1: Merge the test case from r5232 from branches/5.0:
------------------------------------------------------------------------
r5232 | marko | 2009-06-03 14:31:04 +0300 (Wed, 03 Jun 2009) | 21 lines
branches/5.0: Merge r3590 from branches/5.1 in order to fix Bug #40565
(Update Query Results in "1 Row Affected" But Should Be "Zero Rows").
Also, add a test case for Bug #40565.
rb://128 approved by Heikki Tuuri
------------------------------------------------------------------------
------------------------------------------------------------------------
r5243 | sunny | 2009-06-04 03:17:14 +0300 (Thu, 04 Jun 2009) | 14 lines
branches/5.1: When the InnoDB and MySQL data dictionaries go out of sync, before
the bug fix we would assert on missing autoinc columns. With this fix we allow
MySQL to open the table but set the next autoinc value for the column to the
MAX value. This effectively disables the next value generation. INSERTs will
fail with a generic AUTOINC failure. However, the user should be able to
read/dump the table, set the column values explicitly, use ALTER TABLE to
set the next autoinc value and/or sync the two data dictionaries to resume
normal operations.
Fix Bug#44030 Error: (1500) Couldn't read the MAX(ID) autoinc value from the
index (PRIMARY)
rb://118
------------------------------------------------------------------------
r5252 | sunny | 2009-06-04 10:16:24 +0300 (Thu, 04 Jun 2009) | 2 lines
branches/5.1: The version of the result file checked in was broken in r5243.
------------------------------------------------------------------------
r5259 | vasil | 2009-06-05 10:29:16 +0300 (Fri, 05 Jun 2009) | 7 lines
branches/5.1:
Remove the word "Error" from the printout because the mysqltest suite
interprets it as an error and thus the innodb-autoinc test fails.
Approved by: Sunny (via IM)
------------------------------------------------------------------------
r5339 | marko | 2009-06-17 11:01:37 +0300 (Wed, 17 Jun 2009) | 2 lines
branches/5.1: Add missing #include "mtr0log.h" so that the code compiles
with -DUNIV_MUST_NOT_INLINE.
(null merge; this had already been committed in branches/zip)
------------------------------------------------------------------------
r5340 | marko | 2009-06-17 12:11:49 +0300 (Wed, 17 Jun 2009) | 4 lines
branches/5.1: row_unlock_for_mysql(): When the clustered index is unknown,
refuse to unlock the record.
(Bug #45357, caused by the fix of Bug #39320).
rb://132 approved by Sunny Bains.
------------------------------------------------------------------------
The assertion in String::copy was added in order to avoid
valgrind errors when the destination was the same as the source.
Eased restriction to allow for the case when str == NULL.
Early patch submitted for discussion.
It is possible for more than one thread to enter the condition
in query_cache_insert(), but the condition predicate is to
signal one thread each time the cache status changes between
the following states: {NO_FLUSH_IN_PROGRESS,FLUSH_IN_PROGRESS,
TABLE_FLUSH_IN_PROGRESS}
Consider three threads THD1, THD2, THD3
THD2: select ... => Got a writer in ::store_query
THD3: select ... => Got a writer in ::store_query
THD1: flush tables => qc status= FLUSH_IN_PROGRESS;
new writers are blocked.
THD2: select ... => Still got a writer and enters cond in
query_cache_insert
THD3: select ... => Still got a writer and enters cond in
query_cache_insert
THD1: flush tables => finished and signal status change.
THD2: select ... => Wakes up and completes the insert.
THD3: select ... => Happily waiting for better times. Why hurry?
This patch is a refactoring of this lock system. It introduces four new methods:
Query_cache::try_lock()
Query_cache::lock()
Query_cache::lock_and_suspend()
Query_cache::unlock()
This change also deprecates wait_while_table_flush_is_in_progress(). All threads are
queued and put on a conditional wait. On each unlock the queue is signalled. This resolve
the issues with left over threads. To assure that no threads are spending unnecessary
time waiting a signal broadcast is issued every time a lock is taken before a full
cache flush.
crashes server!
The problem affects the scenario when index merge is followed by a filesort
and the sort buffer is not big enough for all the sort keys.
In this case the filesort function will read the data to the end through the
index merge quick access method (and thus closing the cursor etc),
but will leave the pointer to the quick select method in place.
It will then create a temporary file to hold the results of the filesort and
will add it as a sort output file (in sort.io_cache).
Note that filesort will copy the original 'sort' structure in an automatic
variable and restore it after it's done.
As a result at exiting filesort() we have a sort.io_cache filled in and
nothing else (as a result of close of the cursors at end of reading data
through index merge).
Now create_sort_index() will note that there is a select and will clean it up
(as it's been used already by filesort() reading the data in). While doing that
a special case in the index merge destructor will clean up the sort.io_cache,
assuming it's an output of the index merge method and is not needed anymore.
As a result the code that tries to read the data back from the filesort output
will get no data in both memory and disk and will crash.
Fixed similarly to how filesort() does it : by copying the sort.io_cache structure
to a local variable, removing the pointer to the io_cache (so that it's not freed
by QUICK_INDEX_MERGE_SELECT::~QUICK_INDEX_MERGE_SELECT) and restoring the original
structure (together with the valid pointer) after the cleanup is done.
This is a safe thing to do because all the structures are already cleaned up by
hitting the end of the index merge's read method (QUICK_INDEX_MERGE_SELECT::get_next())
and the cleanup code being written in a way that tolerates repeating cleanups.
The SQL-mode PAD_CHAR_TO_FULL_LENGTH could prevent a DROP USER
statement from privileges associated with the user being dropped.
What ocurred was that reading from the User and Host fields of
the tables tables_priv or columns_priv would yield values padded
with spaces, causing a failure to match a specified user or host
('user' != 'user ');
The solution is to disregard the PAD_CHAR_TO_FULL_LENGTH mode
when iterating over and matching values in the privileges tables
for a DROP USER statement.
statements missed from general log
A refinement of the test in the previous patch to avoid
using sleep as a means to ensure that timestamps are
added to the log entries.
