A failed REVOKE statement is logged with error=0, thus causing
the slave to stop. The slave should not stop as this was an
expected error. Given that the execution failed on the master as
well the error code should be logged so that the slave can replay
the statement, get an error and compare with the master's
execution outcome. If errors match, then slave can proceed with
replication, as the error it got, when replaying the statement,
was expected.
In this particular case, the bug surfaces because the error code
is pushed to the THD diagnostics area after writing the event to
the binary log. Therefore, it would be logged with the THD
diagnostics area clean, hence its error code would not contain
the correct code.
We fix this by moving the error reporting ahead of the call to
the routine that writes the event to the binary log.
(Original patch by Sinisa Milivojevic)
The YEAR(4) value of 2000 was equal to the "bad" YEAR(4) value of 0000.
The get_year_value() function has been modified to not adjust bad
YEAR(4) value to 2000.
The problem is that when we make conditon for
grouped result const part of condition is cut off.
It happens because some parts of 'having' condition
which refer to outer join become const after
make_join_statistics. These parts may be lost
during further having condition transformation
in JOIN::exec. The fix is adding 'having'
condition check for const tables after
make_join_statistics is performed.
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
This has been back-ported from 6.0 as the problems proved to afflict
5.1 as well.
The fix exposed two new bugs. They were reported as follows.
Bug no 52174: Sometimes wrong plan when reading a MAX value
from non-NULL index
Bug no 52173: Reading NULL value from non-NULL index gives wrong
result in embedded server
Both bugs taken together affect a much smaller class of queries than #47762,
so the fix stays for now.
Optimizer erroneously translated LEFT JOIN into INNER JOIN.
It leads to cutting rows with NULL right side. It happens
because Item_row uses not_null_tables() method form the
base(Item) class and does not calculate 'null tables'
properly. The fix is adding calculation of 'not null tables'
to Item_row.
The crash happens because of discrepancy between values of
conts_tables and join->const_table_map(make_join_statisctics).
Calculation of conts_tables used condition with
HA_STATS_RECORDS_IS_EXACT flag check. Calculation of
join->const_table_map does not use this flag check.
In case of MERGE table without union with index
the table does not become const table and
thus join_read_const_table() is not called
for the table. join->const_table_map supposes
this table is const and later in make_join_select
this table is used for making&calculation const
condition. As table record buffer is not populated
it leads to crash.
The fix is adding a check if an engine supports
HA_STATS_RECORDS_IS_EXACT flag before updating
join->const_table_map.
reverse DNS lookup of "localhost" returns "broadcasthost" on Snow Leopard, and NULL on most others.
Simply ignore the output, as this is not an essential part of UDF testing.
for InnoDB
The class Field_bit_as_char stores the metadata for the
field incorrecly because bytes_in_rec and bit_len are set
to (field_length + 7 ) / 8 and 0 respectively, while
Field_bit has the correct values field_length / 8 and
field_length % 8.
Solved the problem by re-computing the values for the
metadata based on the field_length instead of using the
bytes_in_rec and bit_len variables.
To handle compatibility with old server, a table map
flag was added to indicate that the bit computation is
exact. If the flag is clear, the slave computes the
number of bytes required to store the bit field and
compares that instead, effectively allowing replication
*without conversion* from any field length that require
the same number of bytes to store.
definition at engine
If a single ALTER TABLE contains both DROP INDEX and ADD INDEX using
the same index name (a.k.a. index modification) we need to disable
in-place alter table because we can't ask the storage engine to have
two copies of the index with the same name even temporarily (if we
first do the ADD INDEX and then DROP INDEX) and we can't modify
indexes that are needed by e.g. foreign keys if we first do
DROP INDEX and then ADD INDEX.
Fixed the problem by disabling in-place ALTER TABLE for these cases.
concurrent I_S query
There were two problem:
1) MYSQL_LOCK_IGNORE_FLUSH also ignored name locks
2) there was a race between abort_and_upgrade_locks and
alter_close_tables
(i.e. remove_table_from_cache and
close_data_files_and_morph_locks)
Which allowed the table to be opened with MYSQL_LOCK_IGNORE_FLUSH flag
resulting in renaming a partition that was already in use,
which could cause the table to be unusable.
Solution was to not allow IGNORE_FLUSH to skip waiting for
a named locked table.
And to not release the LOCK_open mutex between the
calls to remove_table_from_cache and
close_data_files_and_morph_locks by merging the functions
abort_and_upgrade_locks and alter_close_tables.
NULL column for NULL
The optimization to read MIN() and MAX() values from an
index did not properly handle comparisons with NULL
values. Fixed by giving up the particular optimization step
if there are non-NULL safe comparisons with NULL values, as
the result is NULL anyway.
Also, Oracle copyright notice was added to all files.
Base Tables
The type inferrence of a view column caused the result to be
interpreted as the wrong type: DATE colums were interpreted
as TIME and TIME as DATETIME. This happened because view
columns are represented by Item_ref objects as opposed to
Item_field's. Item_ref had no method for retrieving a TIME
value and thus was forced to depend on the default
implementation for any expression, which caused the
expression to be evaluated as a string and then parsed into
a TIME/DATETIME value.
Fixed by letting Item_ref classes forward the request for a
TIME value to the referred Item - which is a field in this
case - this reads the TIME value directly without
conversion.
index cardinalities=1
Parallel repair didn't poroperly update index cardinality
in certain cases.
When myisam_sort_buffer_size is not enough to store all
keys, index cardinality was updated before index was
actually written, when no index statistic is available.
------------------------------------------------------------------------
r6774 | calvin | 2010-03-03 23:56:10 +0200 (Wed, 03 Mar 2010) | 2 lines
Changed paths:
M /branches/5.1/trx/trx0sys.c
branches/5.1: fix bug#51653: outdated reference to set-variable
Non functional change.
------------------------------------------------------------------------
r6780 | vasil | 2010-03-08 19:13:20 +0200 (Mon, 08 Mar 2010) | 4 lines
Changed paths:
M /branches/5.1/plug.in
branches/5.1:
Whitespace fixup.
------------------------------------------------------------------------
r6783 | jyang | 2010-03-09 17:54:14 +0200 (Tue, 09 Mar 2010) | 9 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/mysql-test/innodb_bug21704.result
A /branches/5.1/mysql-test/innodb_bug47621.result
A /branches/5.1/mysql-test/innodb_bug47621.test
branches/5.1: Fix bug #47621 "MySQL and InnoDB data dictionaries
will become out of sync when renaming columns". MySQL does not
provide new column name information to storage engine to
update the system table. To avoid column name mismatch, we shall
just request a table copy for now.
rb://246 approved by Marko.
------------------------------------------------------------------------
r6785 | vasil | 2010-03-10 09:04:38 +0200 (Wed, 10 Mar 2010) | 11 lines
Changed paths:
M /branches/5.1/mysql-test/innodb_bug38231.test
branches/5.1:
Add the missing --reap statements in innodb_bug38231.test. Probably MySQL
enforced the presence of those recently and the test started failing like:
main.innodb_bug38231 [ fail ]
Test ended at 2010-03-10 08:48:32
CURRENT_TEST: main.innodb_bug38231
mysqltest: At line 49: Cannot run query on connection between send and reap
------------------------------------------------------------------------
r6788 | vasil | 2010-03-10 10:53:21 +0200 (Wed, 10 Mar 2010) | 8 lines
Changed paths:
M /branches/5.1/mysql-test/innodb_bug38231.test
branches/5.1:
In innodb_bug38231.test: replace the fragile sleep 0.2 that depends on timing
with a more robust condition which waits for the TRUNCATE and LOCK commands
to appear in information_schema.processlist. This could also break if there
are other sessions executing the same SQL commands, but there are none during
the execution of the mysql test.
------------------------------------------------------------------------
(regression)
Problem was that partition pruning did not exclude the
last partition if the range was beyond it
(i.e. not using MAXVALUE)
Fix was to not include the last partition if the
partitioning function value was not within the partition
range.
