- adjusted a test result according to the change made for MDEV-6100;
- added explicit timezone for engines/iuds, since MTR in
MariaDB does not set it like MySQL's, and tests with constant TIMESTAMP
can have different outcome
DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
- as of 5.5.27, YEAR(2) is deprecated, hence the new warning;
- MDEV-553 - different error code/message on out-of-range autoincrement;
- INSERT IGNORE now produces a warning if a duplicate was encountered (change pushed along with MDEV-553)
=== Problem ===
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in
mysql-5.1 given as:
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
=== Fix ===
1) Fixed the code for failure seen in rpl.rpl_row_until.
This test was also failing although the symptoms of
failure were different.
2) Copied the contents from rpl.rpl_row_until into
into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.
=== Problem ===
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in
mysql-5.1 given as:
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
=== Fix ===
1) Fixed the code for failure seen in rpl.rpl_row_until.
This test was also failing although the symptoms of
failure were different.
2) Copied the contents from rpl.rpl_row_until into
into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.
mysql-test/suite/engines/funcs/r/rpl_row_until.result:
modified to accomodate the changes in corresponding
test file.
mysql-test/suite/engines/funcs/t/disabled.def:
removed from the list of disabled tests.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
fixed rpl.rpl_row_until and copied its content to
engines/funcs.rpl_row_until. The reason being both
are same tests but rpl.rpl_row_until is an
updated version.
mysql-test/suite/rpl/t/disabled.def:
removed from the list of disabled tests.
sql/sql_repl.cc:
Added a check to catch an improper combination
of arguements passed to 'START SLAVE UNTIL'. Earlier,
START SLAVE UNTIL MASTER_LOG_FILE='master-bin.000001',
MASTER_LOG_POS=561, RELAY_LOG_POS=12;
passed. It is now detected and an error is reported.
Following reasons caused mismatches:
- different handling of invalid values;
- different CAST results with fractional seconds;
- microseconds support in MariaDB;
- different algorithm of comparing temporal values;
- differences in error and warning texts and codes;
- different approach to truncating datetime values to time;
- additional collations;
- different record order for queries without ORDER BY;
- MySQL bug#66034.
More details in MDEV-369 comments.
Print the warning(note):
YEAR(x) is deprecated and will be removed in a future release. Please use YEAR(4) instead
on "CREATE TABLE ... YEAR(x)" or "ALTER TABLE MODIFY ... YEAR(x)", where x != 4
Print the warning(note):
YEAR(x) is deprecated and will be removed in a future release. Please use YEAR(4) instead
on "CREATE TABLE ... YEAR(x)" or "ALTER TABLE MODIFY ... YEAR(x)", where x != 4
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
mysql-test-run auto-disables all optional plugins.
mysql-test/include/default_client.cnf:
no @OPT.plugindir anymore
mysql-test/include/default_mysqld.cnf:
don't disable plugins manually - mtr can do it better
mysql-test/suite/innodb/t/innodb_bug47167.test:
mtr now uses suite-dir as an include path
mysql-test/suite/innodb/t/innodb_file_format.test:
mtr now uses suite-dir as an include path
mysql-test/t/partition_binlog.test:
this test uses partitions
storage/example/mysql-test/mtr/t/source.result:
update results. as mysqltest includes the correct overlayed include
storage/innobase/handler/ha_innodb.cc:
the assert is wrong
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
