Problem is that page compressed tables currently require atomic_blobs and
that feature is not availabe currently for row_format=redundant.
Fix: Disallow page compressed create option if table row_format=redundant.
The problem is that the binlog position is updated before
Executed_log_entries and Slave_SQL_State. So, it's possible to hit
the moment when MASTER_POS_WAIT (and hence sync_with_master) already
returned success, but Slave_SQL_State and Executed_log_entries were not
modified yet.
Fixing it by adding a wait on the expected Executed_log_entries value.
in mysql_upgrade: do FLUSH PRIVILEGES at the end, not together with
mysql_fix_privilege_tables
mysql-test/t/mysql_upgrade-6984.opt:
use a dummy second option to force server restart after the test
use the same restriction for character_set_client on the command line
and from SQL.
Also: remove strange hack from thd_init_client_charset() that contradicted
the manual (collation_connection and character_set_result were not always set)
ALTER TABLE: don't fill default values per row, do it once.
And do it in two places - for copy_data_between_tables() and for online ALTER.
Also, run function_defaults test both for MyISAM and for InnoDB.
change SSL methods to be SSLv23 (according to openssl manpage:
"A TLS/SSL connection established with these methods may understand
the SSLv2, SSLv3, TLSv1, TLSv1.1 and TLSv1.2 protocols") from
TLSv1 methods, that go back to the initial SSL implementation
in MySQL in 2001.
OpenSSL default ciphers are different if TLSv1.2 is enabled,
so tests need to take this into account.
MDEV-6789 segfault in Item_func_from_unixtime::get_date on updating table with virtual columns
* prohibit VALUES in partitioning expression
* prohibit user and system variables in virtual column expressions
* fix Item_func_date_format to cache locale (for %M/%W to return the same as MONTHNAME/DAYNAME)
* fix Item_func_from_unixtime to cache time_zone directly, not THD (and not to crash)
* added tests for other incorrectly allowed (in vcols) functions to see that they don't crash
A "field" could be either an Item_field or
(if loading into a view) an Item_direct_ref that references Item_field.
Also: when iterating fields, use fields of the TABLE_LIST (table or view),
not fields of a TABLE (actual underlying table - might have more columns).
MDEV-6971 Bad results with joins comparing TIME and DOUBLE/DECIMAL columns
Disallow using indexes on non-temporal columns to optimize
ref access, range access and table elimination when the counterpart's
cmp_type is TIME_RESULT, e.g.:
SELECT * FROM t1 WHERE indexed_int_column=time_expression;
Only index on a temporal column can be used to optimize temporal comparison
operations.
The test case rpl.rpl_parallel_temptable deliberately crashes the master
server as part of the testing. This makes it unsuitable for Valgrind
testing. So make sure that it will be skipped when testing with Valgrind.
Merge Facebook commit cd063ab930
authored by Peng Tian from https://github.com/facebook/mysql-5.6
Introduced a new configuration variable innodb_fatal_semaphore_wait_threshold,
it makes the fatal semaphore timeout configurable. Modified original commit
so that no MariaDB server files are changed, instead introduced a new
InnoDB/XtraDB configuration variable.
Its default/min/max vlaues are 600/1/2^32-1 in seconds (it was hardcoded
as 600, now its default value is 600, so the default behavior of this diff
should be no change).
The real problem here was inconsistent handling of entry->commit_errno in
MYSQL_BIN_LOG::write_transaction_or_stmt(). Some return paths were setting it
to the value of errno, some where not. And the setting was redundant anyway,
as it is set consistently by the caller.
Fix by consistently setting it in the caller, and not in each return path in
the function.
The test failure happened because a DBUG_EXECUTE_IF() used in the test case
set an entry->commit_errno that was immediately overwritten in the caller with
whatever happened to be the value of errno. This could lead to different error
message in the .result file.
reset default fields not for every modified row, but only once,
at the beginning, as the set of modified fields doesn't change.
exception: INSERT ... ON DUPLICATE KEY UPDATE - the set of fields
does change per row and in that case we reset default fields per row.
This bug was seen when parallel replication experienced a deadlock between
transactions T1 and T2, where T2 has reached the commit phase and is waiting
for T1 to commit first. In this case, the deadlock is broken by sending a kill
to T2; that kill error is then later detected and converted to a deadlock
error, which causes T2 to be rolled back and retried.
The problem was that the kill caused ha_commit_trans() to errorneously call
wakeup_subsequent_commits() on T3, signalling it to abort because T2 failed
during commit. This is incorrect, because the error in T2 is only a temporary
error, which will be resolved by normal transaction retry. We should not
signal error to the next transaction until we have executed the code that
handles such temporary errors.
So this patch just removes the calls to wakeup_subsequent_commits() from
ha_commit_trans(). They are incorrect in this case, and they are not needed in
general, as wakeup_subsequent_commits() must in any case be called in
finish_event_group() to wakeup any transactions that may have started to wait
after ha_commit_trans(). And normally, wakeup will in fact have happened
earlier, either from the binlog group commit code, or (in case of no
binlogging) after the fast part of InnoDB/XtraDB group commit.
The symptom of this bug was that replication would break on some transaction
with "Commit failed due to failure of an earlier commit on which this one
depends", but with no such failure of an earlier commit visible anywhere.
The retry of an event group in parallel replication set the wrong value for
the end log position of the event that was retried
(qev->future_event_relay_log_pos). It was too large by the size of the event,
so it pointed into the middle of the following event.
If the retry happened in the very last event of the event group, _and_ the SQL
thread was stopped just after successfully retrying that event, then the SQL
threads's relay log position would be left incorrect. Restarting the SQL
thread could then try to read events from a garbage offset in the relay log,
usually leading to an error about not being able to read the event.
The code in binlog group commit around wait_for_commit that controls commit
order, did the wakeup of subsequent commits early, as soon as a following
transaction is put into the group commit queue, but before any such commit has
actually taken place. This causes problems with too early wakeup of
transactions that need to wait for prior to commit, but do not take part in
the binlog group commit for one reason or the other.
This patch solves the problem, by moving the wakeup to happen only after the
binlog group commit is completed.
This requires a new solution to ensure that transactions that arrive later
than the leader are still able to participate in group commit. This patch
introduces a flag wait_for_commit::commit_started. When this is set, a waiter
can queue up itself in the group commit queue.
This way, effectively the wait_for_prior_commit() is skipped only for
transactions that participate in group commit, so that skipping the wait is
safe. Other transactions still wait as needed for correctness.
setting of innodb_io_capacity_max
(a) Changed the behaviour so that if you set innodb_io_capacity to a
value > innodb_io_capacity_max that the value is accepted AND
that innodb_io_capacity_max = innodb_io_capacity * 2.
(b) If someone wants to reduce innodb_io_capacity_max and
reduce it below innodb_io_capacity then innodb_io_capacity
should be reduced to the same level as innodb_io_capacity_max.
In both cases give a warning to user.
main.information_schema: added a condition to the query to exclude perfschema tables
main.information_schema_all_engines: added a call to the include file to check for the presence of perfschema
When parsing a field declaration, grab type information from LEX before it's overwritten
by further rules. Pass type information through the parser stack to the rule that needs it.
The test complains that the server failed to disappear upon shutdown /
wait_for_disconnect. Trying to solve the probably race condition by
adding a wait before restart.
The test case had a classic mistake: SET DEBUG_SYNC='now SIGNAL xxx'
followed immediately by SET DEBUG_SYNC='RESET'. This makes it
possible for the waiter to miss the signal, if it does not manage
to wake up prior to the RESET.
The test cases had some --replace_result $USER USER. The problem is that the
value of $USER can be anything, depending on the name of the unix account that
runs the test suite. So random parts of the result can be errorneously
replaced, causing test failures.
Fix by making the replacements more specific, so they will match only the
intended stuff regardless of the value of $USER.
Merged Facebook commit 617aef9f911d825e9053f3d611d0389e02031225
authored by Inaam Rana to InnoDB storage engine (not XtraDB)
from https://github.com/facebook/mysql-5.6
WL#7047 - Optimize buffer pool list scans and related batch processing
Reduce excessive scanning of pages when doing flush list batches. The
fix is to introduce the concept of "Hazard Pointer", this reduces the
time complexity of the scan from O(n*n) to O.
The concept of hazard pointer is reversed in this work. Academically
hazard pointer is a pointer that the thread working on it will declar
such and as long as that thread is not done no other thread is allowe
do anything with it.
In this WL we declare the pointer as a hazard pointer and then if any
thread attempts to work on it, it is allowed to do so but it has to a
the hazard pointer to the next valid value. We use hazard pointer sol
reverse traversal of lists within a buffer pool instance.
Add an event to control the background flush thread. The background f
thread wait has been converted to an os event timed wait so that it c
signalled by threads that want to kick start a background flush when
buffer pool is running low on free/dirty pages.
