The cause of the crash was that test was setting
aria_sort_buffer_size to MAX_LONG_LONG, which caused an overflow in
my_malloc() when trying to allocate the buffer + 8 bytes.
Fixed by reducing max size of sort_buffer for Aria and MyISAM
Other things:
- Added code in maria_repair_parallell() to not allocate a big sort buffer
for small files.
- Updated size of minumim sort buffer in Aria
MDEV-16026: Forbid global system_versioning_asof in non-default time zone
* store `system_versioning_asof` in unix time;
* both session and global vars are processed in session timezone;
* setting `default` does not copy global variable anymore. Instead, it sets
system_time to SYSTEM_TIME_UNSPECIFIED, which means that no 'AS OF' time
is applied and `now()` can be assumed
As a regression, we cannot assign values below 1970 (UTC) anymore
MDEV-16481: set global system_versioning_asof=sf() crashes in specific case
* sys_vars.h: add `MYSQL_TIME` field to `set_var::save_result`
* sys_vars.ic: get rid of calling `var->value->get_date()` from
`Sys_var_vers_asof::update()`
* versioning.sysvars: add test; remove double warning
refactor Sys_var_vers_asof
* inherit from sys_var rather than Sys_var_enum
* remove junk "DEFAULT" keyword. There is DEFAULT in SQL grammar for it.
* make all conversions in check() to avoid possible errors
* avoid double var->value evaluation, which could
consequence in undefined behavior
The easiest way to compile and test the server with UBSAN is to run:
./BUILD/compile-pentium64-ubsan
and then run mysql-test-run.
After this commit, one should be able to run this without any UBSAN
warnings. There is still a few compiler warnings that should be fixed
at some point, but these do not expose any real bugs.
The 'special' cases where we disable, suppress or circumvent UBSAN are:
- ref10 source (as here we intentionally do some shifts that UBSAN
complains about.
- x86 version of optimized int#korr() methods. UBSAN do not like unaligned
memory access of integers. Fixed by using byte_order_generic.h when
compiling with UBSAN
- We use smaller thread stack with ASAN and UBSAN, which forced me to
disable a few tests that prints the thread stack size.
- Verifying class types does not work for shared libraries. I added
suppression in mysql-test-run.pl for this case.
- Added '#ifdef WITH_UBSAN' when using integer arithmetic where it is
safe to have overflows (two cases, in item_func.cc).
Things fixed:
- Don't left shift signed values
(byte_order_generic.h, mysqltest.c, item_sum.cc and many more)
- Don't assign not non existing values to enum variables.
- Ensure that bool and enum values are properly initialized in
constructors. This was needed as UBSAN checks that these types has
correct values when one copies an object.
(gcalc_tools.h, ha_partition.cc, item_sum.cc, partition_element.h ...)
- Ensure we do not called handler functions on unallocated objects or
deleted objects.
(events.cc, sql_acl.cc).
- Fixed bugs in Item_sp::Item_sp() where we did not call constructor
on Query_arena object.
- Fixed several cast of objects to an incompatible class!
(Item.cc, Item_buff.cc, item_timefunc.cc, opt_subselect.cc, sql_acl.cc,
sql_select.cc ...)
- Ensure we do not do integer arithmetic that causes over or underflows.
This includes also ++ and -- of integers.
(Item_func.cc, Item_strfunc.cc, item_timefunc.cc, sql_base.cc ...)
- Added JSON_VALUE_UNITIALIZED to json_value_types and ensure that
value_type is initialized to this instead of to -1, which is not a valid
enum value for json_value_types.
- Ensure we do not call memcpy() when second argument could be null.
- Fixed that Item_func_str::make_empty_result() creates an empty string
instead of a null string (safer as it ensures we do not do arithmetic
on null strings).
Other things:
- Changed struct st_position to an OBJECT and added an initialization
function to it to ensure that we do not copy or use uninitialized
members. The change to a class was also motived that we used "struct
st_position" and POSITION randomly trough the code which was
confusing.
- Notably big rewrite in sql_acl.cc to avoid using deleted objects.
- Changed in sql_partition to use '^' instead of '-'. This is safe as
the operator is either 0 or 0x8000000000000000ULL.
- Added check for select_nr < INT_MAX in JOIN::build_explain() to
avoid bug when get_select() could return NULL.
- Reordered elements in POSITION for better alignment.
- Changed sql_test.cc::print_plan() to use pointers instead of objects.
- Fixed bug in find_set() where could could execute '1 << -1'.
- Added variable have_sanitizer, used by mtr. (This variable was before
only in 10.5 and up). It can now have one of two values:
ASAN or UBSAN.
- Moved ~Archive_share() from ha_archive.cc to ha_archive.h and marked
it virtual. This was an effort to get UBSAN to work with loaded storage
engines. I kept the change as the new place is better.
- Added in CONNECT engine COLBLK::SetName(), to get around a wrong cast
in tabutil.cpp.
- Added HAVE_REPLICATION around usage of rgi_slave, to get embedded
server to compile with UBSAN. (Patch from Marko).
- Added #ifdef for powerpc64 to avoid a bug in old gcc versions related
to integer arithmetic.
Changes that should not be needed but had to be done to suppress warnings
from UBSAN:
- Added static_cast<<uint16_t>> around shift to get rid of a LOT of
compiler warnings when using UBSAN.
- Had to change some '/' of 2 base integers to shift to get rid of
some compile time warnings.
Reviewed by:
- Json changes: Alexey Botchkov
- Charset changes in ctype-uca.c: Alexander Barkov
- InnoDB changes & Embedded server: Marko Mäkelä
- sql_acl.cc changes: Vicențiu Ciorbaru
- build_explain() changes: Sergey Petrunia
For DECIMAL[(M[,D])] datatype max_sort_length was not being honoured which was leading to buffer
overflow while making the sort key. The fix to this problem would be to create sort keys for decimals
with atmost max_sort_key bytes
Important:
The minimum value of max_sort_length has been raised to 8 (previously was 4),
so fixed size datatypes like DOUBLE and BIGINIT are not truncated for
lower values of max_sort_length.
In main.index_merge_myisam we remove the test that was added in
commit a2d24def8c because
it duplicates the test case that was added in
commit 5af12e4635.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
Server and command line tools now support option --tls_version to specify the
TLS version between client and server. Valid values are TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3
or a combination of them. E.g.
--tls_version=TLSv1.3
--tls_version=TLSv1.2,TLSv1.3
In case there is a gap between versions, the lowest version will be used:
--tls_version=TLSv1.1,TLSv1.3 -> Only TLSv1.1 will be available.
If the used TLS library doesn't support the specified TLS version, it will use
the default configuration.
Limitations:
SSLv3 is not supported. The default configuration doesn't support TLSv1.0 anymore.
TLSv1.3 protocol currently is only supported by OpenSSL 1.1.0 (client and server) and
GnuTLS 3.6.5 (client only).
Overview of TLS implementations and protocols
Server:
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| WolfSSL | TLSv1.1, TLSv1,2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
Client (MariaDB Connector/C)
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| GnuTLS | (TLSv1.0), TLSv1.1, TLSv1.2, TLSv1.3 |
+-----------+-----------------------------------------+
| Schannel | (TLSv1.0), TLSv1.1, TLSv1.2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
post-merge changes:
* handle password expiration on old tables like everything else -
make changes in memory, even if they cannot be done on disk
* merge "debug" tests with non-debug tests, they don't use dbug anyway
* only run rpl password expiration in MIXED mode, it doesn't replicate
anything, so no need to repeat it thrice
* restore update_user_table_password() prototype, it should not change
ACL_USER, this is done in acl_user_update()
* don't parse json twice in get_password_lifetime and get_password_expired
* remove LEX_USER::is_changing_password, see if there was any auth instead
* avoid overflow in expiration calculations
* don't initialize Account_options in the constructor, it's bzero-ed later
* don't create ulong sysvars - they're not portable, prefer uint or ulonglong
* misc simplifications
This patch adds support for expiring user passwords.
The following statements are extended:
CREATE USER user@localhost PASSWORD EXPIRE [option]
ALTER USER user@localhost PASSWORD EXPIRE [option]
If no option is specified, the password is expired with immediate
effect. If option is DEFAULT, global policy applies according to
the default_password_lifetime system var (if 0, password never
expires, if N, password expires every N days). If option is NEVER,
the password never expires and if option is INTERVAL N DAY, the
password expires every N days.
The feature also supports the disconnect_on_expired_password system
var and the --connect-expired-password client option.
Closes#1166
The variable controls the amount of sampling analyze table performs.
If ANALYZE table with histogram collection is too slow, one can reduce the
time taken by setting analyze_sample_percentage to a lower value of the
total number of rows.
Setting it to 0 will use a formula to compute how many rows to sample:
The number of rows collected is capped to a minimum of 50000 and
increases logarithmically with a coffecient of 4096. The coffecient is
chosen so that we expect an error of less than 3% in our estimations
according to the paper:
"Random Sampling for Histogram Construction: How much is enough?”
– Surajit Chaudhuri, Rajeev Motwani, Vivek Narasayya, ACM SIGMOD, 1998.
The drawback of sampling is that avg_frequency number is computed
imprecisely and will yeild a smaller number than the real one.
Change the defaults:
-histogram_size=0
+histogram_size=254
-histogram_type=SINGLE_PREC_HB
+histogram_type=DOUBLE_PREC_HB
Adjust the testcases:
- Some have ignorable changes in EXPLAIN outputs and
more counter increments due to EITS table reads.
- Testcases that meaningfully depend on the old defaults
are changed to use the old values.
Condition can be pushed from the HAVING clause into the WHERE clause
if it depends only on the fields that are used in the GROUP BY list
or depends on the fields that are equal to grouping fields.
Aggregate functions can't be pushed down.
How the pushdown is performed on the example:
SELECT t1.a,MAX(t1.b)
FROM t1
GROUP BY t1.a
HAVING (t1.a>2) AND (MAX(c)>12);
=>
SELECT t1.a,MAX(t1.b)
FROM t1
WHERE (t1.a>2)
GROUP BY t1.a
HAVING (MAX(c)>12);
The implementation scheme:
1. Extract the most restrictive condition cond from the HAVING clause of
the select that depends only on the fields that are used in the GROUP BY
list of the select (directly or indirectly through equalities)
2. Save cond as a condition that can be pushed into the WHERE clause
of the select
3. Remove cond from the HAVING clause if it is possible
The optimization is implemented in the function
st_select_lex::pushdown_from_having_into_where().
New test file having_cond_pushdown.test is created.
This task involves the implementation for the optimizer trace.
This feature produces a trace for any SELECT/UPDATE/DELETE/,
which contains information about decisions taken by the optimizer during
the optimization phase (choice of table access method, various costs,
transformations, etc). This feature would help to tell why some decisions were
taken by the optimizer and why some were rejected.
Trace is session-local, controlled by the @@optimizer_trace variable.
To enable optimizer trace we need to write:
set @@optimizer_trace variable= 'enabled=on';
To display the trace one can run:
SELECT trace FROM INFORMATION_SCHEMA.OPTIMIZER_TRACE;
This task also involves:
MDEV-18489: Limit the memory used by the optimizer trace
introduces a switch optimizer_trace_max_mem_size which limits
the memory used by the optimizer trace. This was implemented by
Sergei Petrunia.
