2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
The original code comes, as far as I know, from Google (Mark Callaghan's team) with additional work from Percona, Ourdelta and Weldon Whipple.
This code provides the same functionallity, but with a lot of changes to make it faster and better fit the MariaDB infrastucture.
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_sent, Rows_read
Added new variable / startup option 'userstat' to control if user statistics should be enabled or not
Added my_getcputime(); Returns cpu time used by this thread.
New FLUSH commands:
- FLUSH SLOW QUERY LOG
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
New SHOW commands:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
New Information schemas:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Added support for all new flush commands to mysqladmin
Added handler::ha_... wrappers for all handler read calls to do statistics counting
- Changed all code to use new ha_... calls
- Count number of read rows, changed rows and rows read trough an index
Added counting of number of bytes sent to binary log (status variable Binlog_bytes_written)
Added counting of access denied errors (status variable Access_denied_erors)
Bugs fixed:
- Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
- CLOCK_GETTIME was not propely working on Linuxm
client/mysqladmin.cc:
Added support for all new flush commmands and some common combinations:
flush-slow-log
flush-table-statistics
flush-index-statistics
flush-user-statistics
flush-client-statistics
flush-all-status
flush-all-statistics
configure.in:
Added checking if clock_gettime needs the librt.
(Fixes Bug #37639 clock_gettime is never used/enabled in Linux/Unix)
include/my_sys.h:
Added my_getcputime()
include/mysql_com.h:
Added LIST_PROCESS_HOST_LEN & new REFRESH target defines
mysql-test/r/information_schema.result:
New information schema tables added
mysql-test/r/information_schema_all_engines.result:
New information schema tables added
mysql-test/r/information_schema_db.result:
New information schema tables added
mysql-test/r/log_slow.result:
Added testing that flosh slow query logs is accepted
mysql-test/r/status_user.result:
Basic testing of user, client, table and index statistics
mysql-test/t/log_slow.test:
Added testing that flosh slow query logs is accepted
mysql-test/t/status_user-master.opt:
Ensure that we get a fresh restart before running status_user.test
mysql-test/t/status_user.test:
Basic testing of user, client, table and index statistics
mysys/my_getsystime.c:
Added my_getcputime()
Returns cpu time used by this thread.
sql/authors.h:
Updated authors to have core and original MySQL developers first.
sql/event_data_objects.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/event_db_repository.cc:
Changed to use new ha_... calls
sql/filesort.cc:
Changed to use new ha_... calls
sql/ha_partition.cc:
Changed to use new ha_... calls
Fixed comment syntax
sql/handler.cc:
Changed to use new ha_... calls
Reset table statistics
Added code to update global table and index status
Added counting of rows changed
sql/handler.h:
Added table and index statistics variables
Added function reset_statistics()
Added handler::ha_... wrappers for all handler read calls to do statistics counting
Protected all normal read calls to ensure we use the new calls in the server.
Made ha_partition a friend class so that partition code can call the old read functions
sql/item_subselect.cc:
Changed to use new ha_... calls
sql/lex.h:
Added keywords for new information schema tables and flush commands
sql/log.cc:
Added flush_slow_log()
Added counting of number of bytes sent to binary log
Removed not needed test of thd (It's used before, so it's safe to use)
Added THD object to MYSQL_BIN_LOG::write_cache() to simplify statistics counting
sql/log.h:
Added new parameter to write_cache()
Added flush_slow_log() functions.
sql/log_event.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/log_event_old.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/mysql_priv.h:
Updated call to mysql_reset_thd_for_next_command()
Added new statistics functions and variables needed by these.
sql/mysqld.cc:
Added new statistics variables and structures to handle these
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_set, Rows_read
Added new option 'userstat' to control if user statistics should be enabled or not
sql/opt_range.cc:
Changed to use new ha_... calls
sql/opt_range.h:
Changed to use new ha_... calls
sql/opt_sum.cc:
Changed to use new ha_... calls
sql/records.cc:
Changed to use new ha_... calls
sql/set_var.cc:
Added variable 'userstat'
sql/sp.cc:
Changed to use new ha_... calls
sql/sql_acl.cc:
Changed to use new ha_... calls
Added counting of access_denied_errors
sql/sql_base.cc:
Added call to statistics functions
sql/sql_class.cc:
Added usage of org_status_var, to store status variables at start of command
Added functions THD::update_stats(), THD::update_all_stats()
Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
sql/sql_class.h:
Added new status variables to status_var
Moved variables that was not ulong in status_var last.
Added variables to THD for storing temporary values during statistics counting
sql/sql_connect.cc:
Variables and functions to calculate user and client statistics
Added counting of access_denied_errors and lost_connections
sql/sql_cursor.cc:
Changed to use new ha_... calls
sql/sql_handler.cc:
Changed to use new ha_... calls
sql/sql_help.cc:
Changed to use new ha_... calls
sql/sql_insert.cc:
Changed to use new ha_... calls
sql/sql_lex.h:
Added SQLCOM_SHOW_USER_STATS, SQLCOM_SHOW_TABLE_STATS, SQLCOM_SHOW_INDEX_STATS, SQLCOM_SHOW_CLIENT_STATS
sql/sql_parse.cc:
Added handling of:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
Added handling of new FLUSH commands:
- FLUSH SLOW QUERY LOGS
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
Added THD parameter to mysql_reset_thd_for_next_command()
Added initialization and calls to user statistics functions
Added increment of statistics variables empty_queries, rows_sent and access_denied_errors.
Added counting of cpu time per query
sql/sql_plugin.cc:
Changed to use new ha_... calls
sql/sql_prepare.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/sql_select.cc:
Changed to use new ha_... calls
Indentation changes
sql/sql_servers.cc:
Changed to use new ha_... calls
sql/sql_show.cc:
Added counting of access denied errors
Added function for new information schema tables:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Changed to use new ha_... calls
sql/sql_table.cc:
Changed to use new ha_... calls
sql/sql_udf.cc:
Changed to use new ha_... calls
sql/sql_update.cc:
Changed to use new ha_... calls
sql/sql_yacc.yy:
Add new show and flush commands
sql/structs.h:
Add name_length to KEY to avoid some strlen
Added cache_name to KEY for fast storage of keyvalue in cache
Added structs USER_STATS, TABLE_STATS, INDEX_STATS
Added function prototypes for statistics functions
sql/table.cc:
Store db+table+index name into keyinfo->cache_name
sql/table.h:
Added new information schema tables
sql/tztime.cc:
Changed to use new ha_... calls
The flag EXTRA_ACL is used in conjugation with our access checks, yet it is
not clear what impact this flag has.
This is a code clean up which replaces use of EXTRA_ACL with an explicit
function parameter.
The patch also fixes privilege checks for:
- SHOW CREATE TABLE: The new privilege requirement is any privilege on
the table-level.
- CHECKSUM TABLE: Requires SELECT on the table level.
- SHOW CREATE VIEW: Requires SHOW_VIEW and SELECT on the table level
(just as the manual claims)
- SHOW INDEX: Requires any privilege on any column combination.
mysql-test/r/grant.result:
* Error message now shows correct command (SHOW instead of SELECT)
mysql-test/r/grant2.result:
* Error message now shows correct command (SHOW instead of SELECT)
mysql-test/r/grant4.result:
* This test file tests privilege requirements for
SHOW COLUMNS
CREATE TABLE .. LIKE
SHOW CREATE TABLE
SHOW INDEX
CHECKSUM TABLE
SHOW CREATE VIEW
mysql-test/r/information_schema_db.result:
* Added SELECT privilege to testdb_2 as
SHOW CREATE VIEW now demands this privilege
as well as SHOW VIEW.
mysql-test/r/outfile.result:
* Changed error code
mysql-test/r/view_grant.result:
* Additional SELECT privilege is now needed
for SHOW CREATE VIEW
mysql-test/t/grant4.test:
* This test file tests privilege requirements for
SHOW COLUMNS
CREATE TABLE .. LIKE
SHOW CREATE TABLE
SHOW INDEX
CHECKSUM TABLE
SHOW CREATE VIEW
mysql-test/t/information_schema_db.test:
* Added SELECT privilege to testdb_2 as
SHOW CREATE VIEW now demands this privilege
as well as SHOW VIEW.
mysql-test/t/outfile.test:
* Changed error code
mysql-test/t/view_grant.test:
* Additional SELECT privilege is now needed
for SHOW CREATE VIEW
sql/mysql_priv.h:
* Replaced EXTRA_ACL with a parameter
sql/sp_head.cc:
* Replaced EXTRA_ACL with a parameter
sql/sql_acl.cc:
* Converted function documentation to doxygen and clarified some behaviors.
* Changed value from uint to bool to better reflect its meaning.
* Removed pointless variable orig_want_access
* Added function has_any_table_level_privileges to help with requirements
checks during SHOW CREATE TABLE.
sql/sql_acl.h:
* changed signature of check_grant()
* introduced access control function has_any_table_leevl_privileges()
sql/sql_base.cc:
* Check_table_access has new signature
sql/sql_cache.cc:
* Check_table_access has new signature
sql/sql_parse.cc:
* Rewrote function documentation in doxygen comments for: check_access,
check_table_acces, check_grant.
* Removed EXTRA_ACL flag where it doesn't hold any meaningful purpose anymore
and replaced it with a function parameter where any privileges on any column
combination would satisfy the requirement.
* Fixed privilege check for SHOW COLUMNS and SHOW INDEX
* Modified check_table_access to gain clarity in what EXTRA_ACL actually does.
* Modified check_access to gain clarity in what EXTRA_ACL actually does.
* Fixed privilege check for CREATE TABLE .. LIKE .. ; It now requires SELECT
privileges on the table.
* Fixed privilege check for SHOW CREATE TABLE ..; It now requires any privilege
on the table level.
sql/sql_plugin.cc:
* check_table_access has new signature
sql/sql_prepare.cc:
* check_table_access has new signature
sql/sql_show.cc:
* check_table_access has new signature
sql/sql_trigger.cc:
* check_table_access has new signature
sql/sql_update.cc:
* check grant has new signature
sql/sql_view.cc:
* check_table_access has new signature
The flag EXTRA_ACL is used in conjugation with our access checks, yet it is
not clear what impact this flag has.
This is a code clean up which replaces use of EXTRA_ACL with an explicit
function parameter.
The patch also fixes privilege checks for:
- SHOW CREATE TABLE: The new privilege requirement is any privilege on
the table-level.
- CHECKSUM TABLE: Requires SELECT on the table level.
- SHOW CREATE VIEW: Requires SHOW_VIEW and SELECT on the table level
(just as the manual claims)
- SHOW INDEX: Requires any privilege on any column combination.
----------------------------------------------------------
revno: 2630.22.8
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Sun 2008-08-10 18:49:52 +0400
message:
Get rid of typedef struct for the most commonly used types:
TABLE, TABLE_SHARE, LEX. This simplifies use of tags
and forward declarations.
----------------------------------------------------------
revno: 2630.22.8
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Sun 2008-08-10 18:49:52 +0400
message:
Get rid of typedef struct for the most commonly used types:
TABLE, TABLE_SHARE, LEX. This simplifies use of tags
and forward declarations.
buffering is used
FORCE INDEX FOR ORDER BY now prevents the optimizer from
using join buffering. As a result the optimizer can use
indexed access on the first table and doesn't need to
sort the complete resultset at the end of the statement.
buffering is used
FORCE INDEX FOR ORDER BY now prevents the optimizer from
using join buffering. As a result the optimizer can use
indexed access on the first table and doesn't need to
sort the complete resultset at the end of the statement.
The problem is that there is only one autoinc value associated with
the query when binlogging. If more than one autoinc values are used
in the query, the autoinc values after the first one can be inserted
wrongly on slave. So these autoinc values can become inconsistent on
master and slave.
The problem is resolved by marking all the statements that invoke
a trigger or call a function that updated autoinc fields as unsafe,
and will switch to row-format in Mixed mode. Actually, the statement
is safe if just one autoinc value is used in sub-statement, but it's
impossible to check how many autoinc values are used in sub-statement.)
mysql-test/suite/rpl/r/rpl_auto_increment_update_failure.result:
Test result for bug#45677
mysql-test/suite/rpl/t/rpl_auto_increment_update_failure.test:
Added test to verify the following two properties:
P1) insert/update in an autoinc column causes statement to
be logged in row format if binlog_format=mixed
P2) if binlog_format=mixed, and a trigger or function contains
two or more inserts/updates in a table that has an autoinc
column, then the slave should not go out of sync, even if
there are concurrent transactions.
sql/sql_base.cc:
Added function 'has_write_table_with_auto_increment' to check
if one (or more) write tables have auto_increment columns.
Removed function 'has_two_write_locked_tables_with_auto_increment',
because the function is included in function
'has_write_table_with_auto_increment'.
The problem is that there is only one autoinc value associated with
the query when binlogging. If more than one autoinc values are used
in the query, the autoinc values after the first one can be inserted
wrongly on slave. So these autoinc values can become inconsistent on
master and slave.
The problem is resolved by marking all the statements that invoke
a trigger or call a function that updated autoinc fields as unsafe,
and will switch to row-format in Mixed mode. Actually, the statement
is safe if just one autoinc value is used in sub-statement, but it's
impossible to check how many autoinc values are used in sub-statement.)
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
.bzrignore:
WL#4259 - Debug Sync Facility
Added the symbolic link libmysqld/debug_sync.cc.
CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
configure.in:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
include/my_sys.h:
WL#4259 - Debug Sync Facility
Added definition for the DEBUG_SYNC_C macro.
libmysqld/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
libmysqld/Makefile.am:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
mysql-test/include/have_debug_sync.inc:
WL#4259 - Debug Sync Facility
New include file.
mysql-test/mysql-test-run.pl:
WL#4259 - Debug Sync Facility
Added option --debug_sync_timeout.
mysql-test/r/debug_sync.result:
WL#4259 - Debug Sync Facility
New test result.
mysql-test/r/have_debug_sync.require:
WL#4259 - Debug Sync Facility
New require file.
mysql-test/t/debug_sync.test:
WL#4259 - Debug Sync Facility
New test file.
mysys/my_static.c:
WL#4259 - Debug Sync Facility
Added definition for debug_sync_C_callback_ptr.
mysys/thr_lock.c:
WL#4259 - Debug Sync Facility
Added sync point "wait_for_lock".
sql/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/Makefile.am:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/debug_sync.cc:
WL#4259 - Debug Sync Facility
New source file.
sql/debug_sync.h:
WL#4259 - Debug Sync Facility
New header file.
sql/mysqld.cc:
WL#4259 - Debug Sync Facility
Added opt_debug_sync_timeout.
Added calls to debug_sync_init() and debug_sync_end().
Fixed a purecov comment (unrelated).
sql/set_var.cc:
WL#4259 - Debug Sync Facility
Added server variable "debug_sync".
sql/set_var.h:
WL#4259 - Debug Sync Facility
Added declaration for server variable "debug_sync".
sql/share/errmsg.txt:
WL#4259 - Debug Sync Facility
Added error messages ER_DEBUG_SYNC_TIMEOUT and ER_DEBUG_SYNC_HIT_LIMIT.
sql/sql_base.cc:
WL#4259 - Debug Sync Facility
Added sync points "after_flush_unlock" and "before_lock_tables_takes_lock".
sql/sql_class.cc:
WL#4259 - Debug Sync Facility
Added initialization for debug_sync_control to THD::THD.
Added calls to debug_sync_init_thread() and debug_sync_end_thread().
sql/sql_class.h:
WL#4259 - Debug Sync Facility
Added element debug_sync_control to THD.
storage/myisam/myisamchk.c:
Fixed a typo in an error message string (unrelated).
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
binlog-db-db / binlog-ignore-db
InnoDB will return an error if statement based replication is used
along with transaction isolation level READ-COMMITTED (or weaker),
even if the statement in question is filtered out according to the
binlog-do-db rules set. In this case, an error should not be printed.
This patch addresses this issue by extending the existing check in
external_lock to take into account the filter rules before deciding to
print an error. Furthermore, it also changes decide_logging_format to
take into consideration whether the statement is filtered out from
binlog before decision is made.
sql/sql_base.cc:
Changed the check on decide_logging_format to take into account
whether statement is filtered or not in SBR.
sql/sql_class.cc:
Added the thd_binlog_filter_ok to INNODB_COMPATIBILITY_HOOKS set.
storage/innobase/handler/ha_innodb.cc:
Extended check in external_lock to take into consideration the
filtering when deciding to throw an error.
storage/innobase/handler/ha_innodb.h:
Added declaration of new hook.
storage/innodb_plugin/handler/ha_innodb.cc:
Extended check in external_lock to take into consideration the
filtering when deciding to throw an error.
storage/innodb_plugin/handler/ha_innodb.h:
Added declaration of new hook.
binlog-db-db / binlog-ignore-db
InnoDB will return an error if statement based replication is used
along with transaction isolation level READ-COMMITTED (or weaker),
even if the statement in question is filtered out according to the
binlog-do-db rules set. In this case, an error should not be printed.
This patch addresses this issue by extending the existing check in
external_lock to take into account the filter rules before deciding to
print an error. Furthermore, it also changes decide_logging_format to
take into consideration whether the statement is filtered out from
binlog before decision is made.
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
client/mysqlmanager-pwgen.c:
A fix for warn_unused_result, adding fallback to use of
srand()/rand() if /dev/random cannot be used. Also actually
adds calls to rand() in the second branch so that it actually
creates a random password.
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
When a connection is dropped any remaining temporary table is also automatically
dropped and the SQL statement of this operation is written to the binary log in
order to drop such tables on the slave and keep the slave in sync. Specifically,
the current code base creates the following type of statement:
DROP /*!40005 TEMPORARY */ TABLE IF EXISTS `db`.`table`;
Unfortunately, appending the database to the table name in this manner circumvents
the replicate-rewrite-db option (and any options that check the current database).
To solve the issue, we started writing the statement to the binary as follows:
use `db`; DROP /*!40005 TEMPORARY */ TABLE IF EXISTS `table`;
When a connection is dropped any remaining temporary table is also automatically
dropped and the SQL statement of this operation is written to the binary log in
order to drop such tables on the slave and keep the slave in sync. Specifically,
the current code base creates the following type of statement:
DROP /*!40005 TEMPORARY */ TABLE IF EXISTS `db`.`table`;
Unfortunately, appending the database to the table name in this manner circumvents
the replicate-rewrite-db option (and any options that check the current database).
To solve the issue, we started writing the statement to the binary as follows:
use `db`; DROP /*!40005 TEMPORARY */ TABLE IF EXISTS `table`;
Moved decide_logging_format to sql_class.cc
sql/sql_base.cc:
Moved decide_logging_format to sql_class.cc
The auxiliary macro FLAGSTR is not needed here any more.
sql/sql_class.cc:
- Moved decide_logging_format from sql_base.cc to here.
- To avoid copying the FLAGSTR macro, I changed some
DBUG_PRINT to just print flags in hex. No need to
pretty-print debug traces.
- Changed the type of 'flags' to handler::Table_flags
because that's the return type of handler::ha_table_flags.
This is a post-push fix addressing review requests and
problems with extra warnings.
Problem 1: The sub-statement where an unsafe warning was detected was
printed as part of the warning. This was ok for statements that
were unsafe due to, e.g., calls to UUID(), but did not make
sense for statements that were unsafe because there was more than
one autoincrement column (unsafeness in this case comes from the
combination of several sub-statements).
Fix 1: Instead of printing the sub-statement, print an explanation
of why the statement is unsafe.
Problem 2:
When a recursive construct (i.e., stored proceure, stored
function, trigger, view, prepared statement) contained several
sub-statements, and at least one of them was unsafe, there would be
one unsafeness warning per sub-statement - even for safe
sub-statements.
Fix 2:
Ensure that each type of warning is printed at most once, by
remembering throughout the execution of the statement which types
of warnings have been printed.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
- Clarified comment per review request.
- Added checks for the number of warnings in each invocation.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Per review request, replaced @@session.binlog_format by
@@global.binlog_format, since INSERT DELAYED reads the global
variable. (In this test case, the two variables have the same
value, so the change is cosmetic.)
mysql-test/r/sp_trans.result:
updated result file
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_ps.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file. Note that duplicate warnings are now gone.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Added tests for: (1) a statement that is unsafe in many ways;
(2) a statement that is unsafe in the same way several times.
- Use -- style to invoke mysqltest commands.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
updated result file
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Per review request, added comment explaining what the test case
does (copied from rpl_stm_found_rows.test)
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Clarified grammar in comment.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
Updated result file.
sql/item_create.cc:
Made set_stmt_unsafe take one parameter, describing the
type of unsafeness.
sql/sp_head.cc:
Added unsafe_flags field and made it hold all the unsafe flags.
sql/sp_head.h:
- Removed the BINLOG_ROW_BASED_IF_MIXED flag from m_flags.
Instead, we use the new unsafe_flags field to hold the
unsafeness state of the sp.
- Made propagate_attributes() copy all unsafe flags.
sql/sql_base.cc:
- Made LEX::set_stmt_unsafe() take an extra argument.
- Made binlog_unsafe_warning_flags store the type of unsafeness.
- Per review requests, clarified comments
- Added DBUG printouts
sql/sql_class.cc:
- Made warnings be generated in issue_warnings() and call that from
binlog_query(). Wrote issue_warnings(), which prints zero or more
warnings, avoiding to print warnings more than once per statement.
- Per review request, added @todo so that we remember to assert
correct behavior in binlog_query.
sql/sql_class.h:
- Removed BINLOG_WARNING_PRINTED
- Use [set|clear]_current_stmt_binlog_row_based() instead of
modifying the flag directly.
- added issue_unsafe_warnings() (only called from binlog_unsafe)
- Per review request, improved some documentation.
sql/sql_insert.cc:
Added extra argument to LEX::set_stmt_unsafe()
sql/sql_lex.h:
- Added enum_binlog_stmt_unsafe, listing all types of unsafe
statements.
- Per review requests, improved many comments for member
functions.
- Added [get|set]_stmt_unsafe_flags(), which return/set all the
unsafe flags for a statement.
sql/sql_parse.cc:
- Renamed binlog_warning_flags to binlog_unsafe_warning_flags.
- Per review requests, improved comment.
sql/sql_view.cc:
Made views propagate all the new unsafe flags.
sql/sql_yacc.yy:
Added parameter to set_stmt_unsafe().
storage/innobase/handler/ha_innodb.cc:
Per review requests, replaced DBUG_EXECUTE_IF() by DBUG_EVALUATE_IF().
This is a post-push fix addressing review requests and
problems with extra warnings.
Problem 1: The sub-statement where an unsafe warning was detected was
printed as part of the warning. This was ok for statements that
were unsafe due to, e.g., calls to UUID(), but did not make
sense for statements that were unsafe because there was more than
one autoincrement column (unsafeness in this case comes from the
combination of several sub-statements).
Fix 1: Instead of printing the sub-statement, print an explanation
of why the statement is unsafe.
Problem 2:
When a recursive construct (i.e., stored proceure, stored
function, trigger, view, prepared statement) contained several
sub-statements, and at least one of them was unsafe, there would be
one unsafeness warning per sub-statement - even for safe
sub-statements.
Fix 2:
Ensure that each type of warning is printed at most once, by
remembering throughout the execution of the statement which types
of warnings have been printed.
