BY A CONCURRENT TRANSACTIO
The member function QUICK_RANGE_SELECT::init_ror_merged_scan() performs
a table handler clone. Innodb does not provide a clone operation.
The ha_innobase::clone() is not there. The handler::clone() does not
take care of the ha_innobase->prebuilt->select_lock_type. Because of
this what happens is that for one index we do a locking read, and
for the other index we were doing a non-locking (consistent) read.
The patch introduces ha_innobase::clone() member function.
It is implemented similar to ha_myisam::clone(). It calls the
base class handler::clone() and then does any additional operation
required. I am setting the ha_innobase->prebuilt->select_lock_type
correctly.
rb://1060 approved by Marko
The function mysql_show_binlog_events has a local stack variable
'LOG_INFO linfo;', which is assigned to thd->current_linfo, however
this variable goes out of scope and is destroyed before clean
thd->current_linfo.
The problem is solved by moving 'LOG_INFO linfo;' to function scope.
BUG#11761686 insert_id event is not filtered.
Two issues are covered.
INSERT into autoincrement field which is not the first part in the composed primary key
is unsafe by autoincrement logging design. The case is specific to MyISAM engine
because Innodb does not allow such table definition.
However no warnings and row-format logging in the MIXED mode was done, and
that is fixed.
Int-, Rand-, User-var log-events were not filtered along with their parent
query that made possible them to screw up execution context of the following
query.
Fixed with deferring their execution until the parent query.
******
Bug#11754117
Post review fixes.
Currently SHOW MASTER LOGS and SHOW BINARY LOGS require the SUPER
privilege. Monitoring tools (such as MEM) often want to check this
output - for instance MEM generates the SUM of the sizes of the logs
reported here, and puts that in the Replication overview within the MEM
Dashboard.
However, because of the SUPER requirement, these tools often have an
account that holds open the connection whilst monitoring, and can lock
out administrators when the server gets overloaded and reaches
max_connections - there is already another SUPER privileged account
connected, the "monitor".
As SHOW MASTER STATUS, and all other replication related statements,
return with either REPLICATION CLIENT or SUPER privileges, this worklog
is to make SHOW MASTER LOGS and SHOW BINARY LOGS be consistent with this
as well, and allow both of these commands with either SUPER or
REPLICATION CLIENT.
This allows monitoring tools to not require a SUPER privilege any more,
so is safer in overloaded situations, as well as being more secure, as
lighter privileges can be given to users of such tools or scripts.
The test case must insert all the records using a single transaction. Otherwise the test
case takes more than 15 minutes and will time out in pb2 and mtr.
BUG#64503: mysql frequently ignores --relay-log-space-limit
When the SQL thread goes to sleep, waiting for more events, it sets
the flag ignore_log_space_limit to true. This gives the IO thread a
chance to queue some more events and ultimately the SQL thread will be
able to purge the log once it is rotated. By then the SQL thread
resets the ignore_log_space_limit to false. However, between the time
the SQL thread has set the ignore flag and the time it resets it, the
IO thread will be queuing events in the relay log, possibly going way
over the limit.
This patch makes the IO and SQL thread to synchronize when they reach
the space limit and only ask for one event at a time. Thus the SQL
thread sets ignore_log_space_limit flag and the IO thread resets it to
false everytime it processes one more event. In addition, everytime
the SQL thread processes the next event, and the limit has been
reached, it checks if the IO thread should rotate. If it should, it
instructs the IO thread to rotate, giving the SQL thread a chance to
purge the logs (freeing space). Finally, this patch removes the
resetting of the ignore_log_space_limit flag from purge_first_log,
because this is now reset by the IO thread every time it processes the
next event when the limit has been reached.
If the SQL thread is in a transaction, it cannot purge so, there is no
point in asking the IO thread to rotate. The only thing it can do is
to ask for more events until the transaction is over (then it can ask
the IO to rotate and purge the log right away). Otherwise, there would
be a deadlock (SQL would not be able to purge and IO thread would not
be able to queue events so that the SQL would finish the transaction).
truncating, inserting the same set of rows. When a table is
re-created with the same set of rows, the data file size must
not grow.
rb:968
Approved by Marko.
There are two threads. In one thread, dml operation is going on
involving cascaded update operation. In another thread, alter
table add foreign key constraint is happening. Under these
circumstances, it is possible for the dml thread to access a
dict_foreign_t object that has been freed by the ddl thread.
The debug sync test case provides the sequence of operations.
Without fix, the test case will crash the server (because of
newly added assert). With fix, the alter table stmt will return
an error message.
Backporting the fix from MySQL 5.5 to 5.1
rb:961
rb:947
Analysis:
========================
sql_mode "NO_BACKSLASH_ESCAPES": When user want to use backslash as character input,
instead of escape character in a string literal then sql_mode can be set to
"NO_BACKSLASH_ESCAPES". With this mode enabled, backslash becomes an ordinary
character like any other.
SQL_MODE set applies to the current client session. And while creating the stored
procedure, MySQL stores the current sql_mode and always executes the stored
procedure in sql_mode stored with the Procedure, regardless of the server SQL
mode in effect when the routine is invoked.
In the scenario (for which bug is reported), the routine is created with
sql_mode=NO_BACKSLASH_ESCAPES. And routine is executed with the invoker sql_mode
is "" (NOT SET) by executing statement "call testp('Axel\'s')".
Since invoker sql_mode is "" (NOT_SET), the '\' in 'Axel\'s'(argument to function)
is considered as escape character and column "a" (of table "t1") values are
updated with "Axel's". The binary log generated for above update operation is as below,
set sql_mode=XXXXXX (for no_backslash_escapes)
update test.t1 set a= NAME_CONST('var',_latin1'Axel\'s' COLLATE 'latin1_swedish_ci');
While logging stored procedure statements, the local variables (params) used in
statements are replaced with the NAME_CONST(var_name, var_value) (Internal function)
(http://dev.mysql.com/doc/refman/5.6/en/miscellaneous-functions.html#function_name-const)
On slave, these logs are applied. NAME_CONST is parsed to get the variable and its
value. Since, stored procedure is created with sql_mode="NO_BACKSLASH_ESCAPES", the sql_mode
is also logged in. So that at slave this sql_mode is set before executing the statements
of routine. So at slave, sql_mode is set to "NO_BACKSLASH_ESCAPES" and then while
parsing NAME_CONST of string variable, '\' is considered as NON ESCAPE character
and parsing reported error for "'" (as we have only one "'" no backslash).
At slave, parsing was proper with sql_mode "NO_BACKSLASH_ESCAPES".
But above error reported while writing bin log, "'" (of Axel's) is escaped with
"\" character. Actually, all special characters (n, r, ', ", \, 0...) are escaped
while writing NAME_CONST for string variable(param, local variable) in bin log
Airrespective of "NO_BACKSLASH_ESCAPES" sql_mode. So, basically, the problem is
that logging string parameter does not take into account sql_mode value.
Fix:
========================
So when sql_mode is set to "NO_BACKSLASH_ESCAPES", escaping characters as
(n, r, ', ", \, 0...) should be avoided. To do so, added a check to not to
escape such characters while writing NAME_CONST for string variables in bin
log.
And when sql_mode is set to NO_BACKSLASH_ESCAPES, quote character "'" is
represented as ''.
http://dev.mysql.com/doc/refman/5.6/en/string-literals.html (There are several
ways to include quote characters within a string: )
Suppress innodb_bug34300 from failing if InnoDB prints:
120221 11:05:03 InnoDB: ERROR: the age of the last checkpoint is 9439048,
InnoDB: which exceeds the log group capacity 9433498.
by default the log capacity is 2 log files, 5 MB each.
This bug was originally filed and fixed as Bug#12612184. The original
fix was buggy, and it was patched by Bug#12704861. Also that patch was
buggy (potentially breaking crash recovery), and both fixes were
reverted.
This fix was not ported to the built-in InnoDB of MySQL 5.1, because
the function signatures of many core functions are different from
InnoDB Plugin and later versions. The block allocation routines and
their callers would have to changed so that they handle block
descriptors instead of page frames.
When a record is updated so that its size grows, non-updated columns
can be selected for external (off-page) storage. The bug is that the
initially inserted updated record contains an all-zero BLOB pointer to
the field that was not updated. Only after the BLOB pages have been
allocated and written, the valid pointer can be written to the record.
Between the release of the page latch in mtr_commit(mtr) after
btr_cur_pessimistic_update() and the re-latching of the page in
btr_pcur_restore_position(), other threads can see the invalid BLOB
pointer consisting of 20 zero bytes. Moreover, if the system crashes
at this point, the situation could persist after crash recovery, and
the contents of the non-updated column would be permanently lost.
The problem is amplified by the ROW_FORMAT=DYNAMIC and
ROW_FORMAT=COMPRESSED that were introduced in
innodb_file_format=barracuda in InnoDB Plugin, but the bug does exist
in all InnoDB versions.
The fix is as follows. After a pessimistic B-tree operation that needs
to write out off-page columns, allocate the pages for these columns in
the mini-transaction that performed the B-tree operation (btr_mtr),
but write the pages in a separate mini-transaction (blob_mtr). Do
mtr_commit(blob_mtr) before mtr_commit(btr_mtr). A quirk: Do not reuse
pages that were previously freed in btr_mtr. Only write the off-page
columns to 'fresh' pages.
In this way, crash recovery will see redo log entries for blob_mtr
before any redo log entry for btr_mtr. It will apply the BLOB page
writes to pages that were marked free at that point. If crash recovery
fails to see all of the btr_mtr redo log, there will be some
unreachable BLOB data in free pages, but the B-tree will be in a
consistent state.
btr_page_alloc_low(): Renamed from btr_page_alloc(). Add the parameter
init_mtr. Return an allocated block, or NULL. If init_mtr!=mtr but
the page was already X-latched in mtr, do not initialize the page.
btr_page_alloc(): Wrapper for btr_page_alloc_for_ibuf() and
btr_page_alloc_low().
btr_page_free(): Add a debug assertion that the page was a B-tree page.
btr_lift_page_up(): Return the father block.
btr_compress(), btr_cur_compress_if_useful(): Add the parameter ibool
adjust, for adjusting the cursor position.
btr_cur_pessimistic_update(): Preserve the cursor position when
big_rec will be written and the new flag BTR_KEEP_POS_FLAG is defined.
Remove a duplicate rec_get_offsets() call. Keep the X-latch on
index->lock when big_rec is needed.
btr_store_big_rec_extern_fields(): Replace update_inplace with
an operation code, and local_mtr with btr_mtr. When not doing a
fresh insert and btr_mtr has freed pages, put aside any pages that
were previously X-latched in btr_mtr, and free the pages after
writing out all data. The data must be written to 'fresh' pages,
because btr_mtr will be committed and written to the redo log after
the BLOB writes have been written to the redo log.
btr_blob_op_is_update(): Check if an operation passed to
btr_store_big_rec_extern_fields() is an update or insert-by-update.
fseg_alloc_free_page_low(), fsp_alloc_free_page(),
fseg_alloc_free_extent(), fseg_alloc_free_page_general(): Add the
parameter init_mtr. Return an allocated block, or NULL. If
init_mtr!=mtr but the page was already X-latched in mtr, do not
initialize the page.
xdes_get_descriptor_with_space_hdr(): Assert that the file space
header is being X-latched.
fsp_alloc_from_free_frag(): Refactored from fsp_alloc_free_page().
fsp_page_create(): New function, for allocating, X-latching and
potentially initializing a page. If init_mtr!=mtr but the page was
already X-latched in mtr, do not initialize the page.
fsp_free_page(): Add ut_ad(0) to the error outcomes.
fsp_free_page(), fseg_free_page_low(): Increment mtr->n_freed_pages.
fsp_alloc_seg_inode_page(), fseg_create_general(): Assert that the
page was not previously X-latched in the mini-transaction. A file
segment or inode page should never be allocated in the middle of an
mini-transaction that frees pages, such as btr_cur_pessimistic_delete().
fseg_alloc_free_page_low(): If the hinted page was allocated, skip the
check if the tablespace should be extended. Return NULL instead of
FIL_NULL on failure. Remove the flag frag_page_allocated. Instead,
return directly, because the page would already have been initialized.
fseg_find_free_frag_page_slot() would return ULINT_UNDEFINED on error,
not FIL_NULL. Correct a bogus assertion.
fseg_alloc_free_page(): Redefine as a wrapper macro around
fseg_alloc_free_page_general().
buf_block_buf_fix_inc(): Move the definition from the buf0buf.ic to
buf0buf.h, so that it can be called from other modules.
mtr_t: Add n_freed_pages (number of pages that have been freed).
page_rec_get_nth_const(), page_rec_get_nth(): The inverse function of
page_rec_get_n_recs_before(), get the nth record of the record
list. This is faster than iterating the linked list. Refactored from
page_get_middle_rec().
trx_undo_rec_copy(): Add a debug assertion for the length.
trx_undo_add_page(): Return a block descriptor or NULL instead of a
page number or FIL_NULL.
trx_undo_report_row_operation(): Add debug assertions.
trx_sys_create_doublewrite_buf(): Assert that each page was not
previously X-latched.
page_cur_insert_rec_zip_reorg(): Make use of page_rec_get_nth().
row_ins_clust_index_entry_by_modify(): Pass BTR_KEEP_POS_FLAG, so that
the repositioning of the cursor can be avoided.
row_ins_index_entry_low(): Add DEBUG_SYNC points before and after
writing off-page columns. If inserting by updating a delete-marked
record, do not reposition the cursor or commit the mini-transaction
before writing the off-page columns.
row_build(): Tighten a debug assertion about null BLOB pointers.
row_upd_clust_rec(): Add DEBUG_SYNC points before and after writing
off-page columns. Do not reposition the cursor or commit the
mini-transaction before writing the off-page columns.
rb:939 approved by Jimmy Yang
GRACEFUL SHUTDOWN
During startup mysql picks up .frm files from the tmpdir directory and
tries to drop those tables in the storage engine.
The problem is that when tmpdir ends in / then ha_innobase::delete_table()
is passed a string like "/var/tmp//#sql123", then it wrongly normalizes it
to "/#sql123" and calls row_drop_table_for_mysql() which of course fails
to delete the table entry from the InnoDB dictionary cache.
ha_innobase::delete_table() returns an error but nevertheless mysql wipes
away the .frm file and the entry in the InnoDB dictionary cache remains
orphaned with no easy way to remove it.
The "no easy" way to remove it is to create a similar temporary table again,
copy its .frm file to tmpdir under "#sql123.frm" and restart mysqld with
tmpdir=/var/tmp (no trailing slash) - this way mysql will pick the .frm file
after restart and will try to issue drop table for "/var/tmp/#sql123"
(notice do double slash), ha_innobase::delete_table() will normalize it to
"tmp/#sql123" and row_drop_table_for_mysql() will successfully remove the
table entry from the dictionary cache.
The solution is to fix normalize_table_name_low() to normalize things like
"/var/tmp//table" correctly to "tmp/table".
This patch also adds a test function which invokes
normalize_table_name_low() with various inputs to make sure it works
correctly and a mtr test that calls this test function.
Reviewed by: Marko (http://bur03.no.oracle.com/rb/r/929/)
Test extra/rpl_tests/rpl_extra_col_master.test (used by
rpl_extra_col_master_*) ends with the active connection pointing to the
slave. Thus, the two last tests never succeed in changing the binlog
format of the master away from 'row'. With correct active connection
(master) tests fail for binlog 'statement' and 'mixed' formats.
Tests rpl_extra_col_master_* only run when binary log format is
row. Statement and mix replication do not make sense in this
tests since it will try to execute statements on columns that do
not exist. This fix is basically a backport from mysql-5.5, see
changes done as part of BUG 39934.
If we meet DB_TOO_MANY_CONCURRENT_TRXS during the execution tab_create_graph from row_create_table_for_mysql(), .ibd file for the table should be created already but was not deleted for the error handling.
rb:875 approved by Jimmy Yang
CREATE TABLE bug13510739 (c INTEGER NOT NULL, PRIMARY KEY (c)) ENGINE=INNODB;
INSERT INTO bug13510739 VALUES (1), (2), (3), (4);
DELETE FROM bug13510739 WHERE c=2;
HANDLER bug13510739 OPEN;
HANDLER bug13510739 READ `primary` = (2);
HANDLER bug13510739 READ `primary` NEXT; <-- crash
The bug is that in the particular testcase row_search_for_mysql() picked up
a delete-marked record and quit, leaving the cursor non-positioned state and
on the subsequent 'get next' call the code crashed because of the
non-positioned cursor.
In row0sel.cc (line numbers from mysql-trunk):
4653 if (rec_get_deleted_flag(rec, comp)) {
...
4679 if (index == clust_index && unique_search) {
4680
4681 err = DB_RECORD_NOT_FOUND;
4682
4683 goto normal_return;
4684 }
it quit from here, not storing the cursor position.
In contrast, if the record=2 is not found at all (e.g. sleep(1) after DELETE
to let the purge wipe it away completely) then 'get = 2' does find record=3
and quits from here:
4366 if (0 != cmp_dtuple_rec(search_tuple, rec, offsets)) {
...
4394 btr_pcur_store_position(pcur, &mtr);
4395
4396 err = DB_RECORD_NOT_FOUND;
4397 #if 0
4398 ut_print_name(stderr, trx, FALSE, index->name);
4399 fputs(" record not found 3\n", stderr);
4400 #endif
4401
4402 goto normal_return;
Another fix could be to extend the condition on line 4366 to hold only if
seach_tuple matches rec AND if rec is not delete marked.
Notice that in the above test case if we wait about 1 second somewhere after
DELETE and before 'get = 2', then the testcase does not crash and returns 4
instead. Not sure if this is the correct behavior, but this bugfix removes
the crash and makes the code return what it also returns in the non-crashing
case (if rec=2 is not found during 'get = 2', e.g. we have sleep(1) there).
Approved by: Marko (http://bur03.no.oracle.com/rb/r/863/)
The counter handler_read_key (SSV::ha_read_key_count) is incremented
incorrectly.
The mysql server maintains a per thread system_status_var (SSV)
object. This object contains among other things the counter
SSV::ha_read_key_count. The purpose of this counter is to measure the
number of requests to read a row based on a key (or the number of
index lookups).
This counter was wrongly incremented in the
ha_innobase::innobase_get_index(). The fix removes
this increment statement (for both innodb and innodb_plugin).
The various callers of the innobase_get_index() was checked to
determine if anybody must increment this counter (if they first call
innobase_get_index() and then perform an index lookup). It was found
that no caller of innobase_get_index() needs to worry about the
SSV::ha_read_key_count counter.
rb://816
approved by: Marko Makela
The title is misleading. This bug was actually introduced by
bug 12635227 and was unearthed by a later optimization.
We need to free buf_page_t structs that we are allocating using
malloc() at shutdown.
The bug was accidentally fixed by fixing
Bug#11759688 52020: InnoDB can still deadlock on just INSERT...ON DUPLICATE KEY
a.k.a. the reintroduction of
Bug#7975 deadlock without any locking, simple select and update
a.k.a. Bug#7975 deadlock without any locking, simple select and update
Bug#7975 was reintroduced when the storage engine API was made
pluggable in MySQL 5.1. Instead of looking at thd->lex directly, we
rely on handler::extra(). But, we were looking at the wrong extra()
flag, and we were ignoring the TRX_DUP_REPLACE flag in places where we
should obey it.
innodb_replace.test: Add tests for hopefully all affected statement
types, so that bug should never ever resurface. This kind of tests
should have been added when fixing Bug#7975 in MySQL 5.0.3 in the
first place.
rb:806 approved by Sunny Bains
This was an attempt to address problems with the Bug#12612184 fix.
Even with this follow-up fix, crash recovery can be broken.
Let us fix the bug later.
In the ON UPDATE CASCADE clause of FOREIGN KEY constraints, the
calculated update vector was not fully initialized. This bug was
introduced in the InnoDB Plugin when implementing support for
ROW_FORMAT=DYNAMIC.
Additionally, the data type information was not initialized, but
apparently it has never been needed in this case. Nevertheless, it is
not good programming practice to pass uninitialized values around.
calc_row_difference(): Declare the update field uninitialized in
Valgrind. Copy the data type information as well, except when the
field is SQL NULL. In the built-in InnoDB, initialize
ufield->extern_storage = FALSE (an initialization bug that had gone
unnoticed this far). The InnoDB Plugin and later have this flag to
dfield_t and have always initialized it properly.
row_ins_cascade_calc_update_vec(): Reduce the scope of some
pointers. Initialize orig_len. (This caused the bug in InnoDB Plugin
and later.)
row_ins_foreign_check_on_constraint(): Simplify a condition. Declare
the update vector uninitialized.
rb:771 approved by Jimmy Yang
PARENT FOR OTHER ONE
Do not try to lookup key_nr'th key in 'table' because there may not be such
a key there. key_nr is the number of the key in the _child_ table name, not
in the parent table.
Instead just print the fields of the record that are covered by the first key
defined on the parent table.
This bug gets a better fix in MySQL 5.6, which is too risky for 5.1 and 5.5.
Approved by: Jon Olav Hauglid (via IM)
