Rowid Filter check is just like Index Condition Pushdown check: before
we check the filter, we must check if we have walked out of the range
we are scanning. (If we did, we should return, and not continue the scan).
Consequences of this:
- Rowid filtering doesn't work for keys that have partially-covered
blob columns (just like Index Condition Pushdown)
- The rowid filter function has three return values: CHECK_POS (passed)
CHECK_NEG (filtered out), CHECK_OUT_OF_RANGE.
All of the above is implemented in this patch
Prototype change:
- virtual ha_rows records_in_range(uint inx, key_range *min_key,
- key_range *max_key)
+ virtual ha_rows records_in_range(uint inx, const key_range *min_key,
+ const key_range *max_key,
+ page_range *res)
The handler can ignore the page_range parameter. In the case the handler
updates the parameter, the optimizer can deduce the following:
- If previous range's last key is on the same block as next range's first
key
- If the current key range is in one block
- We can also assume that the first and last block read are cached!
This can be used for a better calculation of IO seeks when we
estimate the cost of a range index scan.
The parameter is fully implemented for MyISAM, Aria and InnoDB.
A separate patch will update handler::multi_range_read_info_const() to
take the benefits of this change and also remove the double
records_in_range() calls that are not anymore needed.
MDEV-19486 and one more similar bug appeared because handler::write_row() interface
welcomes to modify buffer by storage engine. But callers are not ready for that
thus bugs are possible in future.
handler::write_row():
handler::ha_write_row(): make argument const
make live checksum to be returned in handler::info(),
and slow table-scan checksum to be calculated in handler::checksum().
part of
MDEV-16249 CHECKSUM TABLE for a spider table is not parallel and saves all data in memory in the spider head by default
This patch contains a full implementation of the optimization
that allows to use in-memory rowid / primary filters built for range
conditions over indexes. In many cases usage of such filters reduce
the number of disk seeks spent for fetching table rows.
In this implementation the choice of what possible filter to be applied
(if any) is made purely on cost-based considerations.
This implementation re-achitectured the partial implementation of
the feature pushed by Galina Shalygina in the commit
8d5a11122c.
Besides this patch contains a better implementation of the generic
handler function handler::multi_range_read_info_const() that
takes into account gaps between ranges when calculating the cost of
range index scans. It also contains some corrections of the
implementation of the handler function records_in_range() for MyISAM.
This patch supports the feature for InnoDB and MyISAM.
Benefits of this patch:
- Removed a lot of calls to strlen(), especially for field_string
- Strings generated by parser are now const strings, less chance of
accidently changing a string
- Removed a lot of calls with LEX_STRING as parameter (changed to pointer)
- More uniform code
- Item::name_length was not kept up to date. Now fixed
- Several bugs found and fixed (Access to null pointers,
access of freed memory, wrong arguments to printf like functions)
- Removed a lot of casts from (const char*) to (char*)
Changes:
- This caused some ABI changes
- lex_string_set now uses LEX_CSTRING
- Some fucntions are now taking const char* instead of char*
- Create_field::change and after changed to LEX_CSTRING
- handler::connect_string, comment and engine_name() changed to LEX_CSTRING
- Checked printf() related calls to find bugs. Found and fixed several
errors in old code.
- A lot of changes from LEX_STRING to LEX_CSTRING, especially related to
parsing and events.
- Some changes from LEX_STRING and LEX_STRING & to LEX_CSTRING*
- Some changes for char* to const char*
- Added printf argument checking for my_snprintf()
- Introduced null_clex_str, star_clex_string, temp_lex_str to simplify
code
- Added item_empty_name and item_used_name to be able to distingush between
items that was given an empty name and items that was not given a name
This is used in sql_yacc.yy to know when to give an item a name.
- select table_name."*' is not anymore same as table_name.*
- removed not used function Item::rename()
- Added comparision of item->name_length before some calls to
my_strcasecmp() to speed up comparison
- Moved Item_sp_variable::make_field() from item.h to item.cc
- Some minimal code changes to avoid copying to const char *
- Fixed wrong error message in wsrep_mysql_parse()
- Fixed wrong code in find_field_in_natural_join() where real_item() was
set when it shouldn't
- ER_ERROR_ON_RENAME was used with extra arguments.
- Removed some (wrong) ER_OUTOFMEMORY, as alloc_root will already
give the error.
TODO:
- Check possible unsafe casts in plugin/auth_examples/qa_auth_interface.c
- Change code to not modify LEX_CSTRING for database name
(as part of lower_case_table_names)
This was done to make it clear that a update_row() should not change the
row.
This was not done for handler::write_row() as this function still needs
to update auto_increment values in the row. This should at some point
be moved to handler::ha_write_row() after which write_row can also have
const arguments.
* don't issue an error for ER_KEY_BASED_ON_GENERATED_VIRTUAL_COLUMN
* support keyread on vcols
* callback into the server to compute vcol values from mi_check/mi_repair
* DMLs just work. Automatically.
The patch lifts the limitation of the current implementation
of ALTER TABLE that does not allow to build unique/primary
indexes by sort for MyISAM and Aria engines.
- index_merge/intersection is unable to work on GIS indexes, because:
1. index scans have no Rowid-Ordered-Retrieval property
2. When one does an index-only read over a GIS index, they do not
get the index tuple, because index only contains bounding box of the geometry.
This is why key_copy() call crashed.
This patch fixes#1, which makes the problem go away. Theoretically, it would
be nice to check #2, too, but SE API semantics is not sufficiently precise to do it.
Fixed failing tests in sys_vars as we have now stricter checking of setting of variables.
mysql-test/suite/sys_vars/r/innodb_adaptive_flushing_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_adaptive_hash_index_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_large_prefix_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_random_read_ahead_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_stats_on_metadata_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_strict_mode_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_support_xa_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_table_locks_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_master_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_slave_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_flushing_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_hash_index_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_large_prefix_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_random_read_ahead_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_stats_on_metadata_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_strict_mode_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_support_xa_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_table_locks_basic.test:
One can now only assign 0 or 1 to boolean variables
mysys/my_getsystime.c:
Merge + fixed bug that __NR_clock_gettime didn't work in 5.5
The issue was that check/optimize/anaylze did not zerofill the table before they started to work on it.
Added one more element to not often used function handler::auto_repair() to allow handler to decide when to auto repair.
mysql-test/suite/maria/r/maria-autozerofill.result:
Test case for lp:944422
mysql-test/suite/maria/t/maria-autozerofill.test:
Test case for lp:944422
sql/ha_partition.cc:
Added argument to auto_repair()
sql/ha_partition.h:
Added argument to auto_repair()
sql/handler.h:
Added argument to auto_repair()
sql/table.cc:
Let auto_repair() decide which errors to trigger auto-repair
storage/archive/ha_archive.h:
Added argument to auto_repair()
storage/csv/ha_tina.h:
Added argument to auto_repair()
storage/maria/ha_maria.cc:
Give better error & warning messages for auto-repaired tables.
storage/maria/ha_maria.h:
Added argument to auto_repair()
Always auto-repair in case of moved table.
storage/maria/ma_open.c:
Remove special handling of HA_ERR_OLD_FILE (this is now handled in auto_repair())
storage/myisam/ha_myisam.h:
Added argument to auto_repair()
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
ON 64 BIT MACHINES
PROBLEM: When sorting index during repair of
myisam tables, due to improper casting
of buffer size variables value of myisam_
sort_buffer_size is not set greater than
4GB.
SOLUTION: Proper casting of buffer size variable.
myisam_buffer_size changed to unsigned
long long to handle size > 4GB on
linux as well as windows.
Honor unique/not unique when creating keys for internal tempory tables.
Added new variables to be used to limit how keys are created for internal temporary tables.
include/maria.h:
Added maria_max_key_length() and maria_max_key_segments()
include/myisam.h:
Added myisam_max_key_length() and myisam_max_key_segments()
mysql-test/r/mysql.result:
Drop all used tables
mysql-test/r/subselect4.result:
Added test case for lp:879939
mysql-test/t/mysql.test:
Drop all used tables
mysql-test/t/subselect4.test:
Added test case for lp:879939
sql/mysql_priv.h:
Added internal_tmp_table_max_key_length and internal_tmp_table_max_key_segments to be used to limit how keys for derived tables are created.
sql/mysqld.cc:
Added internal_tmp_table_max_key_length and internal_tmp_table_max_key_segments to be used to limit how keys for derived tables are created.
sql/share/errmsg.txt:
Added new error message for internal errors
sql/sql_select.cc:
Give error if we try to create a wrong key (this error should never happen)
Honor unique/not unique when creating keys for internal tempory tables.
storage/maria/ha_maria.cc:
Added change_table_ptr() to ensure that external_ref points always to the correct table.
(Not having this caused an assert in the included test)
storage/maria/ha_maria.h:
Added change_table_ptr() to ensure that external_ref points always to the correct table.
storage/maria/ma_check.c:
Fixed bug in Duplicate key error printing (now row position is printed correctly)
storage/maria/ma_create.c:
maria_max_key_length() -> _ma_max_key_length()
storage/maria/ma_info.c:
Added extern function maria_max_key_length() to calculate the max key length based on current block size.
storage/maria/ma_open.c:
maria_max_key_length() -> _ma_max_key_length()
storage/maria/maria_def.h:
maria_max_key_length() -> _ma_max_key_length()
storage/myisam/ha_myisam.cc:
Added change_table_ptr() to ensure that external_ref points always to the correct table.
(Not having this caused an assert in the included test)
storage/myisam/ha_myisam.h:
Added change_table_ptr() to ensure that external_ref points always to the correct table.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
